Plastic Additives

Chemical name: Triethylene glycol bis[3-(3-tert-butyl-4-hydroxy-5-methyl phenyl) CAS No.：36443-68-2 Molecular formular: C34H50O8 Molecular weight：586.8 Molecular structure Specification Appearance: White powder Melting point，℃：76-79 Ash, %：≤0.1 Volatility, %：≤0.5 Assay, %：≥98.0 Transmittance 425nm≥95% 500nm≥97% Solubility (20℃, g/100g solvent) Acetone＞50 Benzene:18 Chloroform＞40 Ethanol:10 Ethyl Acetate:37 Hexane ＜0.1 Methanol:12 Methylene Chloride ＞40 Toluene:6 Styrene:6 Water＜0.001 Application ANTIOXIDANT HONOX-245 is a partially- hindered phenolic antioxidant that provides excellent processing and long term thermal stability. It is mainly used in the processing and improvement of long-term thermal stability of styrene polymer such as HIPS, MBS and ABS, engineering plastic such as POM, PA and polyurethane . It is also an effective chain terminator in PVC polymerizations. It can be added into monomers before polymerization when it is used for HIPS and PVC. It can be used with benzotriazoles or HALS for thermal and light stabilization in outdoor use. It exhibits a synergistic effect when it is used in combination with thioester antioxidants. info at hhochem.com

Chemical name: 3,9-bis{2-[3-(3-tert-butyl-4-hydroxy-5- methylp , henyl)propionyloxy]-1,1-dimethyl}-2,4,8,10-tetraox , aspiro[5,5]undecane CAS No.：90498-90-1 Molecular formula：C43H64O10 Molecular weight：740.97 Molecular structure Specification Appearance：White Powder Assay, %: ≥ 98 Melting point，℃：112.5 - 116 Ash, %：≤ 0.1 Transmittance: 425nm ≥ 96% 500nm ≥ 98% Application ANTIOXIDANT HONOX-80 is highly efficient radical scavenger, exceptional processing and long-term heat stabilization. It has excellent resistance to discoloration and particularly against NOx gas. It is used for Polyolefins (PE, PP, TPO), Engineering plastics (PBT, Polyacetal, Polyamide), Styrene polymers (HIPS, ABS), Polyurethane fiber, TPU, Latex and unsaturated Elastomers. Excellent synergistic effect to long term heat stability with thioether secondary antioxidant like DSTDP,DLTDP. info at hhochem.com

Chemical name： 4,4’-Thiobis(2-t-butyl-5-methylphenol) CAS No.：96-69-5 Molecular formula：C22H30O2S Molecular weight：359 Molecular structure Specification Appearance：White crystalline powder Assay, %: ≥ 98.50 Melting point，℃：160-164 Loss on drying (100deg C 4hrs), %: 0.10max. Ash content,%：0.05max. Chloride,%: 0.2max. Iron content (as Fe)(ppm): 10.0max. Fineness (residue on 425um),%:0.5 max. Solubility (25℃, g/100g solvent) Water＜0.1 Acetone＞50 Methanol＞50 n-Hexane:0.1 Ethyl Acetate＞50 Application ANTIOXIDANT HONOX-300 is a highly efficient and multi-functional sulfur containing hindered phenolic antioxidant. It possesses excellent structure and dual effects of main and auxiliary antioxidants. It can achieve good synergistic effects when combined with carbon black. It can obtain a unique effect when utilized in polyethylene pipe materials with high density, black polyethylene materials for outdoor use and polyethylene wire and cable materials including communication cable sheathing materials, insulation materials and semi-conductive shielding material. It has a specially effect on polyethylene electrical wire, cable or cross linking polyethylene cable. It is the special antioxidant for polyethylene cable materials. It is also widely used in plastics, rubber and oil products, such as polyethylene, polypropylene, natural rubber, latex, diesel oil, lubricating oil. info at hhochem.com

Chemical name: Pentaerythritol tetrakis(2-cyano-3,3-diphenylacrylate) CAS No.: 178671-58-4 Molecular formula: C69H48N4O8 Molecular weight: 1061.14 Molecular structure Specification Appearance: White crystalline powder Assay, %: ≥98.5 Melting point :175-178 degree Loss on Drying, %: ≤0.5 Transmittance: 460nm≥95% 500nm≥98% Application UV ABSORBER HOSORB UV 3030 can strongly absorb UV wavelength in range 280-320nm and exhibits excellent heat stability and minimum volatility due to its high molecular weight. It can be used to stabilize polymers with high extrusion temperatures. It is suitable for PA and PET. Especially suitable for stabilizing polycarbonates due to the good compatibility with the production process and excellent stabilizing effect.

Product Description The English abbreviation of hydroxypropyl methylcellulose is HPMC, which is a non-ionic cellulose ether with a molecular formula of C56H108O30. CAS 9004-65- 3, odorless, tasteless, white powder. Hydroxypropyl methylcellulose (HPMC) absorbs moisture after drying but is stable. The solution is stable at pH 3-11. As the temperature increases, the viscosity of the solution decreases. Heating-cooling can reversibly transform HPMC from a solution state to a gel state. According to different grades and concentrations, the gel temperature is 50～90℃. HPMC water solution has anti- enzyme effect and maintains good viscosity stability during long-term storage. However, its aqueous solution is susceptible to microbial attack, so preservatives should be added during storage. When HPMC is used as a thickening agent in eye drops, benzalkonium chloride is usually added as a preservative.

Product Description HPMC is made from mature polymer cellulose through a series of chemical processing. It is used in various applications in the construction, food, pharmaceutical and personal care industries. Depending on the application, it can be used as a thickener, adhesive, film-forming agent, water-retaining agent, suspending agent and lubricant. HPMC Features HPMC use for Water Retention: maximized water content in slurry. Anti-sagging: when spreading a thicker coat corrugation can be avoided. Increased mortar yield: depending on the weight of the dry mixture and appropriate formulation, HPMC can increase the mortar volume. Exterior Insulation and Finish System ( EIFS ) Improved adhesion. Good wetting ability for EPS board and substrate. Reduced air entrancement and water uptake

Take the required amount of hot water into the container and heat to above 85., stir slowly and add the product gradually The cellulose initially floats on the water, but gradually disperses in water and forms homogeneous slurry. Hydroxypropyl Methylcellulose Description No primer or curing required thus there is considerable cost saving Protects expensive paints from moisture and flaking Highly durable and water resistant Prevents the growth of algae and fungus Economical and long lasting Dissolution Method(HPMC) 1. Take the required amount of hot water into the container and heat to above 85., stir slowly and add the product gradually The cellulose initially floats on the water, but gradually disperses in water and forms homogeneous slurry. Goon stirring until it cools down and becomes clear 2. Another way is by heating the amount of 1/3 or 2/3 water to above 85℃, add the cellulose to obtain hot slurry, then add the remaining cold water and keep stirring, the mixture is obtained when the slurry cools to about 20 ℃

Product Description Have a long open time and High strength formula Ultimate flexibility Improved shock and impact resistance Can withstand thermal stress Improved adhesion and sliding resistance: especially for heavy tiles. Better workability: lubricity and plasticity of plaster is ensured, mortar can be applied easier and quicker. Easy to install – fast and economical. Hassle-free and long lasting. Main Uses This product is industrial grade HPMC, mainly used as the dispersing agent for PVC production and as the main assistant used in producing PVC suspension polymerization, It is also used as thickener, stabilizer, emulsifier, excipient, water retention agent, and film-forming agent etc. in producing petrochemicals, building materials, paint removers, agricultural chemicals, inks, textiles, ceramics, paper. cosmetics and other products. In terms of the application in synthetic resin, it can make the products loose with regular particles, appropriate apparent gravity and good processing properties, which almost replaces gelatin and polyvinyl alcohol as dispersant. Another use is in the construction process industries, mainly for mechanized construction like building walls, stuccoing and caulking: with high adhesive strength, it can also reduce cement dosage, especially in decorative construction for pasting tiles, marble and plastic trim.

Product Description VAE Powder VAE Powder has extremely outstanding bonding strength, improve the flexibility of mortar and have a long opening time, give the mortar excellent alkaline resistance, improve the mortar adhesion, flexural strength, water resistance, plasticity, wear resistance and construction, in the flexible anti-crack mortar more has a strong flexibility. And has Good film forming ability, the film will be a variety of sand aggregate adhesive tightly cemented together, forming a dense non-stratified slurry, and finally improve the mortar bond strength and flexibility, and various substrate high adhesion, weather resistance and impact resistance!

Product Description RDP (Redispersible Polymer Powder) has extremely outstanding bonding strength, improve the flexibility of mortar and have a long opening time, give the mortar excellent alkaline resistance, improve the mortar adhesion, flexural strength, water resistance, plasticity, wear resistance and construction, in the flexible anti-crack mortar more has a strong flexibility. And has Good film forming ability, the film will be a variety of sand aggregate adhesive tightly cemented together, forming a dense non-stratified slurry, and finally improve the mortar bond strength and flexibility, and various substrate high adhesion, weather resistance and impact resistance!

Product Description VAE RDP Redispersible Emulsion Powder for Construction Manufacturer Water retention: increase water retention to prevent cracking and hardening of cement building materials. Adhesion: improved plasticity, better bond substrate and adhesive. Anti-slip: increase the thickening property to prevent slip between the substrate and the bonded material. Our company is a leading China VAE manufacturer, supplier and exporter. Adhering to the pursuit of perfect quality of products, so that our VAE have been satisfied by many customers. Extreme design, quality raw materials, high performance and competitive price are what every customer wants, and that's also what we can offer you. Of course, also essential is our perfect after- sales service. If you are interested in our products, you can consult us now, we will reply to you in time!

POWSIL-59110 is a super soft textile softener. It contains a revolutionary & new generation of silicone molecule that delivers a voluminous and silky hand feel. Furthermore it provides sio2 hydrophilic nature to most types of softener in textile fibers or fabrics at a reduced use level than other silicone softeners. It is very stable in an ordinary textile finish process without causing oil- spots on fabric. Technical Data Physical Form Liquid state Appearance Transparent, light yellowish Solid Contents (wt%) ~50 Viscosity (25°C, cps) ＜1,500 pH (25°C) (1% in water) 4.0-6.0 Diluents Water Ionic Slightly cationic Application POWSIL-59110 silicone fabric softener can be used as received or pre-diluted with water before applying. It is a MUST to stir the contents of POWSIL-59110 so that it is well homogenized in the drum before use. The optimum treatments such as dosages are dependent on the required softness of the fabric and yarn after finishing. Typical applications are recommended as follows: Pad-dry-cure process: Dosage: 5~10g/l for light fabric or 10~20g/l for heavy fabric pH: 5.0 ~ 7.0 Temp. : Ambient temperature Dry/Cure: 120 ~ 170 ºC for 1~3 min Exhaustion process: Dosage: 0.5~ 1.0% on the weight of fabric Liquor ratio: 1/10 ~ 1/20 pH: 5.0 ~ 7.0 Temp. : Ambient temperature Time: 20 ~ 30 min Drying: 100 ~ 130 ºC for 3~5 min Garment washing process: Dosage: 0.5~1.0% on the weight of garment Duration: 20 ~ 30 min Drying: 100 ~ 130 ºC for 3~5 min Guides of Stripping: POWSIL-59110 can be stripped off fabric. The stripping formulation is as follows: NaOH: 5 g/l LABS(30%) : 2-5% Add water and NaOH onto fabric tank and then heat to 100°C for 60 min. Then rinse fabric with acidic water and then pure water. Packing and Storage The product for better silicone China fabric is sensitive to temperature below -10°C and above 60°C. When it is separated, stir the contents well homogenized or add 2-5% of 20% acetic acid aqueous solution and stir for 30 min. If the product is frozen, thaw it at warm condition and stir after thawed. The container should be tightly sealed when not in use. To ensure the product quality is maintained, the product should not be exposed to too hot or too cold condition. It is stable for 12 months when properly stored at 25°C. It is a MUST to stir the contents of POWSIL-59110 so that it is well homogenized in the drum before use. We have types of Silicone Fluid for sale , if you have needs, contact us.

Minimum Order: 1 bags