Plastic Sheets

High-density polyethylene (HDPE) is a thermoplastic polymer made from petroleum. As one of the most versatile plastic materials, HDPE plastic is widely used in a variety of applications, including cutting boards, and outrigger pad, ground mat, synthetic ice rink. HDPE plastic is known for its excellent tensile strength and large strength-to-density ratio, with high impact resistance and melting point. HDPE Sheet Applications: 1.Conveyor Systems 2.Hopper Liners 3.Dock Bumpers 4.Wear Pads, Wear Strips & Bearings 5.Grain & Fertilizer Handling 6.Mining & Mineral Processing Equipment 7.Dump Truck & Trailer Liners 8.Airboat Bottoms Advantage: 1.hdpe sheet Wear resistance is 6-7 times of ordinary carbon steel; 2. impact strength was 4 to 5 times of the ABS; 3. Self-lubricating properties superior; 4. Strong corrosion resistance, high chemical technical; 5. non-stick phase is not easy to attach the product surface and other materials; 6. the impact energy absorption is strong; 7. health non-toxic, low temperature resistance.

Ultra High Molecular Weight Polyethylene (UHMWPE) is a thermoplastic engineering plastic that combines the superior properties of all plastics. Mechanical properties are higher than high-density polyethylene, with outstanding wear resistance, impact resistance, low temperature wear resistance, stress crack resistance, high temperature creep resistance, low friction coefficient, self-lubricating, excellent chemical resistance Excellent performance such as fatigue resistance, noise damping, and nuclear radiation resistance. Can replace carbon steel, stainless steel, bronze and other materials used in textile, paper, food machinery, transportation, medical, coal, chemical and other sectors. UHMWPE Sheets Advantages : Highest abrasion resistance of any polymer, 6 times more wear resistant than steel Anti-Weather & Anti-Aging Self-lubricating, Very low coefficient of friction Excellent chemical & corrosion resistant Superior impact resistant, Noise- absorption, Vibration-absorption Temperature range: -2600C ~ +800C; Very high resistance to cold,doesn't become fragile even under -1800C High tensile Strength Non-Toxic and smell UV resistance Flame Retardant; Relatively low in water absorption Excellent electrical properties Good performance in resisting environment stress crack, 200 times of ordinary PE No adhesion

PET sheet (polyethylene terephthalate) is a common thermoplastic that provides high dimensional stability, excellent mechanical strength and good resistance to creep. It offers resistance to chemicals, provides very low moisture absorption and is a good electrical insulator. PET sheet also performs well in wear applications and has a tough, hard surface that can be easily machined and polished. • Outstanding thermoforming characteristics, particularly in deep draw applications • Good impact resistance • Less brittle than acrylic • Resistant to common cleaners used on point of purchase displays • Allows for rigid thermoforming cycle times • Impact strength greater than acrylic and approaches polycarbonate • 86% light transparency compared to 87% for polycarbonate and 92% for acrylic • Die cuts/punches easily • Low forming temperature • Printable • Chemical resistant • Self-extinguishing

PRODUCT DESCRIPTION Mason 3/16'' Thick 48x96'' Crystal Clear Cast Perspex Acrylic Sheets Description Plexiglass sheet is a type of acrylic and you will often find the two words (plexi glass and acrylic sheet) to be interchangable.The scientific name for plexiglass is Poly(methyl methacrylate) (PMMA) and it is most often used as a shatter-resistent or lightweight alternative for glass. 48x96'' Clear Acrylic Sheet 0 Applications Skylights Windo , w glazing Retail displays Signs Optical displays Picture framing 48x96'' Clear Acrylic Sheet 1 MASON CLEAR CAST ACRYLICPARAMETER Item Test Result Item Test Result Transmittance% 94 Tensile Strain at Break, Mpa 5 Rockwell Hardness(M) 97 Modulus of elasticity in tension, Mpa 3.03 Vicat Softening Temperature(1.8MPA) 101 Rockwell Hardness(R) 124 Coefficient of Thermal Expansion ℃-1 7.0*10-5 Resistance to crazing in solvent No crazing Dimensional Stability(shrinkage) % 1.9 Charpy Non-notch Impact Strength KJ/M2 21.9(C) Tensile strength, Mpa 74.7 MASON ACRYLIC SPECIFICATION (The specification is 3mm plate, size will decreases with the increase of thickness) Code Size with rubber edge Size after cut edge Q 1250*1850mm 1210*1820mm L0 1250*2450mm(Include Frosted) 1210*2420mm(Include Frosted) L1 1270*2490mm 1220*2440mm L2 1310*2530mm 1270*2490mm L3 1350*2570mm 1310*2530mm N 1550*3050mm 1510*3020mm M 2050*3050mm(Include Frosted) 2010*3010mm(Include Frosted)

BPM Smooth Geomembrane is manufactured by the high quality Polyethylene virgin raw material,adding carbon black,antioxidant,anti-aging and UV resistance component. BPMhave the firstclass automatic blowing film production line and flat die production line.And geomembrane is an effective waterproofing barrier in project.BPM have smooth, textured and composite Geomebrane withblack ,white,green and blue color etc.

Minimum Order: 3 bushels

Description: the polyurethane elastomeric is a new material of polymer synthetic between rubber and plastic. It has both high strength of plastic and high elasticity of rubber. Its characteristics are: 1, a wide range of hardness. It still has rubber elongation and resilience at high hardness. The polyurethane elastomeric has a hardness range of Shore A10-D80. 2. high strength. At rubber hardness, the tensile strength, tear strength and load carrying capacity are much higher than general rubber material. At high hardness, its impact strength and flexural strength are much higher than plastic material. 3, wear-resistant. Its wear resistance is very outstanding, generally in the range of 0.01-0.10cm3/1.61km, about 3-5 times than rubber material. 4, oil resistant. The polyurethane elastomeric is a highly polar polymer compound which has low affinity with non-polar mineral oil and is hardly eroded in fuel oil and mechanical oil. 5, good resistance to oxygen and ozone. 6, excellent vibration absorption performance, can do damping and buffering. In the mold manufacturing industry, it replaces rubber and springs.7, has good low temperature performance. 8, radiation resistance. Polyurethane is highly resistant to high energy radiation and has satisfactory performance at 10-10 deg radiation dose. 9, with good machining performance. The polyurethane rod, pu rod are made by full sets mould cast with high quality polyester or polyether. It is very good performance of chemic erode resistant, impregnant resistant, ozone resistant, radiation resistant, aging resistant, hydrolyze resistant, and high tensile strength, tear resistant, high impact resistant, high bend strength and low compression set etc. The abrasion resistant is 5 multiple more than pure natural rubber, and the oil resistant is 3-5 multiple more than NBR rubber, and have high elasticity 65% with prominent compression resistant at high temperature. Wider revise hardness range of 75- 95shore A, very good viscidity with metal material, it is a new macromolecule material with fast evolutive now. Apply to military, mine, oil field, chemical, printing, punch, paper making, shoe making, spin, auto industrial etc. Specifications: materia , l: virgin CPU or TPU quality: polyether or polyester color: clear yellow, red, black, brown, blue, green etc. surface: smooth tensile strength: 25-50Mpa elasticity impact: >25% hardness: 75-95shore A elongation: 400%-600% density: 1.15-1.25g/cm3 tear strength: 35-155KN/m akron abrasion loss:<0.05cm3/1.61km compression set (22h*70°C):<10% working temperature: 120°C diameter: Ø10-300mm length: 300 or 500mm standard size: Ø10mm x 300/500mm Ø15mm x 300/500mm Ø20mm x 300/500mm Ø25mm x 300/500mm Ø30mm x 300/500mm Ø35mm x 300/500mm Ø40mm x 300/500mm Ø45mm x 300/500mm Ø50mm x 300/500mm Ø55mm x 300/500mm Ø60mm x 300/500mm Ø65mm x 300/500mm Ø70mm x 300/500mm Ø75mm x 300/500mm Ø80mm x 300/500mm Ø85mm x 300/500mm Ø90mm x 300/500mm Ø95mm x 300/500mm Ø100mm x 300/500mm Ø110mm x 300/500mm Ø120mm x 300/500mm Ø130mm x 300/500mm Ø140mm x 300/500mm Ø150mm x 300/500mm Ø160mm x 300/500mm Ø170mm x 300/500mm Ø180mm x 300/500mm Ø190mm x 300/500mm Ø200mm x 300/500mm Ø220mm x 300/500mm Ø250mm x 300/500mm Ø280mm x 300/500mm Ø300mm x 300/500mm OEM & customized size are agreed packing in pallets or crates ***when you enquiry, pls confirm the material, color, hardness, size and quantity***

Minimum Order: 200

Description: the polyurethane elastomeric is a new material of polymer synthetic between rubber and plastic. It has both high strength of plastic and high elasticity of rubber. Its characteristics are: 1, a wide range of hardness. It still has rubber elongation and resilience at high hardness. The polyurethane elastomeric has a hardness range of Shore A10-D80. 2. high strength. At rubber hardness, the tensile strength, tear strength and load carrying capacity are much higher than general rubber material. At high hardness, its impact strength and flexural strength are much higher than plastic material. 3, wear-resistant. Its wear resistance is very outstanding, generally in the range of 0.01-0.10cm3/1.61km, about 3-5 times than rubber material. 4, oil resistant. The polyurethane elastomeric is a highly polar polymer compound which has low affinity with non-polar mineral oil and is hardly eroded in fuel oil and mechanical oil. 5, good resistance to oxygen and ozone. 6, excellent vibration absorption performance, can do damping and buffering. In the mold manufacturing industry, it replaces rubber and springs.7, has good low temperature performance. 8, radiation resistance. Polyurethane is highly resistant to high energy radiation and has satisfactory performance at 10-10 deg radiation dose. 9, with good machining performance. The polyurethane sheet, pu sheet are made by mould cast or centrifuge rotor with high quality polyester or polyether material. It is very good performance of chemic erode resistant, impregnant resistant, ozone resistant, radiation resistant, aging resistant, hydrolyze resistant, and high tensile strength, tear resistant, high impact resistant, high bend strength and low compression set etc. The abrasion resistant is 5 multiple more than pure natural rubber, and the oil resistant is 3-5 multiple more than NBR rubber, and have high elasticity 65% with prominent compression resistant at high temperature. wider revise hardness range of 75-95shore A, very good viscidity with metal material, it is a new macromolecule material with fast evolutive now. Apply to military, mine, oil field, chemical, printing, punch, paper making, shoe making, spin, auto industrial etc. Specifications: materia , l: virgin CPU of polyether or polyester color: clear yellow, transparent, black, red, brown, white, blue, green etc. surface: smooth/smooth tensile strength: 25-50Mpa elasticity impact: >25% hardness: 75-95shore A elongation: 400%-600% density: 1.15-1.25g/cm3 tear strength: 35-155KN/m akron abrasion loss:<0.05cm3/1.61km compression set (22h*70°C):<10% working temperature: 120°C(maximum) thickness: 0.1-60mm width: 10-1500mm length: 500-4900mm standard size: 0.1-3.0mm x 1.00m x 50kgs 0.1-3.0mm x 1.22m x 50kgs 0.1-3.0mm x 1.37m x 50kgs 1-20mm x 0.3m x 3.0m 1-20mm x 0.6m x 3.0m 1-20mm x 0.4m x 4.0m 1-20mm x 0.5m x 4.0m 1-20mm x 0.6m x 4.0m 1-20mm x 0.8m x 4.0m 1-20mm x 1.0m x 4.0m 1-20mm x 1.2m x 4.0m 1-20mm x 1.5m x 4.9m 10-60mm x 0.3m x 0.3m 10-60mm x 0.4m x 0.4m 10-60mm x 0.5m x 0.5m 10-60mm x 0.6m x 0.6m 10-60mm x 0.5m x 1.0m 10-60mm x 0.6m x 1.2m 10-60mm x 1.0m x 1.0m 10-60mm x 1.0m x 2.0m OEM & customized size are agreed packing in cartons, pallets or crates ***when you enquiry, pls confirm the material, color, hardness, size and quantity***

Minimum Order: 200

Silicone Sponge Sheet, Silicone Foam Sheet Description: the silicone sponge sheet, silicone foam sheet are made by special improved continuous plain press vulcanizer with high quality closed cell or open cell silicone sponge material and inimitable sponge technique, it is good performance of high temperature resistant, aging resistant, ozone resistant, heat insulation, fuel oil resistance, lubes resistance, no smell and wear well, high compressibility and low compression set over a wide working temperature range, good acoustic and thermal insulation properties. Apply to -60°C - +220°C protect and heat insulation for long term continuous use, -70°C - +260°C for intermittent use on all kinds of ironing table and special gasket application etc. Specifications for close cell silicone sponge sheet: material: virgin silicone sponge, silicone foam cell: closed cell color: dark red, white, grey, black, beige, brown, blue etc. surface: double impression fabric tensile strength: 100-200PSI hardness: 10, 15, 20, 25, 30, 35, 40+/-5shore A (currently 20-25shore A) elongation: 100% density: 0.5-1.0g/cm3 working temperature: -60°C - +220°C(moment 260°C) thickness: 1.5-50mm width: 0.1-1.5m(maximum 1.5m@more than 5mm thickness) length: 0.1-10m standard size: 1.5-50mm x 1.0m x 10m 1.5-50mm x 1.2m x 10m 5.0-50mm x 1.5m x 10m OEM & customized size are agreed packing in cartons, rolls, pallets or crates backing adhesive is agreed of Chinese general glue or USA 3M glue perforated silicone sponge sheet is 6, 8, 10mm x 0.9m x 1.8m, red, beige, white color custom size for silicone sponge extrusion, silicone sponge profile, silicone sponge stripe ***when you enquiry, pls confirm the color, hardness, surface, size and quantity***

Minimum Order: 1 bags

Silicone Sheet, Silicone Membrane, Silicone Rolls Description: the silicone sheet, silicone membrane, silicone roll are made with high quality silicone material on special rotocure vulcanizer or plain press vulcanizer according to the different request from the buyers. General silicone sheet produce on 4rollers rotocure vulcanizer, super width silicone sheet produce on 2rollers rotocure vulcanizer, super thin silicone sheet produce on special oven road vulcanizer, super thick silicone sheet produce on plain press vulcanizer. We depend on the advanced manage, innovative technique and strict quality control with excellent silicone material and vulcanizer machine, ravel out the problem of lower smooth surface and high thickness tolerance of rotocure vulcanizer machine, and also ravel out the problem of restricted width, length and visible joint on press vulcanizing machine. It is triumphantly without joint and with infinite length under the above mentioned excellence. We have the super-wide drum-type vulcanizing press with 4000mm width and high quality products maximum width 3800mm seamless without joint. High quality silicone rubber with good performance of anti-aging, ozone resistance, heat-resistant, electric insulation, oil resistance, solvent resistance, corrosion resistant, nonpoisonous and tasteless, pollution-free. Working in air, water, oil and other medium at the temperature of -60°C - +260°C(moment maximum 300°C) with the high stability, reliability and surface inactive without sticky. Apply to punch all kinds of rubber seal, rubber gasket or special for wooden PVC vacuum press laminator, wooden door vacuum press laminator, safety glass vacuum laminating bags, solar vacuum press laminator, hot press laminator, card press laminator and others application etc. Specifications: materia , l: 100% virgin HTV silicone material grade: industrial grade, food grade, medical grade, FDA grade with postcured quality: high tear resistant, middle tear resistant, general tear resistant color: translucent, dark red, black, milk white, grey, blue etc. surface: smooth/smooth, smooth/impression fabric, smooth/sand or double impression fabric reinforce: insert 1 PLY fiberglass fabric, aramid fabric or wire mesh SS201, SS304, SS316 tensile strength: 7.5-12.0Mpa hardness: 10, 20, 30, 40, 50, 60, 70, 80+/-5shore A elongation: 350%-720% density: 1.25-1.50g/cm3 tear strength: 26-42N/mm working temperature: -60°C - +260°C(moment 300°C) thickness: 0.1-50mm width: 0.1-3.6m length: 1-50m standard size: 0.1-1.0mm x 0.5m x 25/50m 0.5-10.0mm x 0.5-1.2m x 10/20m 1.0-30.0mm x 0.5/1.0/1.2/1.5m x 10/20m 1.0-8.0mm x 1.5-3.8m x 10/20/30m OEM & customized size are agreed packing in rolls, pallets or crate Special Silicone Membrane: silicone membrane, light grey, 9.8Mpa, 40shore A, 750%, 42N/mm Germany silicone for "+" and "-" press on wooden PVC vacuum press laminator silicone membrane, translucent, 7.5Mpa, 50shore A, 400%, 26N/mm Chinese silicone for "-" press only on wooden PVC vacuum press laminator silicone membrane, dark grey, 12.0Mpa, 60-70shore A, 350%, 45N/mm, Germany silicone for photovoltaic module on solar vacuum laminator silicone membrane, sky blue, 7.5Mpa, 50shore A, 350%, 26N/mm, Chinese silicone for safety glass on glass vacuum bag and laminator silicone membrane, dark blue, 8.0Mpa, 57shore A, 450%, 30N/mm, Chinese silicone for safety glass on glass vacuum bag and laminator Special supply FDA grade silicone sheet with postcure and antistatic silicone sheet with fire-resistant, black color, smooth surface ***When you enquiry, pls confirm the application, color, hardness, size and quantity***

Minimum Order: 1 bags