Pumps

Horizontal single stage end suction fiberglass centrifugal pump The flow components are made of polyvinyl butyral and modified phenolic glass fiber materials by high temperature molding. The material has the features of Corrosion resistance, high temperature resistance, light weight, high specific strength, no deformation etc. WB2 external mounted mechanical seal The connection between the pump and motor: Close coupling or Shaft coupling Fiberglass centrifugal pump is mainly used in petrochemical, smelting, dye, printing and dyeing, pesticide, pharmaceutical, rare earth, leather and other industries. It is used for conveying various non-oxidizing acids (hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, butyric acid). The acids are without solid particles, not easy to crystallize and the temperature is not higher than 100 degrees Celsius.

Minimum Order: 1 bags

PVDF plastic Chemical pump PF polyvinylidene fluoride (PVDF) chemical pump is a single suction single stage direct-coupled centrifugal pump. The pump body, pump cover, impeller etc. parts which contact with conveyed are made of polyvinylidene fluoride resin molding processing. Polyvinylidene fluoride plastics(PVDF) have high mechanical strength and good corrosion resistance, which is one of the engineering plastics widely used in the world. PF type chemical pump can transport -50 degree Celsius to 110 degree Celsius temperature under the condition of various concentration of sulfuric acid, hydrochloric acid, acetic acid, phosphoric acid, chromic acid, oxalic acid, hydrofluoric acid and alkali, chemical medium, such as organic solvents, oxidant is chemical, alkali, chemical fertilizer, dyestuff, reagent, pesticide, pharmaceutical, electroplating, environmental protection and other industrial departments as the energy-saving pumps. The conveyed corrosive medium is without particles. PTFE external corrosion resistant mechanical seal Connection for the pump and motor: Close couple, Pump material: PVDF

Minimum Order: 1 bags

Non-seal automatic self-priming vertical pump. Non-seal automatic self-priming vertical pump is for the new pump improved by our company. It is suitable for conveying liquid containing solid particles, oily sewage and all kinds of liquids which are not easy to produce foam. The pump can be made of Stainless steel, reinforced polypropylene, carbon steel, cast iron etc. materials. It is widely used in electronics, electric power, chemical, metallurgy, medicine, food, electroplating, environmental protection, fire protection, government, water purification, national defense military industry, textile printing and dyeing, mining and mineral processing and other industries. Liquids dynamic seal, no friction, no wear, no leakage Electric air control valve is equipped onto pump inlet and draw the air of pump inlet pipeline for self-priming. High efficiency, small volume, east installation and use. Excellent automatic control function Pump type: Type 1 is rectangular, type 2 is conical, type 3 is explosion-proof, type 4 is outdoor, type 5 is pushcart moving type. Material code: T: cast iron, G: Carbon steel, BXG: stainless steel, PP plastic: PP

Minimum Order: 1 bags

CYZ-A Series self priming centrifugal oil pump CYZ-A self priming centrifugal oil pump has the advantages such as simple structure and convenient operation and steady running and large discharge capacity and high efficiency and low noise and long life etc. The pump has the strong self priming performance and suction pipeline need not install foot valve. It is widely used to transport gasoline,kerosene,diesel oil, oil for aviatin in oil warehouse,oil station,oil tanker,dock,tank truck,airdrome etc. It can also be used in chemical industry,pharmaceutics,brewage,electroplate,printi , ng and dyeing,papermaking,electric power,mine etc. Medium temperature range:-20 celsius degree to 80 celsius degree, viscidity≤100centipoise,Particles consistency can reach 30%. Pump body: cast iron, bronze impeller, Explosion-proof motor Suction height: 4-5meters

Minimum Order: 1 bags

ZX Self priming pump is used to pump clear water, sea water, chemical liquid with acid or alkalinity and slurry with general paste. According to the pumped liquids, the pump can be made of cast iron (HT200), stainless steel (SUS304, SUS316, SUS316L) etc. The driving motor can be for standard motor or Ex-proof motor. ZX Self priming pump has strong self-priming performance. Suction height is for 4 to 5meters. Bottom valve does not need to be installed onto the pipeline. When some liquids are stored into pump body, ZX Self priming pump can start to work. It simplifies the pipeline system and improves the working condition. Advantages Compact structure, easy operation, smooth operation, easy maintenance, high efficiency, long life, strong self-priming performance. Application: ZX Self priming pump is equipped with sprayer and widely used as sprayer machine for farms, plant nurseries, orchards and tea gardens. Self-priming centrifugal pump is suitable for urban environmental protection, construction, fire protection, chemical, pharmaceutical, printing and dyeing, brewing, electric power, electroplating, papermaking, equipment cooling, etc. Flow rate:3-600m3/h Head:12-80m Motor power:0.75KW-132kw Caliber:25-300mm , Suction height:4-5meters

Minimum Order: 1 bags

1. Summarize ZBF Series is the joint product which is designed in line with the TB/T7742-95 "small magnetic drive centrifugal pump" standards by the National Magnetic Pump Design Optimization. It is self-priming plastic magnetic pump which has outer mixed plastic structures, with combined of foreign advanced technology. The pump adopts enhanced polypropylene as the main material, self-priming time is short, long life, are the pump for automated remote control and mobile conveyor strong corrosive liquids without leaking. 2. Usage Can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, defense, scientific research institutions, metallurgy, dyes and other units pumping acid, lye, oils, rare and precious fluid, venom, volatile liquid, as well as the circulating water equipment, filtration machine, in particular, transporting the easily missed , flammable, explosive medium. 3. Characteristic It has the merit of a self-priming, without at the end of irrigation valves and primers, self-priming height of 4 meters. Magnetic Pump compact structure, beautiful appearance, small size, low noise and reliable operation, use the convenient repair. Temperature: -20°C-80°C. flux: :5-15m3/h; outlet pressure: 8- 32m; rotate speed: 2900r/min

Minimum Order: 1 bags

Chemical Pump 1、Chemical pump (stainless steel material) is widely used in petroleum, chemical, metallurgy, synthetic fiber, pharmaceutical, food, synthetic fiber and other departments to transport alkaline corrosive medium 2、Chemical pump (fluoroplastic material) is used to transport any acidic, alkaline corrosive medium 3、Chemical pump (cast iron material) is used for water supply and drainage in industry and city. It can also be used for irrigation and drainage in farmland and orchard. It is used for transporting clear water or other liquids with similar physical and chemical properties. Chemical pumps are classified according to the conveying medium 1、Water pump: including clear water pump, boiler feed pump, condensate pump and hot water pump 2、Corrosion resistant pump: including stainless steel pump, high silicon cast iron pump, ceramic acid resistant pump, impermeable graphite pump, hard rubber lined pump, rigid PVC pump, canned pump, diaphragm pump, titanium pump, etc. 3、Impurity pump: including slurry pump, sand pump, sewage pump, pulverized coal pump, ash pump, etc. 4、Oil pump: cold oil pump, hot oil pump, submersible pump, oil slurry pump, liquid hydrocarbon pump, etc. Classification of chemical pumps according to their uses 1、Chemical pump: including feed pump, reflux pump, circulating pump, flushing pump, sewage pump, make-up pump, output pump, etc. 2、Chemical pump: including boiler pump, cooling tower pump, fire pump, water source deep well pump, etc. 3、Chemical pump: including lubricating oil pump, seal oil pump, hydraulic transmission pump, etc. 4、Chemical pump: oil pipeline pump, truck pump, etc.

Desulfurization Pump Desulfurization pump is a kind of pump that can adapt to various working conditions, such as conveying acid, alkaline clear liquid or slurry; All kinds of corrosive pulp in smelting industry; All kinds of dilute acid in sulfuric acid industry; All kinds of sewage in environmental protection industry. The pump is not only corrosion-resistant and wear-resistant, the use of a very wide range.It has the following characteristics: 1、Desulfurization pump has strong wear resistance: all flow passage parts are made of steel lined ultra high molecular weight polyethylene (UHMW-PE). The wear resistance of UHMW-PE ranks first among plastics, which is 4 times higher than nylon 66 (PA66) and polytetrafluoroethylene (PTFE), and 7-10 times higher than carbon steel and stainless steel. 2、Desulfurization pump has strong impact resistance: the impact strength of UHMWPE ranks first among general engineering plastics, which is 5 times of that of (acrylonitrile / butadiene / styrene) copolymer (ABS), and can maintain stability at minus 196 ℃, which is a characteristic that no other plastics have. 3、Excellent corrosion resistance of desulfurization pump: the pump can resist all kinds of corrosive media (acid, alkali, salt) and organic solvents within a certain temperature and concentration range, and can be immersed in 80 kinds of organic solvents at 20 ℃ and 90 ℃ for 30 days. There is no abnormal appearance, and other physical properties are almost unchanged 4、No noise in desulfurization pump: the impact energy absorption of UHMWPE is the highest value in plastic, and the sound attenuation is good, so that the noise generated by liquid flow is minimized in the process of transportation. 5、Desulfurization pump Safe and reliable, no toxin decomposition: the pump used ultra high molecular weight polyethylene (UHMW-PE) chemical properties are extremely stable, so it is also suitable for use in the food industry. 6、Low friction coefficient of desulfurization pump: the internal friction system of the pump is only 0.07-0.11, so it has self lubrication. Under the condition of water lubrication, the dynamic friction coefficient is half lower than that of PA66 and POM. When working in the form of sliding or rotating, the lubricity is better than that of steel and brass with lubricating oil. 7、Good viscosity resistance of desulfurization pump: ultra high molecular weight polyethylene (UHMW-PE) has excellent viscosity resistance, and its adhesion resistance is equivalent to that of PTFE, so it is also outstanding in conveying some media with high viscosity. 8、Desulfurization pump can transport strong acid and other liquids, suitable for medium: sulfuric acid with concentration less than 80%, nitric acid with concentration less than 50%, hydrochloric acid with various concentrations, liquid alkali, both clear liquid and slurry.

Gravel Pump Gravel pump is mainly used for continuous transportation of strong abrasive materials which can not be transported by general slurry pump due to too large particles. It is suitable for dredging, sand absorption, river dredging, mining and metal smelting slag transportation. Structural features of gravel pump 1、This series of gravel pumps are mainly horizontal centrifugal pumps with single casing structure. Special clamp is used to clamp the pump body and cover. The outlet direction of the pump can be at any position of 360 degrees, so it is easy to install and use. 2、The bearing assembly of gravel pump adopts cylindrical structure, which is easy to adjust the clearance between impeller and pump body, and can be removed as a whole during maintenance. The bearings are lubricated with grease. 3、The shaft seal of sand gravel pump includes packing seal, impeller seal and mechanical seal. 4、The gravel pump has wide flow channel, good cavitation performance, high efficiency and wear resistance. 5、The main driving modes of gravel pump are V-belt drive, elastic coupling drive, gear reducer drive, hydraulic coupling drive, variable frequency drive, silicon controlled speed regulation, etc. 6、The flow passage parts of gravel pump are made of wear-resistant alloy cast iron with high hardness. 7、Gravel pump uses a variety of speed and a variety of variants, so that the pump runs in the best condition. It has long service life, high operation efficiency and can meet many kinds of harsh transportation conditions.

Slurry Pump Slurry pump can also be called metal pump, wear-resistant pump, industrial pump, accident slurry pump, ash filling pump and filter pump.The name of slurry pump is different. We can know that slurry pump is widely used in industry, mining and other large industries. Slurry pump can be widely used in mining, power, metallurgy, coal, environmental protection and other industries to transport slurry containing abrasive solid particles. For example, transportation of mineral slurry in metallurgical concentrator, hydraulic ash removal in thermal power plant, transportation of coal slurry and dense medium in coal preparation plant, dredging of river channel, river dredging, etc. In the chemical industry, it can also transport some corrosive slurry containing crystal.   First of all, about 80% of the applications in mineral processing plants are used in mineral processing plants in the mining industry. Due to the poor working condition of ore primary separation, the service life of slurry pump in this section is generally low. Of course, different ores have different abrasivity. If the relative abrasiveness of the concentrate conveying section is reduced, the overall service life of the pump will be longer. Therefore, when the general users often ask about the service life of the products of the suppliers in the procurement process, strictly speaking, any manufacturer will not promise an accurate service life cycle for the users without any basis, because the service life of the flow passage parts (wear-resistant and corrosion-resistant parts) depends on many different factors, The diversity and complexity of working conditions lead to different service life of materials with the same quality.   In thermal power plants, due to the use of a large number of coal-fired power generation, the slag or ash after coal combustion needs to be removed. The slurry pump is used to remove the ash. After mixing a certain amount of water, the slag is transported to the place where the ash is stacked by the slurry pump. Therefore, sometimes the slurry pump also becomes the ash pump in the power plant.   In the coal washing industry, due to different working conditions, large coal lump and coal gangue are easy to block, so the design requirements for slurry pump are very high   In the field of sea water sand selection, slurry pump application has gradually been recognized by customers. But in the sea water, sand in the river, slurry pump is more easily called sand pump, dredge pump. Although the method is different, it can be called slurry pump generally from the aspect of structure characteristics and pump performance principle. Therefore, in this sea water sand selection, we often call sand pump, in the river dredging is used to be called dredge pump. Although the application of slurry pump is wide, it is very important to apply it correctly. Because of the limitation of its name, some people who are not in this industry misunderstand it. In fact, mud pump, impurity pump, dredge pump, silt pump, etc. are all used in the application scope of slurry pump. In the application of slurry pump, it is very important to pay attention to the reasonable design, correct calculation and proper selection.

Wastewater immersible pump YW Sewage immersible pump is equipped with the impeller of Single flow passage or double flow passage and reasonable volute case and widely used for discharging wastewater with solid particle or long fiber etc. impurities. Motor is above the liquid and pump is submerged into liquid for working. The immersible depth is up 3meters. The pump has the advantages of energy saving, anti-winding, no blocking, automatic installation and automatic control etc. Single pipe or double pipe, supporting part: disc plate or square plate installation YW sewage pump is suitable for chemical, petroleum, pharmaceutical, mining, papermaking industry, cement plant, steel plant, power plant, coal processing industry, as well as urban sewage treatment plant drainage system, municipal engineering, construction site and other industries to convey wastewater or sewage with particles or fiber etc. impurities, also used for pumping clean water and corrosive medium.

Minimum Order: 1 bags

FYS Corrosion resistant submerged pump is the developed single stage single suction long shaft submerged pump with vertical structure. The flow parts for FYS corrosion resistant submerged pump is made of fluorine plastic alloy and the lower protection sleeve is made of silicon carbide with high quality. FYS corrosion resistant submerged pump is suitable to transport corrosive liquids without solid particles and the temperature of liquids is at 0 to 120 degree Celsius. FYS corrosion resistant submersible pump has the good corrosion resistance and abrasion resistance. The pump body and impeller are partly immersed into the liquid. So the pump occupies a small area and the shaft seal has no leakage. The liquid level must be higher than 180mm above the central line of the impeller. The pump should be started according to the direction indicated and can not be reversed. 50FYS-25 50 means pump inlet diameter(mm) FY means corrosion resistance submerged pump S means the pump material is for fluorine plastic alloy 25 means Head Performance range: Flow rate:2 to 460m3/h Head:3-60m3/h Pump material: fluorine plastic alloy

Minimum Order: 1 bags

Screw pump is a new type of machinery for the liquid transfer. It boasts such advantages as simple structure, safe and reliable operation, easy maintenance, continuous and uniform liquid discharge and stable pressure. The metal parts contacting materials of our underflow pump all adopt top-grade stainless acid- proof steel and the shaft material is 2Cr13. The bush adopts nontoxic rubber with no peculiar smell. Its working temperature can reach up to 100 degree celsius. It can be used for the transfer of corrosive media like foodstuff slurry, solution or suspension containing solid grains or rubber blocks with a viscosity of 10000Pa.S. It is widely applied in such industrial sectors as food, metallurgy, construction, pharmacy and chemical industry etc. Screw pump is a single-screw transfer pump. Its main working parts include the screw of eccentric helicoid(called rotor) and the screw bush with a double-line helicoid on its inner surface(called stator). Its working principle goes like this: when the electric motor drives the pump shaft t rotate, the screw rotates around its own axes on one hand and rolls along the inner surface of the bush on the other, thus forming a seal cavity in the pump. When the screw rotates a cycle, the liquids in the seal cavity will advance a screw pitch forward. With the continuous drive of the screw, the liquids will press from a seal cavity to another cavity in a spiral manner until it is pressed out of the pump body finally.

Minimum Order: 1 bags

Fluoroplastic corrosive resistant self priming pump Pump body: metal lined with fluoroplastic Pump cover, impeller, etc., are made of metal inserts coated with fluorinated plastic sintering and pressing Shaft seal: External bellows mechanical seal and static ring is made of 99.9% alumina ceramic (or silicon nitride), and dynamic ring is made of PTFE filling material, Excellent corrosion resistance, wear resistance and good sealing The inlet and outlet of the pump are reinforced with cast steel body to enhance the pressure resistance of the pump All the flow parts are made of fluorine plastic and are acid & alkali resistant and corrosion resistant. The self-priming pump has wear- resistance, high temperature resistance, no aging, high mechanical strength and long life. The pump has Self-priming function, and it can pump liquid below the installation position of the pump. Suction height: 2 to 4 meters. Wide application: The corrosive liquid in the underground tank is pumped to the target site, the acid and alkali in the acid and alkali tank without outlet at the bottom is pumped to the target site, or used for circulation between multiple acid tanks, or used for acid discharge, etc.

Minimum Order: 1 bags