Pumps

Stainless steel Self priming magnetic coupled pump ZCQ self-priming magnetic pump has characteristics of no leakage, corrosion resistance as the stainless-steel magnetic pump. As the Self-priming pump, it can suck/ inhale the liquids without bottom valve. Suction height is for 4 meters. Application Stainless steel self-priming magnetic pump can be widely used in petroleum, chemical industry, pharmacy, electroplating, printing, and dyeing, food, scientific research units. Pumped liquids Stainless steel magnetic pump is suitable for pumping acid, alkali, oil and precious liquid, venom, volatile liquid, and as the complete set of circulating water equipment. It is especially for easy to leak, inflammable, explosive liquid pumping.

Minimum Order: 1 bags

Polypropylene PP magnetic pump CQF reinforced polypropylene magnetic pump is made of FRPP polypropylene material by injection molding. It can resist most of the organic and inorganic acid, alkali and salt solutions. It is suitable for outdoor exposure in the atmosphere with good corrosion and cracking resistance. CQF Magnetic pump has compact structure, beautiful appearance, small volume, low noise, reliable operation, easy to use and maintenance. It can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, national defense, scientific research institutions, metallurgy, dyes and other units for pumping acid, alkali, oil rare precious liquid, toxic, volatile liquid, as well as circulating water equipment, filter supporting. It is especially used to pump the liquid which is easy to leak, flammable, explosive. This pump is a more ideal equipment when it is equipped with the explosion-proof motor.(Pump material: reinforced polypropylene) Pump body, pump cover, impeller：Engineering plastics PP(FRPP) Pump shaft: Ceramic or silicon nitride Static ring, dynamic ring: Ceramic or silicon nitride, filled with PTFE Pump inlet and outlet can be flange or pipe connection.

Minimum Order: 1 bags

CQ-P stainless steel magnetic pump CQ type stainless steel magnetic pump (magnetic pump for short) is a new product that applies the working principle of permanent magnet coupling to centrifugal pump, with reasonable design, advanced technology, full sealing, no leakage, corrosion resistance and other characteristics, and its performance has reached the advanced level of similar products abroad. Features: The magnetic pump replaces the dynamic seal with the static seal, so that the pumped fluids are in a completely sealed state, which completely solves the problems of mechanical seal leakage. Stainless steel Magnetic pump is made of stainless-steel material so it has good corrosion resistance, and it can prevent the pumped medium from being polluted. Application: CQ stainless steel magnetic pump has compact structure, beautiful appearance, small volume, low noise, reliable operation, easy to use and maintenance. It can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, film and photographic printing, scientific research institutions, national defense industry and other units to pump acid, alkali, oil, rare precious liquid, toxic, volatile liquid, as well as circulating water equipment, filter supporting. It is especially used to pump the fluids which is easy to leak, flammable, explosive. Model Significance: For example: 40 cq - 20 p 40- Pump inlet diameter (mm) CQ- Magnetic drive pump 20- Working head (m) P-material is stainless steel

Minimum Order: 1 bags

Fluoroplastic liner self-priming magnetic pump ZMD fluoroplastic liner self-priming magnetic pump is our company's new generation of corrosion resistant self-priming magnetic pump. It not only has the advantages of fluorine plastic magnetic pump, but also has self-priming function. The pumps can be widely used in chemical industry, non-ferrous metal smelting, pesticide, acid and alkali production, paper making, pickling process, rare earth separation, electroplating, electronics, foils, acid and alkali discharge and other industries. The flow parts are lined with fluorine plastic, and the pump body is made of metal material, which can bear the weight of the pipeline. The pump cancels the shaft seal, use the magnetic coupling drive, no drip leakage phenomenon, to ensure safe production conditions. It is highly efficient and energy saving, safe and practical. The pump body of self-priming pump is composed of liquid storage chamber, impeller, sealing ring and other parts. Suction height is 2 to 4meters. Without the bottom valve and irrigation, self-priming height is for 4 meters, before starting the pump cavity filled with liquid, to achieve the role of self-priming to complete pumping. Flow range: 3.6m³/h-60m³/h Head range: 25m-48m Power range: 2.2KW-18.5KW Applicable medium: moderate concentration of acid, alkali, salt, organic solvents, etc Medium temperature: -20 to 100 degrees Celsius.

Minimum Order: 1 bags

CQB Stainless steel no leakage magnetic drive pump CQB type stainless steel magnetic drive pump is a new type of completely leak-free corrosion resistant pump developed by the national joint design group of magnetic pump. Its technical and economic indexes are comparable to the level of similar foreign products in the late 1980s, which is the supplement and improvement of CQ type magnetic pump. The main parts of CQB stainless steel pump adopts full stainless steel material and the pump is used to convey the organic acid, organic compound, alkali, neutral solution etc. and has good corrosion resistance, double helix carbon graphite bearing and the adaptation of the hard alloy bushing, strong wear resistance to ensure the service life of pump. It is an optimal pump to convey corrosive mediums without leakage. The ideal pump for conveying corrosive media without leakage can directly replace IH chemical process pump. CQB type magnetic drive pump applicable range CQB series magnetic pumps are widely used in petroleum, chemical, metallurgy, pharmaceutical, electroplating, environmental protection and other industries. CQB Stainless steel magnetic drive pump can transport flammable, explosive, highly toxic, valuable liquid below 100℃.Adopt magnetic drive principle to convey corrosive medium and no leakage. Flow: 3.2-100m3/h head: 20-80m power: 0.75-75kw

Minimum Order: 1 bags

Fully open type impeller centrifugal pulp pump is a new generation of pulp pump developed on the basis of digestion and absorption of foreign advanced pump products, combined with the requirements of domestic paper making and pulping enterprises. It has the advantages of high efficiency, anti-clogging performance, no leakage during operation, easy installation and maintenance, etc. Scope of application Pulp and paper, sugar starch, industrial sewage, environmental protection projects Traffic: 30-3000 m3 / h Head: 10-100 - m Pulp concentration: not more than 6% Operating temperature: no more than 120 degrees Celsius Structural characteristics of 1. The pump is a backdoor pull out structure, so it is unnecessary to remove the pipeline during maintenance 2. The impeller adopts three-blade (or six-blade), open-type impeller, with high efficiency and no axial thrust compensation, easy maintenance and no blockage 3. The pump shaft is supported by imported bearings lubricated with oil or grease. Cylindrical roller bearings are mounted at the pump end, and two angular contact ball bearings are mounted back-to-back at the drive end. Increase the size of the shaft to ensure no vibration when the pump is operated. 4. Impeller adopts precision casting and dynamic balance test. 5. Seal: single end mechanical seal, packing seal

Minimum Order: 1 bags

Vertical fluoroplastic line pipeline pump Fluoroplastic pipeline pump is based on the international standard combined with the vertical metal pump process design. It is used for the long-term transport of high concentration of acid, alkali, strong oxidant and other corrosive chemical medium within the temperature of -20degree Celsius to 120 degree Celsius. The shell is made of metal shell lined with polyperfluoroethylene propylene (FEP) and the overcurrent parts are all made of plastic alloy (PTFE, FEP). It has the advantages of various plastic pumps, such as strong corrosion resistance, good wear resistance, high mechanical strength, no aging and no toxin and no decomposition. The inlet and outlet of the pump are reinforced with cast steel or cast-iron body to enhance the pressure resistance of the pump. The pump has the advantages of corrosion resistance, wear resistance, high temperature resistance, non-oxidation, high mechanical strength, smooth operation, advanced and reasonable structure, strict and reliable sealing performance, convenient disassembly and maintenance, long service life and so on. Vertical structure saves space and is easy to maintain.

Minimum Order: 1 bags

WRY Hot oil circulation pump WRY series hot oil /thermal oil circulation pump has been used in the carrier heating system in China, and has entered various industrial fields such as petroleum, rubber, resin, textile, printing, construction, road construction, machinery, etc.. WRY hot oil pump is mainly used to transport weakly corrosive high-temperature liquid without solid particles, and the service temperature is no higher than 350 degree Celsius. model description WRY 100-65-230 WRY: water-free cooling hot oil pump 100: pump inlet diameter 100mm 65: pump outlet diameter 65mm 230: nominal diameter of impeller 230mm basic structural form is single-stage single-suction cantilever foot support structure, the pump is axial suction, and the outlet is vertically upward at the center, which is installed on the baseplate together with the motor. The support of WRY hot oil pump adopts the structural form of double-end ball bearing support. The front end is lubricated by lubricating oil, the rear end is lubricated by lubricating grease, and there is a guide pipe in the middle to observe the sealing condition and recover the heat transfer oil at any time. WRY hot oil pump adopts natural heat dissipation structure, which changes the traditional water cooling structure, making it simple in structure, small in size, low in operating costs, good in performance and use. WRY hot oil pump: (1) The combination of packing seal and mechanical seal is adopted. The packing used for packing seal has good thermal adaptability, while the mechanical seal uses mechanical and good cemented carbide material, which improves the sealing performance under high temperature. (2) The use of the third generation polytetrafluoroethylene (PTFE) as lip seal has made a leap in sealing performance, which is 25 times higher than that of rubber, and has strong performance.

Minimum Order: 1 bags

Pump Applications: ZA,ZAO Petrochemical process centrifugal pumps are used to transport clean liquid or other liquid which has solid with low temperature or high temperature and neutral or corrosive liquids. they are specially used to transport some chemical liquids with different temperature and corrosion such as acid. Alkali, salt and other liquid with corrosive materials. The pump is applied to oil refining and petro chemical products and environment project and sea project, petrol transporting project, water supply, heating project and paper making ,sugar refining, pharmacy and so on. Pump introduction: The pump is single horizontal radial cut-Opening volute pump and Casing is supported by its feet, single radical impeller. Sucked from the shaft direction and radial discharged. It adopts front or back ring and balance hole. to carry through water power balance. The padding box of cooling or heat up pipe joint, The shaft seal is made of padding seal and you may choose single end or double end mechanical seal which have cooling ;wash or seal fluid system. The rotate direction; seen from the end of prime mover, it is clockwise. ZA petrochemical process pump is designed on the basis of API610 Pumps performance range: Caliber DN 25 to 400mm Capacity 3 to 2600m3/h, Head 4 to 250m Operating pressure Max2.5Mpa and Operating temperature 80 to 240 degree Celsius.

Minimum Order: 1 bags

IH stainless steel chemical centrifugal pump is used to transport corrosive liquids with viscosity similar to water and the liquids are without solid particles or fibers. The temperature of pumped liquid is generally for 20℃ ~ 105℃. When the pump is equipped with cooling device, the temperature of pumped fluid can be higher. The maximum working pressure of the pump is 1.6MPa. Flow range: 6.3 ~ 400 m3/h Head range: 5 ~ 125 m. According to the corrosion of pumped liquids, the flow parts of the pump can be stainless steel SS304, SS316 or SS316L etc. IH stainless steel chemical centrifugal horizontal pump is a single - stage single - suction cantilever centrifugal pump. The rated performance points and dimensions of the pump meets the international standard iso2858-1975 (E). The pump is used into mechanical industry to replace the F corrosion centrifugal pump with energy saving for the chemical process. IH chemical pump is widely used in chemical industry, metallurgy, electric power, papermaking, food, pharmaceutical, synthetic fiber and other industrial sectors to transport corrosive fluids. Pump features: 1.IH type chemical pump mainly consists of pump body ,impeller, seal ring, impeller nut, pump cover, mechanical seal, intermediate support, shaft and bracket etc. 2.rotation direction of pump: from the driving end, it rotates clockwise. 3.. Back pull out structure for easy maintenance 4. Seal: gland packing or mechanical seal (single end face or double end faces)

Minimum Order: 1 bags

CZ standard chemical process pump is suitable for chemical and petrochemical industry, oil refinery, paper mill and pulp industry, grain industry and other sectors to transport low temperature or high temperature liquid; Neutral or corrosive liquid; Clean liquid or liquid containing solid particles. CZ standard chemical process centrifugal pump can also be used to transport a variety of temperature and concentration of sulfuric acid, nitric acid, hydrochloric acid and phosphoric acid and other inorganic acid and organic acid, a variety of temperature and concentration of sodium hydroxide and sodium carbonate and other alkaline solution or various petrochemical liquids, organic compounds, and other corrosive liquids. CZ standard chemical process centrifugal pump is horizontal, single-stage, single- suction centrifugal pumps, its size and function meet DIN24256 / ISO2858 standard. CZ chemical pump function scope cover all the performance of the IH standard chemical pump, its efficiency and cavitation performance etc. are better than model IH pump. CZ Standard chemical process pump is the ideal pump for chemical and petroleum chemical industry, refinery, paper and pulp industry, and food industry, etc. Performance of CZ chemical pump: Flow (Q) 3.2-2000m3/h Head (H) 7-160m Operating temperature (t) -80-300 degrees Working pressure (P) 2.5mpa Design features of CZ pump: The pressure acting on the shaft seal is balanced by the balance hole on the impeller. Shaft seal can be used soft seal (cooling, or not cooling), also it can be used a variety of structures single, double end non - balance mechanical seal. The ball bearing is durable and its diameter size is sufficient to ensure smooth operation. The pump body of some specifications is designed as a double volute housing to balance the radial force. Bearing rack, including shaft, impeller, packing box, etc. form a combination of parts, so that the pump body in the maintenance need not be removed from the pipe (if the use of extended coupling, motor need not be removed).Flange design, using PN16, PN25 two (according to the difference in materials).

Minimum Order: 1 bags

Pump materials: Reinforced polypropylene (RPP) FP reinforced polypropylene anti-corrosive centrifugal pump uses a high-quality reinforced polypropylene (RPP) injection molding with high mechanical strength, good corrosion resistance, (the medium does not contact with the metal), with corrosion resistance, wear resistance, with high quality silicon carbide mechanical seal, without cooling water cooling, high efficiency, low price etc. Better corrosion resistance than metal pump FP reinforced polypropylene plastic centrifugal pump is used to replace stainless steel pump and fluorine alloy pump and the other non-metallic pump. Pumped fluids: FP reinforced polypropylene anticorrosion centrifugal plastic pump is widely used to transport a large number of inorganic and organic acids, alkali, salt solutions and their derivatives. The pump can operate reliably in the range of -20 to 80DegC. The model 80FPD-32 (100FPD-32) is the best matching pump for the RPP-65 (RPP-80) series water jet vacuum pump. Application: FP Series reinforced polypropylene centrifugal pump is with mechanical seal. The pump is made from CFR-PP (reinforced polypropylene) material on the advanced domestic and oversea technology. The pump has the advantages of advanced structure, light weight, small volume and long life etc and widely used to transfer the acid and alkali ad salts etc corrosive liquids in the chemical industry, foodstuff, brewage, pharmacy, electroplate, papermaking, environmental protection, water treatment etc. Performance Range: Flow: 1 to 100m3/h Head: 5 to 50m Pump material: RPP Pump caliber: 15mm-100mm Model explanation: 50FPD-30 50: Pump inlet (50mm) FP: polypropylene plastic pump D: Closed coupling 30: lift head (30m)

Minimum Order: 1 bags

Horizontal fluoroplastic acid transfer pump FSB fluoroplastic centrifugal pump is a centrifugal pump designed by our company based on the technology of fluoroplastic pump valve. The flow components are all made of fluoroplastic alloy, and the pump body is all plastic(F46), cantilever type structure, unable to withstand the gravity of the pipeline. Compared with IHF series fluoroplastic liner pump, it is light weight and labor-saving for maintenance. FSB fluorine alloy centrifugal pump adopts outside mounted PTFE bellows mechanical seal, with multiple protection, prolong the service life of the machine to seal. For conveying medium with impurity particles, without cooling water single face hard in hard (to silicon carbide, silicon carbide) mechanical seal can be adopted, so users need to consider the model selection of the solid content in the medium. FSB-L and FSB-D type centrifugal pump is with compact structure and Simple to operate and low cost. FSB-L pump and motor is connected through flexible shaft coupling. FSB-D pump and motor is close coupling. The pump housing, impeller, machine seal and so on for the two types can be used interchangeably. FSB fluoroplastic centrifugal pump is Suitable for transporting liquid in petroleum, chemical, pharmaceutical, pesticide, pickling, dyestuff, paint, smelting, papermaking, electroplating, food and other industries. The pump has strong corrosion resistance, high mechanical strength, no aging, no toxin ,no decomposition and it can transport any concentration of acid, alkali, oxidant and other corrosive media.

Minimum Order: 1 bags

Corrosion-resistant fiberglass pump fiberglass reinforced plastic pumps are centrifugal, single stage pumps, The flow parts which contact with liquids are made of polyvinyl butyral, modified phenolic glass fiber material by high temperature molding, with superior corrosion resistance, high temperature resistance, light weight, high specific strength, no deformation, etc Shaft seal: using WB2 type external F4 corrugated mechanical seal, reliable sealing, long service life. FS Fiberglass pump is mainly used in petrochemical, smelting, dyes, printing and dyeing, pesticide, pharmaceutical, rare earth, leather and other industries. It is suitable to transport various non-oxidizing acids (hydrochloric acid, dilute sulfuric acid, formic acid, acetic acid, butyric acid) and other corrosive media) without solid particles, not easy to crystallize. Liquid temperature is not higher than 100 degree celsius. Close coupled type which is more compact for the pump and motor. Flexible shaft coupling for the bigger specification.

Minimum Order: 1 bags