Security & Protection - Others

is electron-hydraulic, external hydraulic station and controller, typical rising/descend time is 3-5 seconds, in case of emergency, rising/descend time can be as low as 1.5 seconds if hydraulic accumulator added the optional EFO system. If you are interested in our hydraulic wedge barriers, please contact us as soon as possible! Specification Dimension: (Intercept width+190mm)L x 1974mmW x 300mmH(Depth) Intercept Height: 1000mm Intercept Width: 3M – 4M – 5M – 6M Depth: 300mm Top plate thickness: 25mm Rising Time: 4-6s Rated Power: 4KW for 3M & 4M, 5.5KW for 5M Operating Temperature: -40°C~+70°C (FOR LOW TEMPERATURESSEE THE HEATING RESISTANCE) Impact Tested: IWA & PAS, 7500KG / 80KMH, equal ATSM K12/M50 Impact Result: ZERO Penetration Mini Order: 1 sets Lead Time: 10 working days after confirm the payments OEM/ODM service are available   Available Items Emergency fast raise system; Emergency buttons with lock down; Accumulator systems for hydraulic operation in power failure conditions; Access and intercom systems; UPS backup for the electrical system; Interlocking systems to give air-lock type protection on sites with higher threat levels; Inductive loop systems; Traffiffiffic lights and back indications systems; Integral inset warning lights in; A3 steel cover plate with anti-slip coating; E.F.O. emergency start-up circuit (about 1.5 seconds); Equipment for manual operation; Heat-resistant; Traffic light with two lights (green-red); Loop inductive detector; Inductive loop. Our products have a wide range of applications, if you want to know more, welcome to click here! Case Studies Advantages Hydraulic wedge barriers, also known as rising bollards or rising barriers, are security barriers that are used to block vehicle access to a restricted area. Some advantages of hydraulic wedge barriers include: 1. They are effective at blocking vehicle access to a restricted area and can be raised or lowered as needed. 2. They are made from durable materials that can withstand impact from vehicles. 3. They can be used in a variety of settings, including parking lots, government buildings, and military bases. 4. They are easy to operate and can be controlled remotely or by a security guard. 5. They can be used as a standalone security measure or integrated into a larger security system. 6. They can be customized to fit the specific needs of a facility or location. 7. They are generally low maintenance and require minimal upkeep.   We look forward to working with you! Are you looking for a reliable and effective way to secure your facility or property? Look no further than hydraulic wedge barriers! These innovative security barriers are designed to block vehicle access to restricted areas, providing a strong layer of protection for your property. With their durable materials and easy operation, hydraulic wedge barriers are the perfect solution for a variety of settings, including parking lots, government buildings, and military bases. Protect your property and keep your peace of mind with hydraulic wedge barriers. Beijing ZhuoAoShiPeng Technology Co., Ltd was established in 2009, which is professional manufacturer of Hostile Vehicle Mitigation roadway safety barrier equipment, the R&D and the operation office is situated in Fengtai District of Beijing. Warmly welcome new and old customers to visit and patronize! Come and contact us!

Minimum Order: 1 bags

The emergency control tourniquet is a compact, rugged, and efficient medical device used to control severe bleeding in war and combat zones.

Minimum Order: 100

PRODUCT DESCRIPTION 10.1-Inch Screen Display Metal Detector Walk Through Gate The intelligent contraband security check gate adopts advanced electromagnetic compatibility and anti-vibration design, featuring AI intelligent analysis, strong anti-interference capability, and earthquake resistance. It is suitable for the security inspection of controlled electronic products, knives, firearms, and other dangerous items. It is widely used in prisons, courts, schools, hospitals, electronics companies, ports, transportation stations, exhibition halls, conference centers, major events, concerts, and other important venues. 10.1-Inch Screen Display Metal Detector Walk Through Gate Product Features: Multiple Zone Technology: Multiple overlapping detection zones. Interference Resistance: 12 adjustable working frequency bands, multiple devices can alarm simultaneously. Magnetic Field Segmentation Principle: 8 grid-like magnetic field distribution, independent detection, real-time calculation. UPS Backup Power: Multiple options for 6 hours/12 hours/24 hours backup power. Safety: Harmless to individuals wearing pacemakers, pregnant women, and magnetic media. Detection Capacity: Capability to detect and process over 60-150 individuals per minute. Interlocking Function: Integration with access control systems to manage alarmed individuals. Modular Design: Easy maintenance and updates. Signal Visualization: Graphical display of detection signals for clear device status monitoring. Intelligent Imaging: 29-inch screen for direct observation. Product Advantages: Smart Recognition: Automatically identifies and excludes everyday items during smartphone detection. Wide Door Panel Design: Stable, robust, durable, and non-deforming housing. Automatic Calibration: Equipped with an automatic calibration mode to adapt to the installation site and eliminate interference. Signal Visualization: Graphical display of detection signals for clear device status monitoring. USB Upgrades: Application software can be upgraded via USB or SD card. Multi-zone Alarm Function: 8 zones on each side, indicating the location of the alarmed smartphone. Modular Component Design: Convenient and quick for transportation and maintenance. Multiple devices can work side by side with a minimum distance of 80cm- 100cm. Optional thermal imaging system for temperature measurement. 10.1-Inch Screen Display Metal Detector Walk Through Gate Parameter Specification Transport Weight Approximately 65kg Power Consumption Less than 30W Operating Temperature -20℃～+55℃ Operating Humidity 98%, non-condensing Operating Frequency Adjustable based on installation environment External Power Supply AC 100V~240V 50/60Hz Operating Frequency Adjustable based on installation environment Dimensions H2210mm x W860mm x D780mm Passage Dimensions H2000mm x W700mm x D430mm 10.1-Inch Screen Display Metal Detector Walk Through Gate against the technical parameter : Fully compliant with CE, FCC, and RoHS certifications. Radiation compliance according to EN50081-1 standard. Anti-interference compliance according to EN50082-1 standard. Certified with ISO9001:2008 quality management system. Certified with ISO14001 environmental management system. Certified with OHSAS occupational health and safety management system. Strict adherence to GB15210-2003 national standard for walkthrough metal detectors. Detecting Prohibited Items 1. Firearms and Ammunition: Including handguns, rifles, shotguns, bullets, etc. 2 .Knives and Blades: Such as daggers, knives, swords, stilettos, etc. 3. Explosives and Bombs: Including bombs, explosives, fireworks, etc. 4. Offensive Weapons: Such as clubs, batons, stun guns, etc. 5. Defensive Equipment: Such as bulletproof vests, stab-proof vests, hazmat suits, etc.

Description JMY6025 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Main Characteristics • Modules integrated antenna, excellent consistency and stability • EMV2010 certification ability in RF part • 2 SAM slots, full fill payment system usage • WIFI network interface Qualifications • PCD: NXP RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A、ISO14443B、ISO15693、ISO18000-3 MODE3 • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Supported, default OFF, could be set • SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps, 230400bps • Power supply: DC 5V (±10%) • Interface: WIFI network, USB HID • Communication speed: UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps, 230400bps USB:2.0 HID class • Power consumption: Max.150mA • Operating distance: 70mm (M1 typical distance, depending on card quality) • Dimension: 100mm * 70mm * 12mm • Weight: About 30g • ISP: Supported • RoHS: By order • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY6122 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 50ohm coaxial cable are linked the antenna and module. Main Characteristics • Module split antenna, connected by 50ohm coaxial cable, flexible antenna size and layout • EMV2010 certification ability • 4 SAM slots and 512K bytes data FLASH, full fill payment system usage Qualifications • PCD model: NXP CL RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693, ISO7816 • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Termsed, default OFF, could be set • SAM slots: 4, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps • Power supply: DC 5V (±10%) • Interface: USB HID, RS232C, UART or IIC by order • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Interface level: UART / IIC 3.3V (5V tolerance) • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max.150mA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 86.5mm * 65mm * 11.2mm (without Antenna) • Weight: About 30g (without Antenna) • ISP: Supported • RoHS: Compliant • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY6022 is a contactless IC card embedded reading and writing module designed based on the NXP scheme. It fully supports the MIFARE series and ISO14443A and ISO14443B T=CL non-contact CPU cards. The RF field strength is basically meeting the requirements of EMV2010 and PBOC 3.0. The card reader has built-in SAM card slot, supports any SAM card that conforms to the ISO7816 (T=0 & T=1) standard, and supports the reset and operation of any rate of SAM card. The 32- bit ARM microcontroller ensures that the reader has good performance and reliability. Main Characteristics • Modules integrated antenna, excellent consistency and stability • EMV2010 certification ability in RF part • 2 SAM slots, full fill payment system usage • 48MHz high speed MCU; 4Mbits external storage • External low-power RSA/ECC algorithm encryption chip Qualifications • PCD: NXP RC663 • PCB Layers：4 • Working frequency: 13.56MHz • RF standard: ISO14443A、ISO14443B、ISO15693、ISO18000-3 MODE3 • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Supported, default OFF, could be set • SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps • Power supply: DC 5V (±10%) • Interface: UART\RS232\USB HID\USB PCSC on order • Interface level: UART 3.3V (5V tolerance) • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max.150mA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 100mm * 70mm * 12mm • Weight: About 30g • ISP: Supported • RoHS: By order • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY6011 is a series of RFID read/write module with UART or IIC and USB HID communication ports. JMY6011 has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is integrated. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. Main Characteristics • Modules integrated antenna, excellent consistency and stability • Light and slim • RF protocol in accordance with EMV2010 Qualifications • PCD: NXP RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Termsed, default OFF, could be set • Data FLASH: 512 Bytes • Power supply: DC 5V (±10%) • Interface: UART, IIC or USB HID on order • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Max.command length: JCP04: 253bytes JCP05: 510bytes • Interface level: UART / IIC: 3.3V (TTL level; 5V tolerance, by pull up) • Power consumption: 150mA • Operating distance: 90mm (M1 typical distance, depending on card quality) • Dimension: 60mm*60mm*5.7mm • Weight: About 20g • ISP: Support • RoHS: By order • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Overview MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED which is with 8 bits LED displayer. The reader fully supports the IC card according to ISO14443A, ISO14443B, ISO15693 and ISO7816(T=0 & T=1); Various contactless IC card under international standard. The reader embeds SAM card slot. We do the optimization for application of domestic card system, so it can fully terms SAM card according to ISO7816 (9600bps & 38400bps). Main Characteristics • 8 digits LED displayer • Full function PC software • support many kind of card/tag, just like a development tool Technical parameters • PCD: NXP MF RC500, MF RC531, CL RC632, SL RC400 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 80mm (MIFARE One, typical) • SAM card slot: 1 slot, terms ISO7816 (T=0, 9600bps&38400bps) • Interface: USB (build in CP2102 USB to RS232 bridge) • Baud rate: 9600 ~ 115200 bps • Power supply: DC5V ± 10% • Power consumption: 1.5W • Dimension: 141mm * 100mm * 31mm • Weight: about 150g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: TransWin • SDK: Base on Windows, free • Sample code: VC, VB, C++ Builder, DELPHI, Power Builder • ISP: Terms • RoHS: By order

Minimum Order: 1 bags

Overview MR730 series desktop contactless IC card reader/writer is base on NXP series RF chip. The communication port is Ethernet. The reader fully supports the IC card according to ISO14443 and ISO15693 standard, especially completely supports ISO14443-4 contactless CPU card. The reader builds in SAM slot, and supports SAM according to ISO7816 (Max. 115200bps). Main Characteristics • Ethernet interface • High speed MCU and advantage firmware provide very high card process speed • Full function PC software Technical parameters • PCD: NXP MF RC500, MF RC531, CL RC632, SL RC400 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 80mm (MIFARE One, typical) • SAM slot: 1 slot, terms ISO7816 (T=0 & T=1, terms PPS, Max. 115200bps) • Interface: Ethernet RJ45 • Baud rate: 9600 ~ 115200 BPS • Power supply: AC adaptor DC5V • Power consumption: 1.5W • Dimension: 141mm * 100mm * 31mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: TransWin • SDK: Base on Windows, free • Sample code: VC, VB, C++ Builder, DELPHI, Power Builder • ISP: Terms • RoHS: By order

Minimum Order: 1 bags

Overview MR780 series desktop contactless IC card reader/writer is base on NXP series RF chip with high performance MCU. The reader fully supports the IC card according to ISO14443 and ISO15693 standard, especially completely supports ISO14443-4 contactless CPU card. The reader builds in 3 SAM slots, and fully supports SAM according to ISO7816. Main Characteristics • Full function PC software • High speed MCU and advantage firmware provide very high card process speed • RF interface and protocol process with EMV2010 LEVEL 1 certification ability Technical parameters • PCD: NXP MF RC500, MF RC531, CL RC632, SL RC400 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 100mm (MIFARE One, typical) • SAM card slot: 3 slots, terms ISO7816 (T=0 & T=1, terms PPS, Max. 115200bps) • Display: 1 tri-color LED • Buzzer: Build in • Interface: RS232C or USB (build in CP2102 USB to RS232 bridge) • Baud rate: 9600~115200bps • Power supply: DC5V ± 10% • Power consumption: 0.9W • Dimension: 123mm * 88mm * 25mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: TransWin • SDK: Base on Windows, free • Sample code: VC, VB, C++ Builder, DELPHI, Power Builder • ISP: Terms • RoHS: By order

Minimum Order: 1 bags

Overview MR7801 series reader supports series IC cards according to ISO14443, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader's RF interface and protocol process are with EMV2010 LEVEL 1 certification ability. There are 4 SAM card slots in the reader(T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset. Meanwhile the new outside casing show you a fresh and respect. Main Characteristics • Full function PC software • Terms many kind of card/tag • RF interface and protocol process with EMV2010 LEVEL 1 certification ability Technical parameters • PCD: NXP MF RC531, CL RC632, SL RC400 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 100mm (MIFARE One, typical) • SAM card slot: 4 slots, terms ISO7816 (T=0 & T=1, terms PPS, Max. 115200bps) • Display: 4 LEDs, blue, yellow, green, red • Buzzer: Build in • Interface: USB (build in CP2102 USB to RS232 bridge) • Power supply: DC5V ± 10% • Power consumption: 0.9W • Dimension: 135mm * 100mm * 45mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: TransWin • SDK: Base on Windows, free • Sample code: VC, VB, C++ Builder, DELPHI, Power Builder • ISP: Terms • RoHS: By order

Minimum Order: 1 bags

Overview MR762 series desktop contactless IC card reader is based on NXP series RF chip with high performance MCU. The communication is according to USB HID standard. There are 2 USB devices to implement the functions. One is USB keyboard for DATA output. The other is USB compliant device for DATA output format configuration and ISP function. The DATA output format is very flexible. The reader could output any sector any byte in any format. TransConfig, the configuration tool is very easy to use to load the configuration file to reader. The configuration file is easy to build. Please to read “JINMUYU USB HID Keyboard Simulator IC Card Reader General Technical Manual.pdf” to build the configuration files. And we will help you to make the configuration file. The reader supports the IC card according to ISO14443A, ISO14443B and ISO15693 standard. Main Characteristics • USB HID keyboard simulator data output • Data output format is very flexible • RF interface and protocol process with EMV2010 LEVEL 1 certification ability Technical parameters • PCD: NXP MF RC500, MF RC531, SL RC400, CL RC632 • Working frequency: 13.56MHz • RF protocol: ISO14443A, ISO14443B, ISO15693 • Operating distance: 100mm (MIFARE One, typical) • Display: 1 tricolor LED • Buzzer: Build in • Interface: dual port, USB HID keyboard simulator and USB HID compliant device • Power supply: DC5V ± 10% • Power consumption: 0.9W • Dimension: 123mm * 88mm * 25mm • Weight: About 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: no need, direct output to editor • ISP: Terms • RoHS: Compliant

Minimum Order: 1 bags

Overview MR7622 series desktop contactless IC card reader is based on NXP series RF chip with high performance MCU. The communication is according to USB HID standard. There are 2 USB devices to implement the functions. One is USB keyboard for DATA output. The other is USB compliant device for DATA output format configuration and ISP function. The DATA output format is very flexible. The reader could output any sector any byte in any format. TransConfig, the configuration tool is very easy to use to loadthe configuration file to reader. The configuration file is easy to build. Please to read “JINMUYU USB HID Keyboard Simulator IC Card Reader General Technical Manual.pdf” to build the configuration files. And we will help you to make the configuration file. The reader supports the IC card according to ISO14443A, ISO14443B and ISO15693 standard. Main Characteristics • USB HID keyboard simulator data output • Data output format is very flexible • RF interface and protocol process with EMV2010 LEVEL 1 certification ability • Delicate outer covering Technical parameters • PCD: MF RC531, SL RC400, CL RC632 • Working frequency: 13.56MHz • RF protocol: ISO14443A, ISO14443B • Operating distance: 100mm (MIFARE One, typical) • Display: 4 LEDs, blue, yellow, green, red • Buzzer: Build in • Interface: dual port, USB HID keyboard simulator and USB HID compliant device • Power supply: DC5V ± 10% • Power consumption: 0.9W • Dimension: 135mm * 100mm * 45mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: no need, direct output to editor • ISP: Terms • RoHS: By order

Minimum Order: 1 bags

Overview MR763 series desktop contactless IC card reader is based on NXP series RF chip with high performance MCU. The communication is according to USB HID standard. There are 2 USB devices to implement the functions. One is USB keyboard for DATA output. The other is USB compliant device for DATA output format configuration and ISP function. The DATA output format is very flexible. The reader could output any sector any byte in any format. TransConfig, the configuration tool is very easy to use to load the configuration file to reader. The configuration file is easy to build. Please to read “JINMUYU USB HID Keyboard Simulator IC Card Reader General Technical Manual.pdf” to build the configuration files. And we will help you to make the configuration file. The reader supports the IC card according to ISO14443A, ISO14443B standard. Main Characteristics • USB HID keyboard simulator data output • Data output format is very flexible • Cheap Technical parameters • PCD: NXP MF RC522, MF RC523 • Working frequency: 13.56MHz • RF protocol: ISO14443A, ISO14443B • Operating distance: 80mm (MIFARE One, typical) • Display: 1 tricolor LED • Buzzer: Build in • Interface: dual port, USB HID keyboard simulator and USB HID compliant device • Power supply: DC5V ± 10% • Power consumption: 0.9W • Dimension: 123mm * 88mm * 25mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: no need, direct output to editor • ISP: Terms • RoHS: By order

Minimum Order: 1 bags