Security & Protection

What is the FEATURES of our GPS tracker? Single Locating Auto track continuously Track with limited times upon time interval Track with unlimited times upon time interval Smart track upon time and distance interval Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Forward the third parties’ message Charges Inquiry Low battery alarm Power off alarm GPS blind Spot alert SOS (FOR 311B and 311C) Geo-fence Movement alarm Over speed alarm ACC working alarm engine stop 3-aixs accelaration sensor ACC alarm Silent Mode Alarm without GSM network service Sleep Mode Terminal (local) Time Setting TCP/UDP switch Configure parameters by USB Modes Switch between SMS and GPRS Set up monitor center number

Minimum Order: 100

What is the FEATURES of our GPS tracker? Single Locating Auto track continuously Track with limited times upon time interval Track with unlimited times upon time interval Smart track upon time and distance interval Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Forward the third parties’ message Charges Inquiry Low battery alarm Power off alarm GPS blind Spot alert SOS (FOR 311B and 311C) Geo-fence Movement alarm Over speed alarm ACC working alarm engine stop 3-aixs accelaration sensor ACC alarm Silent Mode Alarm without GSM network service Sleep Mode Terminal (local) Time Setting TCP/UDP switch Configure parameters by USB Modes Switch between SMS and GPRS Set up monitor center number

Minimum Order: 100

What is the FEATURES of our GPS tracker? Single Locating Auto track continuously Track with limited times upon time interval Track with unlimited times upon time interval Smart track upon time and distance interval Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Forward the third parties’ message Charges Inquiry Low battery alarm Power off alarm GPS blind Spot alert SOS (FOR 311B and 311C) Geo-fence Movement alarm Over speed alarm ACC working alarm engine stop 3-aixs accelaration sensor ACC alarm Silent Mode Alarm without GSM network service Sleep Mode Terminal (local) Time Setting TCP/UDP switch Configure parameters by USB Modes Switch between SMS and GPRS Set up monitor center number

Minimum Order: 100

What is the FEATURES of our GPS tracker? Single Locating Auto track continuously Track with limited times upon time interval Track with unlimited times upon time interval Smart track upon time and distance interval Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Forward the third parties’ message Charges Inquiry Low battery alarm Power off alarm GPS blind Spot alert SOS (FOR 311B and 311C) Geo-fence Movement alarm Over speed alarm ACC working alarm engine stop 3-aixs accelaration sensor ACC alarm Silent Mode Alarm without GSM network service Sleep Mode Terminal (local) Time Setting TCP/UDP switch Configure parameters by USB Modes Switch between SMS and GPRS Set up monitor center number

Minimum Order: 100

What is the FEATURES of our GPS tracker? Single Locating Auto track continuously Track with limited times upon time interval Track with unlimited times upon time interval Smart track upon time and distance interval Automatic update positions of vehicle turns GPS drift suppression Absolute street address by SMS Location based service (LBS) Forward the third parties’ message Charges Inquiry Low battery alarm Power off alarm GPS blind Spot alert SOS (FOR 311B and 311C) Geo-fence Movement alarm Over speed alarm ACC working alarm engine stop 3-aixs accelaration sensor ACC alarm Silent Mode Alarm without GSM network service Sleep Mode Terminal (local) Time Setting TCP/UDP switch Configure parameters by USB Modes Switch between SMS and GPRS Set up monitor center number

Minimum Order: 100

Cleanroom ESD Coveralls Bunny Suits Cleanroom apparels are specifically designed to protect the process from the operative's personal contamination. Our cleanroom ESD coveralls are made of a specific anti-static fabric which is woven with continuous polyeser filaments and conductive fibres. The washable fabric allows the coveralls stand up to repeated launderings. These reusable garments reduce cost, provide comfort and durability, and are available in designs to meet most cleanroom applications, including static safety and cleanroom particle requirements (up to Class 10). Features: Reduces contamination in low lint and critical areas. Manufactured and packaged in cleanrooms to prevent pollution from air. Anti-static, static dissipative, silicone-free coverall. Soft and breathable fabric provides comfort. Elastic wrist, ankles, and rear waist for a secure fit. Collar with snap and vertical front zipper closure with flap. Launderable. Specifications: Fa , bric conposition: continuous polyeser filaments + conductive fibres Available in sizes: SS-5XL Feature: anti-static/static dissipative, launderable

Minimum Order: 100

Description JMY6025 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Main Characteristics • Modules integrated antenna, excellent consistency and stability • EMV2010 certification ability in RF part • 2 SAM slots, full fill payment system usage • WIFI network interface Qualifications • PCD: NXP RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A、ISO14443B、ISO15693、ISO18000-3 MODE3 • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Supported, default OFF, could be set • SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps, 230400bps • Power supply: DC 5V (±10%) • Interface: WIFI network, USB HID • Communication speed: UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps, 230400bps USB:2.0 HID class • Power consumption: Max.150mA • Operating distance: 70mm (M1 typical distance, depending on card quality) • Dimension: 100mm * 70mm * 12mm • Weight: About 30g • ISP: Supported • RoHS: By order • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY6122 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 50ohm coaxial cable are linked the antenna and module. Main Characteristics • Module split antenna, connected by 50ohm coaxial cable, flexible antenna size and layout • EMV2010 certification ability • 4 SAM slots and 512K bytes data FLASH, full fill payment system usage Qualifications • PCD model: NXP CL RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693, ISO7816 • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Termsed, default OFF, could be set • SAM slots: 4, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps • Power supply: DC 5V (±10%) • Interface: USB HID, RS232C, UART or IIC by order • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Interface level: UART / IIC 3.3V (5V tolerance) • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max.150mA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 86.5mm * 65mm * 11.2mm (without Antenna) • Weight: About 30g (without Antenna) • ISP: Supported • RoHS: Compliant • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY6022 is a contactless IC card embedded reading and writing module designed based on the NXP scheme. It fully supports the MIFARE series and ISO14443A and ISO14443B T=CL non-contact CPU cards. The RF field strength is basically meeting the requirements of EMV2010 and PBOC 3.0. The card reader has built-in SAM card slot, supports any SAM card that conforms to the ISO7816 (T=0 & T=1) standard, and supports the reset and operation of any rate of SAM card. The 32- bit ARM microcontroller ensures that the reader has good performance and reliability. Main Characteristics • Modules integrated antenna, excellent consistency and stability • EMV2010 certification ability in RF part • 2 SAM slots, full fill payment system usage • 48MHz high speed MCU; 4Mbits external storage • External low-power RSA/ECC algorithm encryption chip Qualifications • PCD: NXP RC663 • PCB Layers：4 • Working frequency: 13.56MHz • RF standard: ISO14443A、ISO14443B、ISO15693、ISO18000-3 MODE3 • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Supported, default OFF, could be set • SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps • Power supply: DC 5V (±10%) • Interface: UART\RS232\USB HID\USB PCSC on order • Interface level: UART 3.3V (5V tolerance) • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max.150mA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 100mm * 70mm * 12mm • Weight: About 30g • ISP: Supported • RoHS: By order • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY6011 is a series of RFID read/write module with UART or IIC and USB HID communication ports. JMY6011 has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is integrated. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. Main Characteristics • Modules integrated antenna, excellent consistency and stability • Light and slim • RF protocol in accordance with EMV2010 Qualifications • PCD: NXP RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Termsed, default OFF, could be set • Data FLASH: 512 Bytes • Power supply: DC 5V (±10%) • Interface: UART, IIC or USB HID on order • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Max.command length: JCP04: 253bytes JCP05: 510bytes • Interface level: UART / IIC: 3.3V (TTL level; 5V tolerance, by pull up) • Power consumption: 150mA • Operating distance: 90mm (M1 typical distance, depending on card quality) • Dimension: 60mm*60mm*5.7mm • Weight: About 20g • ISP: Support • RoHS: By order • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Overview MR600 series contactless smart reader is the desktop reader bases on NXP PCD or compatible PCD. The reader inlays LED which is with 8 bits LED displayer. The reader fully supports the IC card according to ISO14443A, ISO14443B, ISO15693 and ISO7816(T=0 & T=1); Various contactless IC card under international standard. The reader embeds SAM card slot. We do the optimization for application of domestic card system, so it can fully terms SAM card according to ISO7816 (9600bps & 38400bps). Main Characteristics • 8 digits LED displayer • Full function PC software • support many kind of card/tag, just like a development tool Technical parameters • PCD: NXP MF RC500, MF RC531, CL RC632, SL RC400 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 80mm (MIFARE One, typical) • SAM card slot: 1 slot, terms ISO7816 (T=0, 9600bps&38400bps) • Interface: USB (build in CP2102 USB to RS232 bridge) • Baud rate: 9600 ~ 115200 bps • Power supply: DC5V ± 10% • Power consumption: 1.5W • Dimension: 141mm * 100mm * 31mm • Weight: about 150g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: TransWin • SDK: Base on Windows, free • Sample code: VC, VB, C++ Builder, DELPHI, Power Builder • ISP: Terms • RoHS: By order

Minimum Order: 1 bags

Overview MR730 series desktop contactless IC card reader/writer is base on NXP series RF chip. The communication port is Ethernet. The reader fully supports the IC card according to ISO14443 and ISO15693 standard, especially completely supports ISO14443-4 contactless CPU card. The reader builds in SAM slot, and supports SAM according to ISO7816 (Max. 115200bps). Main Characteristics • Ethernet interface • High speed MCU and advantage firmware provide very high card process speed • Full function PC software Technical parameters • PCD: NXP MF RC500, MF RC531, CL RC632, SL RC400 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 80mm (MIFARE One, typical) • SAM slot: 1 slot, terms ISO7816 (T=0 & T=1, terms PPS, Max. 115200bps) • Interface: Ethernet RJ45 • Baud rate: 9600 ~ 115200 BPS • Power supply: AC adaptor DC5V • Power consumption: 1.5W • Dimension: 141mm * 100mm * 31mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: TransWin • SDK: Base on Windows, free • Sample code: VC, VB, C++ Builder, DELPHI, Power Builder • ISP: Terms • RoHS: By order

Minimum Order: 1 bags

Overview MR780 series desktop contactless IC card reader/writer is base on NXP series RF chip with high performance MCU. The reader fully supports the IC card according to ISO14443 and ISO15693 standard, especially completely supports ISO14443-4 contactless CPU card. The reader builds in 3 SAM slots, and fully supports SAM according to ISO7816. Main Characteristics • Full function PC software • High speed MCU and advantage firmware provide very high card process speed • RF interface and protocol process with EMV2010 LEVEL 1 certification ability Technical parameters • PCD: NXP MF RC500, MF RC531, CL RC632, SL RC400 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 100mm (MIFARE One, typical) • SAM card slot: 3 slots, terms ISO7816 (T=0 & T=1, terms PPS, Max. 115200bps) • Display: 1 tri-color LED • Buzzer: Build in • Interface: RS232C or USB (build in CP2102 USB to RS232 bridge) • Baud rate: 9600~115200bps • Power supply: DC5V ± 10% • Power consumption: 0.9W • Dimension: 123mm * 88mm * 25mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: TransWin • SDK: Base on Windows, free • Sample code: VC, VB, C++ Builder, DELPHI, Power Builder • ISP: Terms • RoHS: By order

Minimum Order: 1 bags

Overview MR7801 series reader supports series IC cards according to ISO14443, ISO15693; various contactless IC card under international standard; especially the contactless CPU cards under ISO14443-4. Meanwhile the reader's RF interface and protocol process are with EMV2010 LEVEL 1 certification ability. There are 4 SAM card slots in the reader(T=0 and T=1). The reader supports card-reset of various communication rate; PPSS operation after card-reset. Meanwhile the new outside casing show you a fresh and respect. Main Characteristics • Full function PC software • Terms many kind of card/tag • RF interface and protocol process with EMV2010 LEVEL 1 certification ability Technical parameters • PCD: NXP MF RC531, CL RC632, SL RC400 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Operating distance: 100mm (MIFARE One, typical) • SAM card slot: 4 slots, terms ISO7816 (T=0 & T=1, terms PPS, Max. 115200bps) • Display: 4 LEDs, blue, yellow, green, red • Buzzer: Build in • Interface: USB (build in CP2102 USB to RS232 bridge) • Power supply: DC5V ± 10% • Power consumption: 0.9W • Dimension: 135mm * 100mm * 45mm • Weight: about 100g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • PC software: TransWin • SDK: Base on Windows, free • Sample code: VC, VB, C++ Builder, DELPHI, Power Builder • ISP: Terms • RoHS: By order

Minimum Order: 1 bags