Water Safety

The Multiparameter Water Quality Sonde is a modular underwater monitoring instrument designed for comprehensive water analysis in field environments. The sonde integrates multiple interchangeable sensing modules within a single submersible body, allowing users to configure monitoring parameters according to different project requirements. Unlike compact integrated probes that mainly target basic online monitoring, this Advanced Multiparameter Water Quality Sonde is more oriented toward expandable field deployment and multi-parameter environmental surveys. The platform supports long-term operation in demanding outdoor conditions and can be connected to buoys, monitoring stations, portable devices, and telemetry systems.

The AsenHe Wave Sensor is a compact, high-precision ocean wave measurement module designed for real-time monitoring of sea state parameters. Based on advanced 9-axis MEMS inertial measurement technology (MEMS-IMU) and an intelligent wave dynamics algorithm, the sensor accurately measures wave height, wave period, wave direction, wave spectrum, and directional spectrum without requiring bulky mechanical components. Its lightweight structure, low power consumption, and excellent long-term stability make it an ideal solution for oceanographic buoys, marine research platforms, offshore engineering, and environmental monitoring systems. The Wave Sensor utilizes an STM32 microprocessor with proprietary ocean wave processing algorithms to minimize accumulated errors during acceleration, velocity, and displacement calculations, delivering reliable wave observations even under complex sea conditions.

The Navigation Buoy is a floating marine marker designed for identifying harbor entrances, approach channels, and vessel access routes. The buoy provides clear visual reference points for incoming and outgoing marine traffic, helping improve navigation efficiency and operational safety in port areas. Unlike standard navigation buoys focused on offshore channel systems, this Navigation Buoy Supplier is specially developed for harbor access management and near-port vessel guidance. The structure emphasizes visibility, positional stability, and compatibility with harbor navigation systems. Manufactured by Suzhou Asenhe the buoy supports various structural sizes and signaling configurations for different harbor environments. Core Value ● Designed for harbor entrance and channel identification ● Provides visual guidance for vessel navigation routes ● Suitable for ports, terminals, and marina access areas ● Supports day and night marine signaling configurations ● Adaptable to different harbor management requirements

The ASH-432-A Wave Buoy is a long-endurance drifting buoy engineered for offshore and open-ocean observation. Designed to travel naturally with ocean currents, it continuously records and transmits positional and environmental information, enabling researchers to monitor large-scale marine processes over extended periods. Unlike conventional moored buoys that remain fixed at a single location, the Wave Buoy provides dynamic spatial observations by moving with the surrounding water mass. This makes it an ideal platform for studying ocean circulation, current transport, climate variability, and marine environmental change across vast ocean regions. Built with a rugged marine-grade floating body and a modular electronics architecture, the ASH-432-A supports multiple communication systems and expandable scientific sensors, allowing users to configure the platform for a wide range of research and monitoring applications.

The Small Water Quality Monitoring Buoy is a compact floating platform designed for localized water quality observation in rivers, lakes, reservoirs, canals, and aquaculture facilities. Its space-efficient structure enables quick deployment in areas where large monitoring buoys are unnecessary or difficult to install, while still providing continuous online environmental monitoring. Unlike offshore monitoring buoys that focus on large-scale marine observation, this product is specifically developed for nearshore and inland water applications. The buoy combines a lightweight floating body, integrated power system, water quality sensors, and wireless communication into a compact monitoring solution suitable for routine environmental management. Core Value ● Compact design for confined and inland water environments ● Rapid installation with minimal deployment requirements ● Continuous online monitoring of key water quality indicators ● Low-power operation for extended field use ● Flexible integration with remote monitoring platforms

Product Overview The 100m3 Galvanized Steel Water Tank, also known as a Hot Dip Galvanized Water Tank or pressed steel water tank, is a reliable and durable solution for medium-capacity water storage. Manufactured from high-quality Q235 carbon steel plates and treated with hot-dip galvanization (60-90um coating), this Galvanized Steel Water Tank offers excellent corrosion resistance and long service life. A 100m3 galvanized steel water tank is a practical sectional water storage solution for building water supply, fire water storage, industrial water systems, agricultural irrigation and municipal water projects. The tank is assembled from hot dipped galvanized Q235 steel panels, offering good structural strength, corrosion resistance and flexible on-site installation. Compared with one-piece welded tanks, a galvanized steel sectional water tank is easier to transport, assemble and maintain. The 100m3 capacity is suitable for medium-volume water storage projects where buyers need stable performance, customizable structure and cost-effective steel tank construction. This 100m3 galvanized steel water tank is made from pressed steel panels with bolted connections and sealing materials. The modular panel structure allows the tank to be assembled according to the required length, width and height. Different panel sizes and thicknesses can be selected according to tank design, water pressure and installation conditions. The hot dipped galvanized surface treatment provides a zinc coating layer on the steel panel surface, helping protect the tank from corrosion in humid, outdoor or industrial environments. Specification Panel Size: 1.22*1.22m, 1*1m, 1*0.5m, 0.5*0.5m Tank Volume: 1-1000m3 Panel Thickness: 1.5mm-5.0mm Raw Material: Q235 Steel Panel Surface Treatment: Hot dipped galvanized Galvanization Thickness: 60-90um Panel Sizes for Flexible Tank Assembly 1.22x1.22m: Commonly used for large tank wall and base sections. 1x1m: Standard panel size for flexible tank assembly. 1x0.5m: Used for height adjustment and partial structure matching. 0.5x0.5m: Used for small-area adjustment and special layout requirements. This modular structure makes the 100m3 galvanized steel water tank suitable for both standard and customized water storage projects. Panel Weight 0.5x0.5m panel: 5.3kg (2mm), 6.9kg (2.5mm), 8kg (3mm), 11kg (4mm), 13.9kg (5mm). 1x0.5m panel: 9.5kg (2mm), 12.5kg (2.5mm), 14.7kg (3mm), 20kg (4mm), 25.5kg (5mm). 1x1m panel: 17.4kg (2mm), 22.7kg (2.5mm), 26.6kg (3mm), 36.2kg (4mm), 46kg (5mm). 1.22x1.22m panel: 33.6kg (2.5mm), 39.3kg (3mm), 53.7kg (4mm), 68kg (5mm). The panel weight data helps project buyers estimate shipping volume, lifting requirements and installation labor before purchasing. How to Choose Panel Thickness Panel thickness should be selected according to tank height, water pressure, installation location and structural requirements. For a 100m3 galvanized steel water tank, thicker panels are usually used in lower sections because they bear greater water pressure. Tank Height: Higher tanks create greater water pressure. Tank Capacity: Larger water volume requires stronger structural support. Installation Site: Outdoor or industrial sites may require stronger panels. Foundation Condition: Stable foundation helps maintain tank safety. Water Usage: Fire water, industrial water or daily water supply may require different designs. Maintenance Requirement: Proper thickness supports long-term stable operation.

1.22*1.22m Panel HDG Water Tank Product Link: https://www.kaixuanvictortank.com/products/1-22-1- , 22m-panel-hdg- water-tank.html Product Overview The 1.22*1.22m Panel HDG Water Tank, also known as a Hot Dip Galvanized Water Tank or Pressed Steel Water Tank, is a cost-effective and highly durable solution for water storage. Compared with traditional 1m panel tanks, this Galvanized Steel Water Tank reduces installation time and material cost while allowing tank height up to 6 meters. Kaixuan Victor supplies hot dip galvanized sectional water tanks for industrial water storage, fire water systems, building water supply, agricultural irrigation, municipal projects and temporary water storage applications. With a capacity range from 1 m3 to 1000 m3, the tank can be customized to meet different project requirements and installation conditions. The Galvanized Steel Water Tank adopts a modular panel design, enabling flexible assembly for capacities ranging from 1m3 to 1000m3. Panel sizes include 1.22x1.22m, 1x1m, 1x0.5m, and 0.5x0.5m, offering adaptability to different project requirements. This steel sectional water tank is widely used due to its robust structure, easy transportation, and quick on-site installation. Technical Specifications Capacity Range: 1 - 1000 m3 Tank Height: Up to 6 meters Panel Thickness: 1.5mm - 5.0mm Material: Q235 Carbon Steel Surface Treatment: Hot Dip Galvanized (60-90um) Tensile Strength: >=350 MPa Yield Strength: >=220 MPa Customization Options Tank Size & Capacity: Custom dimensions based on site. Material Options: Galvanized steel, stainless steel, fiberglass. Accessories: Flanges, ladders, water level indicators. Color & Coating: Optional painting or additional protection. Specification Panels: Bottom, wall, and roof panels assembled with bolts. Internal Structure: Tie rods, supports, and ladders for reinforcement. Sealing System: Food-grade EPDM or silicone rubber between panels. Base: C/U steel base ensuring stable foundation. Key Advantages Strong Q235 Carbon Steel Structure: The tank panels are made from Q235 carbon steel, offering good mechanical strength and structural stability for water storage applications. With tensile strength >=350 MPa and yield strength >=220 MPa, the tank is suitable for medium and large water storage projects requiring stable load-bearing performance. Hot Dip Galvanized Corrosion Protection: The surface is treated with hot dip galvanizing, forming a zinc coating of 60-90um. This protective layer helps reduce corrosion risk when the tank is used in outdoor, industrial or humid environments. Hot dip galvanized steel panels are commonly selected for projects that require a balance between durability, cost control and structural strength. Modular Sectional Design: The sectional panel structure makes the tank easier to transport and install. Panels can be packed compactly for shipment and assembled on site using bolts and sealing components. This is useful for projects where large welded tanks are difficult to transport or where site access is limited. Flexible Capacity from 1 m3 to 1000 m3: The tank can be designed according to different water storage volumes, from small building water tanks to large industrial or municipal water storage systems. The modular design allows flexible adjustment of length, width and height. Suitable for Indoor and Outdoor Installation: Hot dip galvanized sectional water tanks can be used in indoor equipment rooms, rooftop areas, outdoor foundations, industrial plants, construction sites and agricultural fields. Optional painting or additional protective coating can be applied when the project environment requires extra surface protection. Structure 1. Panels (Bottom panel, wall panel, roof panel and manhole) 2. Internal parts (Internal ladder, tiepiece rod, support, flanges and rubber). The material can be galvanized steel, stainless steel or fiberglass. 3. External parts (External ladder, angle iron, bolts and nuts). The material can be galvanized steel and stainless steel. 4. C/U-steel base (surface treatment can be painted, hot dipped galvanized or stainless steel). Customization is available.

200m3 Potable Water GRP Modular Water Tank Product Link: https://www.kaixuanvictortank.com/products/200m3-p , otable-water- grp-modular-water-tank.html Product Overview The 200m3 Potable Water GRP Modular Water Tank, also known as a Fiberglass Sectional Water Tank or FRP panel water tank, is a hygienic and high- performance solution specifically designed for drinking water storage. Manufactured using premium Glass Reinforced Plastic (GRP), this GRP Sectional Water Tank ensures excellent corrosion resistance, lightweight structure, and long-term durability. The 200m3 GRP water tank for potable water is a modular FRP sectional tank specifically designed for safe and hygienic drinking water storage. Manufactured with high-quality SMC panels, this tank ensures clean water conditions, strong durability, and long-term performance. With a capacity of 200 cubic meters, this GRP drinking water tank is widely used in residential buildings, municipal water systems, hospitals, and commercial projects requiring reliable potable water storage. Technical Specifications Tank Capacity: Up to 1000m3 Standard Capacity: 200m3 Panel Material: Glass Reinforced Plastic (GRP/FRP) Panel Size: 1x1m, 1x0.5m, 0.5x0.5m Panel Thickness: 5mm - 24mm Internal Reinforcement: SS304 / SS316 Sealing Material: Food-grade EPDM Temperature Range: 0C - 60C Key Features Hygienic and Safe for Drinking Water: The GRP material and SMC panels ensure a clean internal surface, making the tank suitable for potable water storage without contamination risks. Corrosion-Resistant and Rust-Free: Unlike metal tanks, the GRP structure does not rust, ensuring long-term water quality and significantly reduced maintenance costs over time. Modular Sectional Design: The panel-based system allows for easy international transportation, flexible installation in tight spaces, and efficient assembly at project sites. High-Strength SMC Panel Construction: SMC molded panels provide strong mechanical performance and structural stability, specifically engineered for medium-capacity water storage. Customizable Design: Tank size, dimensions, panel thickness, and reinforcement can be customized to meet the specific requirements of different potable water systems. Long Service Life: With proper installation and maintenance, the tank is designed to operate reliably for more than 20 years. Structure & Working Principle The GRP Sectional Water Tank is composed of modular fiberglass panels that are assembled on-site using a bolted connection system. Each panel is precision- molded to ensure structural consistency and strength. Sealing materials such as food-grade EPDM are installed between panels to create a watertight structure. Internally, stainless steel reinforcements distribute water pressure evenly, maintaining tank stability even at full capacity. The sectional design allows flexible assembly, transportation, and installation, making the GRP Sectional Water Tank ideal for projects with limited access or special dimensional requirements. 1. Panels (Bottom panel, wall panel, roof panel and manhole) 2. Internal parts (Internal ladder, tiepiece rod, support, flanges and rubber). The material can be galvanized steel, stainless steel or fiberglass. 3. External parts (External ladder, angle iron, bolts and nuts). The material can be galvanized steel and stainless steel. 4. C/U-steel base (surface treatment can be painted, hot dipped galvanized or stainless steel). Customization is available. Roof Panel is Flat, will not store water on the top and leak into tank. Drawing & Design Before order, free water tank drawing is available and can help to understand water tank well. After order, full set of water tank drawing will be provided to support installation work. Steel Tower/support Drawing & Design: Before order, free steel tower drawing is available and can help to understand tower well. After order, full set of steel tower drawing will be provided to support installation work. Accessories PANELS: Size: 1000x1000mm, 1000x500mm, 500x500mm. Panel Weight: 10.5kg-29kg. BOLTS & NUTS & WASHERS: Material: Hot dipped galvanized & Stainless steel Grade 304/316 & Customized. BASE STEEL: C-Channel steel: Hot dip galvanized & painted & Stainless steel & Customized. INTERNAL STRUCTURE: Support & Lacing bar: Hot dipped galvanized & stainless steel & PVC & Customized. FLANGES: Inlet, Outlet, Drainage, Overflow, etc.: Hot dipped galvanized & stainless steel & PVC. SEALING RUBBER: Food grade white color EPDM or Silicon. LADDERS: Inner & Outer Ladder: Galvanized steel & stainless steel & Fiberglass. WATER INDICATOR: Glass Material & Steel with indicator. MANHOLE COVER: Standard size: 600x600mm, Customization is available. Applications Residential and Commercial Water Supply: Used as potable water tanks in apartment complexes, office buildings, and commercial facilities. Municipal Water Systems: Suitable for urban and rural drinking water storage and distribution networks. Hospitals and Public Facilities: Provides hygienic water storage for sensitive environments requiring high-standard clean water. Food and Service Industries: Applicable for water storage in facilities where water quality is critical to operations.

High Strength SMC Molded Water Tank Product Link: https://www.kaixuanvictortank.com/products/high-st , rength-smc- molded-water-tank.html Produ , ct Overview The High Strength SMC Molded Water Tank, also widely known as a GRP Water Tank, FRP water tank, or fiberglass sectional water tank, is an advanced modular storage solution designed for superior durability and hygiene. Manufactured using Sheet Molding Compound (SMC), this SMC Molded Water Tank features high mechanical strength and excellent resistance to corrosion, making it ideal for demanding environments. Compared with traditional materials, the SMC Molded Water Tank offers lightweight construction combined with high load-bearing capacity, especially suitable for tanks with heights up to 5 meters. The Korea-type panel design, commonly used in Middle Eastern markets, enhances panel strength and ensures long-term structural stability. Technical Specifications Capacity Range: 1 - 2000 m3 Panel Material: SMC (Fiberglass Reinforced Plastic) Panel Thickness: 5mm - 24mm Tank Height: Up to 5 meters or customized Temperature Resistance: -40C to 90C Sealing Material: Food-grade EPDM/Silicone Customization Options Each SMC Molded Water Tank can be tailored to project-specific requirements. Panel size, tank capacity, height, and color can be customized. Optional accessories include stainless steel ladders, water level indicators, and insulation layers. The customization process includes requirement analysis, structural design, drawing confirmation, production, and final inspection. OEM services are also available, ensuring the GRP Water Tank meets different regional standards and installation conditions. Key Features High-Strength SMC Molded Panels: SMC panels are formed under high temperature and pressure, resulting in high strength, uniform thickness, and stable performance under load. Modular Sectional Design: The tank uses a panel-based structure, allowing flexible assembly, easy transportation, and significantly reduced shipping costs for international projects. Excellent Corrosion Resistance: The GRP material ensures the tank remains rust- free and suitable for humid, coastal, and harsh outdoor environments. Hygienic and Suitable for Potable Water: The smooth internal surface and non- toxic material properties make this tank ideal for clean drinking water storage. Flexible Customization: Tank size, capacity, panel thickness, and reinforcement structures can all be customized based on site conditions and project needs. Long Service Life: With proper installation and maintenance, the tank can operate reliably for more than 20 years. Working Principle & Structural Design The SMC Molded Water Tank adopts a sectional panel system assembled with bolts, nuts, and food-grade sealing materials. Each panel is compression molded under high temperature and pressure, ensuring uniform thickness and strength. The internal structure includes reinforced tie rods and supports that balance water pressure, while the modular panels are tightly connected to prevent leakage. The unique panel geometry increases rigidity, allowing the GRP Water Tank to maintain its shape even under full load conditions. This design also simplifies transportation and on-site assembly. 1. Panels (Bottom panel, wall panel, roof panel and manhole) 2. Internal parts (Internal ladder, tiepiece rod, support, flanges and rubber). The material can be galvanized steel, stainless steel or fiberglass. 3. External parts (External ladder, angle iron, bolts and nuts). The material can be galvanized steel and stainless steel. 4. C/U-steel base (surface treatment can be painted, hot dipped galvanized or stainless steel). Customization is available. Roof Panel is Flat, will not store water on the top and leak into tank. Drawing & Design Before order, free water tank drawing is available and can help to understand water tank well. After order, full set of water tank drawing will be provided to support installation work. Accessories PANELS: Size: 1000x1000mm, 1000x500mm, 500x500mm. Panel Weight: 10.5kg-29kg. BOLTS & NUTS & WASHERS: Material: Hot dipped galvanized & Stainless steel Grade 304/316 & Customized. BASE STEEL: C-Channel steel: Hot dip galvanized & painted & Stainless steel & Customized. INTERNAL STRUCTURE: Support & Lacing bar: Hot dipped galvanized & stainless steel & PVC & Customized. FLANGES: Inlet, Outlet, Drainage, Overflow, etc.: Hot dipped galvanized & stainless steel & PVC. SEALING RUBBER: Food grade white color EPDM or Silicon. LADDERS: Inner & Outer Ladder: Galvanized steel & stainless steel & Fiberglass. WATER INDICATOR: Glass Material & Steel with indicator. MANHOLE COVER: Standard size: 600x600mm, Customization is available. Applications Drinking Water Storage: Widely used as potable water tanks in residential, commercial, and municipal systems. Fire Fighting Systems: Reliable fire water storage for buildings, factories, and infrastructure projects. Agricultural Irrigation: Used in various irrigation systems, including elevated or ground-mounted installations. Rainwater Harvesting: Efficient for collecting and storing rainwater for sustainable reuse. Construction and Municipal Projects: Commonly used in infrastructure projects requiring modular and reliable water storage. Its adaptability makes the GRP Water Tank a preferred solution in regions with high temperature, humidity, or saline conditions. Package Panels: Packed by pallet. Accessories: Wooden Box or In bulk. Installation Process Step 1. Install steel footings on leveled concrete foundations. Step 2. Align GRP panels to be pre-assembled. Step 3. Place rubber sealant from ready-to-use roll between panels. Step 4. Connect panels with bolts and nuts. Step 5. Position bottom panel sections, and finish up base of tank. Step 6. Position three sides of the tank. Step 7. Position and fix roof panels and if required, roof support pipes and plates. Step 8. Install reinforcement if required. Step 9. Close up the tank with the fourth side. Step 10. Finish the internal or external reinforcement. Step 11. Fill and test. Installation Tools Installation tools: welding machine, electric wrench, electric drill, screwdriver, wrench, steel tape, glue gun, etc. Safety measures: safety helmet, gloves, anti smashing shoes, seat belt, etc. Key Advantages The SMC Molded Water Tank stands out for its high strength-to-weight ratio, corrosion resistance, and hygienic performance. Unlike metal tanks, it does not rust or contaminate water. The modular design allows flexible expansion and easy installation. Additionally, the smooth internal surface prevents algae growth, reducing maintenance requirements. Its long lifespan and stable performance make the GRP Water Tank a cost- effective investment for long-term water storage. After-Sales Service Comprehensive after-sales support is provided for every SMC Molded Water Tank. This includes technical consultation, installation guidance, and maintenance recommendations. Spare parts supply and troubleshooting assistance are available to ensure long-term reliability. Each project is documented for quality tracking, reinforcing confidence in product performance.

The 5m Korea Shape Panel SMC Water Tank is a high-performance SMC Water Tank, also known as a GRP Water Tank, FRP water tank, or fiberglass sectional water tank. Manufactured using advanced Sheet Molding Compound (SMC) technology, this modular water storage system is designed for superior strength, hygiene, and long-term durability. Compared with conventional tanks, the Korea shape panel design enhances mechanical performance and load distribution. This 5m SMC Water Tank is widely recognized in Middle Eastern markets such as UAE and Arabia due to its excellent resistance to high temperatures and harsh environmental conditions. OEM and customization services are fully available to meet different project requirements. Structure & Working Principle The 5m SMC Water Tank adopts a sectional panel structure assembled with high- strength bolts and food-grade sealing materials. Each panel is compression- molded under high temperature and pressure, ensuring consistent density and structural integrity. The tank structure includes wall panels, bottom panels, roof panels, manhole covers, internal reinforcements, and connection flanges. The Korea shape panel improves rigidity and reduces deformation under water pressure. Internal bracing systems distribute stress evenly, while anti-leak sealing ensures water tightness. This modular design allows flexible assembly and easy transportation. 1. Panels (Bottom panel, wall panel, roof panel and manhole) 2. Internal parts (Internal ladder, tiepiece rod, support, flanges and rubber). The material can be galvanized steel, stainless steel or fiberglass. 3. External parts (External ladder, angle iron, bolts and nuts). The material can be galvanized steel and stainless steel. 4. C/U-steel base (surface treatment can be painted, hot dipped galvanized or stainless steel). Customization is available. Roof Panel is Flat, will not store water on the top and leak into tank. Drawing & Design Before order, free water tank drawing is available and can help to understand water tank well. After order, full set of water tank drawing will be provided to support installation work. Accessories PANELS: Size: 1000x1000mm, 1000x500mm, 500x500mm. Panel Weight: 10.5kg-29kg. BOLTS & NUTS & WASHERS: Material: Hot dipped galvanized & Stainless steel Grade 304/316 & Customized. BASE STEEL: C-Channel steel: Hot dip galvanized & painted & Stainless steel & Customized. INTERNAL STRUCTURE: Support & Lacing bar: Hot dipped galvanized & stainless steel & PVC & Customized. FLANGES: Inlet, Outlet, Drainage, Overflow, etc.: Hot dipped galvanized & stainless steel & PVC. SEALING RUBBER: Food grade white color EPDM or Silicon. LADDERS: Inner & Outer Ladder: Galvanized steel & stainless steel & Fiberglass. WATER INDICATOR: Glass Material & Steel with indicator. MANHOLE COVER: Standard size: 600x600mm, Customization is available. Applications The 5m SMC Water Tank is suitable for a wide range of applications. It is commonly used in residential and commercial buildings for drinking water storage due to its hygienic and non-toxic material properties. In firefighting systems, it provides reliable emergency water reserves. In agriculture, the GRP Water Tank supports irrigation systems and livestock water supply. Industrial facilities use it for process water and cooling systems. It is also ideal for rainwater harvesting projects and fish farming, especially in regions requiring corrosion-resistant and temperature-stable storage solutions. Technical Specifications Panel Material: SMC (Fiberglass Reinforced Plastic) Panel Type: Korea Shape (Weight-based design) Capacity Range: 1M3 - 1000M3 Panel Thickness: 5mm - 24mm Temperature Resistance: -40C to 100C Water Quality: Food-grade safe Assembly Type: Bolted sectional Customization Options The 5m SMC Water Tank offers flexible customization to adapt to different project needs. Tank dimensions, capacity, panel thickness, color, and accessories can all be tailored. Optional components include stainless steel ladders, different flange materials, and advanced level indicators. The customization process starts with requirement confirmation, followed by engineering design and drawing support. After approval, production is arranged with strict quality control, ensuring every 5m SMC Water Tank meets performance expectations. Package Panels: Packed by pallet. Accessories: Wooden Box or In bulk. Installation Process Step 1. Install steel footings on leveled concrete foundations. Step 2. Align GRP panels to be pre-assembled. Step 3. Place rubber sealant from ready-to-use roll between panels. Step 4. Connect panels with bolts and nuts. Step 5. Position bottom panel sections, and finish up base of tank. Step 6. Position three sides of the tank. Step 7. Position and fix roof panels and if required, roof support pipes and plates. Step 8. Install reinforcement if required. Step 9. Close up the tank with the fourth side. Step 10. Finish the internal or external reinforcement. Step 11. Fill and test. Installation Tools Installation tools: welding machine, electric wrench, electric drill, screwdriver, wrench, steel tape, glue gun, etc. Safety measures: safety helmet, gloves, anti smashing shoes, seat belt, etc. Key Advantages The 5m SMC Water Tank stands out for its corrosion resistance, lightweight structure, and high strength. The fiberglass material prevents rust and ensures long service life even in aggressive environments. The Korea shape panel enhances structural stability, while the modular design simplifies installation and expansion. Additionally, the smooth inner surface prevents algae growth, making the GRP Water Tank ideal for potable water storage. Its excellent thermal insulation performance further improves usability in extreme climates. After-Sales Service Each SMC Water Tank is backed by comprehensive after-sales support. The team provides technical consultation, installation assistance, and maintenance guidance. Quality control records are maintained for every batch, and spare parts supply is guaranteed. Third-party inspection services are also available to ensure reliability and transparency.

Established in April 2016, Shenzhen Hoverstar Flight Technology Co., Ltd. is one of the national water rescue equipment suppliers dedicated to the R&D, manufacturing, and sales of water rescue equipment and water sports products. Anti-Drowning Light-weight, comfortable for wearing, along with a hit-and-inflate air bag included as well as including a 2L fresh water container for emergency use. SPECIFICATIONS OF ANTI-DROWNING BACKPACK Load capacity 150kg Initial buoyancy 75N CO2 air cartridges Special salt spray anti-rust treatment 360H (2 twin pack) Size Customized Weight 368g

Established in April 2016, Shenzhen Hoverstar Flight Technology Co., Ltd. is one of the national water rescue equipment suppliers dedicated to the R&D, manufacturing, and sales of water rescue equipment and water sports products. Havospark is an innovative brand for professional water safety gear and water rescue devices for first responders, lifeguards, coastguards, river patrol, boats, and yachts. Hoverstar also designs and makes recreational water sports equipment for diving, snorkeling, foiling, and surfing. FEATURED WATER RESCUE PRODUCTS Water Rescue Products Speed is everything in saving lives on the water. Use Havospark for faster and safer rescue operations. Water Sports Products Water makes up over 2 / 3 of the surface of planet Earth. Be there and play with Havospark. Aquajet Dive H2 Hover Foil H5 Hover Skubber W1 More Personal Water Safety Products Lightweight, comfortable for wearing, hit-and-inflate airbag included as well as including a 2L freshwater container or emergency use. WHAT SHOULD YOU KNOW WHEN USING HAVOSPARK WATER RESCUE DEVICES AND SPORTS PRODUCTS? Some of Havospark products are designed for ultra performance on or under the water, which is particularly suitable for pro users with proficient skills in some fields, i.e. diving or foiling. In addition, there's some intrinsic hazards for water sports, it is therefore highly recommended the users read the provided user guides or manuals and obtain sufficient knowledge about that sport before putting the product in real use. If you have any doubts about the use of Havospark water rescue devices and sports products after purchase, do not hesitate to contact us through email or message box for consultation. WHAT ARE TIPS FOR WATER SAFETY? Do not swim/dive in wild or uncharted waters. Do not be panic during an emergency. Be aware of body conditions. Avoid overloaded boats/yachts.

Established in April 2016, Shenzhen Hoverstar Flight Technology Co., Ltd. is one of the national water rescue equipment suppliers dedicated to the R&D, manufacturing, and sales of water rescue equipment and water sports products. VENDOR HOVERSTAR Regular price Sold out Color: Ocean Blue Kids love excitement and spending time in the water. Swimming with board makes them healthier and learning how to swim makes them happier. That’s why you couldn’t get a better present for your child than Havospark Sharki, a motorized kickboard that has been designed to keep children entertained, happy and on their way to becoming great swimmers! The Kind of Speed and Thrill that Kids Love While conventional kickboards are exclusively powered by kicking and swimming, Havospark Sharki is an intelligent water entertainment toy with a motor that delivers a fast speed of around 1.5m/s in the water. Your kid will still get to kick and train swimming skills, but the thrill of the speed will make this experience far more exciting and memorable! Powerful Motor for Moments of Fun While it’s powerful, Havospark Sharki is also extremely safe and strong— making sure it’s entirely child-friendly. Operating it is very easy and safe: just press both starter switches to get it running and release any switch to make it stop. You just can’t go wrong with that! Also, the fens gaps are tight enough to make sure no young children’s fingers can accidentally be harmed. Keeping Tabs on Speed There’s no need to guess how fast it’s going—Havospark Sharki has a real- time LED display showing the speed mode (1m/s or 1.5m/s) and the remaining battery level that allows you or kid to conveniently control the speed and autonomy of the device at any given time. Ergonomic Design Comfort is a key aspect that any device should offer, and especially if children are using it. Our innovative swimming kickboard/kickboard swimming has an ergonomic design with intricate body curves that creates an experience of maximum comfort while it’s used while ensuring a steady and joyful ride while your kid is playing in the water. Fun Time is Family Time Havospark Sharki turns any moment in a swimming pool or on the beach into a great opportunity to have fun and great family time. As a parent, you’ll spend great quality time with your kids, in a truly engaging and original way! Waterproof and Sand-Proof Also in the safety and robustness chapter, Havospark Sharki also shines in two other ways: its patented technology ensures that its IP67 waterproof and sand- proof features cover all the switches, battery box and propellers to minimize any damage to the product or any kind of electric issue that could harm children. In fact, we have used a nitrogen mold to mold the whole body part of the device, which is hollow inside, so that this special kickboard for pool has greater buoyant force than any other competitors. Durable for Everlasting Memories Memories last forever, and so should the elements that help create them. Havospark Sharki is extremely robust and durable since its body is made of engineering plastics and high-elastic composites that offer impressive anti- collision and impact resistant features. Removable Lithium Battery Havospark Sharki Kickboard comes with a rechargeable 24V 35.2 (human safety voltage) lithium battery that allows the kickboard to work for 60 minutes underwater. You can recharge directly on the product or simply replace it with a spare battery for extended fun in the water. You decide! Safe on Flight Bring your Havospark Sharki on all your adventures! Havospark Sharki’s portable lithium battery is approved by the Federal Aviation Administration to take on board all flights. Adults Can Use it Too Since the buoyancy and power of Havospark Sharki Kickboard are quite strong, adults can also use this device—as long as you have no issues with using a motorized pool float with a baby shark design! :) If you want to know swimming kickboard price or buy kickboard, please contact us.

Established in April 2016, Shenzhen Hoverstar Flight Technology Co., Ltd. is one of the national water rescue equipment suppliers dedicated to the R&D, manufacturing, and sales of water rescue equipment and water sports products. Mini scuba tank review VENDOR HAVOSPARK Regular price $239.00 USD Title: 0.5L Dive Tank (single, no pump) Breathe Freely in the Water From now on, you can enjoy diving without bulky diving equipment. or you would like stay a few minutes longer, you may try the 1L tank Easy to Use Simply fill the mini diving scuba air tank with pressurized air via the air pump provided in the package or a conventional diving tank using the included adapter. Refill Method 1) via a high-pressure hand pump scuba tank Refill Method 2) with conventional mini scuba diving kit an adapter Respiratory Balance Regulator It has a built-in pressure gauge that shows air balance in real-time. The pressure gauge on the mini scuba tank cheap The pressure gauge on the mini scuba tank with pump Made of Aviation Aluminium This mini scuba air tank with pump uses standard portable diving equipment material which meets all manufacturing standards. SPECIFICATIONS Weight: about 1 kg / 28.4 oz Material: Aviation Aluminum + Silicone Length: 35cm Diameter: 5.9 cm Volume: 0.5 liter Capacity: 3.0 CU FT / 85 liters Maximum pressure: 3000 PSI / 200 BAR / 20MPA Number of surface breaths: about 170 (0.5 litres per breath) Surface treatment: hard oxidation and spraying. Resistance to seawater corrosion for 500 hours. Time for using: 8-10 minutes (depth 1-3 m) 6-8 minutes (3-7 m depth) 5-6 minutes (depth 7-10 m) PACKAGE CONTENTS Variant 1) 0.5L Mini Diving Scuba Air Tank (single, no pump included) - $239 0.5L Diving tank * 1 Cylinder head * 1 Adapter for Regular Sized Scuba tank * 1 Shoulder Bag * 1 Multifunctional wrench * 1 Allen key and o-ring Variant 2) 0.5L Mini Scuba Dive Tank Set (with pump) - $339 0.5L Diving tank * 1 Cylinder head * 1 Adapter for Regular Sized Scuba tank * 1 Shoulder Bag * 1 Allen key and o-ring High pressure air pump * 1 Dedicated Carrying Bag* 1 Variant 3) 1L Mini Scuba Dive Tank Set (with pump) - $439 1L Diving tank * 1 Cylinder head * 1 Adapter for Regular Sized Scuba tank * 1 Shoulder Bag * 1 Allen key and o-ring High pressure air pump * 1 Dedicated Carrying Bag* 1 Note: Import tax, VAT or duties are not included in these prices listed. If you want to know mini scuba tank price, please contact us.