dual zones sliding rotation tube furnace with vacuum pump

Dual zones sliding rotation tube furnace
This product is a double temperature zone slide tube furnace. There is a mixing
partition board in the middle of the furnace tube, which can mix the powder and
particles repeatedly with the rotation of the furnace tube. Through the mechanical
drive, the working pipe can rotate 360°continuously, so that the materials in the
tube can be mixed and heated evenly. The furnace body can slide back and forth on
the support to realize rapid temperature rise and fall.
Two way float flowmeter can be used to inject two kinds of gas into the pipeline;
high performance mechanical pump can quickly pump furnace tube to vacuum; through
the cooperation of pump and flowmeter, a variety of CVD processes can be
realized.The rotating device is very suitable for continuously wrapping and
modifying powder materials by CVD method in an atmosphere protected environment.

Technical Parameters
►Dual zones tube furnace
Model: CY-O1200-60IIT-R
Power: 3KW
Tube material: High purity quart
Tube diameter: 60mm
Tube length: 1600mm
Chamber length: 440mm
Heating zone length: 200mm+200mm
Working temperature: 0~1150℃
Limit temperature: 1200℃
Control accuracy: ±1℃
Temperature control mode: 30 or 50 segment program temperature control
Display mode: High definition full color LCD touch screen
Sealing mode: 304 stainless steel vacuum flange
Power supply: AC:110V 50/60Hz 2.5kW
Slide rail: 2030mm, sliding range 1500mm
Rotation speed: 0~20rpm

►Flowmeter
Model: CY-2F
Number of gas paths: 2 channels
Type: float flowmeter
Range: Route a: 0~160mL/min; route B: 0~100mL/min;Accuracy 4%
Pipeline pressure: Stainless steel pipe with pressure of 3Mpa
Flowmeter pressure: 1 standard atmospheric pressure
Pipeline interface: φ 8mm quick screw connector

►Vacuum system
Vacuum pump: Two stage rotary vane pump
Pumping speed: 1.1L/s
Suction connection: KF16
Pump limit vacuum: 10E-1Pa
power supply: AC110V 50/60Hz

Minimum Order: 1 sets

Click to Enlarge