Industrial Machinery & Equipment

Feature: 1. NCF roller feeder is suitable for material feeding with different thickness and length. 2. NCF roller feeder is suitable for high speed and long size feeding to improve productivity and feeding accuracy. 3. NCF roller feeder simple operation panel, with feeding length and feeding speed of the key number code, the operator can be arbitrary Settings, rapid and accurate, feeding length from 0.1mm - 9999.99mm.  4. NCF roller feeder adopts air pressure type relaxation (accurate relaxation point), which can be used for a long time with zero fault.  5. NCF roller feeder can be reformed into mechanical relaxation mode according to customer requirements NC. 6. NCF roller feeder with the best general performance of a model, free in the cylinder press and spring press replacement. Structure: 1. NCF roller feeder USES high quality, brushless servo motor drive, effectively shorten the feeding distance adjustment and testing time.  2. NCF roller feeder USES high sensitivity decoder, precise insemination and higher feeding accuracy.  3. NCF roller feeder with timing belt transmission, can eliminate gear gap, wear, no noise, no lubrication, safety and environmental protection. 4. Motor internal device can avoid damage during handling and loading and unloading. 5. NCF roller feeder 600 times under the best cost-effective feeder. ·Control panel 1. HMI adopts Taiwan screen pass 7-inch hd screen, with uniform color and The human-machine interface adopts Taiwan screen pass 7-inch hd screen, with uniform color and exquisite picture quality. It is applied in most industrial environments with high reliability, and supports serial port and network communication synchronously 2. The switch adopts sliding contact, has self-cleaning function, normally open and normally closed contact adopts separate bonding structure, can work with different poles, equipped with anti-rotation positioning and stop loose mounting gasket 3. It adopts self-compound flat button button, which is light and light in strength and moderate in key range. The contact of the modular structure is made of ketone compound point, which has strong conductivity and large carrying current, and has a life span of 1 million times.  • Operating handle 1. The electric control box is equipped with an operation box, which is convenient for personnel transposition operation, time-saving, waterproof and dustproof, high material strength, good electrical conductivity and long service life.  2. The electric control box is separately set with emergency stop button, which is safe and reliable, and can effectively reduce the opening and closing of the electric control box, and effectively protect the operation panel. · Feed roller, block wheel 1. The feeding roller adopts the galvanizing roller without power, which is formed in one, and the surface is scratch-resistant and wear-resisting mechanical bearing, which is flexible in rotation and durable 2. Hard chrome plating on feeding wheel, hard chrome hardening HRC60, strong locking force on locking handle, convenient locking, smooth rolling of roller  ·Feed cylinder Using genuine yade polite cylinder, alloy cylinder body, hard oxidation, riveting no leakage, solid aluminum CNC precision machining, inner wall grinding smooth, non-clamping, high efficiency, high strength operation, durable, suitable for all kinds of working conditions. ·Servo Motor Brands use yaskawa servo motor and drive (optional), improve equipment performance significantly, the maximum play to the device performance, problem solving, yaskawa motor original "no adjustment function" further deepen, without tedious tuning work, stable movement, can be used in harsh environment and energy saving, conform to safety standards, time limit for visualization. ·Transmission gear Gear processing process includes the following processes: gear hair cultivation processing - tooth surface processing - heat treatment - tooth surface fine grinding. Maopei parts are mainly forgings. Through normalizing treatment, the machining type of maopei parts is improved to facilitate cutting .According to the gear design drawings, rough machining, and then semi-finishing, turning, rolling, gear shaping, so that the basic gear shape; After the heat treatment to improve the mechanical properties. According to the design requirements of the drawings, the final finishing, finishing the benchmark, finishing the tooth profile. After the above treatment, our gear grade can reach grade 6, high wear resistance, high strength, long service life.

Cradle type decoiler cum straightener. In coil cradle instead of expandable mandrel the coil is placed on driven rollers with adjustable side plates for centering. The side plates are optionally provided with side rollers for prevention of damage in sides for delicate coils. Specification: Features 1、Material decoiler and straightener function together in one structure ,does not take up too much space. 2、Suitable for various of metal coils uncoiling and straightening . 3、It can adopt variable speed device , to control the discharge speed. 4、The material rack and straightener are integrated, chain drive, chrome plated roller, special endless speed change device controls the discharging speed, with strong durability. 5、The uncoiling adopts splint on both sides, driven by the feeding roller, which is pulled by leveling part to control the speed. 6、Leveling roller adopts chromium steel 40CR,after conditioning ,high frequency quenching ,hard chromium plating. Surface hardness HRC60 degree,chrome  plating thickness unilateral 0.05mm，high hardness, strong durability. 7、Leveling adjustment adopts four independent fine-tuning, which is controlled by scale, simple and practical. 8、Use L type iron frame induction frame induction,Mainly suitable for the material is lighter and smaller, the surface requirements are not high stamping production,It is often used with air feeder, with an economical punching automatic production line. Structure ·The head of straightener 1、The head adopts design of parallel roller, the upper 3 rollers/lower 4 rollers, totally 7 refined roller structure 2、Adopting four point fine adjustment ,which is more suitable for processing high-precision products. Four point independent pressure is used to adjust the pressure of feeding wheel for incoming and outgoing materials, which can effectively prevent deviation and deformation of materials. 3、Support roller adopts galvanizing roller without power, material integrated forming,surface resistance to scraping grinding, using mechanical bearings, rotating flexible and durable. 4、It adopts cost iron hand wheel , and its surface is electroplated, it is the most traditional hand wheel. 5、The transmission part is protected by protective cover on both sides, equipped with window for convenient observation.   ·Rack section 1、The equipment adopts decoiler and straightener combine together ,improve the utilization rate of the site. 2、The rack is designed with cantilever beam, and all the plates are cut by laser plasma, with high precision and good interchangeability. 3、All plates are cut by laser plasma with high precision. 4、The overall structure is simple, general technical workers can assemble and replace equipment parts, convenient and fast ,greatly reduce the maintenance cost. ·Straightener roller 1、The straightener wheel is made of solid bearing steel, thickened and electroplated after intermediate frequency, and the surface hardness is not low HRC58, to ensure the durability of material. 2、Forging round steel with GCr15, after preheating treatment( spheroidizing annealing),then turning , milling ,intermediate frequency treatment , rough grinding and cooling stabilization,then fine grinding ,finally electroplating ,maximize the gurantee of precision degree, concentricity, smoothness and hardness , extend the service life of straightener roller.     ·Drive gear The gear processing process includes the following process：gear blank processing-tooth surface processing-heat treatment-Tooth surface finishing. Raw parts are mainly forged parts，By normalizing treatment, improve its cutting, to facilitate cutting;according to the gear design drawings, rough machining, and then half fine processing ,lathe、rolling、gear shaping,make the gear basically formed;then by heat treatment to improve the mechanical properties. According to the design requirements of the drawings, the final finishing, finishing benchmark finishing the tooth type. After the above treatment, our gear grade can reach grade 6 , high wear resistance and strength high ,long service life. ·Power section 1 Adopt model 80 worm gear vertical reducer ,use the speed converter of gear , reduce the rotation number of motor to desired rotation number ,and get the mechanism with larger torque. 2、Adopt vertical motor, low vibration, low noise, fixed rotor part adopts pure copper coil, life is 10 times of ordinary coil, both ends are equipped with ball bearing ,low friction, low temperature. ·Electric control box 1、Adopt silver alloy relay ,full copper coil ,flame retardant safety base, long lasting and durable. 2、Adopt safety protection adjustment circuit time delay ,silver alloy contact ,various and dial, satisfied different delay ranges. 3、The switch adopts sliding contact ,with self-cleaning function , normally open and normally closed contact adopts separate bonding structure, can work with different poles, equipped with anti-rotation positioning and stop loose mounting gasket. 4、Adopt self-duplex flat button, the force is light, the key range is moderate, the building block type combination structure. The contact is made up of keto-base composite points with strong conductivity and large current, with a life span of up to 1 million times.

NCLF Series 3-in-1 Uncoiler, Straightener, and Feeder System Save Looping Space, Increase Safety Coiled material is from uncoiler through both left and right free guide rollers with advance photo sensors keeps looping. Through the opener device and bending roller system feeding the coiled material from up to down, passing opener device, coil tip flatness device, pinch rollers, work rollers, feed rollers to make the coiled material passing in an excellent smooth feeding Basic Information: The NCLF Series 3-in-1 coil feeder is designed for use with plate thicknesses up to 8.0mm. The standard model does not include a cart. The material rack is equipped with a powered pressure arm and pneumatic brakes. The system feeds material from the top with a pneumatic clutch and passive material discharge. The correcting roller has a diameter of φ110, and the feeding roller has a diameter of φ144. The system features worm gear adjustment and high-speed hydraulic cylinder relaxation. The control panel and machine frame are designed separately for ease of operation. The discharge line height is electrically adjustable. The standard feeding direction is left to right. Due to the material thickness, hydraulic expansion can be selected to reduce operational risks and improve efficiency. Applications: The NCLF Series 3-in-1 is ideally suited for the automotive parts and industrial products sectors. The equipment can be customized to meet non- standard specifications based on customer requirements. Advantages: 1. Maximized Space Utilization The NCLF Series has the highest space efficiency among 3-in-1 systems, providing superior safety and ease of use compared to other feeding machine models. 2. Flexible Integration The system can be integrated with other equipment to form a highly efficient production line, enhancing overall manufacturing efficiency. 3. Customization for Special Materials Tailored models can be designed to meet the specific needs of unique materials and products, ensuring optimal performance for specialized applications. STANDARD ACCESSORY: 1. Electric eye loop control system 2. Feed and straightener rolls hard chrome plated 3. Hold down arm device 4. Feeding line easily adjusted by advance worm gear screw jacks device 5. Uncoiler with inverter control 6. Pneumatic threading tables devices provided at uncoiler and straightener 7. Hand-set coil width guide at outlet side 8. Hand-wheel-adjusted coil width guides at straightener inlet side 9. Reference indicator adjuster 10. Coil tip flattener 11. Uncoiler with air disc brake 12. Coil keeper OPTION: 1. LIHAO’S coil car 2. Shearing device Features 1. Flexible Operation Mode All functions are centralized in the PLC and a portable knob, allowing operators to control the system from a single point, eliminating confusion and saving time. 2. High Efficiency and Safety The system replaces manual operations with mechanical actions, improving efficiency and reducing operator contact with materials, ensuring maximum safety. 3. onvenient Control Mode Users can easily switch between punch master or device master modes, adapting the system to their specific needs while saving operational costs. 4. Compact Design The NCLF series combines high power with an industry-leading compact design, making the most of your available workspace and reducing site costs. 5. Strong Control System Compatibility Featuring a full Mitsubishi control system, the NCLF series is compatible with both domestic and international standards, eliminating concerns about data conversion and simplifying operations. 6. Innovative Industrial Design The NCLF series is the first in the industry to integrate industrial design principles, maximizing equipment visibility and operator comfort without compromising performance. ·Material part Constructed from Q235B steel, the frame offers excellent strength, toughness, and weldability. The material is laser-cut to ensure flatness and CNC-machined for precision. The structure undergoes CO2 protection welding and annealing heat treatment to enhance the steel’s performance, eliminate defects from welding, and improve the overall mechanical properties, ensuring long-lasting durability.   ·Material spindle The spindle bore is precision-formed with a horizontal boring machine, guaranteeing coaxiality within 0.015mm. The main shaft is made from 40Mn tube forging, which undergoes spheroidizing annealing and quenching. This process enhances flexibility, shear capacity, and load-bearing strength, providing smoother coil operations and reducing motor strain. ·Left and Right Vertical Plates Made from ZG25 cast steel, these vertical plates offer high strength, stability, and welding performance. Through a series of processes including annealing and CNC processing, these plates ensure accuracy, stability, and long-term durability, preventing deformation and cracking.   ·Correcting Roller The core component of the 3-in-1 system, the correcting roller is made from GCr15 round steel. The roller undergoes multiple treatments, including pre-heat treatment, intermediate frequency treatment, and plating, to maximize concentricity, accuracy, hardness, and extend its lifespan. ·Gear Section The gears are manufactured using a multi-step process, including gear grinding, tooth surface processing, heat treatment, and surface finish grinding. This process ensures high wear resistance, strength, and precision, making the gears highly durable with a grade of 6 for extended service life.

Double Convex Lenses are used in image relay applications, or for imaging objects at close conjugates. Double Convex Lenses have positive focal lengths, along with two convex surfaces with equal radii. Aberrations will increase as the conjugate ratios increase. DCV Lenses are used in a range of industries or applications. Double convex lenses are optical components with both surfaces curved outward, designed to converge light rays to a specific focal point. Their geometry is essential for applications that require precise light focusing.These lenses are known for their ability to produce a sharp, clear image by converging light rays. They are fundamental in various optical systems, enhancing the quality and clarity of vision and imaging.

BK7 window has good performance over visible and near infrared wavelength region,is ideal for applications require minimal transmitted beam deviation. It is suitable for AR coating . Specifications of BK7 Optical Windows: Material: BK7 grade A optical glass Bevel:  <0.25mm X 45° Coating: Optional (Uncoated, AR, HR, PR, Coating, etc.)   Standard High Precision Dimension Tolerance +0.0/-0.1 +0.0/-0.02 Thickness Tolerance ±0.1 ±0.005 Surface quality: 60-40 10-5 Clear Aperture >85% >95% Flatness(per 25mm@633nm) λ /2 λ /10 Parallelism 3 min 3 sec

Wedge prism is an optical element with plane-inclined surfaces, usually the faces are inclined toward one another at a very small angles. It diverts light toward its thicker portion. Wedge prisms can be used as isolating components. Wedges may also be used to produce a small deviation which doesnt allow return to source. Specifications of Wedge Prisms: Material:  N-BK7 Grade A optical glass, Fused silica Dimensional tolerance: +/-0.1mm Surface quality: 60-40 Flatness: λ/4@632.8nm Wedge tolerance:  ±1 arcmin Bevel: Protective Coating: Optional

Ball Lenses are commonly used to improve signal quality in fiber coupling applications, or for use in endoscopy or bar code scanning applications. Ball Lenses feature short back focal lengths to minimize the distance needed from the Ball Lens to the optical fiber. Our Optics offers a variety of Ball Lenses in a range of substrates for performance in the ultraviolet to the NIR. Optical glass lenses Application Fiber coupling: Ball lenses efficiently couple light between fibers or from fibers to detectors, enhancing the efficiency of telecommunications and data transmission by precisely focusing and directing light. Laser alignment: They are used to collimate laser beams to ensure that the light travels along parallel paths, which is critical for laser scanning, measurement, and alignment systems.

Parameter 470nm Low Pass Filter CWL 470±10nm Peoduct size custom (Square of round) Transmission wavelength 350nm-460nm Optical density >OD2-OD6  Product material K9,BK7,B270,D263T Surface quality 60-40,40-20 The 470nm Low Pass Filter is designed to transmit light wavelengths shorter than 470nm while blocking longer wavelengths, ensuring excellent spectral separation and high transmission efficiency. This makes it an essential component in fluorescence imaging, spectroscopy, biomedical instruments, machine vision, and laser-based applications.

2.5 ton Battery Electric Locomotive for Mining Tunnel We are the original supplier of mining locomotive and its spareparts, we could provide you with the online visit of our factory! Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion- proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Total weight (t) : 2.5 Track gauge (mm) : 600,762 or 900 Traction (KN) : 2.55 Max. Traction (KN) : 6.13 Speed(km/h) : 4.54 Battery Voltage (V) : 48 Battery Capacity (Ah) : 330 Power (KW) : 3.5*1 Dimensions Length(mm) : 2360 Width(mm) : 914,1076 or 1214 Height(mm) : 1550 Wheelbase (mm) : 650 Wheel diameter (mm) : 460 Min Curve radius (m) : 5 Controller : Resistance or IGBT Braking method : Mechanical Brake Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Product Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions. Clients Feedback and Cases 1. A good feedback of our lithium battery locomotive from a client of Latin America 2. In order to solve the exist problems of lead-acid batteries. More than 30 lead-acid battery electric locomotives in this large mining were changed into lithium battery electric locomotives, which improved the work enthusiasm and production efficiency of employees, reduced costs,and more environment- friendly. 3. The mining rock drill car designed by Sunward Co., has a small size and simple structure, so the space for placing the lithium battery on the body is very limited. According to the limitation size, our company design a lithium power supply power plan, which perfectly solves the problem of lithium power supply space. In order to adapt to the special industrial and mining environment and improve transportation efficiency, a batch of 2.5-ton lithium battery electric locomotives are designed to Myanmar Clients. FAQ What's your product advantages? We have more 40 years experience in this field so that we could design or produce the locomotive as your requirement. We could also provide online service to teach you how to operate and maintain the locomotive. The most important thing that we produce the main part of the locomotive- The traction motors. we could guarante the power of the locomotive. Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants. Based on our customer's request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customer's plants.Necessary training about machine daily maintenance to local workers is provided also. Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. After Services: a. Our sales team will response for your question within 24 hours (Holiday is Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality

Minimum Order: 1 bags

We provide a complete end-to-end manufacturing process, covering material selection, precision forming, CNC machining, and post-processing such as anodizing, ensuring high-precision and professional metal manufacturing solutions. Our manufacturing solutions achieve lightweight design, high strength, high electrical conductivity, and excellent corrosion resistance. Our metal components are widely applied across aerospace, automotive, electronics, and medical industries. •Multi-axis CNC machining for high-precision metal components. •Stainless steel material machining and production. •Comprehensive multi-axis CNC machining services. •Suitable for automotive, aerospace, medical, and electronic precision parts. •Rapid prototyping and mass production services. •ROHS-compliant materials and RCA verification testing. For more product development details, please visit the factory Website: www.huntwave.com, Contact: service@huntwave.com

Minimum Order: 5000

Tempo Flexible Electric Pipe Heating Tape Medium 630 Watt Temp 400°C, Volt 230 Size - 25mm x 1800mm (TI-681-HIT-M6) The Tempo Heavy Insulated Pipe Heating Cable tape is an advanced solution designed for demanding Laboratory industrial environments. With a high watt density and capable of withstanding temperatures up to 400°C, it's tailored to meet the rigorous needs of sectors like water treatment, oil & gas, chemical & petrochemical processing, as well as pulp and paper packaging. This heating cable tape is engineered to provide efficient and reliable heat distribution along pipes, ensuring optimal temperature regulation even in harsh conditions. Its heavy insulation enhances safety and prevents heat loss, contributing to energy efficiency. Ideal for various pipe diameters and configurations, this product offers versatility in application. Whether it's maintaining process temperatures, preventing freezing, or ensuring product flow consistency, the Tempo Heavy Insulated Pipe Heating Cable tape delivers dependable performance, contributing to operational efficiency and reliability in industrial settings.

Minimum Order: 1 bags

Tempo Flexible Electric Pipe Heating Tape High 310 Watt Temp 400°C, Volt 230 Size - 25mm x 600mm (TI-681-HIT-H2) The Tempo Heavy Insulated Pipe Heating Cable tape is an advanced solution designed for demanding industrial environments. With a high watt density and capable of withstanding temperatures up to 400°C, it's tailored to meet the rigorous needs of sectors like water treatment, oil & gas, chemical & petrochemical processing, as well as pulp and paper packaging. This heating cable tape is engineered to provide efficient and reliable heat distribution along pipes, ensuring optimal temperature regulation even in harsh conditions. Its heavy insulation enhances safety and prevents heat loss, contributing to energy efficiency. Ideal for various pipe diameters and configurations, this product offers versatility in application. Whether it's maintaining process temperatures, preventing freezing, or ensuring product flow consistency, the Tempo Heavy Insulated Pipe Heating Cable tape delivers dependable performance, contributing to operational efficiency and reliability in industrial settings.

Minimum Order: 1 bags

Tempo Flexible Electric Pipe Heating Tape High 620 Watt Temp 400°C, Volt 230 Size - 25mm x 1200mm (TI-681-HIT-H4) The Tempo Heavy Insulated Pipe Heating Cable tape is an advanced solution designed for demanding industrial environments. With a high watt density and capable of withstanding temperatures up to 400°C, it's tailored to meet the rigorous needs of sectors like water treatment, oil & gas, chemical & petrochemical processing, as well as pulp and paper packaging. This heating cable tape is engineered to provide efficient and reliable heat distribution along pipes, ensuring optimal temperature regulation even in harsh conditions. Its heavy insulation enhances safety and prevents heat loss, contributing to energy efficiency. Ideal for various pipe diameters and configurations, this product offers versatility in application. Whether it's maintaining process temperatures, preventing freezing, or ensuring product flow consistency, the Tempo Heavy Insulated Pipe Heating Cable tape delivers dependable performance, contributing to operational efficiency and reliability in industrial settings.

Minimum Order: 1 bags

Tempo Flexible Electric Pipe Heating Tape High 930 Watt Temp 400°C, Volt 230 Size - 25mm x 1800mm (TI-681-HIT-H6) The Tempo Heavy Insulated Pipe Heating Cable tape is an advanced solution designed for demanding industrial environments. With a high watt density and capable of withstanding temperatures up to 400°C, it's tailored to meet the rigorous needs of sectors like water treatment, oil & gas, chemical & petrochemical processing, as well as pulp and paper packaging. This heating cable tape is engineered to provide efficient and reliable heat distribution along pipes, ensuring optimal temperature regulation even in harsh conditions. Its heavy insulation enhances safety and prevents heat loss, contributing to energy efficiency. Ideal for various pipe diameters and configurations, this product offers versatility in application. Whether it's maintaining process temperatures, preventing freezing, or ensuring product flow consistency, the Tempo Heavy Insulated Pipe Heating Cable tape delivers dependable performance, contributing to operational efficiency and reliability in industrial settings.

Minimum Order: 1 bags