Cable Manufacturing Equipment

LB-2.0T automatic feeding mute wire splice band machine. Special note: 1. Energy saving and low noise. 2. The mechanical shape design conforms to the CE standard and has high safety performance. 3. Digital debugging and feeding length, humanized operation interface is easy to understand, easy to learn and easy to use. 4. The rubber wheel is used to extrude and feed splice band harmless to ensure the machining accuracy of each wire, reduce the embossing of the wire insulation, and make the processed wire harness more perfect. 5. The mold design range is processed, and the riveting strength is enhanced. Technical parameters of equipment: Model: LB-2.0T Display mode: button screen. Form factor: 460*320*460mm. Press relay: 2.0T. Working power supply: AC220V 50HZ. Motor power:0.75KW Average power consumption: 0.02KW Feeding length parameter:1mm-99.9mm Available wire: Electronic wire, headphone wire, LED, etc.

Minimum Order: 1 bags

• This 1.8T wire splice band splicing machine is specially designed for wire riveting processing, crimping riveting and wire connection, which replaced the traditional soldering methods to avoid faults of no cold welding, air welding and air pollution.Splice band machine widely admitted to be the most simple and effective way. • This splice band wire crimping machine uses special continuous copper strip terminal materials to shape molding after being cut off. Pressing quickly at one time without waste and saving cost. • Splice band is processed by residue lines. Resistance to tension is particularly strong after riveting with stable quality. • Straight and curved mold bases can be equipped to connect with various products. • User-friendly design, easy to operate. Description: Scope of Application: • Neon and resistor connection, LED and wire connections. • Resistor and wire connection. • Slide switch and wire connection. • Connection of high temperature heating elements. • Connection of thermosensitive components (such as magnetic spring, constant temperature fuse). • Transformer tap and wire connection. Power supply: AC110V/220V 50Hz Weight: 55 Kg Dimension (mm): 370x 400×500 Power: 1/4HP Stroke: 2000KG Cooper Belt Size: 2mm/4mm/6mm

Minimum Order: 1 bags

Characteristics: 1. This machine is specially designed for cutting a series of rough pipes, such as bellows corrugated tube, silicon rubber pipe, rubber pipe, oil seal pipe, coffee pipe, medical tubing, gas pipe, water pipe and so on. It adopts caterpillar feeding control, with high precision and high speed. 2. The cutting device adopts the design of art knife, the cut is flat, blade cost is low, and the replacement is simple and convenient. 3. Feeding by steppingmotor,whichhas the characteristics of stable feedingand accurate length. The circuit adopts high-precision single chip integrated control, simple operation and stable control. The screen adopts touch-screen color screen to display all kinds of data at a glance. Technical Parameters: Model No. HWN-86A Voltage AC220V Power 560W N.W./G.W: 66/84KG Cutting Speed 60-210 cuts per minute Cutting Accuracy +/- 0.1mm Cutting Length 0.1-99999.9mm Cutting Diameter Max 38mm Dimension (LxWxH) 650x480x420mm

Minimum Order: 1 bags

This single granule terminal crimping machine(benchtop crimping press) adopts high-tech inverter technology, electronic precision positioning, avoids traditional terminal crimping machine clutch electromagnet common failure. Description： Power saving environmental protection, motor runs when machine is working. Machine mould continuum, no need to change mould, quick save time. Voltage stability, speed, high accuracy. Suitable for crimping computer terminal, DC terminal, single grain terminal, joint terminal. Light and handy structure, easy moving workplace, mute operation. Specifications Model No. LL-1.0T LL-1.5T LL-2.0T LL-3.0T LL-4.0T MaxPressure 1 Ton 1.5Ton 2.0Ton 3.0Ton 4.0Ton Mold Type Fixed Mold OTP Mold,#2000 Mold, JST Mold etc Power Supply 220V/50Hz Air Pressure Full Electric, No need air compressor Power Rating 250W 550W 750W 1000W 1500W Net Weight 25KG 35KG 50KG 55KG 75KG Size (MM) 250x210x460 280x250x600 320x280x650 320x280x660 350x320x720

Minimum Order: 1 bags

This semi-automatic h05vv-f stripper crimper machine is mainly used for: USB data cable, power cable, earphone cable, audio cable, stripping and crimping several core wires completed at one time, scrap insulations will be blown away by compressed air to ensure crimping depth 100% consistent. Use advanced CPU to control the precision of each action and improve the working efficiency. 1. Mainly used for: USB data cable, power cable, earphone cable, audio cable, stripping and crimping several core wires completed at one time, scrap insulations will be blown away by compressed air to ensure crimping depth 100% consistent. Use advanced CPU to control the precision of each action and improve the working efficiency. 2. High speed: 0.2 seconds crimping speed each time improves the working efficiency. 3. Mute: Step on the pedal and the motor works. Don’t step on it, it won’t work. Therefore, the noise generated by the rotation of the motor and the huge noise generated by the mechanical clutch and electromagnetic collision are eliminated. 4. Intelligent control, which accurately realizes basic functions such as wide speed regulation and precise positioning, and increases the number of workers leaving their posts, the processor automatically cuts off the power supply, and switches lighting and other intelligent management. 5. Energy saving: It saves the energy consumption to the greatest extent as 10x240W=25W/HRS. This machine is 40000×0.2(s/pcs)/3600x2500w=0.556kw/hrs. Compared with the two, the single machine and single shift can save energy nearly 2KW . 6. Long-term maintenance-free: Use electrical control instead of mechanical clutch or electromagnetic clutch, which effectively eliminates the hard contact between machines and reduces wear. In addition, all transmission parts have been treated with hydrogen permeation, which increases the strength and wear resistance. The compact reducer and motor are used as the main power source. Size: 300x280x450mm Crimping force: 2ton Stroke: 30mm Weight: 85KG Power Source: AC220V 50Hz Power: 750W Safety device: Top dead center sensor

Minimum Order: 1 bags

This FEK-30J pneumatic ferrule crimper for ferrules from 0.25 to 35 sqmm powered by air compressor can crimp different terminals with easy changing different crimping die sets, portable, productive and easy operation. • Multiple purpose,it can crimp different terminals with different crimping die sets. • The common type or pressure protected type foot switches are for selection. • This machineis equipped with pressure regulator to ensure precise crimping. • Light, portable,easy and quick crimping to ensure high efficiency operation. • This new style pneumatic ferrule crimpercan crimp about 1200 times per hours. Parameters: Model No.: FEK-30J Net weight: 4.8KG Output: 2.0T Air pressure scope:0.5-0.7MPa Dimension:286x125x165mm

Minimum Order: 1 bags

Automatic wire threading stripping ferrule crimping machine crimping tubular terminals is mainly aimed at international standards, this replacement of terminals is convenient and fast by means of vibrating disc feeding. the complex process can be simplified, and the overall efficiency is 3-4 times as high as the original, which has a greater cost advantage; the trumpet shape is adopted in the line extension part to make threading convenient. It adopts sensitive pneumatic induction control and quick crimping. Imported components, cylinder, stable performance. Parameter range: Suitable terminal specification: 6/8/10mm Length of peeling: 6-10mm Crimping range: 0.5-2.5mm (AWG13#-AWG21#) Pressing ability: 15KN Gas source: 0.5-0.7Mpa Power supply: AC 220V 50Hz Weight: 32kg Appearance size: 400*340*450mm Product characteristics: 1., simplification of complex processes can be achieved. The overall efficiency is 3-4 times the original cost, and has a larger cost advantage. 2. the terminals do not need to change the vibratory disc, changing the specifications of different terminals at once. 3. wear thread, peeling and pressing to finish at one time. 4. line deep part uses bell shaped shape to facilitate thread penetration. 5. the peeling line is automatically adjusted, and the height of crimping is automatically adjusted. 6., sensitive pneumatic control should be adopted to press the connection quickly.

Minimum Order: 1 bags

This Vibrator Bowl Insulated Crimp Ring Terminal Wire Terminating Machine, using high-tech frequency conversion technology, precise electronic positioning, when pressing, the motor working noise is smaller than the traditional terminal machine, and power saving, mode adjustment is more convenient and fast, to avoid common faults such as traditional terminal clutch, electromagnet and so on. 1. Adopt the latest intelligent digital voltage regulation and vibration feeding controller, and add PLC program. 2. Cylinder and die are used to feed at the same time, so that the feeding is more accurate, faster, better stability, and basically no stuffing phenomenon. 3. Improving the design of slope track, speeding up the transmission of terminals, the stuffing basically disappeared. 4. 2T ultra-silent wire crimping machine, no noise, safer employees, using card-type mold, easy to unload. 5. Using infrared control, when the track is full of terminals, the vibrating disc stops automatically. 6. Replacing expensive continuous terminals and adopting economical bulk terminals can save cost. 7. It is the best choice for small and medium-sized enterprises to replace singles electric small punches, improve the safety of workers and run at a speed comparable to that of connecting terminals. Power Source: AC220V/50Hz Power: Motor 250W / Vibrator bowl: 120W Net Weight: 130kg Dimension: 450x860x1360mm Crimping: 2Ton Slide Stroke: 30mm Crimping Frequency: 120times per hour Closure Height: 26mm Closure Height Adjust: 10mm Appropriate Terminal Type: Loose terminal Production: 7200pcs/hour

Minimum Order: 1 bags

This 12k crimps/hour 1.5T ribbon cable crimping machine can replace the OTP transverse die arbitrarily,simpler than the old model, fast debugging,output can reach 12000 pcs per hour. It adopts new NC debugging parameters and LCD display. It eliminates the steps of difficult mold adjusting, and has exquisite design,greatly reduces the labor intensity of workers, improves production efficiency and effectively controls the undesirable rate. Easy operation and free maintenance. Technical Parameter Size:260*300*780mm(L*W*H） Weight , :80KG Power Source: Single Phase 220VAC/ 50/60HZ,10A Display: Chinese/English (English refers to user manual) Total Power:550W Cylinder Pressure:0.4-0.7MPa（adjustable） Working Efficiency: 12000 crimps/hour（cauculated as 12Pins above ribbon cable) Appropriate Wire: 0.8-2.0mm,AWG20-28, Red Blue White FBC（2468）,Grey FBC（2651）,Color FBC and etc 2-40pins Cutting Length:>70mm Ribbon Cable Split Length: 30mm Crimping Strength: 1.5T

Minimum Order: 1 bags

1. This fully automatic AWG32-14 wire stripper terminator use true color touch screen,easy to operate,precise stepping motor and its driver,accurate and stable. 2. The parameters can be adjusted by setting the touch screen: whether the wire both ends are fully stripped or not, whether the wire both ends are partially stripped or not, whether the wire both ends are crimped or not. 3. Wire cutting length,wire stripping length and incision depth can be adjusted by touch screen. 4. The crimping device adopts universal mute terminal crimping machine with low noise and stable performance, it can carry transverse/direct applicator. Product name: Fully automatic double-ends single wire terminal crimping machine Wire size: 0.08-3.0mm2 (AWG#32-14) Production: both-ends crimping: 4500 bars per hour (decided by different wire cutting length) Function: both-ends full stripping, both-ends partial stripping, both- ends terminal crimping Wire Cutting Length: 35-9999 mm Cutting Accuracy: 0.2 + (set cut-off length * 0.002) Wire Stripping Length: Wire front stripping: 1.00-15.00/25.00 mm; Wire tail stripping: 1.00-8.00 mm Detection device: Wire detection, wire knotting detection, improper crimping detection, etc. Power Source: Single phase: AC220V 20A

Minimum Order: 1 bags

This rotary coaxial cable stripping machine is mainly used for processing coaxial cable and special single wire, using the most advanced rotating turret, to improve the accuracy and speed. Use of specific tools and rotary axis positioning device, and can strip up to 9 layers without changing the blade corresponds to the processing of various sizes and sheath wire, and is equipped with freely set controller modular, digital display cutting diameter. Device Name: 4806 Rotary Coaxial Cable Stripping Machine Technical parameters: Max cable diameter: 0.81-up to6.99 mm Cutting Unit Depth: 0.01mm Stripping Length: 48mm Stripping layers: 9 Drive mode: motor / ball screw drive (imported from Japan) Display: Touchscreen Blade: 2, Material: tungsten steel imports Switzerland Centering sheet: 2, Material: tungsten steel imports Clamp means: self-aligning, motor drive, the clamping force control program Productivity: 500-700pcs / h (depending on the cable type and length dependent) Open: Manual / Sensor Power: 220V / 50HZ Power: 250W Net Weight: 25KG Dimensions: 525X186X278 mm

Minimum Order: 1 bags

This pneumatic multi conductor cable jacket stripping machine, a specialized wire stripper on jacket of multi conductor cable, such as, AC/DC cable, computer cord, power cord and etc. Specifications Model No. LL-305 LL-310 LL-315 LL-330 LL-416 LL-520 Stroke 50mm 100mm 150mm 330mm 150mm 500mm Stripping (Diameter) Max 7mm Max 12mm Max 18mm Max 20mm Max 25mm Max 40mm Power Voltage AC 110V/220V/60Hz/20Hz Air Pressure 3-7KG/CM2 Force 31-73kg 49-115kg 84-196kg 84-196kg 165-300kg 400kg Net.Weight 20KG 25KG 35KG 65KG 45KG 102KG Size: mm 400x300x270 480x330x280 660x390x340 1100x550x450 615x425x375 900x700x600

Minimum Order: 1 bags

This pneumatic H05VV-F cable stripping machine is suitable for simultaneous peeling pvc outer sheath and pvc insulations of TTR multi conductor cable, such as, data cable, power cord and etc, more convenient for adjusting stripping length, comparing to manual cable peeling tool, it will save human labor and easy operation. Technical Parameters Mode LL-500 Power Supply 220V 50Hz Size 220x360x220mm Power 150W Jacket Stripping Capacity 3-10mm Core Wire Stripping Length 0-15mm Jacket Stripping Length 0-90mm Core Wire Stripping Capacity 1-8 PCS Air Pressure 4-7KG Weight 28KG

Minimum Order: 1 bags

This most advanced electronic product has more compact structure design, more wires can be processed, and higher precision. All debugging actions are completed in the LCD panel. The model of wire cutter and stripping machine efficiency is more than 30% faster than the traditional model. According to the requirements, the cutting speed can be adjusted (0-9 level) to complete the three sectors stripping requirements. Model No. HWN-220 HWN-220+T Dimension 450x450x360mm 450x720x360mm Net. Weight 40KG 60KG Cutting Length 0.1-9900mm (The shortest remaining insulation length in normal medium stripping is 35mm.) Stripping Length Front stripping: 0.1-30mm (depending on type of wire) Rear stripping: 0.1-50mm (depending on type of wire) Twisting Length Front stripping: 0.1-30mm (depending on type of wire) Rear stripping: 0.1-50mm (depending on type of wire) Wire Diameter AWG16-AWG32 Cutting Error 0.2mm+Lx0.2% Voltage AC 110V-220V (50/60Hz) Power Machine stop working:20W, max is 220W.

Minimum Order: 1 bags