Cable Manufacturing Equipment

This H05VV-F jacket core stripper cutter automatically cut and strip outer jacket and pvc insulations of h05vv-f 2/3/4/5 core cable, not hurt core copper wires,100 different programs can be saved for calling anytime. Easy operation, unmanned and good performance. Technical parameter： Model：SWT508-YHT2 Machine dimension：700mm×660mm×430mm Weight：85KG Power：850W Voltage：220V/110V 50/60HZ Operation interface：English/Chinese（Using 7 Inch Touch Screen） Processing outer diameter of round sheath line：3-10 mm Machinable core number：2cores, 3cores, 4cores, 5 cores Gas pressure：0.3-0.6Mpa Maximum diameter of conduit：Diameter 11 Peeling accuracy：±0.2mm Cutting length：Maximum 400m Stripping length of outer line：20-150mm Stripping length of core line:Front end 3-10MM，Rear end 3-30MM Material of cutting tools：4 pieces of knife are made of high speed steel. Productivity(200mm Length per unit)：650pcs/hour Drive system：8 rollers Electric machinery ball screw driver If your wire is flat sheathed cable, you can choose our fully automatic sheath cable wire stripping machine.

Minimum Order: 1 bags

This fully automatic nm cable stripper machine on submersible pump cable uses hybrid drive, SMC pneumatic components, microcomputer full LCD control system, with a wheel function to improve the length and stability of the stripping length. • ) nm cable: outer sheath and insulation of multi conductor cable can be one-time processing completed. • ) power cord: outer sheath can be stripped only. Model No. BJ-900 Function Wire cutting, both-ends stripping, middle stripping Applicable Wire Size 0.1-10 Sq.mm (AWG32-AWG10) Speed 1000-4000 pieces per hour (decided by wire) Wire Cutting 0.1-99999.9mm Stripping section 13 Wire Stripping Strip front: 0.1-250mm Strip tail:0.1-70mm Motor accuracy 0.1mm per step by mute stepper motor Function Automatic wire inlet/outlet, timing start Driven Mode 4 wheels Machine Size 420(L)mmx297(w)mmx345(H)mm Net Weight 28KGS Cutter Material Imported Tungsten Steel or High speed Steel

Minimum Order: 1 bags

This fully automatic 13awg-1/0awg (2.5-50sqmm) wire stripping machine uses a hybrid drive microcomputer control system of the whole LCD screen, in the processing range can be arbitrarily set the length of the cutting wire,stripping length,quantitive, time to start function,manufacturing for large square wire cable,especially for processing of the automotive,power distribution box (BV cable,BVR cable), can customize to process wire diameter 10mm/3/0gauge/80sqmm wire. Technical Paramters: Model No.: BJ-980 Function: Wire cut, both-ends strip, multi-step strip Cutting Wire Core: 2.5-50 sqmm (BV 25 sqmm, BVR 50 sqmm) Customize model can reach 80 sqmm. Production/Speed: 800-2000 pcs/hour Cutting Length: 0.1mm-99999.9mm Multi-step Strip: 13 steps Stripping Length: Strip front 0.1-200mm Strip rear 0.1-120mm Accuracy of inlet outlet motor: Mute Hybrid Stepping Motor 0.1mm per step Remark Function: Auto-outlet, Auto-inlet, Timing start Driving Mode: 8 wheels Dimension: 530X430x330mm Net weight: 45KG Blade material: Import tungsten steel/Highspeed steel

Minimum Order: 1 bags

This full or partial automatic wire stripping machine for stripping wire from 32AWG to 14AWG uses a hybrid drive microcomputer full LCD operating system, cutting, stripping, one time completion, but also the front half stripping with twisted wire, protect the integrity of the wire, special wire can instantly change the size of wire specifications. Model No. BJ-600 BJ-650 BJ-800 BJ-880 Main Function Cut wire,both-ends stripping Cut wire,both-ends stripping,intermediate strip, (wire twisting for BJ-880) Cutting wire core 0.1-4.0mm2 (30AWG-14AWG) 0.1-4.0mm2 (30AWG-14AWG)x2 0.1-2.0mm2 (32AWG-14AWG)x2 0.1-2.5mm2 (30AWG-14AWG)x2 Processing Speed(decided by wire material) 2000-8000 pcs/hour 4000-16000 pcs/hour 2000-8000 pcs/hour Cutting Length 0.1-9999.9mm No. Of Intermediate Stripping 0 13 Stripping Length Strip head: 1-30mm Strip tail: 0.1-15mm Strip head: 1-30mm Strip tail: 0.1-30mm Strip head: 1-50mm Strip tail: 0.1-30mm Strip head: 1-30mm Strip tail: 0.1-20mm Accuracy of outlet inlet motor Mute hybrid stepping motor 0.1mm per stepping Other functions Automatic wire inlet & outlet, timing Driving Mode 4 wheels Dimension(mm) 380x250x320 420x297x345 420x297x345 420x297x345 Net Weight 25 28 32 35 Blade Material Import Tungsten Steel/High speed steel

Minimum Order: 1 bags

This automatic flat ribbon cable strip cut split machine which is an fully automatic ribbon cable separator cutter stripper that cut & strip & split- to-length on ribbon cable, both-ends stripping, split ribbon cable into individual conductors, change parameters to split different length, no need to change conductor splitter, easy and unmanned operation. Mode BJ-900+T Function Flat ribbon cable cutting, both-ends stripping and splitting, intermediate stripping Applicable Wire Range 2-12 Pin/Way Flat Ribbon Cable Processing Speed 2000-4000 pieces per hour (decide by wire material) Cutting Length 0.1mm-99999.9mm Intermediate stripping nos. 13 strips Stripping Length Stripping wire head: 0.1-25mm Stripping wire tail:0.1-20mm Accuracy of entry & outlet wire motor Mute hybrid stepping motor 0.1mm per step Remark Function Auto-entry wire, Auto-outlet wire, timing start Driving Mode Six wheels driven Dimension 510X340X340MM Net Weight 40KG Cutter Material Import tungsten steel/Highspeed steel

Minimum Order: 1 bags

This fully automatic 27awg-2awg /0.1-35sqmm wire stripping machine uses a hybrid drive microcomputer control system of the whole LCD screen, in the processing range can be arbitrarily set the length of the cutting wire,stripping length,quantitive, time to start function,manufacturing for large square wire cable,especially for processing of the automotive,power distribution box (BV cable,BVR cable). Technical Parameters Model No.: BJ-900 Function: Wire cut, both-ends strip, multi-step Cutting Wire Core: 0.355-5.6mm/27awg-3awg/0.1-25 sqmm Cutting Wire Core: Up to BV 4.5mm/5awg/16sqmm Up to BVR 6.3mm/2awg/35sqmm Production/Speed: 1000-4000 pcs/hour (decided by wire type) Cutting Length: 0.1mm-99999.9mm Multi-step Strip: 13 steps Stripping Length: Strip front 0.1-50mm Strip rear 0.1-30mm Accuracy of inlet outlet motor: Mute Hybrid Stepping Motor 0.1mm per step Remark Function: Auto-outlet, Auto-inlet, Timing start Driving Mode: 4 wheels Dimension: 420X297x345MM Net weight: 35KG Blade material: Import tungsten steel/Highspeed steel

Minimum Order: 1 bags

This fully automatic wire cutting stripping bending machine uses hybrid drive microcomputer full LCD control system, for car wiring harness,electricity,power distribution box,battery box and other industries, cutting, stripping, dual direction 30 degree to 90 degree forming. Model No. BJ-900 (16 mm2) BJ-900 (25 mm2) BJ-900 (6 mm2) Function Wire cutting,stripping,bending Cutting Wire 0.1-16mm2 0.1-25mm2 0.1-6mm2 Production/Speed 200-800 pcs/hour (decided by wire) Cutting Length 0.1-99999.9mm Stripping Length Wire head:0.1-50mm Wire tail:0.1-20mm Wire head:0.1-30mm Wire tail:0.1-20mm Stepper Motor Accuracy Mute hybrid stepper motor 0.1mm per stepping Remark Function Automatic inlet wire, automatic outlet wire,timing start Driving Mode Four wheels driven Two wheels driven Machine Size (mm) 530(L)x420(W)x370(H) 420(L)x297(W)x345(H)

Minimum Order: 1 bags