Construction & Real Estate

The phenolic duct system is designed for high-risk environments. It uses closed-cell foaming technology to achieve ultra-low thermal conductivity (0.022W/m·K), which is 80% lighter than traditional metal ducts and meets Class A fire protection standards. The smooth inner wall design reduces wind resistance and is suitable for commercial buildings, laboratories and industrial exhaust systems. ​Attribute Category ​Attribute Item ​Attribute Value Example ​Basic Information Product Model SQ-PF-120 (FireSafe Phenolic Duct 120 kg/m³) Material Composition Phenolic resin + Glass fiber reinforcement layer + Flame retardant additives Color Standard gray / Custom colors (RAL color chart supported) ​Physical Properties Density 120 kg/m³ ±5% Thermal Conductivity ≤0.022 W/(m·K) Compressive Strength ≥0.15 MPa (ASTM D1621 standard) ​Fire Performance Fire Resistance Class Class A Non-combustible (GB 8624-2012 / ASTM E84 Class A) Smoke Density Rating ≤5 (GB/T 8627) ​Environmental Adaptability Operating Temperature Range −40°C ~ +150°C Corrosion Resistance Resists acids/alkalis, anti-mold (ASTM G154 certified) ​Installation Parameters Standard Length 3m / 6m (custom cutting supported) Connection Method Flange connection / Socket joint (compatible with ISO 13351 standard) ​Certifications & Compliance International Certifications CE / UL 723 / RoHS

Overview Double-layer & single-chamber PV module laminator has a double layer, loading stage, one heating laminating stage, and unloading stage. Equipment Configuration and Features of Double-layer & Single-chamber solar module laminator Control System Adopt Siemens PLC control system It integrates automatic/semi-automatic/ manual three control modes. Fully automatic and manual loading， laminating， unloading switchable. Recording function of important system parameter characteristic curve (upper and lower vacuum degrees, table temperature). Segmented pressurization function, pressure speed adjustable. Adopt chain transmission structure for conveyor system, continuously loading/unloading of modules. The programmable controller can easily communicate with the computer and meet the requirements of modern industrial automation control. Loading and unloading stages are equipped with independent control buttons for easy loading and unloading； The loading platform is designed to be a step-by- step control mode, which can set a certain forward distance according to actual needs. That means, that each time the button is clicked, the modules go forward a certain distance automatically. Process parameters can be set, and various process parameters can be displayed in the same window. It can store a variety of process recipes for product selection. Automatically remembered process parameters that will not be lost after rebooting. Lamination count statistics function, which is easy to check the working times and production per shift, can also be used as a reference for equipment repair, maintenance and vulnerable parts replacement cycles. Basic Specification of Double-layer & Single-photovoltaic module laminator Item Spec Lamination : 2700mm×7400mm Open height : maintenance height 300mm/working height100mm Laminating Chamber Thickness : ≥30mm Heating Plate Thickness : ≥55mm Control Mode : Touch Screen Temperature Control : PID intelligent Control Heating Method : Oil heating Power : AC380V 50Hz 3-phase 5-wire Heating Mode : Oil Heating Power Supply : AC380V 50Hz 3-phase 5-wire Total Power : 215KW Running Power: 130KW Temperature Uniformity : ±2℃ Temperature Range : RT--180℃ Compressed Air Flow(max) : 1600/min Compressed Air Pressure : 0.6MPa—0.8MPa For more information about solar laminator price and buy thin film laminate solar panels, please feel free to contact us!

Minimum Order: 1 bags

GFS tanks are assembled on-site from specialized enamel steel plates, hoops, self-locking bolts, sealing glue, and other components. The steel plate raw material utilizes titanium alloy-specialized enamel hot-rolled plates developed in collaboration with leading domestic iron and steel enterprises, and it is shaped using fast and low-consumption on-site assembly technology. After high- temperature enameling at 820°-930°, the enamel glaze fuses with the surface of the steel plate, forming a solid and chemically inert inorganic coating with outstanding corrosion resistance. The enamel process is currently an advanced coating and corrosion protection technology in the steel tank market. Bolted Steel Anaerobic Digestion Tanks Advantages 1. Gas impermeable: It is suitable for the gas storage. Moreover, Gas membrane roof will be offer this biogas digester plant to make sure no gas leaking. 2. Wide range of capacity: capacities from 20m3 - 18000m3 are provided based on your request. 3. Wide range of color options Dark green , blue , white , red , and so on , Any color you want, we will make the the color for the biogas digester tank. 4. Easy Installation: The enamel bolted steel tank is very easy to install no need long construction period or big installation equipment.

Glass-fused-to-steel Tank refer to glass-lined storage tanks, also known as some GFS storage tanks. Glass is melted with steel to enhance its performance. Fusion is important because it is single steel, and it is the same for the environment. When the fusion of steel and glass is completed, the strength increases and the wear resistance decreases, as does the suitable pH value scaffold for alkaline solution. Such ponds are generally considered to be one of the important components of environmental technologies, such as anaerobic digestion tanks, wastewater treatment and fireproof storage. They are industrial water storage tanks. The glass fused on the stainless steel tank panel is coated with glass enamel inside and outside. The enamel has a strong, bright, smooth silicate coating. Advantages of our Sludge Storage Tank 1. Short construction period and low cost. 2. Excellent corrosion resistance, service life> 30 years. 3. Easy to install, no need for large-scale installation equipment or very skilled worker. 4. The tank volume can be expanded according to your requirements. 5. Removable, relocated and reinstalled. 6. Exquisite appearance, the color of the tank can be customized. 7. Modular operation, on-site assembly. 8. Controllable quality, suitable for different climates.

GFS Fire water tanks have faster installation speed, more convenient and safer installation and excellent anti-corrosion performance. Hebei Wansheng specializes in manufacturing high-quality fire water tanks, including GFS bolted tanks, GLS glass lined steel tanks, and large-capacity custom tanks. Designed for industrial, commercial, and municipal fire protection systems, our tanks provide safe, reliable water storage with excellent corrosion resistance. Available in standard sizes or custom GFS tanks fully  to meet your project requirements, our fire water tanks ensure long-term performance and compliance with international standards. Features & Advantages Durable Material Our tanks are made from glass fused to steel (GFS) or glass lined steel (GLS), providing superior corrosion resistance, high durability, and long service life even in harsh environments. Flexible Capacity We offer standard tanks or fully customizable solutions, with capacities ranging from small-scale fire water tanks to large-capacity storage tanks up to 50,000 gallons or more.

GFS bolted tank is made of glass fused to steel plate, special sealing material, self-locking screw and other materials. The thickness of enamel steel plate can reach to 20 mm, the most used steel plate thickness is 3~10 mm, steel plate has surface oil, contain rust, contain oxide skin, after shot blasting, sand and other pretreatment process, the steel plate surface will be clean. After 900 ºChigh temperature second enamelingl in electric furnace ,0.3 mm enamel coating is applied on both sides of steel plate. strong binding force between enamel coating and steel plate. Enamel coating can not only prevent tank corrosion, but also has the function of strong acid and alkali resistance. And has extremely strong wear resistance.

GLASS FUSED TO STEEL TANK is assembled on-site from special enamel steel plates, stirrups, self-locking bolts, sealants and other accessories. The raw material of the steel plate is a titanium-containing enamel hot-rolled plate developed in cooperation with domestic first-tier steel companies, which is formed using fast and low-cost on-site assembly technology. After the enameled steel plate is fired at a high temperature of 820°-930°, the enamel will fuse with the surface of the steel plate to form a strong and chemically inert inorganic coating with excellent corrosion resistance. The enamel process is currently the most advanced coating anti-corrosion technology in the steel storage tank market. Bolted Steel Tank Advantages Short construction period, cost-effective tank solution Superior corrosion resistance, service life is more than 30 years Easy to install, no need for big installation equipment and/or very skilled labor, the quality is highly guaranteed. Tank volume can be easily expanded or can be dismantled, removed , and relocated Elegant appearance, tank color can be customized

Introduction: The characteristics of this high-altitude lifting platform are flexible, convenient and fast. You can use the scissor work platform instead of scaffolding to reach the height you need. Mobile aerial platform is suitable for continuous high-altitude operations in airport terminals, stations, docks, shopping malls, stadiums, residential properties, factories, mines and workshops.   GTJZ scissor aerial work platform characteristics (1)Security certification Conform to the EU EN280 standard and obtain CE certification.   (2)Walk when working at heights GTJZ mobile aerial lift has the function of automatic walking. It can walk fast and slowly under different working conditions. Only one person can operate the machine to continuously complete lifting, advancing, retreating, steering and other actions when working at heights. Compared with traditional hydraulic platforms, scissor platform lift greatly improves the working efficiency, reduces the number of operators and labor intensity.   (3)Security protection A level alarm is installed on the machine. When the vehicle inclines more than 3 degrees in all directions, elevating work platforms lift will automatically enter the protection system. Only the machine is allowed to descend, and can be used normally after it reaches a safe state. GTJZ scissor work platform is equipped with oil pipe explosion-proof system at each oil cylinder.   (4)Stepless speed change GTJZ mobile elevated platform only needs one person to operate, all actions are controlled by operating handle on the workbench, and the motor is infinitely variable. The service life of the battery and the motor is effectively extended, and the motor only consumes energy during operation. The walking hydraulic system adopts a closed variable pump control system, which effectively provides system efficiency. When the boom is in any position, the scissor work platform can walk safely; The walking speed decreases with the increase of lifting height.   (5)Control system ●The upper and lower consoles (ground console and platform console) are set, and the upper and lower consoles are switched by reversing switch. Lock the lower console when the upper control is used. ●The platform is equipped with a foot switch, which can only be operated by stepping down. ●The upper and lower consoles are equipped with emergency stop buttons, which can enable the operator to quickly cut off all actions and prevent the platform from continuing to move in case of unexpected operation.   (6)Disc brake system GTJZ EWP scissor lift adopts a hydraulic disc brake system. When the machine is stopped, the wheels are always in the braking state and can be reliably braked on a 6 degree slope.   (7)Extension platform The mobile boom lift can be moved out, expanding the scope of work and meeting the special needs of some users.   (8)Overload protection Mobile aerial lift from Felici has overload protection function, and has mandatory protection function for personnel unfamiliar with this equipment.   (9)Self diagnosis function With the self diagnosis function, the customer can quickly grasp the working state of the equipment and better maintain the equipment.   (10)Identification The identification is clear and the meaning is clear.   (11)Emergency device The hydraulic work platform is equipped with an emergency descent system.

Working Places: Outdoor Platform Height: 21-48m 68.9-157.48ft) Platform Width: 0.66-1m(2.17-2.3ft) Platform Capacity: 200-500kg(440.92-1102.31lb) Machine Weight: 1100-20000kg(2425.08-44092.45 lb) Power Type: Electric/Diesel engines Straight boom lift configurations • The telescopic boom and oil cylinder are provided with dust-proof sheath, which can effectively prevent dust from entering. • The smooth shape design makes it difficult for the boom and chassis to store sand and dust. • The long angle sensor can monitor the length and angle of the boom in real time. • The protection level of the electrical system is above IP65. The horizontal extension operation range of the machine is large, and self-propelled lifts can also continuously complete high-altitude operation within a certain range. • There are two and four wheel drive, two and four wheel steering configurations. Especially suitable for shipbuilding, ship repair, building construction, steel structure installation, bridge construction, etc.   Straight boom lift uses: GTBZ type hydraulic aerial work platform is used for up and down control and electric lifting. This aerial lifting platform is small, flexible, convenient and fast.  This series of hydraulic aerial platforms are widely used for lifting operations in municipal, electric power, street lamps, highways, docks, advertisements, gardens, residential property, factories, mining enterprises, workshops and other industries.

GTJZ self propelled scissor lift makes many difficult and dangerous jobs easier, such as indoor and outdoor cleaning (ceiling, curtain wall, glass window, eaves, awning, chimney, etc.), installation and maintenance of billboards, street lamps and traffic signs, etc. This high-altitude lifting platform is characterized by small, flexible, convenient and fast.   Self propelled scissor lift applications GTJZ self scissor type aerial work platform is controlled up and down and electrically lifted. This series of scissor lifts self propelled are widely used for lifting operations in municipal, electric power, street lamps, highways, docks, advertisements, gardens, residential property, factories, mining enterprises, workshops and other industries.   Self propelled scissor lift features (1)Security certification Conform to the EU EN280 standard and obtain CE certification.   (2)Walk when working at heights Self propelled electric scissor lift has the function of automatic walking. It can walk fast and slowly under different working conditions. Only one person can operate the machine to continuously complete lifting, advancing, retreating, steering and other actions when working at heights. Compared with traditional hydraulic work platforms, self propelled aerial lift greatly improves the working efficiency. It is especially suitable for continuous high-altitude operations in airport terminals, stations, docks, shopping malls, stadiums, residential properties, factories, mines and workshops.   (3)Security protection A level alarm is installed on the machine. When the vehicle inclines more than 3 degrees in all directions, the self propelled boom lift will automatically enter the protection system. Only the machine is allowed to descend, and can be used normally after it reaches a safe state. GTJZ type self propelled man lift is equipped with safety plate device at the lower part of the bottom car. As long as the platform is raised, the safety plates at both sides will be opened immediately to work, reducing the distance from the ground to avoid overturning accidents caused by uneven ground when walking high above the ground. GTJZ mobile aerial lift is equipped with oil pipe explosion-proof system at the oil cylinder.   (4)Stepless speed change Self propelled lifting platform from Felici only needs one person to operate, all actions are controlled by operating handle on the workbench, and the motor is infinitely variable. The service life of the battery and the motor is effectively extended, and the motor only consumes energy during operation.   (5)Large angle steering system Self propelled man lift is designed with large angle steering system, which makes the machine have excellent flexibility.   (6)Disc brake system GTJZ lifting platform adopts a hydraulic disc brake system. When the machine is stopped, the wheels are always in the braking state and can be reliably braked on a 6 degree slope.   (7)Intelligent charging system The tracked aerial platform is equipped with a fully automatic charger, which can automatically complete the whole charging process and automatically stop charging when the battery is fully charged.   (8)Extension platform The self propelled scissor lift can be moved out, expanding the scope of work and meeting the special needs of some users.   (9)Overload protection Self propelled electric scissor lift has overload protection function, and has mandatory protection function for personnel unfamiliar with this equipment.   (10)Self diagnosis function With the self diagnosis function, the customer can quickly grasp the working state of the equipment and better maintain the equipment.   (11)Green and environmental protection Because the machine uses DC battery power, the machine can be safe and quiet for indoor or outdoor work.   (12)Emergency device The self propelled lifts is equipped with an emergency descent system.

Working Places: Indoor, Outdoor Platform Height: 11-15m(36.9-49.21ft) Platform Width: 0.66-1m(2.17-2.3ft) Platform Capacity: 120-200kg(264.55-440.92lb) Machine Weight: 1100-20000kg(2425.08-44092.45 lb) Power Type: Electric/Diesel engines Product introduction: PSS type spider boom lift is a new product. The tracked aerial platform adopts imported maintenance-free battery as the power source, the spider bucket lift can adapt to the application of rough ground site, smooth driving; crawler walking, braking, climbing capacity of 36%; the boom part is two groups of parallel four-link linkage composed of linkage mechanism, collection volume compact, large elevation stroke; the central part is simple boom telescoping mechanism, increasing the operating range of the platform.   The spider boom lift is suitable for the venue high-level display, also suitable for the area or space narrow plant space operations; especially suitable for the airport terminal, station, dock, shopping malls, stadiums, community property, factories and mines workshop and other large range of continuous high-altitude operations.   Product use: PSS type self-propelled spider cherry picker is up and down control, electric lifting, this aerial work platform is characterized by small and flexible, convenient and quick, you can use a lifting platform instead of scaffolding to reach the height you need, solve your problems.   At the same time, spider boom lift for sale can also save your cost and valuable time. The spider aerial lift are widely used in municipalities, electric power, street lights, highways, docks, advertising, gardens, community property, factories and mining enterprises workshop and other industries range of lifting operations.

Attribute Working Places: Outdoor Platform Height: 11-15m(36.9-49.21ft), 16-20m(52.49-65.62ft) Platform Width: 0.66-1m(2.17-2.3ft) Platform Capacity: 200-500kg(440.92-1102.31lb) Machine Weight: 1100-20000kg(2425.08-44092.45 lb) Power Type: Electric Product Description Product introduction: GTQZ Self propelled Jib type Aerial Work Platform is a new product developed by our company. The Self Propelled Telescopic Boom Lifts uses the American Trojan large capacity lead-acid battery as the power source, which can adapt to the field application on rough ground and drive smoothly; Four wheel drive, braking, climbing capacity of 45%;   The boom part is a linkage mechanism composed of two groups of parallel four connecting rods, with compact collection volume and large lifting stroke; The middle part is a simple boom telescopic mechanism, which increases the operating range of the platform. Self propelled telescopic boom lifts is applicable to the high-level exhibition arrangement of the venue, as well as the space operation in the workshop with narrow area or space; aerial work platform is especially suitable for continuous high-altitude operations in airport terminals, stations, docks, shopping malls, stadiums, residential properties, factories, mines and workshops.   Self Propelled Telescopic Boom Lifts Applications GTQZ self propelled curved arm aerial work platform is used for up and down control and electric lifting. This self propelled aerial lifting platform is small, flexible, convenient and fast.  This series of telescopic aerial work platform are widely used for lifting operations in municipal, electric power, street lamps, highways, docks, advertisements, gardens, residential property, factories, mining enterprises, workshops and other industries.   Self Propelled Telescopic Boom Lifts Features 1. Robust Terrain Performance Telescopic boom lifts platforms feature strong climbing force and excellent traction, allowing them to drive efficiently on rough ground. This ensures reliable operation in diverse and challenging work environments. 2. Durable Telescopic Boom The telescopic boom is made from high-strength 8-angle alloy steel, minimizing welding deformation and optimizing rigidity and weight. This design enhances durability and stability, reducing main boom droop size for precise operation. 3. Advanced Control Systems Equipped with a proportional control operating system, working platform offers smooth and precise adjustments. The jib's upper and lower range spans 150 degrees, and the platform can hydraulically rotate 100 degrees, featuring an anti-skid floor and landing sight for safety. 4. Superior Hydraulic System Telescopic aerial platform boasts a large hydraulic cylinder capacity and continuous oil circulation for efficient performance. The system maintains good temperature control, and the program action function prevents tipping, ensuring vehicle stability. 5. Accurate Weighing and Control The patented weighing device accurately measures the platform's workload, unaffected by load position. Telescoping boom lift for sale also utilizes PLC and CAN bus controls with IP65-rated industrial controllers, ensuring reliable performance and easy maintenance. 6. Enhanced Safety Features The electronic leveling system ensures high accuracy, while the double spool hydraulic circuit prevents valve sticking accidents. An emergency power unit allows vehicle collection if the engine fails, and the anti-misoperation function protects critical components and automatically limits speeds when necessary.

This high-performance acrylic adhesive is specifically formulated for the interior installation of resilient flooring products, offering superior adhesion and ease of application. Designed for use on properly prepared interior substrates, this adhesive provides reliable, long-lasting performance for both residential and commercial flooring projects. Ideal for bonding: Vinyl Composition Tile (VCT) Vinyl Enhanced Tile (VET) Solid Vinyl Tile Luxury Vinyl Tile (LVT) Luxury Vinyl Plank (LVP) Key Features: Interior use only VOC compliant & low odor – safe for indoor environments High bond strength – ensures stable, durable installation High coverage – optimized for efficient usage Moisture resistant – suitable for various interior conditions Easy application – smooth troweling and cleanup

Minimum Order: 48

The Soft Stone Tianshan Rock series is inspired by natural slate, with a natural and smooth surface texture, rich texture and layered texture, showing the natural texture and texture of the original stone section. The color is calm and elegant, with the rugged atmosphere of natural rock and the delicacy and flexibility of flexible ceramic technology. Attribute Details Brand SOFTSTONEMASTER Model RSJ-TR/TS Origin China Type Artificial Nominal Size 600 × 1200 mm Available Size 1200 × 3000 mm Material MCM (Modified Clay Material) Texture / Finish Imitation of natural texture Surface Treatment 3D Print Thickness 3–4 mm Style Classic & Modern