Filters & Boilers

Turbine Oil Service is an extremely important and integral part of the performance of a turbine and the lubricant system. ASSEN has the professional research team to support your maintenance program to increase system efficiencies and decrease maintenance costs. TY turbine oil purifier is designed for purifying the waste turbine oil, especially the seriously emulsified turbine oil. This machine can fast and effectively remove the water, gas and impurities, aim at turbine oil’s nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil’s nature. Features: 1. The TY series integrate the gravity method, evaporation method, coacervation, vacuum separation and mechanical purification, utilizing coacervation, molecular absorption, vacuum drying and automatic demulsifying technologies which are capable of separating large and minimal amount of water from oil. Its high water removal and demulsifying efficiency makes turbid oil to be clear and limpid. 2. The precision multi-stage filter element can remove effectively various impurities, as it is a stage-to-stage densified filter element which could accommodate large amount of impurities and has a longer lifetime. 3. The advanced infrared level automatic control system, voice & light automatic alarm system and the pressure protection device ensure a safe and reliable operation. 4. Turbine oil and low viscosity lubricant oil can be treated online. 5. 8 models to satisfy different needs of flow rate. Key words turbine oil purify, turbine oil clean, lubricating oil clean, lubricating oil recycle, turbine oil recycle, turbine oil reuse, turbine oil treatment

Minimum Order: 1 bags

Application Transformer oil is a mineral based oil that is commonly used in transformers for its chemical properties and dielectric strength. This oil in your transformer acts as an insulator and a cooling medium. Over time, the oil will degrade resulting in the potential for faults and costly repairs. if you proper maintain the transformer oil, you can avoid any costly down time and expensive repairs. Our ZY Portable single stage vacuum transformer oil purifier is designed to remove the water, gas, and impurities in the waste transformer oil. After treatment, the oil can be used as new oil. Features 1. It is a portable and small size machine, which is easy to move. 2. The purifier can remove water, gas and impurities in oil with high efficiency to elevate the withstand capability and quality of oil, which ensures a safe operation of power generation equipment. 3. It equips the infrared liquid level automatic control device, system automatic pressure protector, high efficient water and gas removing components. it is easy operate and safe. Item Unit ZY-10 Flow Rate L/h 600 Vacuum Degree MPa -0.06 ～ -0.095 Working Pressure MPa ≤0.4 Temperature Range ℃ 20-80 Continuous Working H 720 Power Supply ∽50Hz 380V(or as needed) Working Noise dB(A) ≤75 Heating Power KW 11 Total Power KW 12.5 Inlet (outlet)Caliber mm 25 Weight Kg 230 Length mm 1050 Width mm 750 Height mm 1300

Minimum Order: 1 bags

Application Dissolved gasses in transformer oil can cause arcing, corona discharges, and overheating–reducing the electrical efficiency and lifetime of the transformer.So we need to clean used transformer oil.Assen ZYD-I transformer oil regeneration system is designed to completely regenerate insulating oils in de-energized transformers. Our machine provides regular oil purification and meanwhile, it can remove acidity, sludge, other soluble oil decay products and discoloration. Performance: In a single pass through the purifier at a full flow rate: Water Removal: From 50 ppm down to less than 5 ppm in a single pass & down to 3 ppm after two passes. (According to the PPM Tester) Gas Removal: From fully saturated with air (10% to 12% by volume) down to less than 0.1% by volume. Particulate Matter Removal: 98% of particles over 0.5mm or over 1 mm or over 5mm at customers preference. Dielectric Strength: Improve dielectric strength up to 75-80KV for New oil. Acid Removal: after treatment, the acid value will down to less than 0.1mgKOH/g Free Carbon Removal: there is no free carbon after treatment Oil Regeneration Machine's Technical Parameters Parameters Unit ZYD-I-30 ZYD-I-50 ZYD-I-100 ZYD-I-150 ZYD-I-200 ZYD-I-250 ZYD-I-300 Flow L/min 30 50 100 150 200 250 300 Working vacuum MPa 0.08 ～ 0.099 Working Pressure MPa ≤0.4 Temperature Range ℃ 20 ～ 80 Power   Three Phase 50HZ380V(as per the customer’s requirements) Working Noise dB（A） 75 75 75 80 80 80 80 Heating PowerkW 30 40 60 90 120 150 180 Total PowerkW 35.5 41.5 62.5 95.5 128.5 159.5 192 Inlet/Outletmm φ25 φ32 φ42 φ50 φ50 φ60 φ60 Weight kg 400 550 800 950 1100 1300 1600 Length mm 1350 1480 1850 1950 2100 2150 2250 Width mm 1320 1450 1810 1900 2000 2100 2200 Height mm 1350 1460 1860 1930 2150 2200 2300

Minimum Order: 1 bags

Application After years of operation, transformer oil get aging. transformer oil purification is a very important part of transformer maintenance.Assen ZYD vacuum transformer oil recycling machine, designs and builds the most effective, durable, and user-friendly Hi-Vacuum system on the market today.It is suitable for filtering new oil, imported oil and super HV transformer oil, particularly applicable to 110KV power distribution system and the national grid, shortening the oil treating duration during instalation and maintenance of transformer. Features: · Expectations on an effective oil plant for treatment of insulating oil:  · Low moisture content at plant outlet.  · Low gas/air content at plant outlet.  · Elimination of residual gas from the insulation.  · Drying of transformer insulation.  · Easy and failsafe operation.  · On-line measuring and recording of process parameters.  · Flexibility in application (various oil types and oil volumes)  Technical Data Parameters Unit ZYD-30 ZYD-50 ZYD-100 ZYD-150 ZYD-200 ZYD-250 ZYD-300 Flow L/min 30 50 100 150 200 250 300 Working vacuum MPa 0.08 ～ 0.099 Working Pressure MPa ≤0.3 Temperature Range ℃ 20 ～ 80 Power   Three Phase 50HZ380V(as per the customer's requirements) Working Noise dB（A） 75 75 75 80 80 80 80 Heating Power kW 30 30 45 60 75 90 120 Total Power kW 35.5 37.5 52.5 71.4 86.5 102.5 135 Inlet/Outlet mm φ25 φ32 φ42 φ50 φ50 φ60 φ60 Weight kg 600 800 1050 1400 1800 2000 2200 Length mm 1050 1100 1200 1450 1600 1800 1900 Width mm 750 800 950 950 1100 1200 1200 Height mm 1350 1400 1500 1650 1800 1900 1900

Minimum Order: 1 bags

Sino-NSH-TF-A is fully automatic unit developed based on NSH-TF ,realize the intelligence of the machine and simplify the operation. Sino-NSJH-TF-A utilizes the brand Programmable Logic Controller(P.L.C.)and a series of instrumentations,alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided as required. Several Pilot Lights are provided to indicate operational status of key components and alarm conditions. With full scale of on-line testers and detectors as option, Sino-NSH-TF-A could implement accessible and reliable solutions for unique request and practical usage. Like: Moisture content before and after Real-time flow rate, total volume Pressure value monitor Particle content online inspection Inlet and outlet oil temperature Running cycles All components state monitoring Filter blocking state

Minimum Order: 1 bags

Sino-NSH-TC is a complete oil purification system integrating vacuum oil purifier and centrifugal separator, widely used for the filtration and purification of turbine oil, as well as other lubricant oils. Sino-NSH-TC adopts vacuum and centrifugal technology, designed to meet the diverse needs of customers. It can effectively remove free water, dissolved water as well as emulsified water, reduce the water content to less than 100 PPM. Also remove the particulate contamination from oil with high precision centrifugal separator. Centrifugal separator is able to remove 99.995% of solid contaminants and 99.4% of water. Various capacities are available for this system, and some optional devices such as PLC Control system, Container structure etc.

Minimum Order: 1 bags

Sino-NSH-LV is a dehydration and degassing unit with thermal and vacuum processing. It is multifunctional purifier which can treat various kinds of lubricant oils. Sino-NSH-LV is mainly used to remove dissolved and free water , and particulate impurities effectively so as to increase special indexes of lubricant oil. Combining with vacuum system, the multi-stage filtration system adopts a high dehydration efficiency. It has a strong anti-emulsifying capability, which could separate the large amount of water from oil and the trace water from oil. The clearness of final oil can be under 6 NAS and water can be under 100PPM after processing with our machine. Sino-NSH-LV maintains an optimized structure and safe controls so as to meet comprehensive requirement of transformer manufacturers and service companies. Sino-NSH-LV maintains: -Hole user-friendly design -Four main security and protecting system to ensure safe operation -Adopting delamination gradual-close filtering technology -Online working -High efficiency, low noise -Environmentally friendly design -Low maintenance cost

Minimum Order: 1 bags

Sino-NSH-FV is a stainless steel machine with thermal and vacuum processing. Sino-NSH-FV is mainly used to improve the properties of phosphate ester fire- resistant oil in generator set. It can efficiently remove water, gas, impurities and oxide, meanwhile it can also reduce acid and improve the conductivity.Which is widely used in the field of electric power,chemical, paper and metallurgical industries which have steam turbine, gas turbine and hydro turbine. Sino-NSH-FV adopts advanced hydrophilic and hydrophobic principle, the equipment is dehydration, de-acidification, broke emulsion and high precious filtration.

Minimum Order: 1 bags

Sino-NSH-CP series is an oil purification system with thermal, filtering and centrifugal separation processing, with capacity from 1500 liter/hour to 6000 liter/hour. Sino-NSH-CP series is especially designed for the oil industry for the purification and recycling of liquid oil. This series is designed to overcome the harmful effects of oil contaminants, water and solid particles from fuel oil, lubricating oil and other mineral oil in marine engine unit and land generator unit of power station so as to reduce wear of diesel engine and other machine, and prolong the serving life. The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid. Sino-NSH-CP series model instruction: Mode Discharge mode Operation mode CP manual manual CPA Half-auto manual CPPA Full-auto auto Sino-NSH-CP series maintains: -Easy-handling control -High separation efficiency -Unattended operation available -Low consumption -Economic maintenance cost -High speed rotary machine, low vibration, safe and stable

Minimum Order: 1 bags

Sino-NSH-PF is a portable multi-stage high precision oil purification equipment. Sino-NSH-PF is mainly used to the negative mechanical impurities. Because of flexibility and portability, it is widely used in the fields of power station, petrochemical industry, metallurgy, mechanical engineering etc. For oil filling, oil pumping as well as high precision purifying and pipe cleaning.

Minimum Order: 1 bags

Sino-NSH-GER is regeneration system for waste engine oil including diesel engine oil, gasoline engine oil, as well as used hydraulic oil and some other machinery’s lubrication oils. Sino-NSH-GER is designed with the combination technology of physical and chemical processing, can effectively remove aging products and contaminants from used oil. Physical processing method can remove solid particles, water, gas etc. Chemical processing method allows removal of colloid, oxide, acid, pitch in the used oil. Specially, this system can restore the color of used oil and remove the scent rapidly. Sino-NSH-GER is an environmentally friendly system, abandon traditional acid processing method, effectively solve the environmental pollution caused by the old technology of waste oil recycling. Various options are available for this system to improve the automation of operation.

Minimum Order: 1 bags

Sino-NSH-GED-WB is designed to process and recycle waste oils, thereby to acquire high quality base oil. Sino-NSH-GED-WB adopts the advanced technology of vacuum distillation, can effectively remove wearing debris, pitches, waxes, impurities, water, carbon deposits, oxides from the waste oil, as well as decrease the acid. The base oil acquired is with high quality that can meet the standard and requirements for blending various industrial lubrication oils. During the distillation process, a powerful vacuum pump system provides a stable vacuum, the hydrocarbon chain breaks to reform new molecule of the oil, and turns into oil mist. Then it turns into liquid oil by effective condensation. Exhaust gas treatment device is equipped to ensure that emission gas strictly meets environmental requirements. Sino-NSH-GED-WB is the upgrade model of NSH-GER, saves operating costs and increase oil recovery rate, it can reach high rate above 90%. In addition, NSH- GED-WB has a wider range of applications, can be used to process almost all waste oils, such as engine oil, hydraulic oil, gear oil, etc. Both single oil or oil mixture can be processed and recycled by this system. Various capacities are available for this system to meet different needs of customers, and a variety of heating methods also allow customers to choose according to actual needs.

Sino-NSH-GED-WD is a waste oil regeneration system that cracks waste oil to diesel fuel. Sino-NSH-GED-WD adopts the atmospheric distillation technology, also known as cracking technology.During the distillation process, the waste oil is heated to the setting temperature and turns into oil mist, then it passes through the catalyst tower. After sufficient reaction with the catalyst, the oil mist passes through the condensing system to be control to liquid diesel. This system can be applied for gasoline motor oil, diesel motor oil, all kinds of engine oil, mineral oil, synthetic oil, transmission oil, hydraulic oil, gear oil and other used black lubricant oils to produce clean diesel oil. Diesel acquired from NSH-GED-WD system meets international standard and can be fully applied to burners, diesel engines, generators etc. This system is very safe because the temperature setting is rigorous and the machines is stabilization. Our technical team commits to design the most reasonable and high efficient distillation system to realize the profit maximization of the both parties. Recovery rate is above 90% with low operation cost, only 5-6 USD for recycling one ton used oil.

Minimum Order: 1 bags

Sino-VR is vacuum units create vacuum in transformers and other equipment. Sino-VR is a double-stage vacuum system. The first stage is a rotary-vane vacuum pump achieves 0.5mbar vacuum. And the second stage booster could achieves 0.0005mbar. Besides, vacuum gauge, controller, buff, etc to ensure the stable performance

Minimum Order: 1 bags