Industrial Machinery & Equipment

Product Introduction: 1.Neware pouch cell battery tester provides most applications in cylindrical cell and pouch cell capacity Testing.It based on charging discharging battery under different modes. It controlled by the Monitor Software installed at computer. Monitor software to edit testing program and BTSDA to analysis tested data. 2.Every unit pouch cell battery tester has 8 channels and could be installed Max.10 units on a rack make up 80 channels.Each of channel could work independently with different charge discharge program at same time. 3.Neware battery tester has constant current charge,constant voltage charge,constant current and voltage charge,constant power charge,constant current discharge,constant voltage discharge,constant power discharge,constant resistance discharge. 4.5V6A battery tester widely used in Pouch Cell Testing,Mobile Battery Testing,Cylindrical Cell Testing,Production Line Testing,Super-capacitor Testing and Lab Battery Materials Research. 5.The pouch cell battery tester is suitable for all kinds rechargeable batteries such as lithium battery, NI-MH battery, Zn-Mn watch battery and so on. Key Technology Parameters: Voltage Range:-5V~5V Lowest Discharge Voltage:1.5V Voltage Testing Precision:±0.05% Current Range 1:0.5mA~100mA; Current Range 2:100mA~3A; Current Range 3:3A~6A Current Testing Precision:±0.05% Primary Applications: Pouch Cell Testing Mobile Battery Testing Cylindrical Cell Testing Production Line Testing Super-capacitor Testing Lab Battery Materials Research Key Features: DCIR Testing Pulse Testing Capacity Testing Cycle Life Testing Testing Data Analysis Charge/Discharge Testing

Minimum Order: 1 bags

1.Neware BTS5V5A battery testing system provides most applications in cylindrical cell and pouch cell Testing,widely used in battery research institutes, universities and laboratories of battery,mobile battery manufactures.Many international great mobile manufacturers are using. 2.BTS5V5A have 2 channels,4 channels and 8 channels these three models.The testing precision is 0.02%FS for voltage and current,4 current testing ranges,100uS quick response time,1000Hz data recording frequency, and 400uS pulse width,it widely used on mobile batteries to do GSM testing, Electrochemical Research and Development. and could be installed Max.10 units on a rack make up 80 channels.Each of channel could work independently with different charge discharge program at same time. 3.Neware battery testing equipment has constant current charge,constant voltage charge,constant current and voltage charge,constant power charge,constant current discharge,constant voltage discharge,constant power discharge,constant resistance discharge. 4.The Neware battery testing system is suitable for all kinds rechargeable batteries such as lithium battery, NI-MH battery, Zn-Mn watch battery and so on. Key Technology Parameters: Voltage Range:-5V~5V Lowest Discharge Voltage:0.7V Voltage Testing Precision:±0.02% Multi-current Range: Range 1: 30nA - 150uA Range 2: 150uA - 5mA Range 3: 5mA - 150mA Range 4: 150mA - 5A Current Testing Precision:±0.02% Primary Applications: Button Cell Testing Mobile Battery Testing Cylindrical Cell Testing Super-capacitor Testing Half-cell Testing and Materials Research Electrochemical Research and Development Key Features: GSM Testing DCIR Testing HPPC Testing Capacity Testing Cycle Life Testing Testing Data Analysis

Minimum Order: 1 bags

Product Introduction: 1.Neware BTS5V12A battery testing equipment provides most applications in cylindrical cell and pouch cell capacity Testing.It based on charging discharging battery under different modes. It controlled by the Monitor Software installed at computer. Monitor software to edit testing program and BTSDA to analysis tested data. 2.Every unit BTS5V12A battery testing equipment has 8 channels and could be installed Max.10 units on a rack make up 80 channels.Each of channel could work independently with different charge discharge program at same time. 3.Neware battery testing equipment has constant current charge,constant voltage charge,constant current and voltage charge,constant power charge,constant current discharge,constant voltage discharge,constant power discharge,constant resistance discharge. 4.5V12A battery testing equipment widely used in Pouch Cell Testing,Mobile Battery Testing,Cylindrical Cell Testing,Production Line Testing,Super- capacitor Testing and Lab Battery Materials Research. 5.The Neware battery testing equipment is suitable for all kinds rechargeable batteries such as lithium battery, NI-MH battery, Zn-Mn watch battery and so on. Key Technology Parameters: Voltage Range:25mV~5V Lowest Discharge Voltage:1.5V Voltage Testing Precision:±0.05% Current Range 1:5mA~1A; Current Range 2:1A~6A; Current Range 3:6A~12A Current Testing Precision:±0.05% Primary Applications: Pouch Cell Testing 3C Batteries Testing Mobile Battery Testing Cylindrical Cell Testing Production Line Testing Super-capacitor Testing Lab Battery Materials Research Key Features: DCIR Testing Pulse Testing Capacity Testing Cycle Life Testing Testing Data Analysis Charge/Discharge Testing

Minimum Order: 1 bags

stationary portable hydraulic lift table pallet scissor lift platforms With CE: Application: - The pallet scissor lift platforms are convenient, efficient and safe ways to transport cargo from one floor to another. - Operation is easy. There are 3 sets control system installed on the scissor lift platforms, 1 control box below, 1 upper controller, and 2 remotes that can be operated beside work platform. Product parameters: 1) load capacity : 2000kgs 2) platform size : 2m x 1.5m 3) travel height : 4m 4) structure : high-strength Manganese steel 5) power : 380v/3ph/50hz/3.0kw 6) Installation : underground , into a pit Safety: 1) The scissor lift platform equipped with anti-skid plate to prevent slipping for safe. 2) The guardrails are equipped to guarante safety of the cargo. 3) The scissor lift platform has hydraulic overload protective organization to ensure the lift will not work when the load beyond its rated load capacity. 4) The scissor lift platform equipped single control solenoid valves to prevent the platform dropping if power failure. You can open the manual dropped valve to lower the platform to the home position. Factory pictures: Ce 2000kg Stationary Hydraulic Lift Table For Pallet Moving 0 Ce 2000kg Stationary Hydraulic Lift Table For Pallet Moving 1 Ce 2000kg Stationary Hydraulic Lift Table For Pallet Moving 2 Ce 2000kg Stationary Hydraulic Lift Table For Pallet Moving 3 The models we supplied for clients: MODEL LOAD CAPACITY PLATFORM SIZE LIFT HEIGHT PIT DEPTH POWER SJG0.3-2 0.3T 1.5m x 1.5m 2m 400mm 220V, 240V, 380V or 400V SJG0.5-3 0.5T 2m x 1.8m 3m 500mm 220V, 240V, 380V or 400V SJG2.5-5 2.5T 5.6m x 3m 5m 800mm 220V, 240V, 380V or 400V SJG3-2.5 3T 5m x 2.3m 2.5m 750mm 220V, 240V, 380V or 400V SJG3-3 3T 5.2m x 2.6m 3m 800mm 220V, 240V, 380V or 400V SJG3-3.5 3T 5.6m x 2.7m 3.5m 800mm 220V, 240V, 380V or 400V SJG5-10 5T 4.5m x 2.5m 10m 1150mm 220V, 240V, 380V or 400V SJG8-2.5 8T 6.5m x 4.5m 2.5m 850mm 220V, 240V, 380V or 400V SJG12-3 12T 5.5m x 2.8m 3m 950mm 220V, 240V, 380V or 400V SJG15-4.5 15T 8m x 2.2m 4.5m 1150mm 220V, 240V, 380V or 400V SJG20-5 20T 6m x 3m 5m 1200mm 220V, 240V, 380V or 400V The hydraulic scissor lift platform can be customized as your detailed size. The parts showing: stationary scissor lift1 The customers visiting: Ce 2000kg Stationary Hydraulic Lift Table For Pallet Moving 5 Our services: 1) The pallet scissor lift platform can be done as your request 2) Shipment can be arranged from our port to your destination port. 3) Operation video can be sent to you if needed. 4) English manual for car lift installation , using and maintenance. 5) 2 years warranty for whole machine without man-made faults. 6) We will send you parts for free with non-human factor faults during warranty time. 7) Supply 24-hours technical assistance by email, telephone or skype. 8) Engineers are available to your country if necessary.

FUCHUAN Normal Copper Wire Bunching Machine 34 Zones Adjudtable Winding Pitch Quick Details: Series for Model C normal wire high speed bunching machine and double twist bunching machine With high rotation speed, with constant tension from empty bobbin to full bobbin, with superior quality for twist wire, The machine is driven by synchronization strap. Only need to change the capstan wheel to change the pitch. Easy to operate. Characteristics: Japan Technology, product in China 1.High rotation speed, max up to 2600rpm, is the 1.6 times than normal (1600rpm); 2.Use PLC, hysteresis clutch take-up device imported from German, tension sensor ensure the stable tension and high quality stranding wire, especially for high quality tight line. 3.Use carbon fiber bow, strong rigidity, uneasy-transformation, small shock, light weight, reduce air friction for high quality of conductors; 4.Use synchronous belt drive, just to replace the guide wheel to change the lay distance, easy to operate. 5.Use spindle to calculate meters, only 0.01% error for a certain wire&cable. 6.Use PLC automatically lubricate spindle bearing, avoid injecting too much or too little grease. Get rid of unnormal noise and worn, cost down for maintenance. Specifications: Equipment models FC-650B-1 Twisting usage It is applied to the twisting of aerospace, medical equipment, cellphone and ultra conductor(above seven pcs of bare copper wires, tinned wires, silver jacketed wires and enameled wires),double twisting for core wires. Single wire dia(mm) φ0.15-φ1.04 Stranding section area (mm²) 0.35-6.0 Core wire single wire dia φ0.5-φ3.0 Core wire stranding outer dia φ1.0-φ6.0 Pitch(mm) 11.6-100(34zones) Direction of lay Optional for right or left Outer dia*bore*outer width φ630*φ56*475 φ630*φ127*475 M , ax rotating speed 2000(4000twist) Main motor power 7.5KW Inverter power 7.5KW Tension control method Touch screen +PLC+ magnetic powder clutch, it may ensure the constant tension from empty bobbin to full bobbin Magnetic powder clutch 5kgf Protection Machine will automatically brake when wire inside and outside is broken, the machine will automatically stop when the preset length is arrived. Brake mode Electromagnetic brake Traversing method Rolling ring drive units, winding pitch and breadth are adjustable Other Information FOB SHANGHAI Payment TT, L/C Delivery FOB Shanghai/Ningbo Origin China Minimum Order 1 set Package with container Normal Copper Wire Bunching Machine 34 Zones Adjudtable Winding Pitch 0 Normal Copper Wire Bunching Machine 34 Zones Adjudtable Winding Pitch 1Normal Copper Wire Bunching Machine 34 Zones Adjudtable Winding Pitch 2

The automatic carton erector is developed and produced for mass production line. The vertical production speed can reach 18 ctns/min. It can draw cartons and form it simultaneously, and the price is 50% lower than other vertical erector in the same level. This erector has been widely used in food, medicine, beverage, tobacco, daily chemical, electronics and other industries. An investment in an efficient carton /case / box erector can pay off in the long-term by increasing production while slashing labor costs. A box erector takes flat boxes loaded in a magazine, forms them into the proper box shape, seals the bottom of each box and produces an open box ready for you to put your product in.

L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel Our air actuated ball valve is a high quality control valve, which is used in many types of process control applications. These valves are used in the oil, gas, automotive, chemical, treatment, power processing, pharmaceutical, cosmetic, beverage, and food industries, just to name a few. These valves can be used manually, or if automation is required, they can come equipped with an ISO direct mounting pad cast on the top of the valve. The variations of design and material ensure that the correct performance standard can be met for any application. Our air actuated ball valve is a superior design to other types of valves due to its high performance standards. Some of the different design types include industrial, sanitary, three piece, flanged, double union, two piece, multi- port, grooved end, and high pressure. These ball valves are well suited to the many different ways that ball valves are utilized in today’s process control applications. Technical Data of Pneumatic Ball Valve: Pneumatic Ball Valve Electric Ball Valve Air Pressure: 0.4 to 0.8 MPa Electric Actuator Power: 380VAC, 220VAC, 110VAC (50/60Hz), 24VDC Electric Actuator Input: 4-20mA. DC Control Medium: Neutral Gas, Air Ambient Temperature: -20 to +60℃ Medium Temperature: -20 to +180℃ UPVC Ball Valve: -10 to +45℃ CPVC Ball Valve: -15 to +90℃ Normal Seal's Working Temperature: PTFE (-20 to +180℃), TFM (-30 to +230℃) Manufacturing Standard: GB, ISO, ANSI, BS, DIN Flow Direction of 3 Way Pneumatic Ball Valve: L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 0 Main Dimension of Pneumatic Ball Valve: L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 1 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 2 More Pneumatic Actuator Valves for you to choose: Pneumatic Ball Valves L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 3 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 4 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 5 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 6 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 7 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 8 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 9 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 10 Pneumatic Butterfly Valves L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 11 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 12 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 13 L T Pattern 3 Way Pneumatic Flanged Ball Valve Stainless Steel 14 Focus on your demands, Offer you best solution: √ Contact us if some points you have doubt √ Contact us if somewhere need to change √ Contact us if not the one you are looking for √ Contact us if you are doing designing Welcome to your any question and inquiry!

Water Cooling Type Three Lobe Roots Blower Bkw8024 , Durable Aeration Blower About BKW The screw blower may look similar to a roots blower, however, it functions differently. The roots blower acts like a pump for the air as it goes into the motor, whereas the screw blower is more like an air compressor in how it forces the atmosphere into the engine. BKW seires Roots Blower inherits most components from BK series, it adopts water cooling in bearing cover, which can reduce the temperature of bearing when working and prolong the longevity, also it has a larger pressure capability. Specifications: Mode , l BKW8024 Air capacity 22.74m3/Min-66.05m3/Min Discharge differential pressure 60-100KPA Rotary speed 700rpm-1500rpm Motor type 30KW-200KW 380/400/415/440V, 3PHASES, 50/60HZ Motor brand Standard: Siemens Beide or Wannan motor Siemens and ABB motor for your option Installation type Standard: horizontal type. Vertical type available for your option N.W. of blower without motor 1120 kg Packing size Approx. 2.35*1.65*2.60m (length*width*height) Features 1. Helical type timing gears for smooth operation 2. Compact, flexibility in installation gives users more choices. 3. Integral structure of impeller and shaft for stable and smooth running 4. Adopt imported oil seals made from fluoric rubber with high wear resistance and high-temperature resistance. 5. Low noise, low vibration and energy consumption. Parameters Type Port Dia Speed Inlet airflow(m3/min)and shaft power(KW)at different conditions Cooling Water 60kpa 70kpa 80kpa 90kpa 100kpa rpm m3/min KW m3/min KW m3/min KW m3/min KW m3/min KW L/min BKW8024 250(10'') 700 23.85 39.10 22.74 47.51 20 850 31.76 47.48 30.65 55.06 1000 39.67 55.86 38.56 64.78 37.67 73.70 1150 47.59 64.24 46.48 74.50 45.58 84.76 1250 52.86 69.82 51.75 80.98 50.86 92.13 1400 60.77 78.20 59.67 90.69 58.77 103.19 1500 66.05 83.78 64.94 97.17 64.05 110.56 Description of blower parts: Casing Made of Casting iron HT200 ENDLESS structure adopted for improving efficiency, one-time machined by CNC center with high precision Rotor (Shaft and impeller) Made of Casting iron QT500 The impeller and shaft is cast as an integral part. Adopting NC planer for machining to achieve high precision Gear end bearing Made of GCr15 NSK brand, double-row angular contact ball bearing, capable of supporting axial load Drive end bearing Made of GCr15 NSK brand, cylindrical roller bearing Gear Made of 20CrMnTi Bevel structure for more smoothly running Oil seal Made of fluoro rubber bears high temperature and has a longer life. Working Principle Roots blower is a cubage blower, and it discharges a fixed amount of air in proportion to its rotation speed. Every rotation, there is two lobes to finish three times absorbing and dischargeing air. Compared with two lobes blower, it is of less air pulses, smaller load change, higher strength, lower noise and vibration. Two paraller shafts have three lobes each, all the lobes keep small clearance with each other and housing inside. Every lobes rotatiomn, a certain air will be absorbed at inlet and transfeered form the housing inside surface to blower's diacharge port. Two shafts will be turned by the timing gears, no any touching between lobes, so it can be turned at high speed without any lubrication inside. It has the following chaaracteristics: simply configuration; running smoothly;good performance stabilization. It has been widely applied in various industries.

The desulfurization tower is a tower-type equipment for desulfurization treatment of industrial waste gas. The desulfurization tower was originally the most widely used granite masonry. It uses the principle of water film desulfurization and dust removal, also known as granite water film desulfurization and dust collector, or granite water film desulfurization and dust collector. The International Maritime Organization (IMO), according to the sulphur limit regulations for ships, requires member states to implement MEPC.259(68) from January 1, 2020, that is, the emission of sulfur oxides in the flue gas of ships must be less than 0.5%. In response to the new IMO regulations, ships basically meet emission standards in the following three ways: 1. Adding and using low-sulfur oil 2. Adopt desulfurization tower system (EGC system) 3. Use of liquefied natural gas (LNG) etc. as alternative energy For the third method, it is generally only applicable to newly built ships or operating ships with reserved refit positions. At present, the ship industry generally adopts the first and second methods to deal with the new regulations.

Minimum Order: 1 bags

Internal Automatic Calibration System Digital Analytical Balance Single Precision Mass Sensor The visual appearance of the product is blent into the simple concept,stylish and generous.Specially makes the fine pouring cast-aluminium outer covering,so a to the enhance the balance of the anti-static anti-jamming capacity.The panel with five operational button,sliding glass windscreen provide big space,insightful vision and operate easily.We use high precision magnet sensor to keep the weighing more fast and stable. Weighing application mode: 1.Percent weighing function 2.Density weighing direct reading function 3. Animal weighing function 4. Set object weighing and counting function 5. Cost settlement function 6. Check weight function 7.Wool / Net / Skin weighing function 8.Peak hold function 9. Cumulative function Application: Laboratory, Industrial, Education, Retail, Food, Jewelry and specialty market. Maximum weighing 310 g Minimum reading 0.001 g Repeatability ±0.002< , br>g Linear error ±0.003 g Stable time ≤3 s Weighing pan size Φ90 mm Operating temperature 17.0~25.5 ℃ Calibration method 6.5 kg Net weight External calibration

Product Highlights 1.Standard Operating Conditions 1-1 Rated Voltage:5V. 1-2 Direction of Rotation: CW when viewed from output shaft side 1-3Operating Temperature and Humidity:Temperature range of -10C~+50C,Humidity range of 30%~80%. 1-4Storage Temperature:Temperature range of -30C~+60C 2. Measuring Conditions: 2-1Motor Position:To be place t horizontally when measuring 2-2Power Supply: Regulated DC power supply --Fingerprint lock<optical instrument<office facilities etc; --Electric motor,low noise,low current and no spark. --Step angle:18degree/50/step Size :20MM Drive method :Unipolar Step angle:18 degree

Separately 650mm Manual Laminating Machine LBS650/LBS1000/LBS1300 Cold Laminator Description: 1. Easy to operate 2. Use friendly Specifications: Model LBS650 LBS1000 LBS1300 Max Laminating width 650mm 1000mm 1300mm Max Laminating thickness 5mm 5mm 5mm Dimension 810x215x360mm 1180x , 215x360 1470x220x390mm Diameter of the roller 65mm 72mm 80mm weight 13kg 23kg 45kg Functions lamination machine : 1. Chromed roller with high efficient heating 2. Variable speed control 3. Proportional temperature control 4. Dual functions for single and double side lamination 5. Under CE and ISO certification Company's long range development targets is: The accurate go along marketplace fixes position , chooses the high-quality product according with tidal current and fad and individuation , molds fine enterprise image! Provide ardent but thoughtful customer service, use reliable but the high-effect managing pattern fad is beautiful for the customer and the consumer create life brand-new experience that! Compete for wound of go along, field opening up vast cause, turn enterprise into the excellent enterprise scientize administration , material civilization being in motion and doing business , being modernized uniting with cultural and ideological progress altitude and developing with common progress of times!

Now heat semiconductor process fluids up to 210°C! Faster heatup: Single heater chamber sizes up to 18kW. Rapid installation: Customized plumbing connections Long heater life for reduced cost of ownership (COO): Patented heater gas purge system continuously removes any chemical permeation and ensures long element life. Long heater life and clean operating: Patented heater gas purge system continuously removes chemical permeation and ensures exceptionally long element life. This system also protects against any potential ionic contamination of the chemistry. Rugged construction: Thick walled chamber provides long service life in the harshest high temperature applications. Exceptionally clean performance: Thick fluoropolymersheath minimizes permeation. Element purge monitoring minimizes ionic contamination potential. Cleanroom assembly and testing ensures the highest manufacturing standards. Outstanding chemical compatibility: All fluoropolymerwetted parts compatible with virtually any chemistry. Excellent temperature stability: Low watt density design enables accurate control of process temperature.

We are Benteng Machine,the leader of the oil press  and oil press line,if you have need,please contact us any time,we will guarantee the best quality and service with the lowest price. 1Q:Does your oil press save electricity? A:Our oil press is energy - saving. Our production models that 3-5kg/h,8- 12kg/h,50-75kg/h,100-200kg/h,200-250 , kg/h,250-350kg/h,300-400kg/h,350- 500kg/h,500-6 , 00kg/h,700-1000kg/h. Different types of oil have different power,the voltage is 380v, but we can also design it to 220v,440v, and can design as your requirement. 2Q:Is the oil press good to operate? Does it save manpower? A:Our oil press only needs one person to operate, simple and convenient, saving labor.We have home use oil press, single screw oil press、automatic combined oil press and hydraulic oil press. Either way, it saves manpower 3Q:Is the oil press productive? A:Sure, our oil press has high oil yield,and the residue oil is ＜ 6.5%. 4Q:Do your oil presses have quality and technical guarantee? Is there after- sale service after purchase? A:Yes, our quality is at the top level, and the oil press can have one year for warranty after sale , we have professional engineers ,can offer online support service at any time. 5Q:What is the difference between single oil press and automatic combined oil press? A:Single oil press is just only an oil press,automatic combined oil press is oil press with two vacuum oil filters,it is applied to the latest technology, can press crude oil and filtrate oil at the same time, you can get the clean edible oil directly.Both the single oil press and automatic oil press can be used for various oilseeds with high oil yield,are very popularly among our clients.

Minimum Order: 1 bags