Insulation Material & Elements

High Strength Epoxy Resin Fiberglass Cross Knitting+ Pultrusion Insulation Tube was widely used for the live line tools and other insulation parts which need the better electrical performance and light weight. 1.Standard:GB13398, IEC 60855 2.Material:Fiber glass and epoxy resin. 3.Process:Continuous knittingfiberglass + pultrusion process

Minimum Order: 1 bags

High Strength Costomized Insulating Solid Rod is made of High strengh fiberglass glass reinforced epoxy resin with Polymer Reinforcement and Toughening Agent .We use continuous pultrusion with knitting fiberglass technology in manufacture procss .The strength is about 1.2 times than standard insulation rod.The products fullfill The standard of IEC61109, IEC 60855 and GB13398.

Minimum Order: 1 bags

UCC500-30GH70-IE2R2-V15 Ultrasonic sensor UCC6000-30GH70-IE2R2-V15 Ultrasonic sensor UMB800-18H40-E4-2M Ultrasonic sensor UMB800-18H40-E5-2M Ultrasonic sensor UMB800-18H40-E5-2M-Y Ultrasonic sensor UMB800-18H40-U-2M Ultrasonic sensor UMC3000-30H-E5-5M Ultrasonic sensor UMC3000-30H-I-5M Ultrasonic sensor UB1000-18GM75A-E5-V15 Ultrasonic sensor UB2000-30GM-H3-Y48481 Ultrasonic sensor UB250-F77-E0-V31 Ultrasonic direct detection sensor UB300-18GM40-E5-V1-Y287031 Ultrasonic sensor UB300-18GM40-I-V1-Y70147386 Ultrasonic sensor UB400-12GS-U-V1-Y70151686 Ultrasonic sensor UB800-18GM40-E5-V1-Y70113183 Ultrasonic sensor UB800-18GM40-E5-V1-Y70134323 Ultrasonic sensor UB800-18GM60-E5-V1-M Ultrasonic sensor

Minimum Order: 1 bags

Diamond Copper/Aluminum Series Copper/Kovar/Copper, Copper/Invar/Copper, and Copper/Steel/Copper series products are similar to CMC and CPC series sandwich composite materials. They combine the high thermal conductivity of copper with the low thermal expansion coefficient of Kovar, Invar, and steel. Although the thermal conductivity of Kovar, Invar, and steel is much lower than that of molybdenum and molybdenum-copper alloy, their prices are lower, and the yield rate of composite materials is higher. Therefore, the cost is much lower than that of CMC and CPC. According to literature reports,copper/Kovar/Copper,copper/Invar/Copper,an , d copper/Steel/Copper products are widely used internationally. We have developed these products for domestic research institutes and supplied them in small batches, but they have not been widely promoted.

Minimum Order: 10 long tons

Red insulation paper materials Red insulation paper is a soft composite material made of polyester film coated with adhesive and a two-layer insulation paper made of wood pulp insulation paper on one side. Insulation level: Class B; Temperature resistance: 130 ℃. Appearance: The surface is uniform, free from burrs, bubbles, wrinkles, and defects Usage: Red Kuaiba paper combines the excellent insulation performance of wood pulp insulation paper and the good dielectric strength of polyester film, widely used in electrical equipment, suitable for slot to slot insulation, turn to turn insulation, and pad insulation of B-class motors. Characteristics of Red Quick Bus Paper Products Red fast paper has insulation and anti-interference effects, high electrical insulation, mechanical strength, softness, and elasticity; Red fast paper is particularly resistant to acid and alkali corrosion, tear and wear resistance, insensitive to moisture, non-toxic and flame resistant. Red fast paper has strong inherent dielectric strength, mechanical toughness, flexibility and resilience, and good thermal stability. Factors Influencing the Performance of Red Quick Bus Paper 1. Insulation resistance and resistivity: The smaller the conductivity of a material, the greater its resistance, and the reciprocal relationship between the two. For red fast paper insulation materials, it is always hoped that the resistivity is as high as possible. 2. The relative dielectric constant and the tangent of the dielectric loss angle. 3. Breakdown voltage and electrical strength: Under a strong electric field, the insulation material of red fast bar paper undergoes damage, loses its insulation performance, and becomes conductive, which is called breakdown. The voltage at breakdown is called the breakdown voltage (dielectric strength). Electrical strength is the quotient of the voltage at which breakdown occurs under specified conditions and the distance between the two electrodes subjected to applied voltage, which is the breakdown voltage per unit thickness. For red fast paper insulation materials, the higher the breakdown voltage and electrical strength, the better. 4. Tensile strength: refers to the maximum tensile stress that a specimen can withstand in a tensile test. It is the most widely used and representative test for the mechanical properties of red fast paper insulation materials. 5. Flammability: Refers to the ability of red fast paper insulation materials to resist combustion when in contact with flames or to prevent further combustion when leaving flames. With the increasing application of red fast paper insulation materials, the requirements for their flammability become more important. People use various means to improve and enhance the flammability of red fast paper insulation materials. The higher the flammability, the better its safety. 6. Arc resistance: Under specified test conditions, the ability of red fast paper insulation material to withstand the arc action along its surface. During the test, AC high voltage small current is used to determine the arc resistance of the insulation material by the time required to form a conductive layer on the surface of the red fast paper insulation material through the arc action generated between the two electrodes under high voltage; The larger the time value, the better its arc resistance.

Minimum Order: 500

BVLF (Very Low Frequency) Testers are suitable for testing power cables, transformers, switchgear, rotating machinery and other electrical apparatus. The product combines modern advanced digital variable frequency technology and micro computer control together, therefore, it can realize the full automatic voltage boost, stepdown, measurement and protection as well as the manual intervention in the process of automatic voltage boost. The full electronic design ensures the small size and light weight. The big LCD screen ensures the clear and visual display, and can display the output sinusoidal wave form. The printer outputs test reports. In addition, the product has features as follows: Features Large touch screen：It adopts 7-inch touch screen and the latest ARM7 microcontroller. Advanced technology：Using digital frequency conversion technology, microcomputer control, step-up, step-down, measurement, protection and other testing processes are fully automated. Easy to operate：The wiring is simple and fool-proof operation. Comprehensive protection: Multiple protections (overvoltage protection, high and low voltage side overcurrent protection), rapidaction (action time ≤ 10ms), the instrument is safe and reliable. Safe and reliable：The controller and the high-voltage generator are connected with low voltage, photoelectric control, safe and reliable to use. High and low voltage closed loop circuit：High and low voltage closed-loop negative feedback control circuit is adopted, and the output has no capacity increase effect. Complete configuration：Capacitive touch screen, LCD Chinese character display, automatic storage, automatic printing. Large test range：0.1Hz,0.05Hz and 0.02Hz Multiple frequency selection, large test range. Small size and light weight：Very conducive to outdoor operations. Chinese-English switching function：Chinese-English switching, using imported high-voltage electronic switch to switch polarity. High-speed AD acquisition circuit, and equipped with USB background management software. Longer life and lower failure rate.

Minimum Order: 1 bags

30KV,50KV,80KV,90KV Ultra Low Frequency VLF Hipot Tester,high voltage gener https://www.alibaba.com/product-detail/30 , KV-50KV-80KV-90KV-Ultra- Low_1600101895358.html , ?spm=a2700.shop_index.86.2.7b4d7ffbwjFiJK 30KV, , 50KV,80KV,90KV Ultra Low Frequency VLF Hipot Tester,high voltage generator withstand tester Product Description BVLF (Very Low Frequency) Testers are suitable for testing power cables, transformers, switchgear, rotating machinery and other electrical apparatus. The product combines modern advanced digital variable frequency technology and micro computer control together, therefore, it can realize the full automatic voltage boost, stepdown, measurement and protection as well as the manual intervention in the process of automatic voltage boost. The full electronic design ensures the small size and light weight. The big LCD screen ensures the clear and visual display, and can display the output sinusoidal wave form. The printer outputs test reports. In addition, the product has features as follows: Features Large touch screen：It adopts 7-inch touch screen and the latest ARM7 microcontroller. Advanced technology：Using digital frequency conversion technology, microcomputer control, step-up, step-down, measurement, protection and other testing processes are fully automated. Easy to operate：The wiring is simple and fool-proof operation. Comprehensive protection: Multiple protections (overvoltage protection, high and low voltage side overcurrent protection), rapidaction (action time ≤ 10ms), the instrument is safe and reliable. Safe and reliable：The controller and the high-voltage generator are connected with low voltage, photoelectric control, safe and reliable to use. High and low voltage closed loop circuit：High and low voltage closed-loop negative feedback control circuit is adopted, and the output has no capacity increase effect. Complete configuration：Capacitive touch screen, LCD Chinese character display, automatic storage, automatic printing. Large test range：0.1Hz,0.05Hz and 0.02Hz Multiple frequency selection, large test range. Small size and light weight：Very conducive to outdoor operations. Chinese-English switching function：Chinese-English switching, using imported high-voltage electronic switch to switch polarity. High-speed AD acquisition circuit, and equipped with USB background management software. Longer life and lower failure rate. Output frequency：0.1Hz，0.05Hz，0.02Hz Load capacity： 0.1Hz max 1.1μF 0.05Hz max 2.2μF 0.02Hz max 5.5μF Measurement accuracy：3% Voltage positive and negative peak error：≤3% Voltage waveform distortion：≤5% Conditions of Use：indoor，outdoor； Temperature：-10℃- , +40℃ Humidity：≤85%RH Power：110KV-260 , KV(+-5%)

Minimum Order: 1 bags

New Original Warranty：1 year Module Number: 855-933-3223 Shaku Reference Hara Ruins:https://rockssautomation.com/collections/lam , - research/products/lam-research-855-933-3223-p , roline-pro-15fcat6sxo-gn- 1022133- semicondu , ctor , -network-cable Our best-selling products: MODEL 684-034757-001 833-073765 , -443 833-800999-214 833-800999-216 855-93 , 3-3223

Minimum Order: 1 bags

The company is spcialies in the production of polyimide series products. The main products include 6501 polyimide casting film and HF, FHF (polyimide-fluorine-46) composite film. Polyimide H- grade pressure-sensitive tape and H-grade polyimide glass lacquer cloth. It is an enterprise with a longer production history and a larger scale in the insulating material line in China. Its products sell well all over the country and are exported to Canada Australia, South Korea and other Southeast Asian countries and regions. It pays great attention to qualily control. it has advanced tchnology with perfecttest facility. The products are available in various specifications, which are not only applied to electric machinery, cable and electric appliance but to microelectronic and unclear industries. The polyimide insulating film poduced by the company has such advantages as good insulting property and sufficient lenght, which has ben well received by the users. Relying on its high-qualiy products and good reputation. the compay will face customers with new and allround service purpose. Thank very much all the customers for their support over the years and wish our cooperation and friendship everlasting.

Minimum Order: 10 long tons

The company is spcialies in the production of polyimide series products. The main products include 6501 polyimide casting film and HF, FHF (polyimide- fluorine-46) composite film. Polyimide H- grade pressure-sensitive tape and H-grade polyimide glass lacquer cloth. It is an enterprise with a longer production history and a larger scale in the insulating material line in China. Its products sell well all over the country and are exported to Canada Australia, South Korea and other Southeast Asian countries and regions. It pays great attention to qualily control. it has advanced tchnology with perfecttest facility. The products are available in various specifications, which are not only applied to electric machinery, cable and electric appliance but to microelectronic and unclear industries. The polyimide insulating film poduced by the company has such advantages as good insulting property and sufficient lenght, which has ben well received by the users. Relying on its high-qualiy products and good reputation. the compay will face customers with new and allround service purpose. Thank very much all the customers for their support over the years and wish our cooperation and friendship everlasting.

Minimum Order: 1 bags

Corrugated Polycarbonate Sheet Clear Plastic Roof Sheet for Greenhouse Introduction The product structure contains criss-crossed glass fiber reinforced materials, which greatly improves the impact resistance of the product, and is not easy to be broken under the impact of gravel and hail. Advantage 1. Corrosion resistance The product is resistant to various acids, alkalis and peroxides, and is especially suitable for coastal areas and corrosive places. 2. Use temperature It is a thermosetting polymer material. It is designed for normal use in the temperature range of -40°C to 120°C. 3. Thermal stability It is a thermoset glass fiber reinforced plastic. Its thermal expansion coefficient is 2.2 x 10-5mm/mm/°C, which is only twice that of metal materials. Because of this, when it is matched with the metal sheet, the displacement is relatively small, and it is not easy to leak. Product parameter Place of Origin China Model Number Customized Type Plastic roofing sheet Color Customized Type Customized Solid Polycarbonate Sheet Functional Light Transmission

PRODUCT DESCRIPTION CHN3-12Q/208 2500A 10kV Epoxy Resin Insulators Contactor Box Spout Bushings with KYN28-12 Switchgear​ We are specialty on epoxy resin medium voltage and high voltage components, such as 1. 10KV, 24 KV and 40.5KV Circuit Breaker , 2. Epoxy resin switchgear bushing , contactor box , insulators and transformer . 630A, 1250 A 3. 2500A , 3150A and 4000A contact box , club contact , fix contact, arm contact and jaw contact . 4. APG Craftwork , Casting resin Material come from moulds , the temperature is 170 degree in the moulds for shapping . 5. APG craftwork is more better than DMC craftwork . There is so beautiful and clean than DMC and BMC crfatwork . Item Technical data Rated voltage (KV) 3.6 7.2 12 24 40.5 Rated frequency(Hz) 50 Insulator(capacity) insulating Frequency withstand voltage 5 min (KV) 42 Frequency withstand voltage 1 min (V) Lighting impulse withstand voltage (KV) 75 Local discharge (pc) ≤10 Dispute bend (N) ≥1000 2500A 10kV Epoxy Resin Spout Insulator Contactor Box 0

Ceramic (Base, Socket, Cover, Tube) is used many fields, including insulation pole of home lighting and auto lighting lamps, heating lamps, filament lamps, discharge lamps, etc. The shape, design, size, color could be made according to the customer's request. Environmental protection product.

Minimum Order: 50000

The main parameters of our products are: ★ There are 6 kinds of conventional withstand voltage specifications of 250V, 500V, 630V, 1000V, 2000V, 3000V ★ The normal capacitance value range is 1pF～100nF, the higher the withstand voltage, the lower the capacitance value that can be achieved, so individual capacitance values cannot be achieved ★ Generally use NPO or X7R these two materials ★ High-voltage chip capacitor packages are relatively large, and the supplied package specifications are 0805, 1206, 1210, 1812, and 1825. Our chip capacitor products are mainly used in: 1. Power Products 2. Lighting equipment 3. Automotive Electronics 4. Equipment 5. Intelligent products 6. Network communication equipment 7. Instrumentation 8. Many fields such as automation equipment The core advantages of our supply of high-voltage chip capacitors: 1. Good reliability, suitable for high-end products 2. High voltage resistance and good breakdown resistance 3. Good temperature characteristics and strong stability

Minimum Order: 4000