Other Machinery

Model: COFW Series; Brand: Comair Working Power: 7.5-250 KW; Working Pressure: 7.0-10.0 Bar; Free Air Delivery: 1.0-43 m3/min Product Features ■ Stable and reliable air end, water lubricated, 100% oil-free, quality assurance. ■ IE3 motor, save your electricity cost, IP54, B-level temperature rise is suitable for harsh environments such as large dust and high temperature; ■ Coupling connection, more energy saving; ■ Multiple noise reduction design, calculated according to noise theory, with special flame retardant muffler cotton inside, to reduce the noise of the unit and provide a quieter use environment. ■ Multi-function intake valve group, start without load, motor load is small. Use high-efficiency filters to effectively filter particulates in the air; ■ Axial fan with tube-fin cooler has high wind pressure and low noise. It is exhausted upward through a specially designed air duct to prevent hot air from returning; ■ Modular design of water cooler, vertical installation, high heat exchange efficiency, stable operation and long service life; ■ Optimized shock absorption pad to reduce vibration and noise; ■ Routine maintenance parts adopt openable door panels, the installation position is easy to replace, and maintenance is more convenient. ■ Motor overload protection. ■ The pipeline system is designed according to the design pressure, and the reasonable pipeline is selected, the pipeline pressure loss is low, and the energy efficiency of the unit is improved ■ The use of 304 stainless steel pipes will not rust and corrode even under high temperature and humidity conditions, and the service life is longer ■ Separate design for cold and hot zone, no heat zone inside the unit, electrical components are in low temperature zone, longer service life ■ Dedicated control system, multi-channel pressure sensor and multi-channel temperature sensor to comprehensively detect the running state of the unit; the user interface is more friendly, the control is more accurate and reliable.

Model: CFL Series; Brand: Comair Working Power: 2.2-33 KW; Working Pressure: 8.0-10.0 Bar; Free Air Delivery: 0.21-3.72 m3/min Our Oil-Free Scroll Air Compressor is a compact and efficient solution for applications that require clean, dry air without the risk of contamination. Utilizing advanced scroll technology, this compressor delivers reliable performance, making it ideal for a wide range of industries, including healthcare, food and beverage, and electronics.   Oil Free Scroll Air Compressor Features The quality of compressed air is the key to users. Oil, oil mist, water, and particles are the three major factors affecting the quality of compressed air. ISO8573-1:2010 has made a strict definition of the quality standard of compressed air, especially the oil content standard of compressed air. We are fully aware of the importance of compressed air quality to users, and provide users with zero risk (zero risk of pollution, zero risk of damaged or unsafe products, zero risk of operational interruption) compressed air that meets the Class0 standard to help you compete Be successful. Oil-Free Design: Eliminates oil contamination, ensuring high-quality, pure air output suitable for sensitive applications. Low Noise Operation: Designed for quiet performance, making it perfect for environments where noise reduction is important, such as offices and medical facilities. Energy Efficient: Engineered to consume less power while providing consistent airflow, helping to reduce operational costs. Compact Size: Space-saving design allows for easy installation in tight areas, perfect for both industrial and commercial settings. Minimal Maintenance: With fewer moving parts and no oil changes required, maintenance is simple and cost-effective. Durable Construction: Built with high-quality materials for long-lasting reliability and performance, even in demanding conditions. Versatile Applications: Ideal for powering pneumatic tools, airbrushes, and medical equipment, as well as for use in laboratory settings. Integrated Controls: Features user-friendly controls for easy operation and monitoring of performance.

Oil Free Screw Air Compressor Model: CFW Series; Brand: Comair Working Power: 45-250 KW; 60-350 HP; Working Pressure: 2.5, 3.5, 7.0-10.0 Bar; 37, 51, 102-145 Psig Free Air Delivery: 244-1625cfm; 6.9-46 m3/min Our Oil-Free Screw Air Compressor, engineered for reliable, high-performance air compression without the need for oil lubrication. This innovative compressor is perfect for applications that require clean, dry air, making it ideal for industries such as food and beverage, pharmaceuticals, and electronics manufacturing.   Product Features ■ Industry-leading air end, imported brand, quality assurance. ■ IE3 motor, save your electricity cost, IP54, B-level temperature rise is suitable for harsh environments such as large dust and high temperature; ■ Coupling connection, more energy saving; ■ Multiple noise reduction design, calculated according to noise theory, with special flame retardant muffler cotton inside, to reduce the noise of the unit and provide a quieter environment for use. ■ Independent air inlet, reduce intake resistance, multi-function intake valve group, start without load, motor load is small. Use high-efficiency filters to effectively filter particulates in the air; ■ Centrifugal fan with plate-fin cooler has high wind pressure, low noise, external independent suction, exhaust air upward through a specially designed air duct to prevent hot air from returning; cooler modular design, vertical installation, effectively eliminate thermal stress, More stable operation and long service life; ■ Optimized shock absorption pad to reduce vibration and noise; ■ Routine maintenance parts adopt openable door panels, the installation position is easy to replace, and maintenance is more convenient ■ Oil Free Screw Air Compressor with Motor overload protection ■ The pipeline system is designed according to the design pressure, and the reasonable pipeline is selected, the pipeline pressure loss is low, and the energy efficiency of the unit is improved ■ All 304 stainless steel pipes are used, even under high temperature and high humidity conditions, it will not rust and corrode, and the service life is longer ■ Separate design for cold and hot zone, no heat zone inside the unit, electrical components are in low temperature zone, longer service life ■ Dedicated control system, multi-channel pressure sensor and multi-channel temperature sensor to comprehensively detect the running state of the unit; the user interface is more friendly, the control is more accurate and reliable. ■ The unit is equipped with an Internet of Things system, which can monitor the machine status on the mobile phone.

1. Automatic feeding with adjustable brackets 2. Speed is adjustable for different products 3. 100mm hole diameter for SKD11/DC53 thread rolling dies 4. Max. Rolling pressure is about 800KN 5. It is easy to operate and maintain the machine 6. CE, ISO9001-2008 Specification Working diameter 12-130mm Thread pitch 1.0-15mm Thread length In feed or Thru feed Spindle speed 16/21/27rpm (variable speed) Outside diameter of rolling die 220-300mm Inside diameter of rolling die 100mm Thickness of rolling die 250mm Feed stroke 0-20mm Mian motor 30KW Hydraulic motor 5.5KW Max rolling pressure 80T Supply voltage 380V 3P 50Hz Weight(reference) 7800(KG) Package Dimension(L*W*H) 2550*2250*2000mm Dimension(L*W*H) 2450*2150*1850mm Q1. Are you factory or trading company ? A1. We are factory of manufacturing thread rolling machine and dies by ourselves. Welcome to visit our factory, if possible. Q2. What is the delivery time ? A2. Usually 15-25 working days for machine, and 10-15 working days for dies. Q3. What is the warranty time for machine? A3. Usually 12 months from B/L date. Q4. What is the payment term? A4. T/T, Western Union, Money Gram, Alipay, PayPal. 50% as deposit, and 50% before shipping. Q5. Is it possible to design and produce automatic loading & unloading devices? A5. Yes, Engineer can design special auto feeding device according to your products. But please provide the drawing of your products before that. Q6. How will you solve problems that we face during using your machine? A6. A. Please provide necessary videos and pictures that can show the problems, our engineers will check and give corresponding solutions. B. Will arrange engineers to solve problems at the scene, if possible. WhatsApp&Phone: +86-13392185053 QQ: 3931526564 Wechat: fedacom16

This series of patented equipment developed by our company in cooperation with Central South University is mainly adopted to treat arsenic alkali slag, arsenic filter cake, and other arsenic contented materials from copper smelter,lead smelter and zinc smelters. The main process is: hydrometallurgy + pyrometallurgy combined to turn the arsenic-containing hazardous wastes into pure arsenic trioxide, and then reduced to metallic arsenic, metallic arsenic can be sold according to local market demand or rigid landfill disposal. The main patented equipment of this process, As2O3 purification furnace and arsenic reduction furnace, is widely praised for its high level of environmental protection, high level of automation, and large treatment capacity during industrial application. Arsenic Reduction Furnace is a type of industrial equipment used in metallurgical processes to remove or reduce the arsenic content in ores, concentrates, or other materials. Arsenic is commonly found in copper, lead, and zinc ores and can pose environmental and health hazards if not properly managed. The reduction furnace typically uses high temperatures and specific reducing agents (such as carbon or hydrogen) to convert arsenic compounds (often in the form of arsenic oxide) into more stable or less toxic forms that can be safely captured or neutralized. Key Components: Reactor Chamber: The primary area where the thermal reduction process occurs. Heat Source: Often electric or fuel-based, it provides the necessary temperature to initiate the reduction reactions. Reducing Agent: Materials like carbon, hydrogen, or other chemicals that assist in breaking down arsenic compounds. Scrubber or Filter System: Captures or neutralizes the arsenic gas or vapor produced during the process to prevent atmospheric release. Applications: Mining and Metallurgy: Commonly used in smelters where copper, lead, or zinc ores are processed, and arsenic is a byproduct. Environmental Management: Helps reduce the risk of arsenic contamination in the environment by stabilizing arsenic compounds.

The principle of fuming is a reduction and volatilization process, which is to blow air and pulverized coal into the slag in the fuming furnace, generate heat and carbon monoxide after combustion, keep the slag at high temperature, and make the compounds and free ZnO and PbO in the slag reduced to Zn and Pb vapors, the vapor will rise to the upper space of the furnace, meet CO2 or inhaled air and oxidize to zinc oxide and lead oxide again, and are collected in the state of soot. The four walls of the fuming furnace are all composed of water jackets. The lowermost water jacket on the side is provided with a tuyere. The inner wall of the water jacket is welded with Φ16mm and 50mm long pins, and the distance between the nails is 50mm, so that the condensed slag adheres to it and forms slag layer protects the water jacket and reduces heat loss. There is a slag outlet on the water jacket at the front end of the furnace. The lower layer of the water jacket and the inclined flue are water-cooled and circulated, and the upper layer of the water jacket is cooled by vaporization. The tuyere structure adopts a tuyere with a ball valve, and there are two branch pipes. The one near the water jacket is called the primary air coal pipe, and the one outside is the secondary air pipe. In order to prevent pulverized coal from escaping out of the furnace, the secondary air pressure is slightly higher than the primary air pressure (about 100mmHg). There are three air outlets on the upper part of the furnace, which is convenient for operation and observation, and can inhale air oxidized metal vapor.   Fuming Furnace Operational In order to achieve good results in the fuming process, the following conditions must be well controlled:temperature, fuel and air supply volume, slag composition, molten pool depth.   1. Temperature If the temperature is too high (such as exceeding 1350°C), iron deposits or Zn-Fe, Sn-Fe alloys may be formed, which is harmful to the fuming operation. If the temperature is too low, the reduction rate of metal oxides will slow down, the volatilization rate will decrease, the fluidity of the slag will deteriorate, and there may even be a danger of furnace formation, so the temperature in the fuming practice is kept in the range of 1150-1300 °C.   2. Fuel and air supply volume The most active factor affecting the volatilization rate in the fuming process is the air supply volume. Because the temperature in the furnace, the ratio of CO/CO2, the amount of gas, and the vapor pressure of the metal are all related to the air supply volume. The volume of the air supply depends on the pulverized coal consumption and the air utilization coefficient (α). The larger the air utilization coefficient, the higher the thermal effect of the fuel, the greater the partial pressure of CO2, and the higher the temperature in the furnace; the smaller the air utilization coefficient , the thermal effect is reduced, the partial pressure of CO becomes larger, and the reducing ability is enhanced. Pulverized coal is both a reducing agent and an exothermic agent in the fuming process, so the CO/CO2 should have an appropriate ratio during combustion. The air utilization factor actually adopted by the factory is variable. Usually, at the beginning of fuming, an air utilization factor close to 1.0 causes almost all carbon to be burned into CO2 to increase the temperature of the slag. In the reduction stage, adjust the air utilization factor to make carbon into CO as much as possible to improve the reduction ability. 3. Slag composition In practical the actual zinc content of the slag feed into the fuming furnace should be >6%. Below 4%, fuming treatment is uneconomical. Regarding the effect of slag composition on the volatilization rate of zinc, it can be summarized as follows: The increase of CaO content can increase the volatilization rate of zinc; The increase of FeO content in slag has little effect on ZnO activity; The content of SiO2 increases, and the volatilization rate of zinc decreases. Therefore, the silicic acidity of the slag is preferably in the range of 1.1 to 1.2.   4. Molten pool depth The thickness of the slag layer in production is generally in the range of 700- 1000mm above the tuyere area.

In order to realize the clean utilization of hazardous wastes with heavy metals and organic substances, RE TECH has developed a unique low-temperature pyrolysis technology for organic hazardous wastes, which can be widely used in the resource treatment and harmless recycling of waste enamel wires, waste circuit boards, waste tires, and waste lithium batteries with the core equipment of the steel belt-type low-temperature pyrolysis furnace. The technology adopts anaerobic pyrolysis to carry out comprehensive recovery, avoiding the production of a large number of hazardous substances generated by direct incineration, while at the same time, all the organic matter will be converted into reusable products, realizing the recycling of hazardous wastes, and completely solving the problem of environmental pollution in the process of recovery of such resources. This technology has already achieved successful industrial application. Low-Temperature Pyrolysis Furnaces provide a sustainable and efficient solution for the treatment and recycling of hazardous and organic wastes. By converting waste into valuable by-products, they not only mitigate environmental pollution but also contribute to resource recovery and energy efficiency. This technology is especially relevant in modern waste management strategies aimed at reducing the environmental footprint and promoting circular economy principles. Low-Temperature Pyrolysis Technology for Hazardous Waste Treatment Key Features: Steel Belt-Type Low-Temperature Pyrolysis Furnace: The core of this technology is a specially designed pyrolysis furnace that operates at low temperatures. The steel belt mechanism ensures controlled and consistent processing of waste materials, enhancing the efficiency and effectiveness of the pyrolysis process. Anaerobic Pyrolysis: The process occurs in the absence of oxygen, preventing combustion and the release of harmful by-products typically associated with high-temperature incineration. This method significantly reduces the emission of hazardous substances and environmental pollutants. Comprehensive Recovery: The technology enables the complete conversion of organic matter into reusable products. Heavy metals are safely separated and can be reclaimed or disposed of in an environmentally friendly manner. Waste-to-Resource Conversion: Organic components of the waste are transformed into valuable resources such as synthetic gases, oils, and char, which can be repurposed in various industries. This conversion supports a circular economy by reducing waste and promoting the reuse of materials. Applications: Waste Enamel Wires: Efficiently recovers metals and organic insulation materials without the release of toxic fumes. Waste Circuit Boards: Extracts valuable metals and other components, minimizing electronic waste. Waste Tires: Produces reusable by-products such as carbon black and pyrolysis oil, reducing the environmental impact of tire disposal. Waste Lithium Batteries: Safely processes and recovers valuable metals like lithium and cobalt, addressing the growing challenge of battery recycling

As the demand for lithium-ion batteries (Li-ion) continues to grow, especially in electric vehicles (EVs), consumer electronics, and renewable energy storage, the need for efficient recycling processes has become increasingly important. Lithium battery recycling production lines are designed to recover valuable materials from used batteries, reducing environmental impact and providing a sustainable source of raw materials for new batteries. How a Lithium Battery Recycling Production Line Works Collection and Sorting Collection: Used batteries are collected from various sources, including EVs, consumer electronics, and industrial applications. Sorting: Batteries are sorted based on their chemistry (e.g., lithium cobalt oxide, lithium iron phosphate) and condition. This step is crucial because different battery chemistries require different recycling processes. Discharging Safe Discharge: To prevent fires or explosions during processing, batteries are fully discharged in a controlled environment. This step neutralizes the electrical energy stored in the batteries, making them safe for further handling. Shredding and Size Reduction Mechanical Shredding: Batteries are mechanically shredded into smaller pieces, breaking down the battery cells into fragments. This process separates the battery components such as the casing, electrodes, electrolyte, and separator materials. Size Reduction: Additional milling or grinding processes may be employed to further reduce the size of the particles, enhancing the efficiency of subsequent separation steps. Separation and Extraction Magnetic Separation: Magnets are used to separate ferrous materials, such as steel casings, from non-ferrous components. Hydrometallurgical Processing: Involves chemical leaching to dissolve and extract valuable metals like lithium, cobalt, nickel, and manganese from the shredded battery materials. The resulting solution is processed to recover these metals as salts or oxides. Pyrometallurgical Processing: High-temperature furnaces are used to smelt the shredded material, recovering metals in a more concentrated form. This process is often used for recovering cobalt, nickel, and copper. Purification and Refining Precipitation and Filtration: The dissolved metals are precipitated out of the solution, filtered, and purified. This step may involve multiple stages of refining to achieve high-purity metal compounds suitable for reuse in new batteries. Electrolysis: Metals like lithium can be further purified through electrolysis, where an electric current is used to deposit pure metal onto electrodes. Recovery of Non-Metallic Materials Plastics and Electrolytes: The plastics and separator materials are typically separated through flotation or solvent extraction techniques. These materials can be recycled into new products or safely disposed of. Graphite Recovery: Anode materials, often composed of graphite, can be recovered and processed for reuse in new battery anodes. lithium battery recycling plant Advantage: 1. Realization of charged crushing process 2. Low-temperature evaporation of electrolyte for harmless disposal 3. Diaphragm Clean Recovery 4. Highly efficient recovery of polar powders 5. High-precision color sorting 6. Zero discharge of production wastewater 7. Exhaust gas centralized treatment, discharge up to standard 8. Harmless recycling of fluorine

The Ductile Iron GGG50 Gate Valve Supplier provides a high-performance non- rising stem gate valve engineered to comply with DIN 3352 standards. Constructed from robust ductile iron GGG50, the valve offers superior strength and long-term durability. It features a nominal diameter of DN300 (12 inches) and a pressure rating of PN10 (equivalent to Class 150 LB), making it ideal for a wide range of industrial applications. The valve includes RF (raised face) flanged ends for secure, straightforward installation and is operated manually via a handwheel for accurate and reliable flow control.

1. Automatic loading with vibration bowl is optional 2. Cam motor for feeding to make thread 3. Specially for small and short hollow parts 4. Cooling system is optional 5. High precision, stability and high durability 6. CE, ISO9001-2008 Specification Working diameter 9-16mm Range of pitch 1.0-1.75mm Thread length 15mm Outside diameter of rolling die 40-50mm Inside diameter of rolling die 25.4mm Thickness of rolling dies 15mm Main power motor 1.5KW Voltage 380V 3P 50Hz Cam motor 100W Weight(reference) 260KG Package Dimension(L*W*H) 940*790*1290 mm Dimension(L*W*H) 840*690*1190 mm Q1. Are you factory or trading company ? A1. We are factory of manufacturing thread rolling machine and dies by ourselves.       Welcome to visit our factory, if possible.   Q2. What is the delivery time ? A2. Usually 15-25 working days for machine, and 10-15 working days for dies.   Q3. What is the warranty time for machine? A3. Usually 12 months from B/L date.   Q4. What is the payment term? A4. T/T, Western Union, Money Gram, Alipay, PayPal.       50% as deposit, and 50% before shipping.   Q5. Is it possible to design and produce automatic loading & unloading devices? A5. Yes, Engineer can design special auto feeding device according to your products.       But please provide the drawing of your products before that.   Q6. How will you solve problems that we face during using your machine? A6. A. Please provide necessary videos and pictures that can show the problems, our engineers will check        and give corresponding solutions.         B. Will arrange engineers to solve problems at the scene, if possible.

Minimum Order: 1 bags

EKAQ proofing machine is especially designed for checking the quality of a newly made gravure cylinder before printing. Rubber roller drives cylinder rotation to avoid the slip action. Load and unload of gravure cylinder is controlled by Step switch. Auto self-control system for blade angle and lock.Monitor display and single completely job can be finished automatically while guarantee satisfactory printing and precise registration. Proofing Machine Main Technical Parameters   EKAQ 1600 EKAQ 2000 Cylinder length (mm) 400-1600 400-2000 Cylinder diameter (mm) 120-400 120-400 Printing speed (m/min) 30-50 30-50 Printing press (mpa) 2-3 2-3 Drum diameter  (mm) 900 900 Rubber coating width (mm) 1600 2000

GP Gravure Cylinder Chrome polishing machine is designed for polishing chrome layer of gravure cylinders to achieve the smoothness and brightness. It is PLC controlled with touchable screen via VFD either manually or automatically. Automatically operation can avoid artificial failure and guarantee production stability and product’s quality. Chrome Polishing Machine Main Technical Parameters Model GP 1500 GP 2000 GP 2500 Cylinder diameter (mm) 90-400 90-400 90-400 Cylinder length (mm) 400-1500 400-2000 400-3000 Cylinder rotation speed (r/min) 100-300 100-300 100-300 Polishing head to-and-fro-speed (mm/min)  350-890 350-890 350-890 Polishing head forward speed (mm/min) 560 560 560 Polishing head motor rotation speed (r/min) 580-1278 580-1278 580-1278 Polishing head oscillation frequency (hz) 20-45 20-45 20-45 Tailstock movement speed (mm/min) 1120 1120 1120 https://www.chinagravure.com/gravure-cylin , der-making-machines.html

BYMS gravure cylinder grinding machine applies pneumatic pressing head unit, which keeps the pressure constant during the grinding process and ensures the consistency of the grinding effect. Compared with the similar production,our computer control program is more convenient. The grinding heads can find their working position from anywhere to avoid the unnecessary resetting time. Main Technical Parameters Model BYMS 1500 BYMS 2000 BYMS 2500 Cylinder diameter (mm) 90-400 90-400 90-400 Cylinder length (mm) 400-1500 400-2000 400-2500 Cylinder rotation speed (r/min) 100-450           100-450           100-450           Grinding head to-and-fro speed (mm/min) 100-1300 100-1300 100- 1300 Grinding head rotation speed (r/min) 100-450 100-450 100-450 Grinding head up/down speed (mm/min) 560 560 560 Pressure adjustment range (kg) 20-120 20-120 20-120 Dimension(L×W×H) (mm) 3700×1600×2000 4200×1600×2000 4700×1600×2000 As a leading manufacturer of Copper Grinding Machines, we are dedicated to providing the highest quality products and services to our customers. Our machines are specifically designed for the production of gravure printing cylinders, and are capable of grinding copper, chrome, and with other material precision and efficiency.

An Automatic Plating Line, also known as an Automated Plating Line, is a production system that performs the plating process automatically without the need for manual intervention. This system is ideal for mass production of high- quality plated components with consistent results. The whole Electroplating Line adopts touch screen interface, automatic program system and PLC control. As long as input length, diameter and coating thickness, it will calculate the time and current of electroplating, adjust the position of the anode, and launch the additive according to the working condition automatically. No manual intervention is needed in the work which will avoid manual error, to guarantee the quality and improve efficiency. The machine body is covered by stainless steel . Beautiful appearance for displaying and it will extend the service life of the equipment. The roller loading is mechanically clamping to prevent leakage. Each single machine can be operated either automatically or manually. More about Pioneer Flying