Machine Tools Parts

Diamond grinding tool disc hardness 30-40 Rockwell machined parts. Description Diamond, which is a mineral composed of carbon elements, is an allotrope of graphite, with a chemical formula of C, and is also the original body of common diamonds. Diamond is the hardest substance naturally occurring in nature. The chemical composition of diamond is C, which is a homogeneous and polymorphic variant of carbon with graphite. In the chemical composition of minerals, it always contains elements such as Si, Mg, Al, Ca, Mn, Ni, and often contains impurity elements such as Na, B, Cu, Fe, Co, Cr, Ti, and N, as well as carbohydrates. The crystal structure of diamond mineral belongs to the equiaxed tetrahedral structure of homopolar bond. The carbon atoms are located at the corners and the center of the tetrahedron and have a high degree of symmetry. The carbon atoms in the unit cell are connected by homopolar bonds with a distance of 154pm. Common crystal forms are octahedron, rhombic dodecahedron, cube, tetrahedron and hexaoctahedron, etc. What are the Diamond Grinding Disc replacement conditions? 1, wear problem Any grinding wheel has its certain use and wear requirements. If the wear condition reaches a certain level, it must be replaced with a new one. It can not be used in order to save material, it is an extremely unsafe violation. Generally, when the grinding wheel wears to a diameter 10mm larger than the diameter of the chuck, it should be replaced with a new one. 2, validity period The new wheels removed from the warehouse are not necessarily qualified wheels, and even new wheels purchased from manufacturers are not necessarily qualified wheels. Any grinding wheel has a certain expiration date. If it is used within the expiration date, it is a qualified grinding wheel; if it is used beyond the expiration date, it is not necessarily a qualified grinding wheel. The regulations stipulate that "the grinding wheel should be used within the validity period, and the resin and rubber bond grinding wheel must be subjected to a rotation test after storage for one year before it can be used". 3, texture issues If cracks are found in the grinding wheel during use, you should stop using it immediately and replace it with a new one, so as to avoid accidents caused by grinding wheel breakage. CNC Machining Description Product name Diamond grinding tool disc hardness 30-40 Rockwell machined parts Material 42Crm Alloy steel Surface Treatment Tin and CBN Surface roughness Ra0.5~2um Material standard ASTM Operating RPM500-30000, coaxiality<0.05mm Hardness 30-40 Rockwell Service available OEM /ODM/Customized/Design Process CNC Machining,Tin and CBN plating Drawing Format 3D/CAD/Dwg/IGS/STP Features High precision, high strength, high quality

Mirror Polishing Customized OEM Precision CNC Machining Parts Our services WeiLIN is a world-class manufacturing service provider in ShangHai. We got advanced equipment to provide all-around customized products for manufacturers around the world, focusing on CNC processing . Our goal is to make customization easy. so to have your products and brands stand out, we can not only process hundreds of materials, with stainless steel,aluminum, bronze, brass, copper, plastic, titanium steel , and skilled technicians provide you with a variety of high-quality surface treatment services, such as anodizing, sandblasting, powder coating, roll coating, part marking, heat treatment, precious metal plating. We welcome your drawings and will follow them to make the samples for you.we could manufacture the goods according to your samples or drawings also Product processing capacity ? 1. Main Materialsa Stainless Steel SS201,SS301,SS303, SS304, SS316, SS416 etc. Steel mild steel, Carbon steel, 4140, 4340, Q235, Q345B, 20#, 45# etc. Brass HPb63, HPb62, HPb61, HPb59, H59, H68, H80, H90 etc. Copper C11000,C12000,C12000, C36000 etc. Aluminum AL6061, Al6063, AL6082, AL7075, AL5052, A380 etc. Iron A36, 45#, 1213, 12L14, 1215 etc. Plastic ABS, PC, PE, POM, Nylon, PP, Peek etc. 2. Surface Treatment Stainless Steel Polishing, Passivating, Sandblasting, Laser engraving Steel Zinc plating, Oxide black, Nickel plating, Chrome platingk, Carburized, Powder Coated Aluminum parts Clear Anodized, Color Anodized, Sandblast Anodized, Chemical Film,Brushing,Polishing Plastic Plating gold (ABS), Painting, Brushing (Acylic), laser engraving 0.01mm SS201 CNC Precision Machined Parts OEM CNC Turning Milling Parts 0 0.01mm SS201 CNC Precision Machined Parts OEM CNC Turning Milling Parts 1 0.01mm SS201 CNC Precision Machined Parts OEM CNC Turning Milling Parts 2

Product Description Press cover Stainless Steel or iron ZF4083d Ra1.6 Dia.26.8mm 0.02 mm tolerance metal machining parts customized Description: Tolerance 0.02mm metal machining parts, made of stainless steel 201/303/304/316 ect. Parameters: product name Press cover/screw nut application kitchen tap diameter D26.8 +/-0.02mm thread M36x1.25 tolerance proceed as Standard GB/T 1800.1-2009 IT12 raw material die casting / stainless steel thread checking standard go gauge surface no burs, no deformation Our winning strategy: provide value-added engineering services. assist you in material selection, structural testing, machining, and final product arrangement. one-stop customized processing service. Pre-sale service 1. We have full stock and can deliver within short time. 2. OEM and ODM order are accepted, Any kind of logo printing or design are available. 3. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you. 4. All of our products are produced by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service. After you choose 1. We will count cheapest shipping cost and make invoice to you at once. 2. Check quality again, then send out to you at 1-2 working day after your payment 3. Email you the tracking number and help to chase the parcels until it arrives you.

Cnc Precision Parts Custom CNC Machining High Precision Cnc For Motor Spare Parts What is CNC machining? CNC (Computer Numerical Control) machining is a subtractive manufacturing technology: parts are created by removing material from a solid block (called the blank or the workpiece) using a variety of cutting tools. This is a fundamentally different way of manufacturing compared to additive (3D printing) or formative (Injection Molding) technologies. The material removal mechanisms have significant implications on the benefits, limitations and design restrictions of CNC. More on this below. CNC machining is a digital manufacturing technology: it produces high-accuracy parts with excellent physical properties directly from a CAD file. Due to the high level of automation, CNC is price-competitive for both one-off custom parts and medium-volume productions. Almost every material can be CNC machined. The most common examples include metals (aluminum and steel alloys, brass etc) and plastics (ABS, Delrin, Nylon etc). Foam, composites and wood can also be machined. The basic CNC process can be broken down into 3 steps. The engineer first designs the CAD model of the part. The machinist then turns the CAD file into a CNC program (G-code) and sets up the machine. Finally, the CNC system executes all machining operations with little supervision, removing material and creating the part. Quick Detail: ITEM: Precision CNC Machining Material: stainless steel,steel,brass,Aluminum or Aluminum Alloy etc. Process: CNC machining+deburrs Tolerance: as your request Surface: deburrs,degrease,chamfer Service available: OEM & ODM

The WBC series plastic barrel & case crusher is specially designed for recycling various vacuum plastic containers. Optimized design based on the traditional heavy-duty plastic crusher, increases the size of the crushing chamber, it does not need a shredder for primary shredding, and crush the material to the required size once. Thereby reducing the recycling process, reducing the cost, and improving the efficiency of recycling.

Minimum Order: 1 bags

PRODUCT DESCRIPTION Water Pump Burgmann Seals 560B Plastic Carbon 9.5mm Mechanical Seal Mechanical Seal Burgmann Seal Type 560B Water Pump Seal Mechanical Seal Model NO. 560 Type 560B Balance Unbalance , d Rotary Ring Ceramic/Sic Stationary Ring Plastic Carbon/Carbon/Sic Spring SUS304/SUS316 Se , condary Seal NBR/EPDM/HNBR/Viton Trademark Bergma , n Transport Package Carton Specification 9.5mm to 76.2mm Origin China HS Code 84842000 Replace Burgman EA560B type Metric Operating Limits: Pressure: ≤1MPa Speed:< , br> ≤12 m/s Temperature: -30℃～+200℃ Rotary Ring(Plastic Carbon/Carbon/Sic/tc) Stationary Ring(Ceramic/Sic/Tc) Secondary Seal(nbr/Epdm/VITON) Spring & Other Parts(Sus304/Sus316) Structural model Water Pump Burgmann Seals 560B Plastic Carbon 9.5mm Mechanical Seal 0

Technical parameter: Ratio range: basic type 25～4000 Torque range: 2.6～900 kNm Power range: 22～1920 kW 1). P series planetary gear units adopts modular design and can be combined according to customer requirements. It is a new type of reducer with wide versatility. 2). The gear units is driven by involute planetary gears, which make rational use of internal and external meshing and power splitting. 3). All gears are carburized and quenched to obtain high hardness and wear- resistant surface. After heat treatment, all gears are grinded, which reduces noise and improves the efficiency and service life of the whole machine. 4).The planetary gear unitshas the characteristics of light weight, small volume, small transmission ratio range, high efficiency, stable operation, low noise and strong adaptability.

Minimum Order: 100

Detailed Product Description High Light: Industrial Boiler Equipment, Industrial Boiler machine Tubesheet - Dish Head Production Line for Industrial Boiler Description: The machine is used for the processes of edge cutting, beveling, cutting of manhole, hole drilling, dish head tube connecting hole cutting and welding for dish heads. Applications: The machine is used for the processes of edge cutting, beveling, cutting of manhole, hole drilling, dish head tube connecting hole cutting and welding for dish heads.

PRODUCT DESCRIPTION TK Series Bearing Housing TK6204-152 With Total Seals Long Span Life Bearing Housing Specification TK 6204-89 84 47 47.1 25 45 47.5 TK 6204-108 103 47 47.1 25 45 47.5 TK 6204-133 128 47 47.1 25 45 47.5 TK 6204-159 153 47 47.1 25 45 48 TK 6205-89 84 52 52.1 30 46 48.5 TK 6205-108 103 52 52.1 30 46 49 TK 6205-133 128 52 52.1 30 46 49 TK 6205-159 153 52 52.1 30 46 49 TK 6305-108 103 62 62.1 35 49 52 TK 6305-133 128 62 62.1 35 49 52 TK 6305-159 153 62 62.1 35 49 52 Material: 1*Bearing housing ——SPHC 【100% good quality material】 1* Inner seal ring ——PA6 【High temperature resistance】 1* Female labyrinth seal——POM 【Low water absorbing, high abrasion resistance】 1* Male labyrinth seal——POM 【Low water absorbing, high abrasion resistance】 1* Metal cover seal——SPCC 【High precision】 1* Protective cover——PA6 【High temperature resistance】

Product Description Plastic Electricity Tube Electric Pvc Conduit Pipe Electrical Technical Characteristics: 1. Excellent bending flatness and bending performance: after 90degrees of bending , the gauge can pass under self-weight, andthere is no visible crack after normal temperature bending 2. Excellent impact and compression resistance ( withstanding pressure of above 750N ) 3. Excellent heat resistance 4. Flame retardant and self-extinguishing ( self-extinguishing within 30 seconds ) 5. Excellent electrical insulation performance 6. Preventing damage from rodents and insects Product features Pressure resistance, anti-aging: the use of high-quality improved PVC or PE engineering plastic extrusion, high compressive strength, the normal circumstances do not have to do the foundation or encapsulation, anti-settlement, can replace the steel pipe through the road, corrosion resistance. Life of up to 50 years. Complete specifications, the combination of diverse: product appearance, and the original cement pipes, corrugated pipes and other channels can be free transition, combination, and the corresponding connector, plug,Le belt, special plastic and other accessories, easy construction operations. UPvc Pipes And Fitting Structural innovation, saving management:UPvc Pipes And Fitting pipe structure is compact, less road excavation, only 10% of the cement pipe, effectively save the city underground pipe resources, the road traffic and municipal impact less. Toughness, bending freedom: a 6-meter pipe, bending string up to 1.2 meters above the construction of obstacles or cross the other pipeline can easily avoid. Convenient construction, saving time: the jacket and sub-tube into one, no need to wear a pipe twice to wear cable, to avoid the second sub-tube deformation kink, sort chaos, repeated construction of the trouble;UPvc Pipes And Fitting light weight, Easy handling; smooth inner wall, threading effort. High utilization rate, low cost: set of sheath and tube as a whole, the hole effective space, can be connected after the use of exit off, fuel consumption, less investment. Specification Length Thickness Size super PVC Cold Bending wire tube(Underground available) 3.8m 1.45mm DE16*1.45mm super PVC Cold Bending wire tube(Underground available) 3.8m 1.6mm DE20*1.6mm reinforcement PVC Cold Bending wire tube(Underground available) 3.8m 1.3mm DE16*1.3mm reinforcement PVC Cold Bending wire tube(Underground available) 3.8m 1.5mm DE20*1.5mm normal Cold Bending wire tube 3.8m 1.0mm DE16*1.0mm normal Cold Bending wire tube 3.8m 1.15mm DE20*1.15mm normal Cold Bending wire tube 3.8m 1.35mm DE25*1.35mm PVC wire tube 3.8m 1.0mm DE20*1.0mm Anti Aging UPVC Electrical Conduit Pipe 1.6-1.85mm Thickness 0 Anti Aging UPVC Electrical Conduit Pipe 1.6-1.85mm Thickness 1

JIS Flange introduce: JIS SO JIS BLIND 5K,10K,16K,20K 5K,10K,16K,20K SS400,A182 F304,A182 F316 SS400,A182 F304,A182 F316 M.S. Flange Size : DN15-DN2000 Rating : #150, #300, #600, #900; 5K,10K,16K,20K,30K; PN-16, PN-40 Type : Weld-Neck, Slip-On, Socket Weld, Lap Joint, Blind S.S. Flange Size : DN15-DN2000 Rating : #150, #300, #600, #900; 5K,10K,16K,20K,30K; PN-16, PN-40 Type : Weld-Neck, Slip-On, Socket Weld, Lap Joint, Blind M.S. Fitting Size : 1/8” – 26” Type : Butt Weld, Socket Weld, Screw Type Rating : #150, #3000, #6000, #9000,SCH40/STD,SCH80,SCH160,XS/XXS S.S. Fitting Size : 1/8” – 26” Type : Butt Weld, Socket Weld, Screw Type Rating : #150, #3000, #6000, #9000,SCH40/STD,SCH80,SCH160,XS/XXS

Product Description M/31082 Norgren Industrial Air Springs For Extending The Service Life of The Sorter And Support Structure M/31082 Norgren Industrial Air Springs product description: The air spring shock absorber M/31082 Norgren Industrial Air Springs can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded • In order to press the air spring shock absorber M/31082 Norgren Industrial Air Springs to the minimum height, a restoring force is required. Usually, this is achieved by applying a load • The entire bearing surface of the upper and lower plates of the air spring shock absorber M/31082 Norgren Industrial Air Springs must be used to absorb the force • Before disassembling the air spring shock absorber M/31082 Norgren Industrial Air Springs , the internal air must be released to prevent accidents and personal injury. • During operation, the rubber air spring shock absorber M/31082 Norgren Industrial Air Springs shall not be in contact with other parts M/31082 Norgren Cross OEM Original Equipment Manufacturer: Manufacturer Norgren M / 31082 Contitech:FD 138-18 DS AIRSUSTECH Part Number:2B8X2 Norgren M / 31082 Norgren Model: M/31082 Packaging cartons ContiTech (Continental) Model: FD138-18 DS Place of production: imported from Germany Brand Name: ContiTech Model: FD138-18 Packaging cartons Place of production: Imported from the UK Brand Name: Nuoguan Model: M/31082 Quality assurance: one year

PRODUCT DESCRIPTION Lawn Mowers Reel Drive Coupling W/O Pulley 88-7840 For Toro 1000 1010 Mower Advantages 1. Low cost 2. High efficiency 3. Robust 4. Overload protection 5. Eliminates dynamic shaft seals Our company have extensive modelling capabilities for optimising couplings, in terms of obtaining precise pull-out torques, torsional compliance, electromagnetic losses in conducting membranes, in order to achieve the most compact device for given operating conditions. Specification Product Name: Toro Mower Part Material: Stainless Steel, Neodgymium Magnet & Iron Head Type: Customized Size: OEM Standard Certificate ISO9000 Port Shenzhen Packing: Customers' Require Standard: Toro Mower Standard Application Fits for Toro Mower 1000 1010 1600 800 2600 2000 Part. Package 1) Usually we use PE bags and carton,0.5kg-10kg/carton; 2) If necessary we will use wooden case; 3) And we can also package as your requirements. FAQ 1. Could I have prices of your products? Welcome. Pls feel free to send us an email here. You will get our reply in 24 hours 2. Can we print our logo/website/company name on products? Yes, please advise the size and Pantone Code of the logo. 3. What's the lead time for regular order? 14-21 days for order quantity lower than 5000pc; For more quantity, usually 30 days. 4. Can I get a discount? Yes, for the order quantity more than 500 pcs, please contact us to get the best price. 5. Do you inspect the finished products? Yes, each step of production and finished products will be came out inspection by QC department before shipping.

Heat Resistant Fabric Conveyor Belt China Conveyor Belting Exporter High temperature-heat resistant conveyor belt PRODUCT DESCRIPTION Heat Resistant Grade of Heat Resistant China Conveyor Belting Exporter Four grades divided according to different testing temperatures: Grade Testing temperature(≤) T1 100℃ T2 125℃ T3 150℃ T4 175℃ Physical Properties of Rubber Cover of Heat Resistant Fabric China Conveyor Belting Manufacturer Item Grade T1 T2 T3 T4 Changing range allowed Hardness Difference between before-aging and after-aging (IRHD) +20 +20 ±20 ±20 Maximum value after aging (IRHD) 85 85 85 85 Tensile strength Change rate of property/ % -25 -30 -40 -40 Minimum value after aging/ MPa 12 10 5 5 Breaking elongation Change rate after aging/ % -50 -50 -55 -55 Minimum value after aging/ % 200 200 180 180 Baoxiang High temperature-heat resistant conveyor belt: mainly used in metallurgy, construction and other industries, conveying sinter, coke, cement clinker and other high-temperature materials, material temperature does not exceed 800℃, belt surface temperature does not exceed 220℃. Features: epDM rubber is used as the covering layer, and the skeleton material is made of domestic special high-temperature resistant canvas. The unique formula design solves the key problems due to the high saturation of EPDM rubber, poor adhesion and low inter-layer adhesion. With a light body, long life (about 2-4 times), good heat resistance characteristics. Heat resistant conveyor belt is made of multi-layer rubber cotton canvas (poly- cotton) covered with high temperature or heat resistant rubber, bonded together by high temperature vulcanization, suitable for conveying hot coke, cement, slag and hot casting below 175℃. Interlayer bonding strength: Item Cloth layer Cover with cloth layer Thickness of covering layer ≤1.5mm Thickness of covering layer ＞1.5mm Longitudinal test average value≥ 8.0 7.0 12 longitudinal test lowest peak≥ 8.0 6.5 11 Heat - resistant (high - temperature) conveyor belt selection, product use matters needing attention: 1. Selection of heat-resistant conveyor belt: The type of heat-resistant belt is selected according to the temperature, surface structure and viscosity of materials transported by the heat-resistant belt. For example, when the conveying temperature of sintered ore, coke and other large materials is 150℃, and the contact area between the material and the belt surface is small, the belt surface temperature is maintained at 60- 80℃; When conveying cement powder and other materials with low viscosity, the temperature difference between the material and the temperature of the belt surface is very small. The surface temperature is closely related to the service life of the tropics. It directly affects the glue and the core layer, the bonding strength between the core layer, the wear resistance and crack resistance of the glue. The type of topics should be selected after fully investigating and measuring the surface temperature of the belt and other service conditions. Thicker covering glue is an important condition to ensure the tape has a long service life. It is recommended that the thickness of the cover glue resistant to tropics is 6-9mm for gluing and 2-4mm for gluing. 2. Key points for use of heat-resistant conveyor belt: The surface temperature of the whole strip should be continuously measured, recorded and monitored to avoid unnecessary temperature rise. To the material tape forced cooling (preferably on the layer of water flushing); Keep the conveying material evenly distributed according to the bandwidth, not excessively concentrated; Prevent the presence of oil (trace oil in the cooling water) from damaging the belt more than the heat itself; A belt containing hot material shall be removed promptly when it ceases to operate; It is better to use hot glue connection for the connection of tropics. Baoxiang provides rubber belting for sale, we are committed to the alkaline resistant conveyor belt, material handling conveyor belt series, rich experience, welcome to consult. https://www.baoxiangbelt.com/produ , ct-heat-resistant-fabric-conveyor-belt.html