Other Machinery & Parts

WE67Y/K- series Use two or more oil cylinders Providing duplex linked or multiplex synchronous device.The linked brake can produce unusually long workpiece. Especially suitable for city building ,evpressway lamp poles, automobile beams and so on. The linked brake can be used alone, in order to raise production efficiency. We can design and produce for special order.

Minimum Order: 1 bags

WC67Y series Whole-welded structure,vibration to eliminate stress,with high strength and good rigidity. Mechanical stop,steel torsion bar to maintain synchronization,high precision.electrical control,Manual fine-tuning of back gauge and slide stroke,numerical display. Deflection compensation unit installed on the top die.Compensation unit for lower die is adopted for the machine which is above 250tons 4000mm length.

Minimum Order: 1 bags

Last month, one of our old customers in Brazil placed their mass production order for E-SV12-20, a solenoid-operated, 2 way, normally closed, poppet-type, screw-in hydraulic cartridge valve equivalent to HydraForce SV12-20. Today, we received email from this customer that they would also like to order the normally open type one with us, E-SV12-21. Per customer, the normally closed one E-SV12-20 has passed their testing without any problem, they believe that this normally open one will also work very well. Due to urgent needs, they will place the order directly without testing prior to mass production. This is not the first time that old customers place mass production order with us without testing. AAK’s stable quality helps customers save a lot of time and cost from testing. AAK hydraulic solenoid cartridge valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV12-21 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 240 bar (3500 psi) Flow: 114 lpm (30 gpm) Internal Leakage: 3 drops/min max. at 240 bar (3500 psi) Operating Fluid Temperature: - 40°C ~ 120°C (with Standard Buna N seals) Cavity: VC12-2 AAK E-SV12-21 Hydraulic solenoid cartridge valve, benchmarking HydraForce SV12- 21, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (820) 2024-10-28

Minimum Order: 1 bags

Economical CNC Small Hole Drilling EDM machine TE503 I. Features: 1. This machine is mainly used for drilling parts which are difficult to realize in plane group holes and various inclined planes, curved surfaces, deep and small holes, etc., can drill steel, aluminum, copper, castings, alloys, titanium alloys, conductive ceramics and other conductive materials of the blind hole and through-hole processing. 2.Basic structure: Includes the machine body, the numerical control pulse power control cabinet, the working fluid system and so on. 3. The machine body: Includes the machine bed, column, X-axis, Y-axis, Z- axis, w-axis (manual). 4. CNC Pulse Power Supply Control Cabinet: Includes Industrial Control Computer, CNC system, liquid crystal display, servo drive, machine tool appliances, high-efficiency amplifier, electric pulse power, etc. II. The machine characteristics: 1. All-in-one design, semi-enclosed stainless steel water tank and the back cover board. 2. With the machine tool integrated design of the electronic control system, with a minimum of connectors to achieve the most stable and reliable results. 3. Precision Ball screw and high-precision linear guideways are used to ensure the permanent and reliable operation of the machine tool. 4. The X-Y axis is driven by AC servo motor; the speed of moving axis is fast and the positioning precision is high. 5. Multi-function electronic hand box, to realize a series of functions such as shifting axis, locating, machining control, etc. 6. 4-axis linkage control (extended B-C axis). 7. Windows interface operating system man-machine dialogue, easy to use. 8. Using industrial control computer, running fast, stable and reliable. 9. Use self-developed CONTRA CNC EDM drilling special software (support for the follow-up software upgrade services). 10. Flexible and diverse programming methods, support direct conversion of CAD, MDI list programming, etc. 11. Support simple G code instructions, greatly facilitate the use of operators, efficiency increased by 2 times. 12.The system can save the machining program to record the process parameters of each hole and can be used for quality analysis. 13. Multiple data transfer modes (USB LAN RS232). 14. 15' HD LCD liquid crystal display screen. 15. Guide holder made in Taiwan, long-lasting accuracy and easy adjustment 16. Precision cemented carbide seal rotating head, with good sealing performance and rotating accuracy. 17. High pressure pump, low noise, stable and reliable pressure, especially suitable for small electrode processing. III. Model TE 503 Speciation Specification Item No: TE503 Worktable size(L×W) 700*400 mm Table travel(X×Y) 500*400mm Z axis travel 380 mm W axis travel 300mm Max distance between work table and guider 370mm Max. drilling speed 30-60mm/min Working liquid pressure 0-11 Mpa Max. working current 30 A Electrode diameter 0.25-3.0 mm Max workpiece weight 200kg Max X Y axis moving speed ≥2000mm/min X Y Z driving AC motors for X/Y axis, DC servo motor for Z axis Move the minimum unit 0.001mm Axis moving control mode Electric hand box Input/output interface USB LAN RS-232 Working solution Clean water Control mode Industrial computer control card Screen display 15″LCD touch screen Program MDI CAD G code Positioning accuracy 0.025 Repeat positioning accuracy 0.02 Power supply 380V /50 Hz Max. Power consumption 3.5 kw Weight 800Kg Machine dimension 1200*1500*2200mm < , br>IV. Main parts list NO. Name Model Br , and Origin 1 Servo motor MS1H4-40B30CB Huichuan , China 2 Driver IS620PS2R8I Huichuan China 3 Linear guide LEG20C Hiwin Taiwan , 4 Ball screw FN2005-447 Haosen China , 5 Industry computer DPC-Z3-W(ST-NA10Z) Siteming , China 6 Moving control card ADT8940 ZWX China 7 LCD display 163V5LSB2 PHILIPS Hol , land 8 Electronic hand box HTD-B70-PL7-MOS-M HT Chin , a 9 Air switch DZ47-60-C25 Chint Chin , a 10 Contactor LC1D09\12\T25< , br> Schneider France 11 Mi , niature relay G5V-2 Omron Japan 12 Switching power NES-75-24 Mingwei Taiwa , n 13 PLC module FX3GA-24MR Mitsubishi Japan 14 High power COMS tube IRFP250 IR USA 15 High power 3 phase rectifier 75A SANREX Japan 16 Electronic Hand Box ZG China 17 Rotating head ZG China 18 Screw rod bearing NSK Japan 19 Casting< , br> HT250 second tempering GS China 20 , Machine tool sheet Metal spraying GS China

Minimum Order: 2 barrels

Single row cylindrical roller bearings are designed to withstand heavy radial loads and high speed applications. The outer ring of the NU bearing has integral flanges on both sides and the inner ring has no flanges, allowing bidirectional axial displacement. An important feature is the separable design, which facilitates the installation and the individual parts of the bearing are interchangeable. The radial load-bearing capacity is high Low friction Long service life It can withstand bidirectional axial displacement Separable design size Inner diameter 170 mm Outer diameter 260 mm Width 42 mm

Radial contact ball bearings with sealed or shielded caps are designed to accommodate radial loads in a single direction and some axial loads. A bearing series is based on a single cross-section that remains constant as the bore diameter increases, resulting in significant space and weight savings. Bearings are available in both metric and imperial boundary sizes. Depending on the design and series, bearings can be chemically and corrosion-resistant. Withstands bi-directional radial and some axial loads Thin cross-section light Low friction High hardness High running accuracy size Inner diameter 635 mm Outer diameter 685.8 mm Width 25.4 mm Radial cross-section 25.4 mm

Unidirectional thrust ball bearings can accommodate axial loads in a single direction. It cannot withstand any radial load. Its parts are separable, making it easy to install and dismantle as well as for maintenance checks. Most parts are interchangeable. The inner bore of the shaft washer is ground to achieve an interference fit with the shaft. The separable design facilitates installation and dismantling as well as maintenance checks Replaceable parts The inner bore of the shaft washer is ground to achieve an interference fit with the shaft size Inner diameter 120 mm Outer diameter 170 mm Thickness 39 mm performance The basic dynamic load rating is 127 kN The basic static load rating is 390 kN The reference speed is 1 600 r/min

Two paired ultra-precision, high-speed, E-type design with single column angle contact ball bearings and seals The two ultra-precise, high-speed E-designed, sealed paired single-angle contact ball bearings can be used in a variety of configurations. Compared to the same SKFB design high speed bearing, it has slightly higher speed capacity and can withstand higher loads. The operation accuracy is very high Can withstand a very high rotational speed Contact seal The bedded seal extends the service life of bearings Bearings Size d 45 mm bore diameter D 75 mm outer diameter B 32 mm width

SKF 6238M ball bearing - the ultimate choice for demanding heavy-load applications. Precision engineered and made with advanced materials, this top- of-the-line bearing delivers unmatched performance and durability. Built to withstand even the most challenging industrial and commercial settings, investing in the SKF 6238M will make a significant difference in your operations. Features: - Advanced materials for superior durability and performance - Precision-engineered for accuracy and reliability - Can handle heavy loads with ease - Suitable for use in industrial and commercial settings - Long-lasting and dependable performance

VXF53.125-250 VXF53.150-400 VXF53.15-1.6 , VXF53.15-2.5 VXF53.15-4 VXF53.20-6.3 VXF5 , 3.25-10 VXF53.25-6.3 VXF53.32-16 VXF53.40 , -16 VXF53.40-25 VXF53.50-40 VXF53.65-63 VXF53.80-100 VXF63.100-125 VXF63.125-200 VXF63.150-315 VXF63.15-1.6 VXF63.15-2.5 VXF63.15-4 VXF63.20-6.3 VXF63.25-10 VXF6 , 3.25-6.3 VXF63.32-16 VXF63.40-16 VXF63.40 , -25 VXF63.50-31.5 VXF63.65-50 VXF63.80-80 , VXG41.1301 VXG41.1401 VXG41.15 VXG41. , 20 VXG41.25 VXG41.32 VXG41.40 VXG41.50 , VXG44.15-0.25 VXG44.15-0.4 VXG44.15-0.63 , VXG44.15-1 VXG44.15-1.6 VXG44.15-2.5 , VXG44.15-4 VXG44.20-6.3 VXG44.25-10 VXG44 , .32-16 VXG44.40-25 VXI46.15/2 VXI46.20/2< , br>VXI46.25/2 VXI46.25T/2 VXP45.10-0.25 V , XP45.10-0.4 VXP45.10-0.63 VXP45.10-1 VXP4 , 5.10-1.6 VXP45.15-2.5 VXP45.20-4 VXP45.25 , -10 VXP45.25-6.3 VXP45.32-16 VXP45.40-25< , br>VXP47.10-0.25 VXP47.10-0.4 VXP47.10-0.63< , br>VXP47.10-1 VXP47.10-1.6 VXP47.15-2.5 V , XP47.20-4 WFE502-E.. WFK240.D080 WFK240.D , 110 WFK240.E130 WFK30.D080 WFK30.D110 , WFK30.E130 WFK636.D110 WFK636.D11C WFM501 , -E000H0 WFM502-E000H0 WFM503-J000H0 WFM54 , 1-G000H0 WFM542-G000H0 WFM543-L000H0 WFM6 , 81-G000H0 WFM682-G000H0 WFM683-L000H0 WFN , 541-G000H0 WFN542-G000H0 WFN543-L000H0 WF , N681-G000H0 WFN682-G000H0 WFN683-L000H0 W , FW240.D080 WFW240.D110 WFW240.E130 WFW30. , D080 WFW30.D110 WFW30.E130 WFW636.D110 WFW636.D11C WFZ.IRDA-USB WFZ.PS WFZ.USB- , 1 WFZ311 WFZ43 WFZ44 WFZ51 WFZ661 WFZ662C WHE502-D10 WHE542-D100S WMDH000 , 0A WMDH0000B WMDH0000C WMDH0000D WMDH0 , 000F WMDH0000G WMDH0010A WMDH0010B WMD , H0010C WMDH0010D

Minimum Order: 1 bags

Recently, we received the repeat order from a customer in the United States for a hydraulic solenoid cartridge valve equivalent to Hydraforce SV08-20 again. It is a solenoid-operated, 2-way, normally closed, poppet-type, screw in hydraulic cartridge valve, with standard and manual override options. This valve is intended as a blocking or load holding device for low flow circuits having pull-only manual override requirements for handles or cable linkage. This is a standard part and commonly used. Till now, AAK hydraulic solenoid cartridge valve E-SV08-20 has been shipped to several customers in the United States. Its quality and stability has been approved by these customers. Some of them repeat the orders 2 – 3 times a year. The advantages of AAK Hydraulic Solenoid Cartridge Valve E-SV08-20 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve: Pressure Rating: 207 bar (3000 psi) Flow Rating: 23 lpm (6 gpm) Max.Internal Leakage: 0.15 ml/min (3 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 ℃ ~ + 120 ℃ with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-2 AAK E-SV08-20 Hydraulic Solenoid Cartridge Valve, benchmarking HydraForce SV08- 20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (818) 2024-10-14

Minimum Order: 1 bags

Recently, we received inquiries from several foreign customers for our Hydraulic Pilot Operated Check Valve E-DC08-40. It is a cartridge style, dual pilot operated check valve for use in blocking or load holding circuits with general purpose hydraulic fluids. Its flow rating, operating pressure, function and performance is completely equivalent to HydraForce DC08-40, and it is also a substitute of Parker CPD084P. Till now, AAK valve E-DC08-40 has been shipped to customers in Sweden, Germany and Mexico. Its quality and stability has been approved by these customers. The advantages of AAK Hydraulic Pilot Operated Check Valve E-DC08-40 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-DC08-40 Hydraulic Pilot Operated Check Valve: Operating Pressure (Inlet): 240 bar (3500 psi) Rated Flow (Inlet): 19 lpm (5 gpm) Pilot Ratio: 3:1 Check Spring Bias: 1.7 bar (25 psi) Leakage: 0.25 ml/min (5 drops/min) max. at 207 bar (3000 psi) Temperature: - 40 ℃ ~ + 120 ℃ with Buna N seals Fluids: Mineral-based or synthetics with lubricating properties at viscosities of 7.4 to 420 cSt (50 to 2000 sus) Cavity: VC08-4 AAK E-DC08-40 Hydraulic Pilot Operated Check Valve, benchmarking HydraForce DC08-40, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (817) 2024-10-07

Minimum Order: 1 bags

4 months ago in May, we shipped a 2 pcs of test order for a pilot operated relief valve equivalent to HydraForce RV10-28 to a new customer in Turkey. It is a screw-in, cartridge style, pilot operated, relief valve with reverse free flow check valve, intended for use as a pressure limiting device in demanding hydraulic circuits which require fast response, low hysteresis, low leakage, low pressure override and reverse free flow features. This customer tried another hydraulic cartridge valve manufacturer in Ningbo China 1 year ago, but failed due to quality, then they placed the 2 pcs of trial order with AAK this May in despite of AAK price is 15% higher. Last Friday, we were advised by customer that AAK samples passed testing and have been performing very well, and received their mass production order for 500 pcs. The advantages of AAK Hydraulic Pilot Operated Relief Valve E-RV10-28 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 113 lpm (30 gpm) Max. Internal Leakage: 0.50 ml/min (10 drops/min) max. at to 80% of nominal setting Cavity: VC10-2 AAK E-RV10-28 Hydraulic Pilot Operated Relief Valve, benchmarking HydraForce RV10-28, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (816) 2024-09-30

Minimum Order: 1 bags

Grandmfg® Stainless steel Oil level Sight glass, oil sight gauge, oil sight gage, oil level indicator, liquid sight glass, sight window, view ports, male thread sight glasses, domed sight glass plug, oil sight glass plugs, round observation ports, NPT sight glass windows, reservoir oil sight glass, hydraulic tank oil sight glass Material Body:   SS304, SS304L, SS316, SUS316L SUS304, SUS304L, SUS316, SUS316L O-Ring: Viton and NBR Glass Thickness: 2mm to 5 mm Glass Type: Natural Glass, Tempered Glass and borosilicate Glass / vycor glass Resist Temperature Range: -30 Centigrade to 120 Centigrade. Finishing: No Anti-explosion and withstand high temperature and high pressure. Pressure Range:  5-10 Bar or 0.5MPa to 1 MPa. Connections: NPTF, NPT, UNC, UNF, Metric and BSP (G thread) Size:M10X1, M16X1.5,M20X1.5, ,M27X1.5,M33X1.5, G 3/8,G 1/2,G 3/4,G 1    NPT 3/8, NPT 1/2,NPT 3/4,NPT 1 MOQ: 2000 Pcs each size Delivery time: 20 days. The body is Stainless Steel, the glass is tempered glass, the O ring is viton seal gasket, W/ Thread Cap Protection The oil level can be read correctly in the middle by the sight glass. The sight glasses allow for visual inspection of oil and water in tanks, air compressor, gearbox, gear cases, bearing houses and mixers Usage: Pump, Thin-wall container, Radiator, Hydraulic reservoir, receivers, Gearboxes, Speed Reducer, Compressor and Power Transmission.