Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Machinery & Parts - Others


Home > Offers to Sell > Minerals & Metals > Machinery & Parts > Others

Browse leads by category:
    
    
    Others
 

Summary of 6/26/26 21:25 GMT:>> Show Compact View
3/29/22 9:18 GMT
Screw Plug System Type Hot Press Platen CNC Machining

We are providing such plug system platens to Italy's largest laminating press maker and which has the extreme high quality requirement;deep hole must be drilled from longitudial direction and platen thickness is only 37mm and 20mm diameter drilling must have precise tolerance in the middle joints,so we are providing high precise CNC gun drilling;as they are screw plug system plug sealed and high pressure working,so we must have a tight screw basement hole size,then we can have a tight screw to hold on the plug then pressure.In a word those platens are all by tight tolerance produced and quality control is extremely strict: The quality requirement has been detailed from Raw steel plate grade and source to finished hot platen packing: Raw steel:Q345B/A36/S355JR/S235JR SIZE:1300*2500/3000/3500*40mm Deep hole diameter:20/22/25/28/30/35mm And drilling from both ends and middle joints tolerance within 1 mm CNC machining for width and length are applicable in order for precise assembly Surface grinding quality has been specific higher requirement for RA 0.8 Parallizm 0.1mm Flatness:0.10mm,any thickness minus tolerance and defects are not allowed Surface RA 0.8 Parallizm 0.1mm Hydraulic Testing:100kg/cm2 holding time 20 munites temperature tolerance within 3 c-degrees Production flow:Rough surface milling-deep hole drilling;slotting;weldings;CNC precise milling;rough grinding;CNC grinding-testing-packing-container loading Solid drilled hot press platen 1300*3000*37mm for Sergiani 10 daylight patented multi-daylights hot press

Contact:
Phone:
Fax:
Email:
Mr. Bruce Song
86-512-50133504
86-512-50133504
Send Inquiry
Kunshan Blutech Machining Co., Ltd.
Room 2905, Building 6,Zhongye Kunting,Economic Development Zone,Kunshan city,Jiangsu Province,China
Kunshan 215300
China
3/23/22 3:44 GMT
Zirconia Drawing Machine Tower Round , Wire Wheels , Reel

The transformation of Zirconia from tetragonal to monoclinic is large around 5%. It results in limiting its elasticity and fracture and formation of cracks in zirconia ceramics. Zirconia is mixed with calcium oxide (CaO), magnesia (MgO), or yttria (Y2O3) to stabilize in tetragonal or cubic phase. Partially Stabilized Zirconia (PSZ) consists of cubic, tetragonal, including monoclinic phases of zirconia. Tetragonal zirconia polycrystals (TZP) are the purest form of the tetragonal phase compared with other phases. PSZ and TZP are considered for fabrication of the biomedical device and scaffolds. Tables 1.7 and 1.8 summarize the mechanical properties of zirconia ceramics. The strength and fracture toughness of Yttria-TZP ceramics is quite considerable and almost twice that of alumina. Therefore, zirconia heads are less susceptible to the stress when contacting with metal cones. Nowadays most medical-grade zirconia from PSZ tetragonal zirconia is considered for medical device development. It shows minimal microhardness and elastic modulus, good strength, and fracture toughness than that of alumina. Developing ceramic ball heads below 32 mm is possible from Zirconia as it has superior mechanical strength.

Contact:
Phone:
Fax:
Email:
Ms. Arim Yu
86-738-8326555
86-738-8326989
Send Inquiry
Loudi Antaeus Electronic Ceramic Co.,Ltd.
Antaeus Industrial Park, Chuangye 1 Road, Loudi Economy and Technogical Development Zone, Hunan, China
Loudi 417000
China
3/18/22 1:58 GMT
Metal halide Ultra Violet Curing Lamp 7KW For Wood base coating

Products Description Metal Halide - By adding other elements/additives such as iron, lead, gallium, indium, etc. to the lamp tube, we can make a range of metal halide lamps. These additives alter the wavelength composition of the UV output of the lamp, making it suitable for deep UV curing of ultra-thick coatings. According to this characteristic, Yuyu metal halide lamps are widely used in PCB, wood-based coating, electronic product coating, optical fiber manufacturing, etc. Lamp Parameter Power output 7KW Wavelength 365nm Arc length 780mm Material High Quality Quartz Tube End caps Ceramic / metal Service life 800 to 1000 hour 1. High Quality Quartz Tubing High temperature resistance,slow UV attenuation, UV light transmittance up to 99%,and long lamp life. 2. High Quality Ceramic Lamp Base Made of high-quality ceramic materials, resistant to high temperatures and not easy to age.

Contact:
Phone:
Fax:
Email:
Mrs. Nancy
86-0750-3910960
86-0750-3910960
Send Inquiry
Guangdong Youhui Technology Co., Ltd.
No. 6, No. 3 Plant, Buling 1st Road, Tangxia Town, Pengjiang District, Jiangmen City, Guangdong Province, China
Jiangmen 529000
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   << Previous   |   1  |   2  |   3

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2026 IMEXBB.com. All rights reserved.

IMEXBB.com