Other Metal ProductsHome > Offers to Sell > Minerals & Metals > Metal Products > Other Metal Products
6/22/22 8:16 GMT
TZM moly rod/bar molybdenum and zirconium-titanium alloy rods
TZM alloy rod, molybdenum and zirconium-titanium alloy rods, titanium zirconium molybdenum alloy bar: TZM alloy is a molybdenum-based alloys commonly used in a high-temperature alloys containing 0.50% titanium, 0.08% zirconium, the remaining 0.02% carbon molybdenum alloy. TZM alloy rod advantages: 1) TZM alloy has good mechanical properties, in particular its mechanical properties are better than that of pure molybdenum at high temperatures. Table 2 (Ti0.5 / Zr0.1) TZM alloy mechanical properties, Table 3 TZM (Ti0.5-Zr0.08) the tensile strength and elongation at high temperatures. 2) TZM alloy (molybdenum zirconium-titanium alloy) also has good weldability, the material can be well H11 steel welding. Meanwhile TZM alloy is resistant to liquid metals such as Zn corrosion. It is cold-worked by conventional methods. In the case of cooling lubricants available cemented carbide or high speed steel cutting tools for machining. TZM alloy (molybdenum zirconium-titanium alloy) and physical properties of pure molybdenum compared as follows: Material density /g•cm-3 Melting point /℃ Boiling point /℃ TZM alloy (Ti0.5/Zr0.1) 10.22 2617 4612 Mo 10.29 2610 5560 Mechanical Properties of TZM alloy (molybdenum zirconium-titanium alloy) (ri0.5 / Zr0.1) as follows: Mechanical Properties Elongation (%) elasticity modulus GPa Tensile strength Mpa yield strength Mpa fracture toughness MP•m1/2) Value <20 320 685 560-1150 5.8-29.6 TZM alloy (molybdenum zirconium-titanium alloy) high-temperature tensile strength and elongation: Temperature tensile strength(Mpa) Elongation RT 1140-1210 7.5-13.0 1000 700-720 5.2 1200 320-360 9.0 1300 190-210 11.5-13.5 1400 140-170 11-16 TZM alloy (molybdenum zirconium-titanium alloy) thermal performance and electrical properties: Performance coefficient of thermal expansion /K-1(20~100℃) thermal conductivity W/m•K Using maximum temperature in air ℃ ResistivityΩ•m Value 5.3X10-6 126 400 (5.3~5.5)X10-8 Minimum Order: 1 bags Contact:
Phone: Fax: Email: Luoyang Kekai Tungsten & Molybdenum Technology Co.
No. 2, dongmagou Industrial Park, South Wuhan road, Jianxi District, Luoyang City 471000 China 6/22/22 7:57 GMT
molybdenum rod
Application: Is widely used in making all kinds of electrodes, heating element, and resistance to high temperature structure parts is deep processing of high quality raw materials. Specification: 1. Product name: Molybdenum rod, 2. Standard: ASTM B387 3. Material: Mo >99.95% 4. Density: 9.8 ~ 10.2g/cc 5. Dimension: Diameter2-300mm 6. Surface Finish: 1)Black Surface - Surface is "as swaged" or "as drawn"; retaining a coating of processing lubricants and oxides. 2)Cleaned - Surface is chemically cleaned to remove all lubricants and oxides. 3)Shiny finish- Surface is lathe shinny or polished. 7. Molybdenum rod is manufactured as random length pieces or cut to customers' desired lengths in diameters ranging from 0.080 inches to 6.00 inches. Please view Molybdenum Rod to see our standard sizes of round bar. Below are most of the standard sizes of our molybdenum rectangular bars. If you do not see the size of molybdenum rod that you require, please feel free to contact us. Minimum Order: 1 bags Contact:
Phone: Fax: Email: Luoyang Kekai Tungsten & Molybdenum Technology Co.
No. 2, dongmagou Industrial Park, South Wuhan road, Jianxi District, Luoyang City 471000 China 6/15/22 10:53 GMT
DELLOK Solid Extruded Serrated Alu1050 Heat Exchanger Fin Tube Thick 0.4mm
Solid Extruded Serrated Alu1050 Heat Exchanger Fin Tube Thick 0.4mm Serrated Extruded Heat Exchanger aluminum Fin Tube , A179 seamless Carbon Steel tubes Manufacturing Process A smooth core tube is inserted into an aluminum sleeve and then the fins are extruded out of the aluminum sleeve. The fins are solid plain or serrated into 12,16 or 24 segments or as your design. Both plain ends with appr. 10mm~50mm and gaps (Unfinned Section) in the middle. Both bare ends of Bimetallic Finned Tubes shall be Zinc or Aluminum that metallized applied by an electro spray arc system coating on surface, it suits to various areas such as Heat exchangers units for power plant(electric, nuclear, thermal and geothermal power plants); High corrosive systems (condensers, evaporators, sea water desalinations, fertilizing, urea systems, ammonia, gas, corrosive acids); The petroleum, chemical and petrochemical industries; The food processing and refrigeration industries; Natural gas treatment; General specifications of Extruded Fin Tubes Tube OD : 50.8mm(2'') max. Tube Length : No limit Fin Height : 16 mm max. Fin Thickness: appr. 0.4mm Fin Pitch : 1.5mm min. General extrusion production capacity Extrusion Facility: 10 finning machines. Daily capacity up to 15,000 meters. Extruded fins type: solid and serrated Accessories Tube Support Box, Clamp or Spacer Box(Materials: Aluminum, Zinc or Stainless Steel). Specifications: Extruded Bimetallic Finned Tube is combined with two different materials. Items General Materials Popular ASTM Materials Core Tube Material Any metallic materials, as carbon steel, low-alloy steel, stainless steel, brass, copper, cooper-nickel alloys, aluminum bronze, nickel alloys etc. (Core tube with extremely thin wall materials can be applied.) 1. Carbon Steel: A179, A192,SA210 Gr A1/C,A106 Gr B 2. Stainless Steel: TP304/304L,TP316/TP316L/316Ti, A789 S31803/S2205 etc... 3. Copper:UNS12200/UNS14200/UNS70600, CuNi70/30,Cu , Ni 90/10 4. Titanium: B338 Gr 2 Fins Material 1. Aluminum 2. Copper. 1. Aluminum(Alu.1100,Alu.1060,Alu.6063) 2. Copper. Contact:
Phone: Fax: Email: DELLOK TECHNOLOGY CO.,LTD
No.20 Xinghuo Road,Nanjing,Jiangsu,China Nanjing 210000 China 6/15/22 7:24 GMT
T3CA T57 T53 T61 TH415 TH550 Electrolytic Tinplate For Can Components TINPL
Tinplate T3CA T57 T53 T61 TH415 TH880 Electrolytic tinplate for Can Components Electrolytic Tin Plate English Abbreviations: SPTE . It refers to cold rolled low carbon thin steel plate or steel strip coated with commercial pure tin on both sides. Applications of Tinplate and TFS ETP is primarily used for packaging foodstuffs and beverages, but it is also used in containers for oils, grease, paints, polishes, chemicals and many other products. Aerosol containers and caps and closures are also made from ETP. TFS are most frequently used for can tops, screw and lug caps, snap and press- on closures and shallow-drawn food cans. Tinplate Components Paramenters PRODUCT Prime tinplate STANDARD BS EN 10202, DIN EN 10203, GB/T2520 , JIS G3303 MATERIAL MR SPCC Grade Prime Annealing BA,CA THICKNESS 0.18-0.45mm WIDTH 600-1050mm TEMPER T2, T2.5, T3, T3.5, T4,T5 ,DR7,DR7M,DR8 COATING: 2.8g/2.8g, 5.6g/5.6g, 2.8/5.6,2.0/2.0 gr/m² or according to customer's requirement FINISHS: . Bright,Silver,Stone, Matte PACKINGS: export packing. Or according to customer's requirements. MOQ 25 tons DELIVERY 15-30 days after payment Contact:
Phone: Fax: Email: SHANGHAI QUANYE METAL PACKAGING MATERIALS CO.,LTD
NO 406 CHUNHE ROAD YUEPU TOWN, BAOSHAN DISTRICT, SHANGHAI CHINA 200941 Shanghai 201100 China 6/15/22 3:41 GMT
ASTM 304 Stainless Round Bar , Polished Stainless Flat Bar ISO SGS Certific
Polishing 304 Stainless Steel Bar/Rod 304L cheap price polished SUS304 316 303 300 Series Stainless Steel Round Bar/Rod/Shaft Stainless steel is an alloy of Iron with a minimum of 10.5% Chromium. Chromium produces a thin layer of oxide on the surface of the steel known as the 'passive layer'. This prevents any further corrosion of the surface. Increasing the amount of Chromium gives an increased resistance to corrosion. Surface Surface finish Characteristics and application 2B The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. No.1 Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc. No.4 Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. HL Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. BA Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. 8K The product have excellent brightness and prefer reflexivity can to be the mirror. Contact:
Phone: Fax: Email: Jiangsu Huyi Metal Material Co., LTD
Room 104, Building A, No. 7 Tangnongshi Road, Northeast of Xishan District, Wuxi City Wuxi 214000 China 6/9/22 8:53 GMT
Adapter Nipple Coupling Brass Tube Fitting 1/2 Inch NPT X 1/2 Inch NPT
Product Features This pipe fitting can apply to water,air,gas,oil and fuel. Hex nipple for connecting two threaded pipes or fittings. Material: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Contact:
Phone: Fax: Email: Yuhuan Success Metal Product Co.,Ltd
Qiaqiu Industrial Park, Qinggang Town,Yuhuan City,Taizhou City,Zhejiang Province,China Taizhou 318000 China 6/8/22 8:06 GMT
TZM tray, TZM charge carrier used in MIM&CIM
TZM tray/boat/box can be made according to your specification or drawings. Chemical Composition: Mo 0.40-0.55% Ti 0.06-0.12% Zr 0.01-0.04%C Properties: 1.excellent high temperature strength 2.good thermal conductivity 3.high temperature resistance, not easy to deformation Length: 20mm-1000mm Width: 20mm , -250mm Wall Thickness: 0.2mm-10mm De , nsity: 10.2g/cm3 Use area 1)sintering and heat treatment furnaces. 2)Boats for annealing and sintering process 3)Used in high-temperature furnace construction and metal working. Shipment Methods: Sea or Air transportation, train or express Payment Methods: 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western Union Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China 6/8/22 8:02 GMT
TZM tray, TZM molybdenum charge carrier
TZM tray/boat/box can be made according to your specification or drawings. Chemical Composition: Mo 0.40-0.55% Ti 0.06-0.12% Zr 0.01-0.04%C Properties: 1.excellent high temperature strength 2.good thermal conductivity 3.high temperature resistance, not easy to deformation Length: 20mm-1000mm Width: 20mm , -250mm Wall Thickness: 0.2mm-10mm De , nsity: 10.2g/cm3 Use area 1)sintering and heat treatment furnaces. 2)Boats for annealing and sintering process 3)Used in high-temperature furnace construction and metal working. Shipment Methods: Sea or Air transportation, train or express Payment Methods: 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western Union Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China 6/8/22 7:56 GMT
MLR(Molybdenum Lanthanide recrystallize) boat, MoLa tray used in MIM
MLR boat/MoLa trays are made after processing molybdenum plates with cutting, folding, riveting or welding. The boat shapes can be molded according to customers' requirements, including round, rectangular, square, and trapezoidal and so on. Molybdenum boats own properties of source material - pure molybdenum, or molybdenum alloy. Chemical composition: La: 0.5-0.7% Mo: the balance 1) Length: 20mm-1000mm Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China 6/8/22 7:47 GMT
MLR tray, MoLa boat used in sintering furnace
MLR tray/MoLa boats are made after processing molybdenum plates with cutting, folding, riveting or welding. The boat shapes can be molded according to customers' requirements, including round, rectangular, square, and trapezoidal and so on. Molybdenum boats own properties of source material - pure molybdenum, or molybdenum alloy. Chemical composition: La: 0.5-0.7% Mo: the balance 1) Length: 20mm-1000mm Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China 6/8/22 7:41 GMT
molybdenum disc, Mo disk, moly ring for semiconductor
Specification: 1) Mo ≥99.95% 2) Density: ≥ 10.2g/cm3 3) Thickness: 0.1-50mm 4) Diameter:5-300mm Packing: wooden case or as your requirement Application: It is used for fabrication of sintering boats and lighting, electric vacuum devices, power semiconductor devices, heat shield and heat bodies in high temperature furnace. Shipment way: Sea or Air transportation, train or express Payment Methods: 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western Union The Services of us 1. Quality control and delivery time is strictly controlled. 2. Flexible payment terms, T/T, L/C, Paypal, West Union and so on. 3. We are professional production factory. 4. Multi-lingual sales team. 5. One-stop sourcing service. Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China 6/8/22 7:38 GMT
molybdenum disc, moly slice used in cultured diamonds
Specification: 1) Mo ≥99.95% 2) Density: ≥ 10.2g/cm3 3) Thickness: 0.1-50mm 4) Diameter:5-300mm Packing: wooden case or as your requirement Application: It is used for fabrication of sintering boats and lighting, electric vacuum devices, power semiconductor devices, heat shield and heat bodies in high temperature furnace. About Us We're professional manufacturer of molybdenum and tungsten products, MoSi2 and SiC heating element, laboratory furnace. Our products are exported to USA, Europe, Middle East and Southeast Asia, etc. We're a factory with ISO quality system certification. We can produce as per customer's request and provide products with good quality and best price! Why choose Shibo? 1. More than 15 years’ manufacturing experience, leading factory 2. Reasonable factory direct wholesale prices 3. Steady and top quality, timely delivery, reliable after-sale service Guaranteed purity: We produce molybdenum products all by ourselves – from the metal oxide right through to the finished products. As our input material, we only use the purest molybdenum oxide. This ensures that you can benefit from a very high level of material purity. Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China 6/8/22 7:35 GMT
99.95% molybdenum disk used in lab-grown diamonds
Specification: 1) Mo ≥99.95% 2) Density: ≥ 10.2g/cm3 3) Thickness: 0.1-50mm 4) Diameter:5-300mm Application: It is used for fabrication of sintering boats and lighting, electric vacuum devices, power semiconductor devices, heat shield and heat bodies in high temperature furnace. Shipment way: Sea or Air transportation, train or express Payment Methods: 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western Union The Services of us 1. Quality control and delivery time is strictly controlled. 2. Flexible payment terms, T/T, L/C, Paypal, West Union and so on. 3. We are professional production factory. 4. Multi-lingual sales team. 5. One-stop sourcing service. Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China 6/8/22 7:31 GMT
molybdenum 99.95% disc used in lab grown diamonds
Specification: 1) Mo ≥99.95% 2) Density: ≥ 10.2g/cm3 3) Thickness: 0.1-50mm 4) Diameter:5-300mm We can also produce other shape molybdenum slice according to customers requirement and drawing. Application: It is used for fabrication of sintering boats and lighting, electric vacuum devices, power semiconductor devices, heat shield and heat bodies in high temperature furnace. Shipment way: Sea or Air transportation, train or express Payment Methods: 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western Union The Services of us 1. Quality control and delivery time is strictly controlled. 2. Flexible payment terms, T/T, L/C, Paypal, West Union and so on. 3. We are professional production factory. 4. Multi-lingual sales team. 5. One-stop sourcing service. Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China 6/8/22 7:25 GMT
Molybdenum Base Plug for Piercing Mill
Dimension: Dia.20-150mm, length 300mm max Application: used for seamless tubes of stainless, alloy steel and high temperature alloy Shipment way: Sea or Air transportation, train or express Payment Methods: 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western Union The Services of us 1. Quality control and delivery time is strictly controlled. 2. Flexible payment terms, T/T, L/C, Paypal, West Union and so on. 3. We are professional production factory. 4. Multi-lingual sales team. 5. One-stop sourcing service. Minimum Order: 2 barrels Contact:
Phone: Fax: Email: Zhengzhou Shibo Nonferrous Metals Products Co., Lt
No.2 Hangzhou Road, Xushui Industry&Trade Zone Zhengzhou 450042 China SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
© 1996-2024 IMEXBB.com. All rights reserved.
|
|