Other Metal Products

Compensator is also known as expansion joint, or bellows expansion joint. The utility model is composed of a bellows (an elastic element) constituting the main body of the bellows and accessories such as an end pipe, a bracket, a flange, a conduit, etc. The utility model belongs to a compensation element. The effective expansion deformation of bellows is used to absorb the size changes of pipelines, conduits and containers caused by thermal expansion and cold contraction, or to compensate the axial, transverse and angular displacements of pipelines, conduits and containers. It can also be used for noise reduction and vibration reduction. It is widely used in modern industry. In heating, in order to prevent pipeline deformation or damage caused by thermal elongation or thermal stress during heating, compensators need to be installed on the pipeline to compensate the thermal elongation of the pipeline, thereby reducing the stress of the pipe wall and the force acting on the valve or support structure. Advantages of the Metal compensator: The utility model has the advantages of compact structure, less space occupation and direct burying; the disadvantage is that the manufacturing is difficult, the pressure resistance is low, and the compensation ability is small. The compensation capacity is related to the outer dimensions, wall thickness and diameter of the corrugated tube: the higher the pressure, the thicker the wall, the smaller the diameter, the greater the rigidity, and the smaller the compensation capacity. Waveform compensator is generally used for applications where the nominal pressure is ≤1.0MPa and the nominal diameter is ≥150mm. It can also be used for large diameter pipes with normal pressure and low pressure. It can be used in boiler flue gas ducts up to DN4000mm.

Axial External Pressure Type Ripple Compensator Product Description TWY axial type external pressure bellows compensator is composed of bellows bearing external pressure, outer tube and end ring and other structural parts, absorbing axial displacement but can not bear the bellows pressure thrust. Purpose: the external pressure corrugated compensator mainly absorbs the axial displacement, has the advantages of large compensation amount, good heat preservation performance, and can eliminate the residual medium. Model: Our company produces DN32-DN1600 Pressure level: 0.1Mpa-2.5Mpa Connection mode: 1, flange connection type 2, connecting type Axial compensation: 18mm-400mm

Product Description Axial Expansion Joint The axial internal pressure type ripple compensator（TNY Axial Expansion Joint） is composed of a bellows and two-end connection pipes. The end connection pipe is directly welded to the pipeline, or the flange is welded and then connected to the pipeline flange. The tie rod on the compensator is mainly used for rigid support during transportation or for pre-deformation adjustment of the product. It is not a load-bearing part. This type of compensator is simple in structure and low in price, so it is preferred. The tie-down axial expansion joint consists of a single bellows element with an end connection and a tie rod system. Regardless of accessories such as liners and caps, this model can absorb all types of motion in any length of pipe, but is mainly used to absorb axial motion and a small amount of lateral motion. Common problems in choosing bellows compensator: Need to provide the manufacturer with working pressure, working temperature, size, medium, compensation amount, the use of working conditions environment, choose suitable conditions of the ripple compensator products.

Product Description The non-metallic compensator is composed of non-metallic skin, thermal insulation filler, diversion tube, pressure plate and metal structural parts. Also called non - metal flexible fabric compensator, non - metal expansion joint. It is a flexible connection used to release pipeline stress and seal gas medium. The function of non-metallic compensator: 1. Absorb the thermal expansion and contraction of the pipeline caused by the temperature difference; 2. The rigidity is low, the reverse thrust generated by the displacement is very small, and the strength requirements for the support and equipment are low; 3. Effectively isolate the vibration source equipment, prevent vibration transmission, avoid resonance, and reduce system noise; 4. The weight of the non-metallic compensator is lighter, and the larger diameter can be spliced on site. The non-metallic skin and metal components are mechanically connected. The non-metallic skin and insulation layer can be replaced easily and quickly on site, which can shorten the system downtime and reduce Maintenance costs.

Product Description The flexible fabric compensator is mainly composed of non-metallic loops, heat insulation materials and metal structural parts. The non-metallic loops are made of fiber fabric, silicone rubber, fluorine material and other flexible fabrics with good performance to be selected according to specific working conditions. The correct selection is essential to the safe use of flexible fabric compensation. Full consideration should be given to the use of flexible fabric compensator, displacement, interface conditions, etc., to determine the model, design pressure, temperature level, and interface of the fabric flexible compensator Dimensions, total product length and connection form. Fabric Expansion Joint According to the cross-section shape of the pipe, it can be divided into circular fabric compensator, rectangular fabric compensator and special-shaped fabric compensator. The fabric flexible compensator produced by Poitong, a non- metal compensator manufacturer, has the characteristics of good corrosion resistance, large displacement absorption, shock absorption and noise reduction, as well as convenient installation and maintenance.

Metal expansion joints are also called "metal corrugated compensators", which are composed of one or several bellows and metal components, which are used to absorb the dimensional changes of pipes and (or) equipment caused by thermal expansion and contraction. The role of Corrugated Expansion Joints: 1. Compensation for thermal displacement. Absorb the elongation or shortening displacement of the pipeline due to temperature changes, ensure the constant distance between the two fixed supports and release the temperature stress, so that the pipeline can operate safely. 2. Shock absorption and noise reduction. When the equipment vibrates, the expansion joint installed between the equipment and the pipeline is equivalent to a closed spring, which isolates the transmission of equipment vibration to the pipeline and reduces structural vibration and noise. 3. Protect the equipment. The installation of corrugated expansion joints at the inlet and outlet of equipment with strict requirements on forces can effectively reduce the force of the pipeline on the inlet and outlet of the equipment. 4. Improve the tightness of the flange connection. Effectively reduce the stress of flange connecting bolts and improve sealing performance.

Product Description Five elements for the selection of stainless steel metal hose: 1. Size: Nominal diameter of hose, joint type and size, hose length. 2. Pressure The actual working pressure of the hose. 3. Medium Enter the chemical properties of the medium. 4. Temperature The working temperature and range of the medium in the hose; the ambient temperature when the hose is working. At high temperatures, the maximum allowable pressure at the working temperature needs to be determined according to the temperature correction coefficient, and the correct pressure level has been determined to be selected. 5. Condition According to the condition of the hose when it is used, refer to the correct installation method of the hose, the calculation of the length of the hose in various motion states and the minimum bending radius of the hose, etc., select the hose length normally and install it correctly. In the selection of stainless steel metal hose, can choose one end of the loose flange connection mode.For the welded stainless steel metal hose, attention should be paid to protecting the surface of the metal hose during welding to avoid damage to the stainless steel metal hose caused by welding slag and arc ignition.The stainless steel metal hose shall be kept horizontal during installation and shall not be twisted.Do not have bends or dead bends.After the hydraulic test, should prevent the impact of rust block, sediment containing chloride ions deposition, resulting in corrosion and damage.

Five Bar Stainless Steel Checkered Plate offers excellent physical and chemical properties as well as functional anti-slippery properties. Stainless steel checkered plate sheet with five bar pattern has a bigger density of embossed pattern compared with single bar, two bar or three bar designs, hence, this kind of checkered ss plate offers superior anti skidding force over checkered plates with less bar number pattern. Stainless steel checkered plate five bar sheets are mainly used for food industry equipment, ordinary chemical equipment, building, householdeffects, dinnerware, cupboard, water heater, bathtub and architectural designs. Features: 1. Corrosion resistance and alkaline resistance. 2. Strong. 3.Antirust 4.High temperature resistant 1000-1200 degrees. 5. A variety of patterns both for anti skidding and decorative effects. Standard followed: AISI, ASTM, JIS, SUS,GB Material: SUS304 304L 316 316L 317 317L 309S 310 430, etc. Plate or Sheet Width: 1219mm,1250mm,1500mm,2000mm or as request Plate or sheet thickness: 0,3mm-12mm Length: 2000mm,2438mm,3000mm,6000mm or as request

Manufacturers in Connecticut are leaders in making vital products in the industry, such as jet engines, helicopters, and submarines. And, thanks to recent advancements in technology, gone are the days of gritty factory life. Workers today use their machining skills in a clean, professional setting with advanced and cutting-edge technology. name material Metal: Aluminum, Brass, Bronze, Copper, Hardened Metals,Titanium, Stainless steel Steel, Brass,copper,iron, zinc,exotic,alloy,carbon stee, etc processing type turning, milling, machining, Grinding, drilling,polishing,Boring,wire cutting lathing ,laser welding,forging die,fabrication capabilities 10000pcs/mponth surface Powder Coated, (Ordinary & Hard) Anodized, Electropolished & Polished, Plating, Bead Blasted, Heat treatment, Passivate, Black oxidate, Brushing, Laser engraving application oil gas;military parts;Mining Equipment;Food Processing Machinery,energy;tool¨exotic;aeromet; Iron Casting Turbine;Alloy Steel Shaft;wind turbine;Aviation;areospace;repair;hydro-electiric turbine;transportation Tolerance 0.001mm, specail area 0.0001mm Roughness Ra 0.1-3.2 File Formats PRO/Engineer, Auto CAD(DXF,DWG), Solid Works , UG, CAD / CAM / CAE, PDF,TIF etc. Logo:Accept Custom Logo accepted OEM/ODM OEM ODM Non-standard Processing Hardness commissioning As required Torque As required Mechanical properties As required Tensile strength As required Flaw detection As required length 17 meters weight 20 ton diameter 6 meters Est. Time 15 days Warranty 3 years Machinery Test Report provided Standard non standard test equipment CMM;Tool microscope;multi-joint arm;Automatic height gauge;Manual height gauge;Dial gauge;Marble platform;Roughness measurement. MOQ 1pcs port shanghai Packaging Details Paper, EPE Foam, poly bag, pp bag packaged for protecting products. Standard carton boxes or wooden boxes.We also can pack and ship according to customer's specific requirements QC system 100% inspection before shipment

1. Product parameters Grade Fe max O max N max C max H max Pd Al V Mo Ni Elong'n Σb (Mpa) σr0.2 (Mpa) No wt% wt% wt% wt% wt% wt% wt% wt% wt% wt% % MPa MPa Grade 1 0.2 0.18 0.03 0.1 0.015 24 240 140 Grade 2 0.3 0.25 0.03 0.1 0.015 20 400 275 Grade 5 0.4 0.2 0.05 0.1 0.015 5.5-6.7 3.5-4.5 10 895 828 Grade 7 0.3 0.25 0.03 0.1 0.015 0,12-0,25 20 400 275 Grade 12 0.3 0.25 0.03 0.1 0.015 0.3 0.8 18 460 300

planar targer and rotary target as per your request.

Minimum Order: 1 bags

Malleable iron pipe fittings: Union Conial Fig 340 NPT/BSP GALVANIZED/ BALACK Type: Union Galvanized/Black Malleable Iron Pipe Fittings Standard Specification Standard American Class 150 Brithish Standard European   ANSI/ASME B 16.3     Dimention ANSI/ASME B 16.14 KSB 1531 EN 10242   ANSI/ASME B 16.39     Threads ANSI/ASME B1.20.1 BS 21 ISO 7-1     BS 2779 ISO 228-1 Material ASTM A-197 BS EN 1562 EN1562 Zinc Coating ASTM A-153 BS 143&1256 EN10242 Reinforcement Banded Banded Beaded Size: 1/4”---6” Threaded Standard: BS / NPT/DIN Surface: Hot dipped galvanized, Toast galvanized, Black Usage: Fire Protection (Fire Fighting), plumbing, infrastructure construction, decoration, etc. Tensile Strength: ≥33 KG/MM2 Elongation: ≥8% Hydness: ＜HB163 Hydraulic Test Pressure: 25 KG/MM2 Working Pressure: 16 KG/MM2 Packing: Carton/ Bags /Pallet Delivery: 45 days after the payment Payment: TT, LC, etc.

Type: Elbow Size: 1/4”---6” Threaded Standard: BS / NPT/DIN Surface: Hot dipped galvanized, Toast galvanized, Black Usage: Fire Protection (Fire Fighting), plumbing, infrastructure construction, decoration, etc. Tensile Strength: ≥33 KG/MM2 Elongation: ≥8% Hydness: ＜HB163 Hydraulic Test Pressure: 25 KG/MM2 Working Pressure: 16 KG/MM2 Packing: Carton/ Bags /Pallet Delivery: 45 days after the payment Payment: TT, LC, etc. Producing Process: Melting the raw materials with sand core to form a primary casting, and then put into the annealing furnace annealing. After reforming .flating .sand blasting then picking the casting. the blank is galvanized, next making the threa and cleaned with cutting liquid for packing, and finally loading. Our products are mainly used in water systems, petrochemical systems, gas systems, and water heating systems. At present, according to the product design standards, our Malleable iron pipe fittings are divided into three series: banded, beaded and BS with plain. According to the different appearance treatment processes, they can be divided into three series: Black, hot-dipped galvanized, and toast galvanized. Therefore, for the same kind of products, we can provide customers with different choices.

Tin ingot supplier Product ingredients: Sn99.99 Working temperature: 265-275℃ Packing: net weight 25±1.5kg per ingot, bundled with galvanized steel strips, 40 ingots per bundle, net weight 1000±30kg Specifications: 400cmX100cmX100cm Origin: China Tin Ingot Application： (1) For the manufacture of tin-plated iron (tinplate); (2) Used to make brazing solder; (3) The electronic industry is used for tin plating on the surface of wires and electronic components and lead parts (4) For the manufacture of tin bronze. Tin is malleable and has good plasticity. Pure tin reacts slowly with weak organic acids and has good corrosion resistance. Even if it is corroded, the resulting compounds are generally non-toxic. Therefore, a large number of tinplates are produced by hot-dip tinning, which are used in anti-corrosion or food industry. Tin-based bearing alloy (Babbitt) is an excellent wear-resistant material, it has a low coefficient of friction and good toughness, thermal conductivity and corrosion resistance. Tin can also be configured into fusible alloys, solder, printed alloys, tin bronze, and tin brass. Tin-containing zirconium-based alloys are used as nuclear fuel packaging materials in the atomic energy industry; tin-containing titanium-based alloys are used in aviation, shipbuilding, atomic energy, chemical and nuclear medical equipment and other industrial sectors. Tin-niobium intermetallic compounds can be used as superconductors. The traditional Chinese medicine compounds of tin are tin dioxide, tin tetrachloride and organic compounds of tin, which are respectively used as raw materials for ceramic glazes, coal dyes for printing and dyeing silk fabrics, as well as insecticides, antifouling agents, wood preservatives and flame arresters. https://www.star-sn.com/product/tin_ingot_supplier

Minimum Order: 1 bags