Minerals & Metals

Gas Shielded Welding Wire Specification： ISO G42 4 M21 3Si1 AWS ER70S-6 GB ER50-6 Shieding Gas： CO2 or 80%Ar+20%CO2 XINYU Gas Welding Wire Description Characteristics： (1) This product is the general MAG / CO2 welding wire and suitable for all- position welding (2) The wire have stable arc at low currents , less sparks and splashing, and adapt to larger current range Precautions： 1. Pay attention to the gas purity and mixture ratio.  2. Keep the gas flow rate between 15 ~ 25 L / Min.  3. The extension length keep between 15 to 20mm   4. Clear the oil, rust, moisture, dust and other debris of the welded parts.  5. Keep the welding hood clean and unobstructed. One chemical composition of the weld metal sample  (wt%) （Shielding Gas:CO2） C Si Mn P S 0.08 0.68 1.32 0.011 0.008 Hebei XINYU Welding Co., Ltd, mainly produces high-strength steel welding wire, Non-copper-coated solid wire, submerged arc & stainless steel welding wire. Our Welding wires and welding wire equipment are exported to the USA, Italy, Brazil, Russia and India, etc. All products have passed ISO 9001-2015 quality system certification and CE certification.If you are interested, please click here to contact us immediately.

Minimum Order: 10 long tons

Specification AWS ER120S-G ISO G89 4 M21 ZMn3Ni2CrMo G B ER83-G Shielding Gas 80%Ar + 20%CO2 XINYU High strength steel welding wire Description Feature & Use： ( 1 ) For 890MPa high tensile steel, containing Ni，Cr，Mo etc，excellent mechanical properties. ( 2 ) Adapt to low-alloyed steel structures according to 890 MPa. Notice： 1. Please use specialized welding gas, eg: purity of CO2≥99.5%，H2O≤0.005%， Ar≥99.99%.

Minimum Order: 10 long tons

=Specification ISO G62 4 M21 ZMn3Cr AWS ER100S-G GB ER69-G Shieding Gas 80%Ar+ 20%CO2 Product Description Characteristics： (1) This product is the 700MPa grade high strength steel wire, it has very good mechanical properties.  (2) With the mixed shielding gas,XINYU Gas Shielded Welding Wire can be used to welding the important low alloy structures, and widely used in the welding of scraper chain and hydraulic supports in mining machinery Precautions： 1. Pay attention to the gas purity and mixture ratio.  2. Keep the gas flow rate between 15 ~ 25 L / Min.  3. The extension length keep between 15 to 20mm   4. Clear the oil, rust, moisture, dust and other debris of the welded parts.  5. Keep the welding hood clean and unobstructed. One chemical composition of the weld metal sample (wt%)  （Shielding Gas:80%Ar+20%CO2） C Si Mn P S Else 0.08 0.60 1.45 0.010 0.005 -- One mechanical properties of the weld metal sample  （Shielding Gas:80%Ar+20%CO2） Tensild Strength      MPa Yield Strength      MPa Elongation      % Impact Energy Value ℃ J 750 655 23 -20 94 The applicable current range and specifications of the product (DC+): Dia (mm) 0.8 0.9 1.0 1.2 1.4 1.6 Current Range    (Amp) Flat welding 50 ~ 180 50 ~ 200 50 ~ 220 80 ~ 350 100 ~ 470 200 ~ 500 Vertical up welding 50 ~ 100 50 ~ 140 50 ~ 140 50 ~ 140 100 ~ 180 — Overhead welding 50 ~ 100 50 ~ 120 50 ~ 120 50 ~ 160 — — Vertical down welding 50 ~ 100 50 ~ 200 — — — — We mainly produces Welding Wire, Stainless Steel Wire, Non Copper Coated Wire. Inculding er70s 6 welding wire, er80s g welding wire.Click here to browse the website.

Minimum Order: 10 long tons

aisi 4140 Steel Structural High toughness aisi 4140 Steel Structural Bars What is AISI 4140 Steel? AISI 4140 alloy steel round bar sheet plate belongs to medium hardenability steel.AISI 4140 steel round bar has high fatigue strength and low notch sensitivity. Low-temperature impact toughness is also very high, no obvious temper brittleness. It is mainly used after quenching and tempering state. It is used to manufacture high-strength parts under impact loads and the fittings with large cross-sections and other stressed members. Such as the horizontal eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, and etc. Its equivalent grade is JIS SCM440 and DIN 1.7225. The properties and composition of 4140 steel round bar sheet plate as below. What is the application of 4140 steel? AISI 4140 steel round bar is an alloy structural steel with good strength and good comprehensive mechanical properties after heat treatment. It has good manufacturability. The maximum operating temperature is 427°C. It is used to manufacture forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, and can also be used to manufacture turbine fasteners, tool bodies, dies, brake shoes, etc. keyword   aisi 4140 Steel Structural Standard AISI/ASTM/DIN/NF/JIS/GB/BS Steel Grade AISI 4140/ASTM 4140/DIN 1.7225 /NF 40CD4 /JIS SCM440 /GB 42CrMo /BS 708M40 Chemical Compositions(%) C: 0.38-0.45   Si: 0.17-0.37  Mn: 0.50 , -0.80  P≤0.035  S ≤0.035   Cr: 0.90-1.20  Mo: 0.15-0.25 Mechanical properties Tensile strength σb (MPa): ≥1080(110) Yield strength σs (MPa): ≥930(95) Elongation δ5 (%): ≥12 Area shrinkage ψ (%): ≥45 Impact energy Akv (J): ≥63 Impact toughness value αkv (J/cm2): ≥78(8) Hardness: ≤217HB Sample size: sample blank size is 25mm Surface treatment Black/Peeling/Polishing/Machined Technique Cold/Hot rolled, Cold-Drawn or Hot Forged Heat Treatment Annealed; Quenched; Tempered Delivery Condition Hot Rolled or Forged/Peeled or Black Surface/Annealed or QT Heat treatment standard Quenching at 850℃, oil cooling; tempering at 560℃, water cooling, oil cooling Metallographic structure Tempered sorbite Test SGS/UT100%/Elements Testing Certificate SGS/ISO/Mill Certificate Delivery status Delivered in heat-treated (normalized, annealed or high temperature tempered) or unheated state Skype/Whatsapp/Wechat +86-18269260283 Company website https://steelpurchase.com/ http://www.songs , hunsteel.com/ songshunsteel41404340

Minimum Order: 1 bags

Product Features This pipe fitting can apply to water,air,gas,oil and fuel. Hex nipple for connecting two threaded pipes or fittings. Material: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. This hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.

Material SCM440 Steel Product Information 1.Describe: 4140 steel is a kind of alloy structural steel. It belongs to the steel with the American grade equivalent to the 42CrMo grade in my country. This kind of steel belongs to the medium hardenability steel with high yield, good comprehensive mechanical properties, good strength, good toughness and hardenability. High advantages, its carbon content is 0.33%-0.48%, its tensile strength is 795 MPa, and its hardness is 241HB. After heat treatment at 4140, it has good strength and good comprehensive mechanical properties, and it has good manufacturability. Fasteners, salvage tools, etc. 2.Corresponding steel number: China GB steel number 42CrMo, Germany DIN steel number 42CrMo4, Germany DIN material number 1.7225, French NF standard 40CD4/42CD4, Japanese JIS standard SCM440, British BS standard 708M40/708A42/709M40, American AISI/ASTM 4140, American SAE 4140, American UNS Standard G41400 (4140 alloy structural steel, executive standard: ASTM A29/A29M-04) 3.Application: It is used to manufacture forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, connecting rods and spring clips that are heavily loaded, and can also be used for Drill pipe joints and fishing tools for oil wells below 2000m, and can be used for molds of bending machines, etc. 4.Feature: This steel has good strength, good toughness, high hardenability, good workability, small processing deformation, quite good fatigue resistance, small deformation during quenching, and high creep strength and durable strength at high temperature. ​ We provide high-quality steel,ex-factory price, support customization, strong company and factory strength; welcome your inquiry and order;please contact us for quotes. songshunsteel41404340

Minimum Order: 2 barrels

1. Steel Grade AISI 4140/DIN 1.7225/JIS SCM440/GB 42CrMo Size & Dimension Dia:20-120mm L:2000-5800mm Surface treatment Black/Peeling/Polishing/Machined Technique Cold/Hot rolled, Cold-Drawn or Hot Forged Heat Treatment Annealed; Quenched; Tempered Delivery Condition Hot Rolled or Forged/Peeled or Black Surface/Annealed or QT Test SGS/UT100%/Elements Testing Certificate ISO/Mill Certificate AVAILABLE Steel Type Round bar/Plate 2. AISI 4140 alloy steel round bar sheet plate has high fatigue strength and low notch sensitivity. Low-temperature impact toughness is also very high, no obvious temper brittleness. It is mainly used after quenching and tempering state. It is used to manufacture high-strength parts under impact loads and the fittings with large cross-sections and other stressed members. Such as the horizontal eccentric shaft of the horizontal forging machine, the crankshaft of the forging press, and etc. And the equivalent grade for it is DIN 1.7225 and JIS SCM440. 4140 Steel properties and chemical composition as below. 3. AVAILABLE SIZE: Round bar: Diameter(mm) Max 800mm; Length(mm) Max 12000mm. Plate: Thickness(mm) Max 800mm; Width(mm) Max 2300mm; Length(mm) Max 12000mm. Condition: Cold rolled(drawn)≤50mm, Hot rolled≤12-250mm, Hot forged≥50mm.   AISI 4140/DIN 1.7225 Introduction: AISI 4140 alloy steel is chromium, molybdenum, manganese containing low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and torsional strength.   Fabrication and Heat Treatment: 1. Forging Preheat the steel carefully, then raise the temperature to 1150-1200°C for forging. Do not forge below 850°C. 2. Annealing Heat the AISI 4140 slowly to 800-850°C and allow enough time for the steel to be thoroughly heated. Cool slowly in the furnace to 480°C followed by air cooling. 3. Stress Relieving When parts are heavily machined, ground or otherwise subject to cold work, stress relieving will be beneficial prior to hardening. 4. Hardening AISI 4140 steel is usually supplied ready heat treated to 18-22HRC. If further heat treatment is required annealed AISI 4140 should be heated slowly to 840- 875°C and after adequate soaking at this temperature quench in oil. Temper as soon as the tools reach room temperature. 5. Tempering Heat the AISI 4140 carefully to a suitable temperature selected by reference to a tempering chart or table (usually between 550-700°C, soak at the temperature for 2 hours per 25mm of ruling section, then allow to cool in air. Tempering between 250-375°C is not advised as tempering within this range will seriously reduce the impact value. 6. Surface Treatment Plate: Origin Black, Orign cold rolled bright, Machined, Grinded Bar: Origin Black, Orign cold rolled(drawn) bright, Turned, Peeled, Grinded ABOUT US: We specialize in 4140 and 4340 steels, which are versatile and have many advantages for a variety of industrial applications. Knowing the differences between them will help you choose the one that best suits your needs.   ​Our advantages: Focus on the steel industry for more than ten years, strong factories, professional services, ensure quality, customize according to customer requirements, factory prices, fast transportation,Good after-sales service, pleasant cooperation, high repurchase rate and so on. We offer a wide range of information and high quality steel products on 4140 and 4340 steel, for more information on our 4140 and 4340 steel products, please contact us today. To discuss pricing details, please request a quote. CONTACT US: MiKi Zhuo E-mail:jacklu@songshunsteel.com Skype/W , hatsapp/Wechat:+86-18269260283 ADD:No.4 Dongda Street, Shatou, Changan Town, Dongguan City, Guangdong Province, P.R.C China For more 4140 steel product information, please click this link: https://steelpurchase.com/aisi-4140-steel , -round-bar-sheet-plate-jis-scm440-din- 1-7225/< , br>songshunsteel41404340

Minimum Order: 2 barrels

4140 steel, this steel has good workability, small processing deformation, good fatigue resistance, is a medium hardenability steel, 4140 has good strength and good comprehensive mechanical properties after heat treatment, good workability, yield High. The maximum use temperature is 427 degrees Celsius. 4140 strength, high hardenability, good toughness, small deformation during quenching, high creep strength and lasting strength at high temperature. It is used to manufacture forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, connecting rods and spring clips that are heavily loaded, and can also be used for Drill pipe joints and fishing tools for oil wells below 2000m, and can be used for molds of bending machines. ASTM 4140 Surface Treatment and Heat Treatment 1.Surface Treatment Plate:Origin Black,Orign cold rolled bright, Machined,Grinded Bar:Origin Black,Orign cold rolled(drawn) bright,Turned,Peeled,Grinded Heat treatment specification Heat treatment standard: quenching at 850℃, oil cooling; tempering at 560℃, water cooling, oil cooling; 4140 Steel Applications It is used to manufacture forgings that require higher strength and larger quenched and tempered sections than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, connecting rods and spring clips that are heavily loaded, and can also be used for Drill pipe joints and fishing tools for oil wells below 2000m, and can be used for molds of bending machines, etc.                     How is SAE 4140 steel tested? Our AISI 4140 steel round bar and steel plate composition detection is carried out by a spectrometer, which is fast, accurate and efficient in detection; hardness is tested by a hardness tester, The hardness tester is based on the Leeb hardness measurement principle, which can easily and quickly measure a variety of metal materials. While displaying the hardness measurement value immediately, it can be freely converted between different hardness scales, and the tolerance limit can be set in advance, and it will automatically alarm when it exceeds the range. 1. Measuring range: (170-960)HLD,(17-68.5)HRC,(19-651)HB,(80-976)HV,(3 , 0-100)HS, (59-85)HRA(13-100 )HRB 2. Measurement direction: support 360° (vertical down, oblique down, horizontal, oblique up, vertical up) 3. Hardness scale: Richter (HL), Brinell (HB), Rockwell B (HRB), Rockwell C (HRC), Rockwell A (HRA), Vickers (HV), Shore (HS) 4. Display: quarter dot matrix LCD 5. Data storage: maximum 500 groups (impact times 32 to 1) 6. Working voltage: 3V (2 AA size alkaline batteries connected in series) 7. Continuous working time: about 100 hours (when the backlight is not turned on) FAQ Q:Are you a factory or a trading company? A: The fact is that we are a company. We have own factory and several warehouses. Under the trend of globalization of the world, we established a professional foreign trade department to change the world. Q: What is your delivery date? A: The delivery date is about 10-30 days after receipt of payment. Q: Can I get some samples? A: We are honored to offer you samples. Q: What port do you usually ship from? A: We have 3 common ports,Tianjin, Shanghai and Shen. Q: What is the payment terms? A: T/T is our priority, L/C is also OK for us. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!! E-mail:jacklu@songshunsteel.com Skype , /Whatsapp/Wechat:+86-18269260283 Songshun Tiktok:mikizhuo Songshun Facebook:Songshun Steel Songshun YouTube:MiKi Zhuo Songshun Company Website:https://steelpurchase.com/ http://www.songshunsteel.com/ songshunsteel , 41404340

Minimum Order: 1 bags

1.4140 steel alloy round bar product details ·keyword:4140 steel alloy round bar ·Usage:It is used to manufacture forgings that require higher strength and larger quenched and tempered sections than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, connecting rods and spring clips that are heavily loaded, and can also be used for Drill pipe joints and fishing tools for oil wells below 2000m, and can be used for molds of bending machines, etc. · Other Steel Types:5140 /4140 / 4340 / 4142 / 15CrMo / 6150 / 38CrMoAI / 8620 ..... ·Serve:OEM/ODM,Sample free and 24 hours online ·Delivery status:With heat treatment (normalized, annealed or high temperature tempered) or without heat treatment Goods, the delivery status should be specified in the contract 2.SAE 4140 Steel Equivalent Steel Grade  China GB steel number 42CrMo, Germany DIN steel number 42CrMo4, Germany DIN material number 1.7225, French NF standard 40CD4/42CD4, Japanese JIS standard SCM440, British BS standard 708M40/708A42/709M40, American AISI/ASTM 4140, American SAE 4140, American UNS Standard G41400 (4140 alloy structural steel, executive standard: ASTM A29/A29M-04) 3.AISI 4140 Chemical Composition C:0.38-0.45 Si:0.17-0.37 S：≤0.035 P:≤0.035 Mn:0.50-0.80 Cr:0.90-1.20 Mo:0.15-0.25 Ni:≤0.30 Cu≤0.30 4.SAE AISI 4140 steel heat treatment （1）Machinability In the annealed condition, the alloyed tool steel 1.7225 has good machinability （2）Training DIN 1.7225 steel has high ductility. It can be shaped in the annealed state using conventional techniques. More pressure or force is required to form because it is tougher than plain carbon steels. （3）Welding Alloy steel 1.7225 can be welded with all advanced techniques. However, the mechanical properties will be affected if it is welded in the heat treated condition and post-weld heat treatment should be performed. （4）Heat treatment 1.7225 tool steel is heated to 845°C (1550°F) and then oil quenched. Before hardening, it can be normalized by long heating to 913 °C (1675 °F) and then air cooling. （5）Forge It is forged at 926 to 1205 °C （6）Hot working 4140 steel can be hot worked at 816 to 1038 °C (1500 to 1900 °F). （7）Cold working 1.7225 steel can be cold worked in the annealed condition using conventional methods. （8）Glow Heat it to 800 – 850 °C, hold until the temperature is uniform throughout the section and cool in the kiln. （9）Normalize Heat the 1.7225 alloy steel to 870-900℃, hold until the temperature is uniform throughout the section, soak for 10-15 minutes, and cool in still air. （10）Cranking DIN 1.7225 steel can be tempered at 205 to 649 °C (400 to 1200 °F) depending on the desired hardness. The hardness of the steel can be increased if the tempering temperature is lower. For example, a tensile strength of 225 ksi can be achieved by annealing at 316 °C (600 °F), and a tensile strength of 130 ksi can be achieved by annealing at 538 °C (1000 °F). （11）Hardening Alloy steel according to DIN 1.7225 can be hardened by cold forming or heating and quenching. What is the application of 4140 steel? AISI 4140 steel round bar is an alloy structural steel with good strength and good comprehensive mechanical properties after heat treatment. It has good manufacturability. The maximum operating temperature is 427°C. It is used to manufacture forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, and can also be used to manufacture turbine fasteners, tool bodies, dies, brake shoes, etc. Dongguan Songshun Mould Steel Co., Ltd. is an Indusrtial and trading company with 2 warehouses that manufactures good & high quality kinds of steels starting from 2012. The company provides the customized products and OEM service. What´s more, we keep the mass stock of over 20000 tons. In those years, we offer a wide range of steels to our customers from all over the world. And we enjoy high praise among them. Contact us Feel free to contact us,we are glad to serve for you. Songshun Always Open the Door for You. MiKi Zhuo Skype/Whatsapp/Wechat:+86-18269260283 A , DD:No.4 Dongda Street, Shatou, Changan Town, Dongguan City, Guangdong Province, P.R.C China For more 4140 steel product information, please click this link: https://steelpurchase.com/4140-scm440-172 , 25-steel/ songshunsteel41404340

Minimum Order: 2 barrels

4140 steel is a kind of alloy structural steel. It belongs to the steel with the American grade equivalent to the 42CrMo grade in my country. This kind of steel belongs to the medium hardenability steel with high yield, good comprehensive mechanical properties, good strength, good toughness and hardenability. High advantages, its carbon content is 0.33%-0.48%, its tensile strength is 795 MPa, and its hardness is 241HB. After heat treatment at 4140, it has good strength and good comprehensive mechanical properties, and it has good manufacturability. Fasteners, salvage tools, etc. China GB steel number 42CrMo, Germany DIN steel number 42CrMo4, Germany DIN material number 1.7225, French NF standard 40CD4/42CD4, Japanese JIS standard SCM440, British BS standard 708M40/708A42/709M40, American AISI/ASTM 4140, American SAE 4140, American UNS Standard G41400 (4140 alloy structural steel, executive standard: ASTM A29/A29M-04) Mechanical properties: Tensile strength σb (MPa): ≥1080(110) Yield strength σs (MPa): ≥930(95) Elongation δ5 (%): ≥12 Area shrinkage ψ (%): ≥45 Impact energy Akv (J): ≥63 Impact toughness value αkv (J/cm2): ≥78(8) Hardness: ≤217HB Sample size: sample blank size is 25mm Established in 2009,Songshun Steel supplies a wide range of carbon, alloy and tool steel products, including high speed tool steel, cold work tool steel, hot work tool steel, plastic mould steel, engineering steel and machine structural steel etc. After more than 10 years development and growing, Songshun Steel becomes one comprehensive special steel factory, stockist and exporter. Combined with experienced exporting team and professional technical knowledge, Songshun Steel offers both technical advice and support, as well as global professional steel solution and service. Due to satisfactory reliable quality and professional service, Songshun expands our market worldwide, such as Colombia, Chile, Spain, Turkey, Iran, Vietnam, Malaysia ,UAE, Canada, Brazil, Mexico and so on. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!! E-mail:jacklu@songshunsteel.com Skype , /Whatsapp/Wechat:+86-18269260283 Songshun Tiktok:mikizhuo Songshun Facebook:Songshun Steel Songshun YouTube:MiKi Zhuo Songshun Company Website:https://steelpurchase.com/ http://www.songshunsteel.com/ songshunsteel , 41404340

Minimum Order: 1 bags

1050 aluminum coil is a product in the pure aluminum series. 1050 aluminum coil has the characteristics of high plasticity, corrosion resistance, good electrical conductivity and thermal conductivity, but low strength, and can accept contact welding and gas welding. The production process is relatively simple and the price is relatively cheap. It is a series commonly used in conventional industries. Aluminum Coil Manufacturing Aluminum Sheet Coil 1100 1050 1060 Alloy Aluminum Coils for Can Yongsheng's 1060 aluminum coil has mature technology, good quality and low price. 1060 aluminum coil has a flat surface, high cleanliness, suitable for polymer welding, and has good product elongation and tensile strength, which can meet conventional processing requirements (stamping, stretching) and high formability. It is widely used in power battery soft connection , Aluminum- plastic panels, lamps, signs and other fields. Yongsheng 1000 Series Aluminum Coil Advantages 1- It has high plasticity, corrosion resistance, good electrical and thermal conductivity; 2- Long service life, mature processing technology, low cost and high recovery value; 3-Have a hot continuous rolling production line, which provides a solid foundation for the large-scale production of aluminum coils. Product Name Aluminum Coil Alloy/Grade 1000, 2000, 3000, 5000, 6000, 7000, 8000 Series Temper O-H112,T3-T8,T351-T851 Thic , kness 0.1mm-8mm Width 3mm-2600mm Appli , cation Industry,Decoration,Building,Packing,Pre , ssing,Etc. Surface treatment Mill Finish,Coated,Powder Coated,Anodized,Polished mirror,Embossed,Etc. Coil ID As per your requirements Tolerances As per your requirements Delivery time 7-30 days after order confirmation MOQ 1 tons Price terms FOB, CIF, CFR, CNF, Etc. Payment terms L/C,D/A,D/P,T/T , West Union, Money Gram, Etc.

TZM tray/boat/box can be made according to your specification or drawings. Chemical Composition: Mo 0.40-0.55% Ti 0.06-0.12% Zr 0.01-0.04%C Properties: 1.excellent high temperature strength 2.good thermal conductivity 3.high temperature resistance, not easy to deformation Length:  20mm-1000mm  Width:  20mm , -250mm  Wall Thickness:  0.2mm-10mm  De , nsity:  10.2g/cm3  Use area 1)sintering and heat treatment furnaces. 2)Boats for annealing and sintering process 3)Used in high-temperature furnace construction and metal working. Shipment Methods: Sea or Air transportation, train or express Payment Methods: 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western Union

Minimum Order: 2 barrels

TZM tray/boat/box can be made according to your specification or drawings. Chemical Composition: Mo 0.40-0.55% Ti 0.06-0.12% Zr 0.01-0.04%C Properties: 1.excellent high temperature strength 2.good thermal conductivity 3.high temperature resistance, not easy to deformation Length:  20mm-1000mm  Width:  20mm , -250mm  Wall Thickness:  0.2mm-10mm  De , nsity:  10.2g/cm3  Use area 1)sintering and heat treatment furnaces. 2)Boats for annealing and sintering process 3)Used in high-temperature furnace construction and metal working. Shipment Methods: Sea or Air transportation, train or express Payment Methods: 1) L/C ; 2) T/T ; 3) Paypal ; 4) Money Gram ; 5) Western Union

Minimum Order: 2 barrels

MLR boat/MoLa trays are made after processing molybdenum plates with cutting, folding, riveting or welding. The boat shapes can be molded according to customers' requirements, including round, rectangular, square, and trapezoidal and so on. Molybdenum boats own properties of source material - pure molybdenum, or molybdenum alloy. Chemical composition: La: 0.5-0.7% Mo: the balance 1) Length:  20mm-1000mm   

Minimum Order: 2 barrels