Minerals & Metals

Stainless Steel Welded Wire Mesh, Rolls and Panels Stainless steel welded wire mesh is a durable and strong hardware mesh with square hole or rectangular hole structure. Supplied in rolls or flat panels. Formed with stainless wire of same diameter in both directions welded together a flat surface matting or fabric with uniform openings. The material wire is rust resistant, corrosion resistant that can be exposed to corrosion for a long time. Because of its natural properties, stainless steel welded wire mesh need no additional finish procedures to protect it. Material: Mainly stainless steel wires. Mild steel, bright annealed mild steel, galvanized steel material can be also applied. Features: Compared with woven wire meshes, stainless steel welded mesh has many good properties, such as strong structure, anti-corrosion and anti-rust, it is not easy to loosen even be cut into parts or exerted force on the parts. Application: Welded wire fabric can be widely used in fishery industry, food drying, marine use, rodent proofing, welded wire mesh cages for animals, construction, decoration, mesh fences, welded mesh shelves, decks, racks, and so on. It also serve as guards in buildings and factories, as animal enclosure and wire mesh fences in agriculture; serves as tree guards in horticulture industry. Roll size : Roll Width: 24inch, 36inch, 1metre, 48inch, or 72inch. Roll Length: 100 feet or 150 feet. Note: other roll width or roll length can be made according to request. Stainless Steel Welded Wire Mesh, 304 and 316 Grade Stainless Steel Welded Wire Mesh Grade 304 Mesh Size 25x25 (1"x1") Wire Diameter 3mm (11 SWG) Welded Stainless Steel 316 Wire Mesh Open mesh 1/2 " Wire dia.2mm Roll size: 5ft widthx500 meters Stainless Steel Wire Mesh Panels with Free Wire Above the Panels SS Wire Mesh Free wire above weld mesh panels for tying Horizontal wire: 2.5mm diameter Vertical wire: 3.0mm diameter Stainless Steel Wire Mesh Welded Panels with Free Wire Tying of Adjecent SS Welded Wire Mesh with 14 SWG SS Wire SS Wire Mesh, Welded SS Wire Mesh As per drawing. 2.5 mm Dia Horizontal Wire: Spacing 200mm 3mm Dia Vertical Wire: Spacing 100 mm Free Wire above weld mesh Panel - 1700mm

Stainless Steel Square Hole Woven Wire Mesh Weaving Method: Stainless Steel Wire Mesh can be divided into Square Opening Stainless Wire Mesh and Dutch woven mesh according to weaving types and the aperture shape differences. Square hole wire mesh can be achieved by either Plain weave or Twill weave method. Square mesh is mainly used as insect screening material or industrial filter media, sifting screen, etc. Materials: Stainless steel wire 302, 304, 304L, 316, etc. Galvanized wire, brass wire or copper wire can also be woven into square wire mesh products. Standard mesh counts per inch for stainless steel wire mesh with square opening: 2mesh / 3mesh / 4mesh / 7mesh / 10mesh / 12mesh / 16mesh / 18mesh / 20mesh / 24mesh / 30mesh / 35mesh / 40mesh / 50mesh / 60mesh / 70mesh / 80mesh / 90mesh / 100mesh / 120mesh / 150mesh / 180mesh / 200mesh / 250mesh / 300mesh / 325mesh / 350mesh / 400mesh / 450mesh / 500mesh Technical Note: Standard width of stainless steel wire mesh: 1m or 48"; extra roll width of 4m also available. Standard roll length: 30m or 100'.

Stainless Steel Wire Mesh Stainless steel wire mesh refers to the woven wire fabric made by weaving looms from first class stainless steel material in SUS/AISI 201, 202, 302, 304, 310, 310S, 316, 316L, etc. This page provides information on wire materials applied for weaving, properties, and specification of most popular specifications. Wire Mesh Weaving IllustrationMajor Wire Materials and Introduction: Stainless steel AISI 304, 304 L, 316 and 316 L AISI 304: This type is the basic stainless alloy mostly commonly used for wire cloth/mesh weaving. It offers excellent property against rusting and oxidation. AISI 304 L: Materials similar to 304, with reduced carbon content for better weaving. SS Mesh Cut Disc AISI 316: Stainless stabilized by the addition of 2% molydbenum. It has better resistance to pitting corrosion than the other chromium-nickel stainless steels and high strength at elevated temperatures. Other mechanical properties and fabricating characteristics are similar to AISI304. Wire cloth woven of T-316 has extensive use in chemical processing when better corrosion resistance is required than the regular chromium-nickel types. AISI 316 L: Very similar to AISI316, yet with the reduced carbon content for better wire cloth weaving.

Stainless Steel Wire: Round Wire, Fine Wire, Stainless Steel Fiber We produce and supply stainless steel wire/fiber in complete sizes and various international standards. The fine ss wire is mainly packed in spools for easy applying to the weaving looms. Tejido supplies fine ss weaving wire, fine wire, also stainless steel coarse wire for welded stainless mesh and crimped mesh manufacture. Material: AISI304 304L 316 316L, etc Sizes: Wire diameter range from 5mm to 0.025mm Variety: Hard wire, soft wire, coil wire, spool wire. Weaving Stainless Steel Fine Wire Specifications: 0.018 to 0.9mm. Custom orders can be accepted. Features: High strength, excellent anti-corrosion property, good preventing and anti-radiating property. Applications: Weaving of wire mesh and other industrial uses.

430 stainless steel wire mesh is a kind of magnetic ss wire mesh offering better thermal conductive performance than austenitic stainless steel series material, mainly used for industrial filtering, food industry filtering, sugar filtering with a popular mesh range of 1 - 300mesh in square opening. Stainless steel 430 (1Cr17) Wire Mesh Wire diameter 0.038-2.03mm Mesh counts 1-300 mesh Surfuce: Smooth Weave: Plain weave / twill weave / dutch weave Opening: Square Features: 430 stainless steel wire mesh is magnetic; Corrosion resistant; Resistant to stress corrosion and oxidation; 430 magnetic stainless steel wire mesh has a thermal expansion coefficient smaller than austenitic ss; Resistant to thermal fatigue, with adding the stable element titanium, mechanical performance of welded parts is good. With magnetism, 410/430 stainless steel wire mesh is also called magnetic stainless steel wire mesh.

Stainless Steel Wire Mesh (SS 316) ASTM / BS / IS, 2 mesh to 500 mesh We supply to Slovenia, Indonesia, Spain, Singapore and other countires all kinds of ss mesh and filter cloth products according to the customers' requirements. Samples of 2" x 2" pieces wire meshes are provided for quality reference. Materials: SUS 316, 316L. Weaving: plain weave, twill weave, dutch. Character: Acid-resisting , alkali-resisting, heat-resisting, wear-resisting, etc. Uses: Used in mine, oil, chemical industry, food, etc. ASTM / BS / IS Standard SS Wire Mesh We supply stainless steel wire mesh (SS 316) made of material ASTM / BS / IS standard. Filter Wire Mesh Stainless Steel 316L 316L Duplex Stainless steel wire mesh filter For seawater prefilteration Slot Size: 500 microns Operation Pressure: 10 bar Stainless Steel 316 Wire Mesh, 1x10m Sheet stainless steel 316 wire mesh as bellow table Dimension (m) / Wire Diameter (mm) / Mesh

We XinBo Precision has been engaged producing and supplying all kinds of CNC Milling parts over 10 years. Our flagship products include Brackets, Covers, Housings, etc. Conforming to all customer’s prints and the tolerance standard: ISO2768m, ISO2768f. These product supports a variety of applications, including chemical equipment, automotive industry, consumer electronics, etc. Except CNC machining, we also provide one stop solutions like heat treatment, finishing, assembly and inspection. Since we have CMM, so we can do the parts with GD&T requirements, we also accept the parts with special finishing requirements, for example musk partial surface and anodize at the rest surface, or extrude and saw to get the work blank, then machining.

310 Stainless Steel Wire Mesh and 310 S- Used in Electric furnace, metallurgy, make heating elements and Resistive elements. 310 stainless steel wire mesh 310 stainless steel wire mesh offers high temperature resistance, its nominal oxidation resistance can reach 1150 C, superior over the 800 c temperature of 340 stainless steel. 310 wire mesh is commonly used in Chemicals, Oil, Aerospace, Automotive, metallurgy, and so on. 310 stainless steel mesh is commonly used as heat resistant mesh, high temperature mesh. Its high chromium content makes it resistant to oxidation when heated. The maximum safe temperature is about 2000°F. 310 ss wire cloth is also suitable for applications where a combination of corrosion and oxidation resistance, high strength, and toughness is essential. For example, 310 stainless steel wire cloth is commonly used in chemical processing equipment, heat exchangers, and oil field / refinery equipment, furnace equipment. 310S (0Cr25Ni20) Stainless Steel Wire Mesh 310S stainless steel is austenitic stainless steel. Because of the high content of chromium and nickel, 310S stainless steel wire mesh performs better oxidation and corrosion resistance than 304 in most environments. 310S stainless steel mesh contains 25% chromium and 20% nickel. The higher the percentage of chromium content, the better resistance of the ss material to high temperature. It can work continuously at a maximum temperature of 1200℃. Due to the high content of Nickel (Ni) and chromium (CR) , it has good oxidation resistance, corrosion resistance, acid and alkali resistance and high temperature resistance. 310S stainless steel wire mesh is available in both woven and welded structure. 310S stainless steel screen mesh is primarily used in power plant furnice, chemical processing equipment, oil field / refinery equipment. The following lists more industries 310S stainless steel wire mesh commonly used in.

Ferrosilicon is often used as a deoxidizer in steelmaking because silicon and oxygen are easily oxidized to form silicon dioxide. At the same time, because of the large amount of heat released during the formation of SiO2, it is also beneficial to increase the temperature of molten steel while deoxidizing. At the same time, ferrosilicon can also be used as an additive of alloy elements, and widely used in low alloy structural steel, spring steel, bearing steel, heat-resistant steel and electrical silicon steel, ferrosilicon in ferroalloy production and chemical industry, often used as reducing agent. Specifications Ferro Silicon Grade Chemical Composition(%) Si C Al P S ≥ ≤ Regulare Specs FeSi 60% 65 0.2 2.0 0.04 0.02 FeSi 72% 72 0.2 2.0 0.04 0.02 FeSi 75% 75 0.2 2.0 0.04 0.02 Low Al FeSi 75% 75 0.2 0.5 0.04 0.02

Definition Aluminum Honeycomb Panels Aerospace is a sandwich panel made with aluminum facings and high density 5.7 lbs/ft3 aluminum honeycomb core, designed for use in aircraft interiors. Structure Aluminum Skin + Aluminum Honeycomb Core + Aluminum Skin Specification: Coating PVDF Kynar500 / FEVE / PE Coating Thickness: PVDF & FEVE >25microns PE>15microns Panel Thickness 2mm, 3mm, 4mm, 5mm, 6mm upto 15mm Aluminum Skin Thickness 0.12mm, 0.15mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm Alloy 1100, 3003, 3005, 3105, 5005 Panel Width 1220mm, 1250mm, 1500mm, 1575mm, 1750mm Panel Length 2440mm, 4880mm, 5000mm, 5800mm Core LDPE core, Mineral Filled FR core WDF Processing Methods: Cutting to size Milling Drilling Joining Cut to Shape Panel folding Panel edging Inserts Painting Veneering Features: High strength-to-weight ratio Good cost effectiveness Service temperature: up to 180oF

Plexiglass Sheets Acrylic Panels Cut To Size Perspex Board Available in 1/8" Thickness Plastic FEATURES: Available in 1/8" thickness and customizable. We custom cut to size each acrylic sheet Attractive colors and patterns Lightweight and strong Higher impact resistant than glass Gloss finish Easy to handle and fabricate Low moisture absorption rate 1/8" = 3mm = 0.118" Please Note: our pattern acrylic sheet is double side color and pattern. Product name Cast Acrylic Sheet Materials 100% virgin material; Chinese material Density 1.2g/cm3 Color red, orange, yellow, green, blue, purple,we have more than 20 kinds of color for choose, also could be custom color. Product Feature 1. Perfect transparency and the light transmittance with 93% 2. Excellent electrical insulation 3. Very light in weight 4. High plasticity, Processing and shaping easier 5. Strong surface hardness and good weather resisting property 6. Beautiful in color, easy to clean Application 1. construction: windows, soundproof windows and doors, mining mask, telephone booths, etc. 2.ad: light boxes, signs, signage, exhibition, etc. 3. transport: trains, cars and other vehicles, doors and windows 4. Medical: baby incubators, a variety of surgical medical devices 5. the public goods: sanitary facilities, handicrafts, cosmetics, frame, tank, etc

Titanium Tube Target Titanium Gr2 ASTM B861-06 a 133OD*125ID*2140L Vacuum Coating Target Item name Titanium tube target Size φ145*38 Grade TA10 Packaging Wooden case Port of place Xi'an port, Beijing port, Shanghai port, Guangzhou port, Shenzhen port Titanium is a widely used metal, due to its light weight, higher strength than aluminum alloy, can maintain a higher strength than aluminum at high temperature and is highly valued by the aviation industry. Titanium has a wide range of uses in the military industry. Nuclear-powered submarines, hydrofoil boats, anti-tank missiles, missile launchers, bulletproof vests, etc. The presence of impurities in titanium significantly affects the physical, chemical, mechanical properties and corrosion resistance of titanium. In particular, some interstitial impurities can distort the crystal lattice of titanium and affect various properties of titanium. At room temperature, the chemical activity of titanium is very small and can react with a few substances such as hydrofluoric acid, but when the temperature increases, the activity of titanium increases rapidly, especially at high temperature, titanium can react violently with many substancesIn addition, titanium equipment and devices are widely used in coastal power stations, offshore oil production equipment, seawater desalination, Marine chemical production and mariculture. Titanium's lightweight, high-strength properties have long been on the radar of automakers. The purer the titanium, the more plastic it is. Good corrosion resistance, not affected by the atmosphere and seawater. At room temperature, it will not be corroded by hydrochloric acid below 7%, sulfuric acid below 5%, nitric acid, aqua regia or dilute alkali solution; Only hydrofluoric acid, concentrated hydrochloric acid, concentrated sulfuric acid can act on it. With the improvement of medical technology, metal implantation in human body is a very common surgical operation. Due to the weak rejection reaction of titanium metal with human tissue, it is widely used in artificial bones, artificial joints, artificial teeth and other human implants. Titanium has a wide range of uses in the military industry. Nuclear-powered submarines, hydrofoil boats, anti-tank missiles, missile launchers, bulletproof vests, etc. In the aviation industry, civilian aircraft, strategic rocket engines, spacecraft satellite antennas and other large amounts of titanium.

CNC Machining Magnesium Alloy Products AZ31 Car Parts 1. Light weight: magnesium alloy is 1/3 lighter than aluminum alloy and 77% lighter than steel, which is the lightest structural metal material in common use. 2. High specific strength and strong rigidity: in the same shape, the rigidity of magnesium alloy products is more than 10 times that of plastics.Under the same rigid conditions, a pound of magnesium is as strong as 1.8 pounds of aluminum and 2.1 pounds of steel.If ABS plastic is replaced with magnesium alloy, the weight of the product can be reduced by 36% and the thickness can be reduced by 64%. 3. Impact resistance: excellent damping shock absorption performance: magnesium alloy resistance to vibration and reduce noise performance is excellent, 10-50 times of aluminum alloy.Magnesium alloy is strong enough to withstand impact, and its thickness is only 1/3 of that of plastic under the same resistance. 4. Good creep resistance. 5. In line with environmental protection: can be completely recycled. 6. Excellent die-casting formability: die-casting can be used to make parts with complex shapes and shell parts with ultra-thin thickness up to 0.45mm thick (ABS plastic 1.2-2mm, aluminum alloy 1.5-2mm). Can be customized according to customer demand a variety of auto parts. Product Name Custom CNC Machining Magnesium Alloy AZ31 Parts Metal Rims Car Hubs Material Magnesium Alloy AZ31B Finish MAO treatment Standard GB, ASTIM, JIS, DIN and others Brand DOME Application Rock Crawler use Certification ISO9001:2015,SGS,ROHS

Material Stainless steel Color Silvery white OEM Accept Application Assembly line,Conveyor Size Customized