Minerals & Metals

welded gabion mesh introduction: Welded Gabion is made of welded wire mesh panel, it is assembled with a spiral- shaped wire to assemble the front and rear panels, the bottom plate and the partition after welding, and is packed together with the mesh cover. All the caged products that are folded and tied are an independent individual. Welded gabion mesh install: Field installation is quick and easy. With diaphrams and stiffeners installed, the gabion may be filled with standard loading equipment. After filling the gabion, a lid is placed on top and secured with spiral binders, lacing wire or "C" rings. Welded Wire Gabions hold their shape better - they don't bulge out when filled. They are easy to handle, which means more work, less labor and higher productivity on the job. welded gabion mesh applications: 1. Retaining wall structures 2. Prevention of current scour and erosion control 3. Bridge protection 4. Hydraulic structures, dams and culverts 5. Embankment protection 6. Rockfall prevention and soil erosion protection welded gabion mesh cage dimensions: Specification Of Welded Gabion Mesh Gabion size(m) Mesh opening Wire diameter Surface treatment 1×1×1 50 x 50mm 75 x 75mm 80 x 80mm 100 x 100mm 3-6mm Galvanized Galfan PVC coated 2×1×1 3×1×1 0.5×0.5×0.5 1 , ×0.5×0.5 1×1×0.5 2×1×0.5 2×1×1 3×1×1 Generally, stiffener length 300mm, spiral binder wire diameter 2-4mm All sizes can customized according to your request.

The round column is a commonly used supporting column for the double wave corrugated guardrail. The general column specification is 140mm/114mm, the thickness is generally 4.5mm, and the common height is 2150mm. Generally, the length is determined according to the drawings or terrain. The square tube column is a commonly used supporting column for the three-wave guardrail. The specification is 130*130, the thickness is generally 6.0mm, and the common height is 2540mm. Generally, the length is determined according to the drawings or terrain. Delivery time: 15-30days Price term： EXW, FOB, CIF, CFR, CNF, etc. Payment： L/C, T/T, Western Union, etc. Port Delivery： Qingdao, Shanghai, Tianjin, Shenzhen, etc. We can provide customized products in different materials and sizes to meet different needs. Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information. We can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required. The website: https://www.faststeelfactories.com/

Minimum Order: 1 bags

The corrosion resistance of stainless steel wafer mainly depends on its alloy composition and internal structure, the main role is chromium element. Chromium has high chemical stability, forming a passivation film on the surface of the steel, isolating the metal from the outside world, protecting the steel from oxidation and increasing the corrosion resistance of the steel. Product name ASTM A276-05 SS316 BA Cold Rolled Stainless Steel Round Circle Plate For Cooknware Surface 2b ,No.1, No.4,mirror ,8K,polish,ba,bursh... Material 201,202 S , pecification OD:100mm---800mm Thickness:3mm- , --16mm(or as your requirement) Technique Cold Rolled Hot Rolled Standard JIS,AISI,ASTM,DIN,EN,GB. , Application range Decorative,Industry,kitchenware,etc Pa , yment T/T,30% advanced payment before production and balance before shipment.

Aluminium Coil Coating Line - Litong Why is it necessary to coated aluminium coil or plastics with an aluminium coating? To prevent corrosion of items as well as aesthetics. The first continuous coil painting line, invented by Joseph Hunter, laid the groundwork for the subsequent development of industrial automation. Smalls says it was a very cost effective way of painting metal. So what are the main equipment and process of aluminum coil coating line? I. Main coating equipment 1. Terminal equipment and aluminum coil coaters. 2. Metal treatment. 3. Primer/topcoat applicator. 4. Air cooling and water quenching; air cooling is used to reduce the strip PMT (peak metal temperature) to about 150-170 degrees Celsius. 5. Process control. 6. Tension straightener; this is where a high degree of control is required and aluminum color coated coils can be as light as 0.18mm (equivalent to 0.06mm steel). 7. Chemical coating machine. 8. Main/finish drying box. 9. Hot/cold laminators; can increase the advantages of material stiffness 10. Installation service. II. Coil coating process flow 1. Production management of pre-treatment stage of coating line. Aluminum coils must be surface treated to remove oil and rust before powder coating. There are more chemicals used in this stage, mainly rust remover, degreasing agent, table conditioning agent, phosphating agent, etc. 2. Powder coating Ensure that the sprayed aluminum rolls are evenly powdered and of uniform thickness to prevent defects such as thin spraying, leakage spraying, rubbing off, etc. Before entering curing, the powder attached to it should be blown off as far as possible to facilitate uniform powdering of aluminum rolls. 3. Heating curing Baking in strict accordance with the process and temperature and time control, pay practical attention to prevent color difference, over-baking or too short a time caused by insufficient curing. 4.Final installation and transportation Characteristics of LITONG aluminum coil coating line 1. Adopt high precision roll coating machine, excellent coating quality. 2. Suitable for acrylic, polyester, and polyvinylidene fluoride (PVDF) coatings. 3. Specifically designed to fit the area of the customer's plant. 4. Fine coating in accordance with international standards. 5. Easy to operate controls, online operator training available. In short aluminum color coating provides a versatile product for the construction industry. Incorrect line design can lead to high scrap rates or inability to handle the full range of products, resulting in far lower production yields and incalculable losses, choosing the right coating line plant and aluminum coil coating machinery is critical for your painted aluminium coils. Please feel free to contact us to discuss your requirements.

TZ1600-100 Food Grade High-Speed Coating Line Coating line features: TZ1600-100 is a food-grade high-speed coating line with full sealing dust-free workshop. The products of this coating line apply to can ends & tabs. The pretreament process is different with other coating lines to meet the requirement of food-grade product. Expanding shaft loading system and waste gas treatment system is always recommended. Application: For coating food grade aluminium and tinplate coils using for beverage can ends & tabs, Food can front ends & tabs, Food can bottom ends, PP caps, Closures, Aerosol can ends & components, Capacitors, etc. Advantage:Food grade, high speed coating line, continuous production with loopers Main parameters of coating line Material parameter Thickness: 0.20～0.5mm Width: 700～1650mm Outer diameter OD(max): Φ2000mm Inner diameter: Φ505mm Bobbin material: Paper Inverval-layers deviation tolerance: ≤0.5 mm (Excluding the bottom 5 layers and exterior 2 layers) Coil over-all deviation tolerance: ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) Coating thickness: Topside/back side dry film thickness: 5~13 g/㎡, total dry film thickness less than 13 g/㎡ Product Weight: Max12000kg（Excluding bobbin）   CCL Processing Speed: 40 m/min (Speed benchmark: thickness 0.3mm coil exclude PVDF coating)   Heating Energy Source: LNG, LPG   Roller coating Process: Continuous 2 sides 3 coating & 2 baking   Properties and features: Roller width: 1900 Coils feeding centering adjustment : ±100mm Threading speed: 5～15m/min（Adjustable） Line maximum speed: 100m/min Line speed accuracy: Steady Speed, ±0.1%; Acceleration, ±0.4% Uncoiling tension range: 200～500kgf Processing tension range: 300～850kgf Coiling tension range: 500～1300kgf Tension accuracy: Steady Speed, ±1.0%; Acceleration, ±2.0% Line space dimensions: 140m*14.2m*9m Heating Energy Source: LNG,LPG   2.Basic Production Process Coil loading → Uncoil machine → Convey device → Cutting device → Sewing table → Tension device 1 → entrance accumulator → CPC 1 → Tension device 2 → Pretreatment (Including Degreasing, Water washing, Neutralizing, Water washingdrying,  Deionized water washing, Drying, CPC 2, Roller-coating chromizing, Drying) → CPC 3 → Tension device 3 → Topside / backside roller-coater → Curing oven → Air cooling → Water cooling roller →Tension device 4 → CPC 4 → Rear accumulator → Tension device 5 → 2 rollers convey device → Cutting device → Coil machine → Coil discharging   3.Main devices list Name Quantity Coil loading device 2 Uncoil machine 2 Coil loading platform 1 Convey device 3 Cutting device 2 Sewing table 1 Tension Device 5 Accumulator 2 Redirection steel roller 9 Degrease pool 3 Brushing roller 2 Water washing pool 5 Neutralizing pool 1 Squeeze roller 14 Air drying device 1 Roller-coating chromizing coater 1 Chromizing drying oven 1 Coater 1 Curing oven 1 Air cooling system 3 Coil machine 1 Coil discharging device 1 CPC 5 EPC 1 Hydraulic system 3 Electrical system 1 Steel frame 1 Lift 1   4.Water and power consumption of coating line Total power consumption: 830KW Compressed air: Min5.5bar, 1Nm3/min, actual consumption 0.5Nm3/min Water: Deionized water, supply quantity is about 4T/h Heating fuel: LPG or LNG LPG consumption: 0.2 CBM/min LNG consumption: 0.4 CBM/min 5. The coating line design and manufacture leads 100 days, installation and testing leads 60 days. 6.Trade terms: FOB, CIF are available 7.Payment terms: T/T, D/P, LC are acceptable 8. Packing style: Wooden pallet 9. Transportation: by sea

TZ1600-35 2-Sides 2-Coatings Aluminium Production Line (Separated) Coating line features: Model TZ1600-35 coating line (separated structure) is suitable for certain coating factories. 2-sides 2-coating coating products in thickness range 0.15mm~0.6mm applies to most ACP material, roofing and ceiling material. Model TZ1600-35 coating line is high quality coating line, good performance in all kinds of paint coating. Separated structure is flexible in production, pretreatment process and coating process are separated and non-interfering, so that production is much easier to plan or schedule. Operation faults and equipment problems effect is less. A primary reason to choose separated structure is its advantage over dimension, Model TZ1600-35 requires only 85m×18m×7m workshop. Application: For coating aluminium coil of ACP(Aluminium Composite Panel), roofing , cladding, ceiling,roller shutter,etc. Advantage: Widely usage range, short line, smaller dimension workshop needed,  less operation faults and equipment problems effect . 1. Main parameters of coating line Material parameter Thickness: 0.15～0.6mm Width: 1600mm Outer diameter OD(max): Φ1500mm Inner diameter: Φ405mm Bobbin material: Steel or paper Inverval-layers deviation tolerance: ≤0.8 mm (Excluding the bottom 5 layers and exterior 2 layers) Coil over-all deviation tolerance: ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) Coating thickness: Dry film thickness: 8~20 um   Product Weight: Max 5000kg（Excluding bobbin）   CCL Processing Speed: 35 m/min (Speed benchmark: thickness 0.25mm coil exclude PVDF coating)   Heating Energy Source: LNG, LPG   Roller coating Process: Continuous 2 sides 2 coating & 2 baking   Properties and features: Roller width: 1800mm Coils feeding centering adjustment : ±75mm Threading speed: 5～15m/min（Adjustable） Line maximum speed: 35m/min Line speed accuracy: Steady Speed, ±0.1%; Acceleration, ±0.4% Uncoiling tension range: 160～800kgf Processing tension range: 160～800kgf Coiling tension range: 320～1400kgf Tension accuracy: Steady Speed, ±1.0%; Acceleration, ±2.0% Line space dimensions: 76000mm×1000mm×6500mm Heating Energy Source: LNG, LPG   2. Basic Production Process Coating line Coil loading → Uncoil machine → Sewing table → Topside primer-paint roller-coater → Curing oven 1 → Air cooling → CPC 1 → Tension device 1 →Topside 2-coat and backside roller-coater → Curing oven 2 → CPC 2 → Tension device 2 → Coil machiner → Coil discharging   Pretreatment line Coil loading → Uncoil machine → Sewing table → Acid washing, brushing roller → Water washing → Deionized water washing → Drying → Roller- coating chromizing → Drying → Cooling → Tension device → Coil machine → Coil discharging   Rewinding line Coil loading → Uncoil machine → Sewing table → Tension device → Coil machine → Coil discharging   3. Main devices list Name Quantity Uncoil machine 3 Sewing table 3 Tension Device 4 Redirection steel roller 11 Brushing roller 2 Degrease pool 3 Water washing pool 2 Drying device 2 Squeeze roller 5 Roller-coating chromizing coater 1 Coater 2 Curing oven 2 Heat system 2 Air cooling system 4 Film device 1 Coil machine 3 CPC 2 EPC 3 Steel frame 1 Electrical system 3 *Optional configuration: waste gas treatment and energy recycle system   4. Water and power consumption of coating line Total power consumption: 600KW Compressed air: Min5.5bar,1Nm3/min,actual consumption Water: Deionized water, supply quantity is about 4T/h Heating fuel: LPG or LNG LPG consumption: 0.6 CBM/min LNG consumption: 1 CBM/min 5.The coating line design and manufacture leads 100 days, installation and testing leads 60 days. 6.Trade terms: FOB, CIF are available 7.Payment terms: T/T, D/P, LC are acceptable 8. Packing style: Wooden pallet 9. Transportation: by sea

TZ1300-25 1-side 1-coating Line Coating line functions: This is an economic sort of coating line relate to slim ACP top/bottom coil coating. Product thickness 0.02 mm ~ 0.1 mm appropriates for dividing panels This coating line is an enhance for those coating factories which intend to enhance product variety. It also matches factories in restricted measurement. Application: For coating top coil and bottom coil of ACP( Aluminium Composite Panel), specially for coating slim gauge aluminium coil making use of for dividing panels. Advantage: Economical and also easy to use, tiny dimension workshop needed 1. Main parameters of coatingline Material parameter Thickness: 0.02～0.1mm Width: 1240mm Outer diameter OD(max): Φ1100mm Inner diameter: Φ150mm, Φ405mm Bobbin material: Steel or paper Inverval-layers deviation tolerance: ≤0.8 mm (Excluding the bottom 5 layers and exterior 2 layers) Coil over-all deviation tolerance: ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) Coating thickness: Dry film thickness: 8~15 um   Product Weight: Max 3000kg（Excluding bobbin） CCL Processing Speed: 25 m/min (Speed benchmark: thickness 0.1mm coil exclude PVDF coating)   Heating Energy Source: LNG, LPG   Roller coating Process: Continuous 1 side 1 coating & baking   Properties and features: Roller width: 1500mm Coils feeding centering adjustment : ±75mm Threading speed: 5～10m/min（Adjustable） Line maximum speed: 25m/min Line speed accuracy: Steady Speed, ±0.1%;Acceleration, ±0.4% Uncoiling tension range: 80～150kgf Processing tension range: 80～150kgf Coiling tension range: 80～200kgf Tension accuracy: Steady Speed, ±1.0%; Acceleration, ±2.0% Line space dimensions: 55000mm×7500mm×6000mm Heating Energy Source: LNG, LPG   2. Basic Production Process Coil loading → Uncoil machine → Pretreatment (Including Degreasing, Water washing) → Chromizing → Drying → Re-direction → Topside roller-coating → Curing oven → Cooling → Tension machine → Recoiler → Coil discharging   3. Main devices list Name Quantity Coil loading device 1 Sewing table 1 Pretreatment line 1 Drying device 1 Coater 1 Curing Oven 1 Heating system 3 Air cooling devices 1 3-rollers cooling device 1 Tension device 1 Recoil machine 1 Electrical system 1 *Optional configuration: waste gas treatment and energy recycle system.   4. Water and power consumption of coating line Total power consumption: 50KW Compressed air: Min5.5bar，1Nm3/min，actual consumption 0.5Nm3/min Water: Deionized water, supply quantity is about 4T/h Heating fuel: LPG or LNG LPG consumption: 0.2 CBM/min LNG consumption: 0.5 CBM/min 5. The coating line design and manufacture leads 90 days, installation and testing leads 60 days. 6.Trade terms: FOB, CIF are available 7.Payment terms: T/T, D/P, LC are acceptable 8. Packing style: Wooden pallet 9. Transportation: by sea

TZ1600-30 Single-Coating Aluminium Coating Line Coating line features: This is an economic type of coating line apply to most ACP top/bottom coil coating. Product thickness 0.1mm~0.5mm is common used for ACP. This coating line can also produce some gauges of roofing coils. With a rewinding line, this coating line meets basic requirements from raw material to finished product of coating factory. The line requires a minimum 70m×12m×7m workshop dimension, which suits most factories in limited dimension. Application: For coating top coil and bottom coil of ACP(Aluminium Composite Panel) Advantage: Economical and easy to use, small dimension workshop needed   1. Main parameters of coating line   Material parameter Thickness: 0.1～0.5mm Width: 1600mm Outer diameter OD(max): Φ1400mm Inner diameter: Φ150mm, Φ405mm Bobbin material: Steel or paper Inverval-layers deviation tolerence: ≤0.8 mm (Excluding the bottom 5 layers and exterior 2 layers) Coil over-all deviation tolerence: ≤2 mm (Excluding the bottom 5 layers and exterior 2 layers) Coating thicknes: Dry film thickness: 8~20 um Product Weight: Max 4000kg（Excluding bobbin）   CCL Processing Speed: 30 m/min (Speed benchmark: thickness 0.25mm coil exclude PVDF coating) Heating Energy Source: LNG, LPG Roller coating Process: Continuous 1 side 1 coating & baking Properties and features: Roller width: 1800mm Coils feeding centering adjustment : ±75mm Threading speed: 5～15m/min（Adjustable） Line maximum speed: 30m/min Line speed accuracy: Steady Speed, ±0.1%;Acceleration, ±0.4% Uncoiling tension range: 160～700kgf Processing tension range: 160～700kgf Coiling tension range: 320～1200kgf Tension accuracy: Steady Speed, ±1.0%; Acceleration, ±2.0% Line space dimensions: 55000mm×7.500mm×6000mm Heating Energy Source: LNG, LPG 2. Basic Production Process Coil loading → Uncoil machine → Pretreatment (Including Degreasing, Roller brushing device, drying) → Chromizing → Drying → Re-direction → Topside roller-coating → Curing oven → Cooling  → Tension machine → Recoiler → Coil discharging   3. Main devices list Name Quantity Coil loading device 1 Sewing table 1 Pretreatment line 1 3M water drying device 1 Chromizing Coater 1 Chromizing drying device 1 Coater 1 Curing Oven 1 Heating system 4 Air cooling devices 1 3-rollers cooling device 1 Tension device 1 Recoil machine 1 Electrical system 1 Rewinding line 1 Coil loading machine 1 Tension device 1 Coil discharging machine 1 *Optional configuration: waste gas treatment and energy recycle system.   4. Water and power consumption of coating line Total power consumption: 80KW Compressed air: Min5.5bar，1Nm3/min, actual consumption 0.5Nm3/min Water: Deionized water, supply quantity is about 4T/h Heating fuel: LPG or LNG LPG consumption: 0.2 CBM/min LNG consumption: 0.5 CBM/min 5. The coating line project design and manufacture leads 90 days, installation and testing leads 60 days.  6.Trade terms: FOB, CIF are available 7.Payment terms: T/T, D/P, LC are acceptable 8. Packing style: Wooden pallet 9. Transportation: by sea

ASTM B196 Grade( C17200) Beryllium Copper Rod 25mmx1m With Bright Surface Product Normal Description: Product Name: Beryllium copper rod Grade: ASTM B 196 (C17200) Standard: ASTM B196,251,463; SAE J461,463; AMS 4533,4534,4535; AMS 4650,4651; RWMA Class 4 Product Size: 25mmx1m State: A(TB00),1/2H (TD02), H(TD04),AT(TF00),HT(TH04) Typical Application: used for low maintenance bearings and bushings Product Brand: CUBERYLLIUM® International Specification of C17200 Beryllium Copper Rods: Rods/Bars/Tubes: ASTM B196,251,463; SAE J461,463; AMS 4533,4534,4535; AMS 4650,4651; RWMA Class 4 European Standards: CuBe2, Alloy 25, QBe2, BrB2, DIN.2.1247, CW101C to EN Note: ASTM: American Society for Testing and Materials SAE: Society of Automotive Engineers AMS: Aerospace Materials Specification(Published by SEA) RWMA: Resistance Welder Manufacturers' Association Note: Unless otherwise specified, material will be produced by ASTM.

1060 5083 aluminum sheet plate for decorative Alloy 3003 3004 3005 3105 3104 Temper O H12 H14 H24 H16 H18 etc Thickness 0.1-15mm Width 100-2800mm Core ID 505mm 405mm Core OD around 1100mm or as customers' request; surface quality super clean & flat Delivery Time around 30 days Packing Standard seaworthy export wooden pallets Aluminum coil/sheet is widely used in electronics, packaging, construction, machinery and other fields.It is divided into pure aluminium plate, alloy aluminium plate, thin aluminium plate, medium and thick aluminium plate, pattern aluminium plate. At present, the aluminum sheet grade that our company can supply:1050, 1050A, 1060, 1070, 1100, 2024 (2A12), LY12, LY11, 2A11, 2A14 (LD10), 2017, 2A17, 3003, 3004, 3005, 3102, 3105, 3A21, 5005, 5052, 5083, 5086, 5182, 5754, 5154, 5454, 5A05, 5A06, 6061, 6063, 6082, 7005, 7050, 7075, 7475, 8006, 8011, 8079 etc.

Smoking Glass Bong Conical Filter 9.5 Inches 4 Inches Base Glass Dab Rig SMOKING GLASS BONG​ DESCRIPTION Cawonderland always offers creative designs. You won't be disappointed when you see this cool Dab rig. This rig stands 24cm/9.5inches. The mouthpiece and perc use a rare fluorescent green color, make it more eye-catching. The cone-shaped perc chamber doesn’t only give it a futuristic look but also improves water filtration for smooth tasty rips. If you are looking for a rig that can catch your eyes, this is no doubt this is the best solution for you! Material: Glass Color: Green Jade Height: 24cm/9.5 Inches Thickness: 5mm Base Diamanter: 10 Cm/ 4 Inches Logo: Silk-screen / Emboss /Laser,OEM Logo

Stainless Steel material powder metallurgy metal injection molding sintered parts MIM products. How to work with us: 1. Send us 3D drawing (STEP/IGS/SolidWorks format etc. ) 2. Specify the requirements (quantity, material, and surface finish requirements etc) to us via email. Manufacturing range MIM Metal Injection Molding color could be customized Applicable Material stainless steel/titanium/brass/copper etc. Our advantage 1. Rich experience in metal injection molding field. 2. Small order accepted for the beginning 3. New material develop capability. 4. Top quality guaranteed by skilled workers, managing system and status of facilities. 5.100% quality inspection before delivery Surface finsih Natural machined color/anodized finish/ coating / Passivation / PVD finish/nickel white/brush/heat treatment/fine glass beads/grounding/tumbled finish etc. Payment Terms 50% deposit before production and 50% balance before arranging to ship

Stainless steel corner beads are popularly used to make flat decorative facade joints on raked render. The stainless steel corner armoring beads are also widely used in the places where there is a long term humidity like sanitary rooms, domestic bathrooms and kitchens wall plastering. Corner beads made of stainless steel sheets offer excellent corrosion resistance, flat surface and sharp angle. SS beads are manufactured to the same dimensions as the galvanized beads, they are suitable for exterior application and thermal insulation systems. Dimensions: Standard sizes: 8mm, 10 mm and 15mm. Made-to-measure available for 200 cm length. Packaging: In 20 ml bundles. In 500 linear meter pallets

Interior corner beads are the most easily forgotten aspect of a drywall job. Designed for internal plaster uses, manufactured from quality galvanized steel sheet or perforated mesh in metal or PVC materials. Solid flanges are preferable. Corner bead are adapt to framing irregularities and to match appropriate screed heights. 90º and 135º Internal corner beads are designed to give perfectly straight, sharp inside corners every time. Use Inside corner for finishing wall niches quickly and easily. 90º and 135º Internal corner beads are self aligning and is perfect wherever crooked framing is a problem or when drywall doesn’t meet perfectly in the corner. Materials: Galvanized Steel, Aluminium,Stainless Steel, Zinc (99% pure zinc) Alloy, PVC. Expaned sheet or perforated sheet. Specifications: 90º Internal corner beads providing perfectly straight, sharp inside corners with nail hole. 135º Internal corner beads providing straight corners with nail hole. Used over flat surfaces. Plaster keys near nose for reinforcement where needed most. PVC Perforated Mesh Drywall Angle Beads for Internal Wall Corner Framing: 5*5 145g-165g or 4*4mm 2.5cm*2.5cm ,10cm*10cm