Mining, Metal, Plastic & Glass Machinery

Aluminum-zinc alloy casting Category:Aluminum alloy casting Aluminum-zinc alloy casting has good processing performance, and there are common grades such as AC1A and ZA43. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The mechanical properties of aluminum-zinc alloy are similar to brass, and it has good machining properties and can be processed into small metal parts. Common grades are AC1A, ZA43, etc., and the surface treatment effect is good, can adapt to a variety of electroplating processes, and has good corrosion resistance. The aluminum-zinc alloy alloy has excellent processing performance, the overall comprehensive performance is close to that of lead brass, the surface treatment effect is good, and it has good electrical conductivity. It can be widely used in electronic and electrical industries. The lower one is added, and it is an environmentally friendly material, which can meet most environmental protection requirements. https://www.foundryseiko.com

Minimum Order: 1000

1.WPS whole series shredder use high-quality alloy steel and equipped with D2/DC53 blades,also offer different design solution according to different materials. 2.The series single-shaft shredders were developed with premium quality,wide range of applications, low speed（Main shaft speed：78rpm）, high torque, and low noise. 3.Capacity：300-3000 kg/h 1.Customized Spindle Rotor The W type for soft material and the blade seat type for block material. 2.Rotor Change Angle Rotor can be reuse by change the angle according to the wearing condition, which can saving cost by a lot. 3.External bearing seat. Main shaft and the machine body are sealed by a sealing ring, which effectively prevents the shredded materials from entering the bearing, to prolonging the life of the bearing. 4.Hydraulic Opening System The maintenance time can be saved by adopt of hydraulic system to provide quick screen change.

Minimum Order: 1 bags

Cast aluminum-magnesium alloy Category:Aluminum alloy casting Cast Aluminum-magnesium alloy are widely used in the fields of electronics, automobiles, and aerospace. Common grades are 7A09 etc. The main elements of aluminum-magnesium alloy include aluminum and magnesium. The alloy products have high strength, low density and strong heat dissipation capacity, so they are popular in the fields of electronics, automobiles, and aerospace. Common grades are 5052, 5754, 5083, etc. Aluminum alloys have lower cost, superior performance and stronger product competitiveness. The density of aluminum-magnesium alloy is small, so it is lighter under the same volume, and has a certain strength, which can be used for load-bearing. Aluminum-magnesium alloy has strong heat dissipation, and at the same time, it can resist electromagnetic interference and has strong electromagnetic shielding. Its appearance has a certain degree of beauty, is resistant to corrosion, can maintain a good quality of appearance for a long time, and the material is environmentally friendly, and the waste is recyclable. https://www.foundryseiko.com

Minimum Order: 1000

Category:Aluminum alloy casting Cast Aluminum-copper alloy can be made into forgings, aerospace structural parts, machined products, and more. Common grades are ZL202 and so on. Cast Aluminum-copper alloy belong to 2xx, x series aluminum alloys, and also belong to ZL-2xx aluminum alloys. Heat resistance, high strength.Can be used for high-power equipment packaging materials, heat dissipation components, ceramics and bases, etc. Aluminum-copper alloy is a kind of hard alloy material, and it also has good electrical conductivity. It has high mechanical properties at room temperature and high temperature, and is easy to cast and cut. We can cast 2011, 2024, 2218, 2618 and other different aluminum-copper alloy products. Aluminum-copper alloys are easy to process and can be made into different profiles. Aluminum-copper alloys are usually made of aluminum-copper multi- component alloys by adding a small amount of other elements to meet the application of aluminum-copper alloys in industry, so that they can be used in different environments. Aluminum-copper alloys can replace copper wires as wires in some cases, and can also be used as aerospace structural parts and so on. https://www.foundryseiko.com

Minimum Order: 1000

Category:Copper alloy casting Copper casting, the copper appears rose red as a whole, and after an oxide film is formed on the surface, it appears purple, so it also called red copper.Copper is often used for electrical, thermal, and corrosion-resistant components. Red copper is also called industrial pure copper. Its appearance is purple, so it is also called red copper. It has good electrical conductivity and thermal conductivity, as well as good plasticity and easy processing. We can produce different grades of copper products such as T1, T2, T3. Red copper is not completely pure copper. Generally, some other elements are added to improve the material properties of the product. Red copper products have good electrical conductivity, so they are widely used in the production of electrical and thermal conductivity equipment, such as motor short-circuit rings, electromagnetic heating inductors, etc. In addition, red copper has good welding performance and can be processed for secondary processing. https://www.foundryseiko.com

Minimum Order: 1 bags

Our series pvc Coating Machine mainly used for Film coating : release film, protective film, scratch-resistant film. Hot stamping film, laser holographic film, aluminized transfer, thermal transfer film, coating and other coating products, production, ,BOPP,CPP ,PET ,PP ,PVC tape, foam stickers, PE, non-woven, PU coating, , Metallic yarn coating The paper coating : It’s suitable for the production of paper, white cardboard, duplex cardboard, synthetic paper, PP paper, PET sheet, high light waterproof photo paper, matte photo paper, cast coated photo paper, RC high glossy photo paper, carbonless paper, PP Synthetic Paper and other high-tech information industry paper. Foil coating : Household Foil, Pharmacy Foil, Cold Forming Medicine Package Foil, Food Soft Packing Foil, Container Foil, Beer Mark, Air-conditioner Foil, Decoration Foil Machine main parameter PE Protective Film Coating Machine: 1. Whole machine controlled by PLC 2. Tension controller adopts Mitsubishi 3. Main motor adopts ABB motor . 4. The dry oven length is about 18 meters 5. Machine speed is about 180mmin 6. Coating speed is about 160mmin. 7. Coating mode depends on the coating thickness, the solid content and the viscosity . 8. Heating type :Electric heating ,Oil heating ,Steaming heating (You can choose one which is most economically ) Model C3-3 Coating width 1000mm-1800mm Material paper ,BOPP,CPP,PET,PVC, Aluminum foil Unwinding dia. φ300~1000mm ewinding dia. φ300~1000mm Oven temperature 30 ~ 220°C(According to the material) Oven length 3 ~ 48 m (According to the material) Coating speed 5~ 180 m/min (According to the material) Coating type Comma scraper coating, veins roller coating, three-rollers coating, etc.

Category:Copper alloy casting Brass casting refers to the use of brass as a raw material and casting into castings that can be used in different fields. Common grades are C2100, C2200 and so on. An alloy generally composed of copper and zinc, known as brass, has a golden yellow appearance. Some other elements can be added to brass to produce special brass that works in different environments. Generally, the hardness and cutting performance of brass products are very good, so they can be processed into different and more refined products. Brass has a small crystallization temperature interval and has better casting properties. Compared with tin bronze, cast brass has better mechanical properties. In addition, the zinc contained in brass leads to lower cost of brass, but also because of The presence of zinc makes cast brass have poor corrosion resistance, and other elements are usually added to brass to enable brass to have some other properties to adapt to work in different environments. https://www.foundryseiko.com

Minimum Order: 100

Reinforced with 20% of glass fiber on substrate PA66 is called PA66 GF20, it improves dimensionally stabilized and impact resistance for injection moulding. Typical Application of PA66 GF 20 (A2000D) PA GF20 is applied to various precision gears due to its high rigidity, dimensional stability, noise reduction, wear resistance, quietness, lubrication and antistatic. Processing Detail of PA66 GF20 (A2000D) Other Details of  PA66 GF20 (A2000D) Physical Property Ash (20.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1285Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.9 % 1 ISO294-4) Shrinkage Vertical Flow (0.8-1.1% I ISO294-4) Mechanical Properties Tensile strength (145.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 5mm/min Notched Impact Strength (8.5KJ/m2 I ISO179) Conditioned 1.0J Flexural Strength (235MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (6876 MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (245*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyethylene or buy pa6 6 gf50, contact us.

Minimum Order: 1000

PA66 GF 15 is Nylon66 and 15% Glass-Filled, these materials are performed with medium stiffness and strength but it has much better mechanical properties over unfilled granules. Reinforced with 15% of glass fiber and modified Nylon 66 in Anmei plastic plant combined with other property enhancements such as high tensile strength, heat stabilized and flame retardant make it suitable for injection molding.  Other percentages glass-filled nylon is also available on a custom-order basis. Typical Application of pa66gf15 (A2000C) Nylon 66 GF15, mainly used in internal and external structural parts around the engine, electrical switches, and electronic connectors. Processing Detail of PA66 GF15 (A2000C) Other Details of pa6 6gf15 (A2000C) Physical Property Ash (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1245Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.7-1.0% 1 ISO294-4) Shrinkage Vertical Flow (1.0-1.4% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.0% I ISO527) Conditioned 5mm/min Notched Impact Strength 6.0KJ/m2 ISO179) Conditioned 1.0J Flexural Strength (188MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5350MPa I ISO178) Conditioned 2mm/ min Thermal Property Melting Point (260°C I ISO11357) Hot Deformation Temperature (240*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 280-300°C Nozzle Temperature 280-300*C Tooling Temperature 80-100*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ Want to know the details of modified polyolefin or more, contact us.

Minimum Order: 1000

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this PA6 plastic material has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive industry.  Typical Application of PA6 GF45 (A1011I) PA6 GF45 is used in turbines, propellers, screws, nuts, washers and other components with high rigidity and dimensional stability and heat-resistant aging, as well as fishing tackle reels, racket frames and other components with high mechanical strength, good toughness, higher tensile and compressive strength. Other Details of PA6 GF45 (A1011I) Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C * Molding conditions are just for reference, please make an adjustment based on the actual situation！ As one of engineering plastic manufacturers, Anmei provides pa6 plastic material, modified polyolefin, master batches and etc. For more information, please feel free to contact us!

Minimum Order: 1000

We are here to be your reliable partners of Color Masterbatch. Color masterbatches are widely used in polyethylene(PE), polypropylene(PP), polystyrene(PS), ABS, nylon, PC, PET and other resins to produce colorful fibers, clothing, blown films, daily plastics, cables and optical cables, household appliances, automobiles accessories, etc. The carrier of the special color masterbatch is the same as the plastic of the product, and it has good matching. After heating and melting, the pigment particles can be dispersed in the product plastic well, and it has good chemical stability. From a functional point of view, the products of color masterbatch material include antistatic masterbatch, antioxidant masterbatch, light stable masterbatch, lubricating masterbatch, open masterbatch, flame retardant masterbatch, matte masterbatch, pearlescent masterbatch, filler masterbatch, conductive masterbatch and antibacterial and anti-mildew masterbatch. Some masterbatches are comparable to European and American materials like DATE company with stable product quality and high-cost performance. As a reliable masterbatch supplier/masterbatch exporter, Anmei produces the low-shrinkage PBT masterbatch for optical fiber and cable, which is one of our special masterbatch products. Types of Masterbatch Material in Anmei We offer a wide range of white masterbatches based on carriers such as TPU, PE, PS, ABS, and more. An antimicrobial masterbatch is supplied in carriers suitable for most polymers including PVC, pe masterbatch, HDPE, pp masterbatch, PA, PET, abs masterbatch and PC. What is Antimicrobial Masterbatch? It can be used in most general plastics such as ABS, PP, PE, PC, as well as injection molding, extrusion, blow molding and other conventional plastics. For products that have high requirements for pro... The Advantage of PBT Additive Masterbatch in Anmei Low-shrinkage PBT masterbatch is one of Anmei's best-selling products mainly used for 5G fiber jackets. Anmei PBT can bring: Your satisfaction is important to us! Email us your questions about engineering plastic and masterbatch products and more. As a plastic engineering inc, Anmei provides pa6 plastic material, modified polyolefin, master batches, polypropylene masterbatch, slip masterbatch, masterbatch compound, abs and pc material and etc. For more information, please feel free to contact us!

Minimum Order: 1000

Transparent ABS, also called MABS plastic material, which has excellent transparency, impact toughness and good processing properties. The light transmittance of transparent ABS is about 88%, second only to PMMA (91%) and PC (90%). The main manufacturers of this MABS plastic material are LG Chemical, Toray and Denka. Transparent ABS Typical Application Many chemicals will corrode the rubber phase in the ABS resin, causing the transparent ABS to fog. MABS plastic material is widely used in household appliances and kitchenware, consumer goods, automotive and packaging industries. At present, transparent ABS resin is mainly used in small appliances such as TVs and air conditioners, refrigerators, washing machines, floor scrubbers, window cleaners, etc., and parts of transparent windows, double-shot molding TV front frames, and air-conditioning panels sprayed on the back are also made by transparent ABS (MABS plastic). Transparent ABS Processing Detail Here are the processing details of transparent ABS（MABS plastic material）, a kind of ABS engineering plastic. Other Details of Transparent ABS (MABS plastic) Physical Property of Transparent ABS  (MABS plastic) Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties of Transparent ABS  (MABS plastic) Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property of Transparent ABS  (MABS plastic) Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions of Transparent ABS  (MABS plastic) Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C As a masterbatch factory, Anmei provides pa6 plastic material, modified polyolefin, master batches, pa6 gf 15 and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Anmei company specializes in the production of TPU slip masterbatch ingredients and TPU frosted matte masterbatch excellent dispersibility in cast films. Casting film can be compounded with plastic woven cloth during production to be used as shade cloth and tourist tents. TPU anti-block masterbatch is designed to prevent blocking during the extrusion of thin TPU film and improves the bound ability of TPU film. Problem & Solution of Masterbatch Application in Cast Film Problem1: Moisture in the masterbatch or poor heat resistance of the ingredients will cause the cast film to have a network structure. Solution1: Appropriately reduce the temperature of each zone and dry the masterbatch in the cast film production process. Color masterbatch should be chosen pigments with high color strength and good heat resistance, and then strengthen the blowing, and appropriately increase the water temperature. Problem2: The low content of titanium dioxide in the film will lead to the poor hiding power of the cast film. Solution2: Increasing the amount of masterbatch Increasing the content of titanium dioxide in the masterbatch Problem3: Poor pigment dispersion leads to colored spots on the cast film. Solution3: Choosing masterbatch with good dispersibility ingredients. Problem4: The volatile matter in the masterbatch causes smoke during processing. Solution4:  Reducing the extrusion temperature Choosing high-temperature resistant masterbatch As a masterbatch company, Anmei provides pa6 plastic material, modified polyolefin, master batches, poly butylene terephthalate, pbt, pbt material, pbt masterbatch, black masterbatch and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

PC-ABS is a blend of PC and ABS.If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of ABS is good fluidity, but low surface hardness. The blended PC-ABS material retains the advantages. PC-ABS has higher surface hardness, higher rigidity and toughness, and also higher resistance to stress cracking. The mechanical properties of PC and ABS material are somewhere in between. Typical Application of PC/ABS PC/ABS of Anmei Company has passed the SGS laboratory test, and its oil resistance can meet the requirements of 10k times of opening and closing of kitchen appliances without cracking. Processing Detail of ABS chemical resistance Other Details of PC/ABS Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature ​ 80*C As a engineering plastic company, Anmei provides pa6 plastic material, modified polyolefin, master batches, pc abs gf30, pc abs v0, pc abs gf20, pc abs gf10, pc abs fr40, abs pc plastic, pc abs, pc abs material and etc. For pc abs price or more information, please feel free to contact us!

Minimum Order: 1 bags