Motors & Parts

As a bio-organic material, wood will be damaged by environmental factors such as sunlight, water, weather, and biological factors such as pests and diseases. The biggest influencing factor is the change of moisture content, which is easy to cause wood deformation and cracking. Protective wood care wax is coated on the wood to form a protective film to protect the wood from moth-eaten erosion, shrinkage, expansion, or mildew. On the other hand, the texture of the wood is clearer, which improves the beauty of the wood. Protective wax for wood is used in many applications to provide a functional coating. This ranges from where the wood wax is providing a barrier, as a low temperature melting, low viscosity diluent or providing gloss, release or hydrophobicity. Coatings are commonly based on paraffin wax and microcrystalline wax. Petroleum-based raw wax and wax blend can be applied to numerous surfaces to reduce unwanted penetration or interactions of numerous liquids (water, grease, etc) and gases (oxygen, etc.). Other functionalities like specific adhesion, rust prevention or heat seal are enhanced by the addition of functional polymers, resins, pigments, dyes, and other additives. We offer types of floor wax for sale, and the floor wax price is affordable, if you want to buy organic floor wax, please contact us. If you want to know more types of industrial floor wax products, please visit our website.

Minimum Order: 2000

Y 1000kw 1500kw Type High Voltage Ac Motor Squirrel Cage Asynchronous Motor Y series high-voltage motors can be used to drive various general machinery, such as: compressors, water pumps, fans, crushers, cutting machine tools, transportation machinery and other mechanical equipment. It is used as the prime mover in various industrial and mining enterprises such as mines, machinery industry, and power plants. The blowers, coal mills, rolling mills, winches, etc. used for dragging should be specified when ordering. Product advantages 1. All high-voltage motors are tested for temperature rise and load of the system before leaving the factory 2. Vacuum dipping equipment and process Using vacuum dipping equipment, more than two dipping process, 57 years of motor dipping experience, to ensure that the motor can maintain a high insulation state for a long time in a humid and dusty environment, reducing the number of maintenance, and the maintenance cycle is more than 1.2 times longer than similar products; 3. Domestic advanced drying equipment and technology Using advanced drying equipment and drying process, pre-baking, drying, heat preservation, precise temperature and time control, can effectively ensure the effective discharge of moisture, reasonable solidification of insulating paint, and molding, to ensure that the motor can operate in a humid and dusty environment. Maintain high insulation level for a long time; Motor type/Model Y400/450/500/630/710/800 IP Rate IP54/IP44/IP55 Power range 220kw - 2500KW,3500KW IC(cooling) IC611 Voltage 3KV, 6KV, 10KV Poles 2,4,6,8,10,12 Frequency 50HZ/60HZ Insulation F Speed 500/590/740/990/1500/3000RPM Efficiency 84-94.5%

JYQD-V8.8 is very compact size BLDC motor driver board with necessary standard functions,its favorable price and reliable performance are competitive for industrial and commercial applications. Its widely applied by the worldwide clients almost for 8 years,its mature and stable design are competent for many applications. 1: Confirm that the voltage and power paraparameters of the motor not exceed the range as specified. 2:This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (contact us for guidance)

Motor series: low inertia, medium power. Rated output power: 30.0kw. Rated speed: 1500r / min with brake or not: No. Shaft end: Standard (straight shaft). Voltage: 400V type. Protection level: IP65 (p67) hg-sr202bj basic knowledge. Features: low inertia, from low speed to high speed, three modes can be selected, suitable for different application ranges. As a standard production port, hg-sr202bj is installed with 30kW or higher dry flange and feet Application examples: basic knowledge of injection molding machine, semiconductor manufacturing installation, large transmission machinery hg- sr202bj. High resolution encoder 131072p / rev (17 bits). High resolution encoder is included to ensure excellent performance and stability at low speed. All motors are the same size as the previous products and the wiring is compatible. Motor series: low inertia, low power. Rated output power: 0.75KW. Rated speed: 3000r / min. with brake or not: attached. Shaft end: keyway (slotted position). Protection level: IP55, excluding the shaft threading part and the basic knowledge of connector hg-sr202bj. Features: low inertia, suitable for high frequency operation. Application examples: inserter, assembly machinery. Motor series: medium inertia, medium capacity. Use serial pair / incremental encoder. Rated output power: 3.0kw. Rated speed: 1000rpm. With or without band brake: No. Shaft end: straight shaft. The stator structure of AC servo motor is basically similar to that of capacitor split phase single-phase asynchronous motor hg-sr202bj (type selection data). The stator is equipped with two windings whose positions are 90 ° different from each other. One is the excitation winding RF, which is always connected to the AC voltage UF, and the other is the control winding L, which is connected to the control signal voltage UC. Therefore, AC servo motor is also called two servo motors. Motor series: medium inertia, medium power. Rated output power: 3.5kw rated speed: 2000r / min. With brake or not: hg-sr202bj (model selection data) is attached. Shaft end: Standard (straight shaft). Protection level: IP65 (IP67). Features: there are three modes of medium inertia from low speed to high speed, which are suitable for different application ranges. Application examples: transmission machinery, robot, X-Y worktable. High resolution encoder 131072p / rev (17 bit) hg-sr202bj (selection data). High resolution encoder is included to ensure excellent performance and stability at low speed. All motors are the same size as the previous products and the wiring is compatible. Motor series: low inertia, medium power. Rated output power: 6.0kw. Rated speed: 1000r / min. with brake or not: attached. Shaft end: Standard (straight shaft). Protection level: IP65 (IP67) Features: low inertia, from low speed to high speed, three modes can be selected, suitable for different application ranges hg-sr202bj selection manual. As a standard production port, 30kW or higher power is suitable for dry process blue plate (type) installation and foot installation. Basic knowledge of hg-sr202bj. Application examples: injection molding machine, semiconductor manufacturing device, large conveying machinery. High resolution encoder 131072p / rev (17 bits). High resolution encoder is included to ensure excellent performance and stability at low speed. All motors are the same size as the previous products and the wiring is compatible.

Minimum Order: 1 bags

Driver: mr-h ACN series ssc-net compatible AC same service rated output: 0.2KW The same server controller can easily convert the operation module and Fieldbus module through the automation interface At the same time, different fieldbus modules are used to realize different control modes (RS232, RS485, optical fiber, INTERBUS and PROFIBUS), while the control mode of general frequency converter is compared with single-mr-pwcns5. The servo controller is directly connected to the resolver or encoder to form a closed-loop mr-pwcns5 for speed and displacement control, while the general frequency converter can only form an open-loop control system mr-pwcns5 The control indexes of servo controller (such as steady-state accuracy and dynamic performance) are better than general frequency converter. Optical fiber length: 0.5m. Sscneti application cable (standard optical fiber used in the control cabinet). Connector for cn1a and cn1b, Mitsubishi Shenji general AC servo amplifier melcervo-j3 series mr-pwcns5, rated output: 5.0kw. Interface type: sscnet Ⅲ optical fiber communication type. Power specification: three-phase AC400V. By using sscnet III high-speed serial communication with the fastest communication cycle of 0.44ms between the motion controller and the servo amplifier, a fully synchronous control system can be constructed. Just insert the special optical fiber into the connector to form the sscnet network, which greatly reduces the wiring work and the possibility of miswiring. Due to the use of optical fiber communication, the anti noise ability is greatly improved, and the original Mitsubishi mr-pwcns5 can realize long- distance wiring up to 800m (the maximum 50m x16 axis between stations) Provide servo amplifier mr-j3-b-rj006 meeting the full closed-loop control function. It is suitable for the optimization and adjustment of the same clothes of dry machinery! More advanced optimization adjustment function and control function to maximize the mechanical performance. Mitsubishi Electric general AC servo amplifier melcervo - J3 series. Rated output: 7.0kw original Mitsubishi mr-pwcns5 interface type: sscnet Ⅲ optical fiber communication type. Special specification: full closed loop control type. Power specification: three phase ac200v. High precision and high response positioning control. The full closed-loop control with high response can be realized through double feedback control, The dual feedback control can be performed when switching between the servo motor encoder and the load side encoder. Mr-j3-b-rj006 can be used with linear encoders from many manufacturers. Users can build the original Mitsubishi mr-pwcns5 system according to their own accuracy requirements. The ABS linear encoder with serial interface can easily build an absolute position detection system without installing a battery on the servo amplifier. Flexible system configuration. Higher positioning accuracy of negative cutting side can be achieved! Length of line: 5m P grade: IP67. Bending life: standard. Dry he-kp / hf-mpihf-sp / hf-jp / hc-lp / hc-up series for encoder cable. Optical fiber length: 40m. Sscnet Ⅲ cable (long-distance optical fiber, high bending life). Connector for cn1a and cn1b, 1-axis servo amplifier. Mitsubishi universal AC servo amplifier melcervo-j4 series. Rated output: 11.0kw. Interface: sscnet Ⅲ / h. Power supply: two-phase AC400V Only servo amplifiers above 0.6kw and 1kW. The same server amplifier supporting sscnet Ⅲ / h. A fully synchronous system using high-speed serial optical communication can be established. It can be combined with the servo system controller to maximize the functional performance of the servo system Mitsubishi DC servo motor. Improve mechanical performance through high-performance motor. By improving the resolution and processing speed of the encoder Make the rotary servo machine have higher precision positioning performance and smoother rotation performance. Connector kit for motor power supply. Just turn on the one click adjustment function to adjust the servo gain of Mitsubishi DC servo motor, including mechanical resonance filter, high-end seismic control II, low-pass zhenwave device. Easily start the advanced anti-seismic function to maximize the mechanical performance. And can automatically implement the responsiveness setting required for immediate and automatic adjustment.

Minimum Order: 1 bags

Features: 1. Wide Speed Range, Flat Torque 2. Compact And High Power 3. Excellent Speed Stability 4. High Efficiency And Energy-Saving Wire Diagram: Type Color Functions UL1061 AWG26 Red Vcc Blue Ha Green Hb White Hc Black GND UL1061 AWG20/24 Yellow Phase U Red Phase V Black Phase W Driving Motor Specification: Item Unit JQ36RBL40-24-4818A JQ36BL57-24-4524A Number of poles 4 4 Number of Phase 3 3 Rated Voltage VDC 24 24 No-Load Speed rpm 7000 5800 Rated Speed rpm 4800 4500 Rated Torque mN.m 36 50 Rated Power W 18 24 Peak Torque mN.m 108 150 Peak Current A 3.7 4.1 Line to Line resistance ohms@20℃ 2.4 2 Line to Line Inductance mH 2.1 2.0 **Notes: Above is standard motor, we can be designed &manufactured with customized request!!

Electromagnetic contactor (contactor) refers to an electrical appliance that uses the current flowing through the coil to generate a magnetic field in industrial electricity to close the contact so as to control the load. The contactor is composed of electromagnetic system (armature, stator core, electromagnetic coil), contact system (normally open contact and normally closed contact) and arc extinguishing device. Structural composition Electromagnetic contactor is mainly composed of transmission device (electromagnetic mechanism), contact device (actuator) and arc extinguishing device. 1. Electromagnetic mechanism The electromagnetic mechanism includes three parts: moving core (armature), static core and electromagnetic coil. The electromagnetic coil is connected with current to generate electromagnetic suction and drive the contact to act. Electromagnetic mechanism is one of the important parts of electromagnetic contactor. The electromagnetic mechanism is composed of coil, iron core (static iron core), armature (moving iron core), pole shoe, iron yoke and air gap. The coil and iron core in the electromagnetic mechanism do not move in the working state; The armature is movable. The electromagnetic mechanism converts the electromagnetic energy generated by the electromagnetic coil into mechanical energy through the action state and action process of the armature and the corresponding mechanical mechanism to drive the contact to close or open, so as to realize the control purpose of the controlled circuit. 2. Contact device There are many structural forms of contact, which can be divided into: main contact and auxiliary contact according to the control circuit; The contact is divided into normally open contact and normally closed contact according to its original state; The contact is divided into bridge contact and finger contact according to its structural form. 3. Arc extinguishing device Arc extinguishing cover is an insulated and high temperature resistant arc extinguishing device made of clay and asbestos cement. It is a simple arc extinguishing device. When using the arc extinguishing cover device to extinguish the arc, the longitudinal seam arc extinguishing method is generally used in the arc extinguishing cover. Common arc extinguishing devices: arc extinguishing cover (arc resistant clay, asbestos cement and arc resistant plastic), arc extinguishing grid (arc resistant grid sheet copper plated thin steel sheet), magnetic blowing arc extinguishing device (an arc extinguishing coil is connected in series in the contact circuit). 4. Other components, including reaction spring, buffer spring, transmission mechanism and shell, etc.

Minimum Order: 1 bags

Motor series: low inertia, low power. Rated output power: 0.1kw. Rated speed: 3000r / min. with brake or not: attached. Shaft end: keyway (slotted position). Protection level: IP55, excluding the shaft threading part and the basic knowledge of connector hg-kr73j. Features: low inertia, suitable for high frequency operation. Application examples: inserter, assembly machinery. Motor series: flat type, medium and small power. Rated output power: 0.75KW. Rated speed: 2000r / minhg-kr73j with brake or not: No. Shaft end: Standard (straight shaft). Protection level: IP65 (IP67). Features: the flat design makes it more suitable for installation in a narrow space. Application example: basic knowledge of robot and food manufacturing machinery hg-kr73j. High resolution encoder 131072p / rev (17 bits). High resolution encoder is included to ensure excellent performance and stability at low noise. All motors are the same size as the previous products and the wiring is compatible. Type: ha-fh series. Rated output: 0.2KW. Rated speed: 3000r / min. Electromagnetic braking: Yes. The loss control technology of AC co serving motor itself has become increasingly perfect and popular. From the perspective of real-time operating system, it is only a functional module that needs real-time response processing. The multi-function and intelligent requirements of the dry controller, a large number of signal processing, and the establishment and operation of various mathematical models to meet the needs of control, Network communication and other functional modules will operate correctly and reliably under the unified scheduling and management of the real-time operating system. Therefore, the next generation of servo drive controller will be the basic knowledge of hg-kr73j. Rated output: 2.0kw Rated speed: 3000r / min. electromagnetic braking: attached. Power supply: 200V. Suitable for high frequency operation of medium capacity and low inertia products. To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt ip65100 sites, and there are 100 different drive controls. In order to meet diversified and detailed on-site needs as much as possible, In the configuration of mr-j4 product line, it provides rich servo amplifier and servo motor products. It can meet the different needs of different customers. Type: hc-pq. Output power: 0.2KW. Rated speed: 3000r / min. Electromagnetic braking: Yes. Key shaft: D-type shaft. Motor: the material, structure and processing technology of the servo motor are much higher than those of the AC motor driven by the frequency converter, that is, when the driver outputs the power supply with rapid changes in current, voltage and frequency, the servo motor can produce response action changes according to the power supply changes, The response characteristics and anti overload capacity are much higher than those of AC motor driven by frequency converter, The serious difference in motor is also the fundamental reason for the different performance of the two. Hg-kr73j user manual. That is to say, it's not that the frequency converter can't output the power signal that changes so fast, but that the motor itself can't respond, Therefore, when setting the internal algorithm of frequency conversion, the corresponding overload setting hg-kr73j user manual is made to protect the motor. Of course, even if the output capacity of the frequency converter is not set, it is still limited. Some frequency converters with excellent performance can directly drive the servo motor.

Minimum Order: 1 bags

Brand: Mitsubishi Product Name: plug set model: mr-ccn1 Content: servo amplifier connector. Purpose: for mr-je-b input and output signals. Motor series: low inertia, small capacity. Use serial pair / incremental encoder. Rated output power: 0.1kw. Rated speed: 3000rpm. With or without holding brake: without holding brake. Without GB. Shaft end: straight shaft Mitsubishi mr-ccn1. The rotor inside the servo motor is a permanent magnet. Unw two-phase electricity controlled by the servo amplifier forms an electromagnetic field. The rotor rotates under the action of this magnetic field. At the same time, the motor and its own encoder feed back signals to the driver. The driver compares the feedback value with the target value and adjusts the rotation angle of the rotor mr-ccn1 The accuracy of servo motor depends on the resolution of encoder. Servo motor series: medium inertia, small capacity. Rated output: 7.0kw. Rated speed: 2000r / min Electromagnetic braking: without Mitsubishi mr-ccn1 oil seal: attached (Note 1, note 2, note 3). Power supply: 200V. Note 1 It can be supported by hg-kr and hg-mr series above 0.1kw and hg-sr series. Note 2 With reducer, oil seal is not equipped. Note 3 The boundary dimension standards of hg-kr and hg-mr series servo motors with oil seal are different. Realize the stable driving of medium capacity and medium inertia products. Through Jiahua structural design, Mitsubishi mr-ccn1 is realized. High speed & high torque. Shorten positioning time and realize high-speed equipment. Reduce power on torque ripple. By combining the number of poles and slots of Jiahua motor, the power on torque ripple is greatly reduced, and the smooth and constant speed operation of the equipment is further realized. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67. Servo motor series: low inertia, medium and large capacity. Rated output: 9.0KW Mitsubishi relay connector kit. Rated speed; 3000r/min。 Electromagnetic braking: without. Power supply: 200V. Suitable for high frequency operation or high acceleration and deceleration operation of medium, large capacity and low inertia products. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67. High speed & high torque. Shorten positioning time and realize high-speed equipment. In 100 sites, there are 100 different drive controls. In order to meet diversified and detailed site needs as much as possible, In the configuration of mr-j4 product line, the main rich co service amplifier and co service motor product Mitsubishi relay connector kit are provided, which can meet the different needs of different customers. Servo motor series: medium inertia, small capacity. Rated output: 0.85kw. Rated speed: 1000r / min Mitsubishi relay connector kit. Electromagnetic braking: without. Power supply: 200V. Realize the stable driving of medium capacity and medium inertia products. Through optimized structural design, the small total length in the industry is realized, High speed & high torque, shorten positioning time, realize high-speed equipment and reduce power on torque ripple. By combining the number of poles and slots of Jiahua motor, the torque ripple of power on is greatly reduced, and the smooth and constant speed operation of the equipment mr-ccn1 is further realized. To improve the environmental resistance, the series products of hg-sr and hg-jr adopt IP67 Mitsubishi mr-ccn1. Length of line: 10M. IP grade: IP65. Direct connection type. The cable is unshielded. Bending life: standard. Connector kit for motor electromagnetic brake. Cable for electromagnetic brake: used for hf-kp / hf-mp series (led out from the same side of motor shaft).

Minimum Order: 1 bags

Machine Model : HG-KR13BJ Servo motor series: low inertia, small capacity. Rated output: 0.1kw. Rated speed: 3000r / min. Electromagnetic braking: attached.Oil seal: attached (Note 1, note 2, note 3). Power supply: 200V. Note 1 It can be supported by hg-kr and hg-mr series above 0.1kw and hg-sr series. Note 2 With reducer, oil seal is not equipped.Note 3 The boundary dimension standards of hg-kr and hg-mr series servo motors with oil seal are different. The rated speed is 3000r / min and the large speed is 6000r / min. The high torque is 350% of the rated torque, realizing high torque in the field of high rotation. It only supports hg-kr series products. Built in position encoder with high resolution.Provide standard high-resolution position encoder (4.194304p/rev (22bit)). Realize more positioning function. To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt IP65. Three general purpose AC servo amplifiers melcervo-j2- super series. Rated output: 0.4KW. Built in positioning function.Voltage: 3- phase ac200vac or single-phase AC230V. The CPU integration of Mitsubishi hg- kr13bj greatly improves the responsiveness of products.Due to the application of CPU, the responsiveness is greatly improved. The frequency response of the speed loop is increased to more than 550hz. Hg- kr13bj mr-j2-super series is a good device for high-speed positioning applications. Easy adjustment.Model adaptive control / real-time automatic tuning. Type: hf-se servo motor, medium inertia, medium power, rated output power: 2.0kw.Rated speed: 2000r / min Mitsubishi hg-kr13bj. Electromagnetic braking: none. Oil seal: none.The servo motor can control the speed and position accuracy very accurately. The voltage signal can be converted into torque and speed to drive the control object. The rotor speed of the servo motor is controlled by the input signal and can respond quickly in the automatic control system as an actuator.It has the characteristics of small electromechanical time constant, high linearity, starting voltage and so on. The received electrical signal can be converted into angular displacement or angular speed on the motor shaft and output. Mitsubishi hg-kr13bj is divided into DC and AC servo motors. Its main characteristics are:,When the signal voltage is zero, there is no rotation, and the speed decreases uniformly with the increase of torque. The terminal strip of servo amplifier adopts connector to reduce the required wiring time. The connector is located in front of the servo amplifier to facilitate cable connection. The gain can be adjusted conveniently through the real-time automatic tuning function. It is widely used for servo drive, machining equipment and machine tool feeding.For food, packaging equipment and feeding devices. Used in textile machinery, etc. It can improve the performance of the equipment.It is easy to operate and reduce the workload. Enhanced system cost performance.positioning (servo motor encoder resolution: 131072). High responsiveness.Vibration control function through adaptive vibration.The personal computer and servo setting software are used to optimize the tuning. Mitsubishi servo driver has two types of interfaces:Pulse train interface is used for position control and internal speed control.The analog input interface is used for speed control and torque control. Mitsubishi Electric general AC servo amplifier melcervo-j3 series. Rated output: 0.75KW.Interface type: CC link communication type (built-in positioning function) Mitsubishi servo driver.Power specification: single phase ac200v.The positioning operation is realized by setting the position and speed data in the positioning table and receiving the start signal from the main controller. The setting of position, speed and other data in the positioning table and the start and stop operation can be completed through CC link communication. By using mr-j3-d01 to expand I0 unit, the location table selection and location operation can be carried out through di / O instruction. When mr-13-d01 is used, CC ink certificate cannot be carried out.Using the servo amplifier with built-in positioning function, the position, speed and other data can be set through CC link communication. (corresponding to CC link version ver. 1.10)Start, stop and monitor can be realized through CC link communication. Hg- kr13bj serial communication reduces wiring.Through CC link communication, the distributed co server control system can be constructed. The three hg-kr13bj parameter unit mr-pru03 (option) makes the teaching setting, operation and easier. The servo amplifier can be operated by dry speed control.When both stations are occupied, the speed command can be set directly through the remote register.

Minimum Order: 1 bags

Servo motor series: low inertia, medium / high power. Rated output: 20.0kw. Rated speed: 1000r / min. Electromagnetic brake: none. Shaft end specification: Standard (straight shaft). Features: there are three types of low inertia, medium and high speed models, which are suitable for different applications. As a standard, 30kW and above servo motors can be installed with flanges or brackets. Yiling Tongfu motor user manual. IP grade: IP44. Application example: 1. Injection molding machine hg-sr352bj 2. Semiconductor manufacturing equipment. 3. Large material conveying system. 4. Press. The rich motor product line can optimize the performance of the machine. It has a rich motor product line including rotary servo motor, linear servo motor and direct drive motor. Motor series; Medium inertia, medium power. Rated output power: 2.0kw Mitsubishi servo motor user manual. Rated speed: 2000r / min. With or without brake: attached. Shaft end: Standard (straight shaft). Protection level: IP65 (p67) Features: there are three modes of medium inertia from low speed to high speed, which are suitable for different application ranges. Application examples: transmission machinery, robot, X-Y worktable. High resolution encoder 131072p / rev (17 bits). High resolution encoder is included to ensure excellent performance and stability at low speed. Mitsubishi Tongfu motor user manual. All motors are the same size as the previous products and the wiring is compatible. Motor series: flat type, medium and small power. Rated output power: 1.5kw. Rated speed: 2000r / min. with brake or not: attached. Shaft end: Standard (straight shaft). Protection level: p65 (p67) Features: the flat design makes this model more suitable for installation in a narrow space. Hg-sr352bj user manual. Application examples: robots, food manufacturing machinery. High resolution encoder 131072p / rev (17 bits). High resolution encoder is included to ensure excellent performance and stability at low speed. All motors are the same size as the previous products and the wiring is compatible. Motor: ha-uh type, power: 4.5kw. Speed: 2000r / min According to the type of working power supply: it can be divided into DC motor and AC motor hg-sr352bj user manual. DC motor can be divided into brushless DC motor and brushless DC motor according to structure and working principle.. Brushless DC motor can be divided into permanent magnet DC motor and electromagnetic DC motor. Division of electromagnetic DC motor: series excited DC motor, parallel excited DC motor, separately excited DC motor and compound excited DC motor Hg sr352bj user manual. Permanent magnet DC motor is divided into rare earth permanent magnet DC motor, ferrite permanent magnet DC motor and aluminum nickel cobalt permanent magnet DC motor. Type: hc-pq type Output power: 0.4KW. Rated speed: 3000r / min. electromagnetic braking: none. Key axis: straight axis. In terms of motor: the material, structure and processing technology of servo motor are much higher than that of AC motor driven by frequency converter, that is, when the driver outputs the power supply with rapid changes in current, voltage and frequency, the same server motor can produce response action changes according to the changes of power supply. The response characteristics and anti overload ability are much higher than those of AC motor driven by frequency converter. The serious difference in motor is also the fundamental reason for the different performance of the two. Hg-sr352bj manual. That is to say, it's not that the frequency converter can't output the power signal that changes so fast, but that the motor itself can't respond, Therefore, when setting the internal algorithm of frequency conversion, in order to protect the motor, the corresponding overload setting is made in the user manual of Mitsubishi servo motor. Of course, even if the output capacity of the frequency converter is not set, it is still limited. Some frequency converters with excellent performance can directly drive the servo motor.

Minimum Order: 1 bags

Servo motor series: low inertia, medium / high power. Rated output: 5.0kw. Rated speed: 3000r / min. Electromagnetic brake: none. Shaft end specification: Standard (straight shaft). Features: low inertia, suitable for high-speed / high acceleration and deceleration operation. IP rating: IP67. Application example: 1. Food processing machinery. 2. Printing press. 3. Injection molding machine (11kw, 15kw). 4. Large stamping machine (11kw, 15kw) hg-kr43j The protection grade of hf-sp / hf-jp series servo motor is IP67 (except the shaft through part). Low inertia medium power servo motor (0.5KW ~ 9kw), large speed: 6000r / min (rated speed: 3000r / min), suitable for high-frequency positioning and acceleration / deceleration operations, especially food processing machines and printing machines. Low inertia high-power servo motor without cooling fan (11kw and 15kw), high speed: 3000r / min (rated speed: 1500r / min). Due to the design of no cooling fan, the motor structure is more compact, and the wiring is reduced by using the power connector (compared with the hf-lp series servo motor with the same power, the volume is reduced by about 46% and the weight is reduced by about 34%), which is suitable for high-frequency positioning and acceleration / deceleration operations, especially injection molding machines and large presses. Hf-jp703 (4) / 903 (4) high speed: 5000r / min, servo motor series: flat type, medium capacity. Rated output: 5.0kw. Rated speed; 2000r/min。 Electromagnetic braking: attached. Power supply: 200V. It is suitable for limiting the installation space in medium capacity and flat products. To improve the environmental resistance, hg-kr, hg-mr, hg-rr and hg-ur series products adopt IP65. In 100 sites, there are 100 different drive controls. In order to meet diversified and detailed site needs as much as possible, In the configuration of mr-j4 product line, it provides rich servo amplifier and servo motor products. It can meet the different needs of different customers. Servo motor series: medium inertia, small capacity. Rated output: 0.5KW. Rated speed: 2000r / min. Electromagnetic braking: attached. Power supply: 400V. Realize the stable driving of medium capacity and medium inertia products. Through the optimized structural design, the small total length in the industry is realized. High speed & high torque. Shorten positioning time and realize high-speed equipment. Reduce power on torque ripple. Through the combination of slot speed and torque, the smooth operation of the motor can be further reduced. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67. Servo motor series: low inertia, medium power. Rated output: 0.5KW. Rated speed: 2000r / min Electromagnetic brake: with. Shaft end specification: Standard (straight shaft). Features: low inertia, widely used in general machinery. IP grade: IP65. Application example: 1. Roller feed equipment. 2. Load / unload equipment. 3. High frequency transmission system. The rich motor product line can optimize the performance of the machine. It has a rich motor product line including rotary servo motor, linear servo motor and direct drive motor.

Minimum Order: 1 bags

Product Description Single Phase 110V/220V Micro AC Motor Variable Speed Gear Motor with Speed Controller Product Features 1. High stability:Load power is sufficient, stable operation, and low fatigue after long term use. 2. Various function to motor. 3. Multiple voltage. 4. Wide power range. 5. Variable speed gear motor, compatible with speed controller MICRO AC MOTOR 6W 15W 25W 40W/60W 90W/120W 140W/160W 180W/200W 250W Reduction Ratio 3~200 3~200 3~200 3~200 3~200 3~200 3~200 3~200 50HZ Rated torque 0.13~3N.M 0.30~5N.M 0.50~8N.M 0.77~10N.M(40W) 1.19~20N.M(60W) 1.79~20N.M(90W) 2.25~20N.M(120W) 2.62~44N.M(140W) 2.76~44N.M(160W) 3.1~44N.M(180W) 3.44~44N.M(200W) 4.26~44N.M 60HZ Rated Torque 0.11~3N.M 0.25~5N.M 0.41~8N.M 0.64~10N.M(40W) 0.99~20N.M(60W) 1.49~20N.M(90W) 1.87~20N.M(120W) 2.19~44n.m(140W) 2.48~44N.M(160W) 2.76~44N.M(180W) 2.87~44N.M(200W) 3.83~44N.M MICRO DC MOTOR 60DC 70DC 80DC 90DC 100DC Reduction Ratio 3~200 3~200 3~200 3~200 3~200 Output Bearing speed 533~8 533~8 533~8 533~8 600~9 Rated torque 0.129~3n.m 0.26~5n.m 0.386~8n.m 0.52~20n.m 2.578~44n.m

The analog input module is a device that collects the remote field analog signal to the computer. It uses RS-485 bus as the data communication line to provide the function of analog to 485. It can input the analog to the module at the same time and transmit it to the computer through RS-485 bus. Since RS-485 interface is adopted as the communication interface, it can combine multiple modules to transmit more channels of analog signals, and can be configured dispersedly on 485 lines, distinguished by address code, and can be directly connected to the configuration software of Modbus RTU protocol. Functional features 1. Collect multi-channel analog input, adopt industrial wiring terminal, and support guide rail installation. 2. The 485 interface input is connected with the computer, and the 485 interface provides photoelectric isolation. 3. Modbus RTU communication protocol is adopted to facilitate customers to unify to the upper computer management platform. 4. The analog module can be used in cascade through 485 interface, which facilitates the expansion of the system. technical parameter 1. Hardware configuration: 9-way di / PI, 8-way AI, 5-way do, 3-way serial port. 2. Storage capacity: 4m. 3. Communication protocol: Standard MODBUS-RTU protocol; Other communication protocols can be embedded. 4. Power supply: 10V ~ 30V DC. 5. Working environment: temperature: - 40 ~ + 85 ℃; Humidity: ≤ 95%. 6. Installation method: disc mounted. 7. Overall dimension: 120x120x95mm.

Minimum Order: 1 bags