Passive Components

Bruide B-3065 glow heater plug removal tool is designed for removing the heater element efficiently without to remove the cylinder head. The thread is tapped by drilling a hole in the broken component so that it can be extracted with the provided glow plug adapter. Scope of Delivery of B-3065 Glow Plug Removal Tool Seven drilling tapping guides Five glow plug extraction adaptors with either a M8 or M10 thread. We can offer kinds of automotive tools for sale, if you have needs, please contact us.

Pinch Valve is made up of two parts: the upper side is the body, and the lower side is the connection that can hold the pipe. Keyto pinch valve has three series. The mainly different is the port size. The port size means the pipe diameter you want to use. In addition to port size, we have many functions to choose from. like single port or dual port, and different installations and different voltages to meet your unique needs. Types of Pinch Valves Pinch Valve 1213 Double Channel Pinch Valve, the medium only resists in the tube and little cross contamination, tube size recommend: 1.5mm*3mm/1.6mm*3.2mm. Pinch Valve 1224 Single Channel Pinch Valve, the medium only resists in the tube and little cross contamination, tube size recommend: 2mm*4mm. Pinch Valve 1269 Single Channel Pinch Valve, the medium only resists in the tube and little cross contamination, tube size recommend: 6mm*9mm. Advantages of Pinch Valves 01 Hose easily cleaned, ideally for testing impurity sample, waste discharge 02 Suitable for inspecting samples contain impurities / particles or not 03 Applications in occasion which need to avoid cross contamination between samples What is a Pinch Valve Used for? Keytos' pinch valve uses are as follows: Keyto mainly offers the series 1224, 1213 and 1269 pinch valves. The pinch valves are typically used in applications such as the discharge of samples containing impurities (especially flocculent impurities) or particles, the pre- treatment of water samples, electrolyte instrumentation, and the pharmaceutical industry. The 1269 series of pinch valves are mainly used in the environmental industry. FAQs of Pinch Valves  Can a pinch valve regulate flow? The pinch valve cannot be used to regulate flow because it is only available in two states, fully open or fully close, and the degree of opening cannot be adjusted at will.  How doe s a pinch valve stop flow? Two types of solenoid pinch valve are available: N.C. and N.O. Normally open valve(N.O.): the solenoid is powered to drive the pressure plate action, then the pressure plate clamps hose tightly, so as to stop the flow. Normally open valve(N.C.): the initial state of a normally close valve is that of a stop-flow, and the stop-flow principle is the same as that of a normally open valve. The difference is that normally open valve stops flow when powered on and normally closed valve stops flow when powered off. What are the components of pinch valve? Main components of the pinch solenoid valve: solenoid, valve body, spring, moving iron core, hose pressure plate, mounting plate.

Model Number:UIYMC66A9T10 Frequency Range:9.0~10.0GHz Bandwidth:45% Insertion Loss:0.5dB Isolation:20dB VSWR:1.25 Forwa , rd Power:15W Reverse Power:15W Connector Type:Microstrip Temperature:-55~+85°C Dimen , sion:6*6*2.5mm

Minimum Order: 1 bags

Model Number:UIYCT50AN124 Frequency Range:DC-12.4GHz VSWR:1.3 Power:50W Conne , ctor Type:N Male Impedance:50Ω

Minimum Order: 1 bags

Model Number:UIYCA25AN3A20 Frequency Range:DC-3GHz Power:25W Attenuation Value:20dB Attenuation Tolerance:±0.8dB VSWR:1.2 Connector Type:N-M/N-F Impedance:50 Ω

Minimum Order: 1 bags

Model Number:UIYDC1212B2800T3100 Frequency Range:2800~3100MHz Bandwidth:30% Insertion Loss:0.4dB Isolation:20dB VSWR:1.25 Forwa , rd Power:60W Reverse Power:60W Connector Type:TAB Temperature:-40~+85°C Dimension:12 , .7*12.7*8mm

Minimum Order: 1 bags

Model Number:UIYDC2525A600T700 Frequency Range:600~700MHz Bandwidth:30% Insertion Loss:0.3dB Isolation:21dB VSWR:1.2 Forwar , d Power:200W Reverse Power:200W Connector Type:TAB Temperature:-40~+85°C Dimension:25 , .4*25.4*10.5mm

Minimum Order: 1 bags

Bluetooth technology was first known to us as it appeared on mobile phones, replacing the traditional infrared transmission. After continuous development, Bluetooth devices have been used in smart switches to assist the functions of smart switches. Our bluetooth relay switch module combined with the traditional mechanical wall switch, not only makes the wall switch into the intelligent switch but also maintains the unity of the original wall switch and the whole home decoration. Types Of Bluetooth Switch Module 1 Gang Bluetooth Switch Module 2 Gangs Bluetooth Switch Module Advantages of Bluetooth Switch Module Compatible and Synchronous Compatible with most Bluetooth 4.0 mesh gateway. App control is synchronized with the manual switch. Low Power Consumption Bluetooth relay module is with the lowest power consumption than other smart ways. Distance Limits With no Bluetooth mesh gateway, the distance between Phone and Device is 10m. With Bluetooth Mesh Gateway, the distance between Phone and Device can be more than 10m. Quick Speed Connection Fast connection to smartphone APP by helping with Bluetooth 4.0 chip. Home Automation Through APP and voice control, you can get multiple functions to make your home smart. Such as Timing, countdown, memory, schedule, group, share etc. User Friendly Easy install and wire connection behind the existing switch, keep function of manual switches. Voice Control You can voice command the connected lights or devices via Amazon Alexa/Echo/Dot, Google assistant, IFTTT etc. Quality & Warranty CE, RoHS approved by Authoritative Intertek test lab. 2 Years warranty. Accept customer customization for logo, color box, etc. Aihomestyle provides bluetooth relay, relay module bluetooth, bluetooth relay kit, bluetooth module switch, zigbee roller shutter switch and etc. For more information, please feel free to contact us!

Minimum Order: 2000

Model Number:UIYDI6075A136T174P200 Frequency Range:136~174MHz Bandwidth:40% Insertion Loss:0.5dB Isolation:22dB VSWR:1.2 Forwar , d Power:200W Reverse Power:100W Connector Type:TAB Temperature:-30~+70°C Dimension:60 , *75*28mm

Minimum Order: 1 bags

Model Number:UIYSC12A55T6 Frequency Range：5500~6000MHz Bandwidth:20% Insertion Loss:0.3dB Isolation:23dB VSWR:1.2 Forwar , d Power:30W Reverse Power:30W Connector Type:SMT Temperature:-40~+85°C

Minimum Order: 1 bags

PCB Manufacturing Description: 1. Quick-turn and flexible delivery. 2. Support a wide range of PCBs: high-layer, multi-layer, rigid-flex, high frequency, high speed, etc. 3. Professional supplier positioning. 4. Seamless link from prototype to mass production. 5. Whole-flow quality assurance, IPC, Special industry inspection standard.

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminium Oxide Paint Stripping Disc for Angle Grinder with Shank (AO) Grit Size Table Corresponding To Raw Materials Aluminium Oxide Paint Striper Disc with Shank (AO) Paint Striper Disc with Shank Size Table Aluminium Oxide Paint Striper Disc with Shank (AO) Specification: Max. RPM: 7000~10000 RPM Outer Diameter: 100mm/115mm/125mm/150mm/180mm Center Hole Diameter: 16mm/22mm Other Raw Materials: Silicon Carbide (SC) Aluminium Oxide Paint Striper Disc with Shank (AO) Materials that can be worked: Aluminium Cobalt-based alloys Other non-ferrous metals High-temperature-resistant materials Nickel-based alloys (e. g. Inconel and Hastelloy) Bronze Hard non-ferrous metal Titanium Titanium alloys Copper Soft non-ferrous metal Brass Zinc Stainless steel (INOX) Grey/nodular cast iron (GG/GJL, GGG/GJS) Annealed cast iron Thermoplastics Elastomers Fibre-reinforced duroplastics (GRP, CRP) Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC) Steel, cast steel Aluminium Oxide Paint Striper Disc with Shank (AO) Applicable Industries Applications Surface work Roughening Cleaning Alum , inium Oxide Paint Striper Disc with Shank (AO) Applicable Industries Safety Warning of Aluminium Oxide Paint Striper Disc With Shank (AO) Instructions: Safety Warning of Aluminium Oxide Paint Striper Disc With Shank (AO) Please try to choose an operation indoor environment and wear protective guards and goggles. Never exceed the recommended maximum permitted rotational speed for safety reasons. In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels. Safety Warning: The clamping length between shank and grinders should be more than 15mm. Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use. Keying abrasives is a family-owned company established in 1997, the business is expending to more than 15 countries, focus on abrasive tools, custom abrasives materials and service grinding and polishing industrials. If you want to know more kinds of spindle flap wheel, please visit our website.

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminium Oxide Paint Paint Stripe Disc With Central Hole (AO) Grit Size Table Corresponding To Raw Materials Aluminium Oxide Paint Paint Stripe Disc With Central Hole (AO) Specification: Max. RPM: 7000~10000 RPM Outer Diameter: 100mm/115mm/125mm/150mm/180mm Center Hole Diameter: 16mm/22mm Other Raw Materials: Silicon Carbide (SC) Aluminium Oxide Paint Paint Stripe Disc With Central Hole (AO) Materials that can be worked: Aluminium Cobalt-based alloys Other non-ferrous metals High-temperature-resistant materials Nickel-based alloys (e. g. Inconell and Hasteloy) Bronze Hard non-ferrous metal Titanium Titanium alloys Copper Soft non-ferrous metal Brass Zinc Stainless steel (INOX) Grey/nodular cast iron (GG/GJL, GGG/GJS) Annealed cast iron Thermoplastics Elastomers Fibre-reinforced duroplastics (GRP, CRP) Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC) Steel, cast steel Aluminium Oxide Paint Paint Stripe Disc With Central Hole (AO) Applicable Industries Applications Surface work Roughening Cleaning Alum , inium Oxide Paint Paint Stripe Disc With Central Hole (AO) Applicable Industries Safety Warning of Aluminium Oxide Paint Paint Stripe Disc With Central Hole (AO) Instructions: Please try to choose an operation indoor environment and wear protective guards and goggles. Never exceed the recommended maximum permitted rotational speed for safety reasons. In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels. Safety Warning: The clamping length between shank and grinders should be more than 15mm. Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use. Now the price of pressure washer to strip deck is affordable, if you have needs, please contact us. As a professional abrasives company, we have kinds of related products for sale, if you have needs, please contact us. Keying Abrasives is a family-owned company, estabilished in 1997. Keying is focusing on manufacture and supply quality advanced abrasive and grinding tools, including various series of abrasive tools, like mounted flap wheel with shaft, unmounted flap wheels, flap discs, non woven grinding and polishing wheels/discs and other abrasive tools, for different grinders and fabracation industry application purpose.

Aluminum Oxide Fiber Disc AO KEYING velcro-backed abrasive discs are also known as one hook and loop discs, which are mainly suitable for fine grinding, mechanical processing, deliberating, wood products manufacturing, 3C products, and parts manufacturing industries. Especially can be universally used on metal, wood, plastic, and paintworks. The most important use is in the polishing and polishing of the last step of the process, cleanliness can achieve really smooth effect. Specifications of Aluminium Oxide Velcro-backed Abrasive Discs (AO) Application ·Removal Of Rust Brand KEYING Commodity Code FSFS361+Flat+4"+Grit+AO ·Weld Preparation ·Removing Discolouration ·Sanding Down ·Surface Finishing ·Deburring ·Smoothing And Blending Of Flaws Compatible Tool Angle Grinder Country Of Origin China Raw Material Silicon Carbide Backing Fibre For Use On Glass, Stone, Concrete, Granite, Marble, Ceramic, Rubber, Plastic, Fiberglass Grit Size 16#, 24#, 36#, 40#, 50#, 60#, 80#, 100#, 120# Diameter Metric 4"/4.5"/5"/6''/7'' Industries Automobile Manufacturing, Construction, Light Industry, Shipbuilding, Machinery Manufacturing Hole Diameter 16mm/22mm Maximum RPM 8500-15300 Type of hole 4 Slotted, 8 Slotted, 6Slitted, Flat Standard Pack Quantity 25pcs Features of Aluminium Oxide Velcro-backed Abrasive Discs (AO) Deal for anding non ferrous metals, glass, stone, granite, ceramic and wood materials. Having standard vulcanized fibre backing and Silicon Carbide abraxive grains. Aluminium Oxide Velcro-backed Abrasive Discs (AO) Materials that can be Worked: Advantages A versatile all-around product Excellent price/performance ratio Aluminium Oxide Abrasive Disc (AO) Applicable Industries Application Removal of rust Weld preparation Removing discolouration Sanding down Surface finishing Deburring Smoothing and blending of flaws Recommendations for Use Use fibre discs conforming to ISO 15636 with backing pads on commercially available angle grinders. Use grinding oil which is suitable for the material in order to considerably increase the tool life and abrasive performance of the tools. Matching Tool Drives Safety Instructions of Aluminium Oxide Abrasive Disc (AO) How To Aluminium Oxide Abrasive Disc (AO) Instructions: Safety Instructions of Aluminium Oxide Abrasive Disc (AO) Please try to choose operation indoors environment and wear protective guards and goggles. Never to exceed the recommanded maximum permitted rotational speed for safety reasons. In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s. Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels. Safety Warning: The clamping lenght between shank and grinders should be more than 15mm. Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use. As a professional abrasives factory, we have kinds of related products for sale, if you have needs, please contact us. We also have different kinds of mounted flap wheel for sale, if you are interested, please leave us a message.