Power Supplies & Equipment

Condition: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. Our Service: Terms: We ships worldwide and accepts T/T and Paypal. All items are subject to availability and passing our QA testing and inspection. Turnaround Time: Standard order processing is 1-2 business days plus shipping method chosen. Rush and off-hours service available for an additional fee. Packaging and Handling: Items are safely packaged in custom shipping cartons for protection. Shipping: We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded. Call to use a shipping service other than the ones listed. International Customers are responsible for all Customs fees, VAT and other fees applied by their respective countries. All shipments are fully insured

Minimum Order: 1 bags

Brand: Mitsubishi Product Name: servo driver model: mr-j4-70b1 axis servo amplifier. Mitsubishi universal AC servo amplifier melcervo-j4 series. Rated output: 0.75KW. Interface: sscnet Ш/ H。 Power supply: = phase ac200v The same server amplifier supporting sscnet Ⅲ / h. A fully synchronous system using high-speed serial optical communication can be established. It can be combined with the servo system controller to give full play to the functional performance of the servo system. By supporting the seismic algorithm of three inertial equipment, it can vibrate at two low frequencies at the same time. Mr configurator2 enables easy adjustment The low-frequency aftershock effect below 100Hz generated by the front end of the boom or the main body of the device can be effectively reduced, and the time required for aftershock control can be effectively shortened The accuracy of arc trajectory can be improved in the trajectory control of XY slide, At the same time, it can effectively control the quadrant protrusion caused by friction and distortion, Servo motor series: low inertia, medium and large capacity. Rated output: 15.0kw. Rated speed; 1500r / min. electromagnetic braking: without. Power supply: 200V. It is suitable for high-frequency operation or high acceleration and deceleration operation of medium, large capacity and low inertia products. Mitsubishi mr-j4-70b improves the environmental resistance. Hg-sr and hg-jr series products adopt IP67. High speed & high torque, shorten positioning time and realize high-speed equipment mr-j4-70b100 sites, there are 100 different drive controls. In order to meet diversified and detailed site needs as much as possible, In the configuration of mr-j4 product line, it provides rich servo amplifier and servo motor products. It can meet the different needs of different customers. Servo motor series: low inertia, small capacity. Rated output: 0.1kw Mitsubishi mr-j4-70b, rated speed: 3000r / min, electromagnetic braking: without. Power supply: 200V. The rated speed is 3000r / min and the large speed is 6000r / min. The high torque is 350% of the rated torque, realizing high knowledge transfer in the field of high rotation. It only supports hg-kr series products. Built in position encoder with high resolution Provide standard high-resolution position encoder (4194304p / rev (22bit)) to achieve more positioning function of Mitsubishi mr-j4-70b, Improve the environmental resistance. IP65 is adopted for hg-kr, hg-mr, hg-rr and hg-ur series products. Mitsubishi Electric general AC servo amplifier melcervo-j3 series. Rated output: 22.0kw. Interface type: CC link communication type (built-in positioning function) Mitsubishi servo driver. Power specification: three phase AC400V The positioning operation is realized by setting the position and speed data in the positioning table and receiving the start signal from the main controller. The setting of position, speed and other data in the positioning table and the start and stop operation can be completed through CC link communication. When the servo unit (dj-01-link) and (DJ-3) can not be used for positioning through communication, dj-01-link can be used for positioning. Using the servo amplifier with built-in positioning function, the position, speed and other data can be set through CC link communication. (corresponding to CC link version ver. 1.10) The Mitsubishi servo driver can be started, stopped and monitored through CC link communication. Serial communication reduces wiring The distributed servo control system can be constructed through CC link communication. The parameter unit mr-pru03 (option) makes parameter setting, operation and easier. The servo amplifier can be operated by dry speed control. When both stations are occupied, the speed command can be set directly through the remote passenger memory. Servo motor series: medium inertia, small capacity, rated output: 2.0kw. Rated speed: 1000r / min. electromagnetic braking: attached. Power supply: 200V. Realize the stable driving mr-j4-70b of medium capacity, medium inertia products, and realize the small total length in the industry through optimized structural design. High speed & high torque Mitsubishi mr-j4-70b can shorten positioning time, realize high-speed equipment and reduce power on torque ripple. By combining the number of poles and slots of Jiahua motor, the power on torque ripple is greatly reduced, and the smooth and constant speed operation of the equipment is further realized. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67

Minimum Order: 1 bags

The next generation servo product J4 is launched with safety specifications and eco correspondence. This product not only aims at the fastest speed in the industry, but also introduces the concept of the integration of human, machinery and environment into this product. ■ Mechanical aspect: the fastest speed frequency response performance of 2.5KHz in the industry is combined with the standard system equipped with 4194304 (22bit) decomposition for absolute position detector equipped with rotary servo motor. ■ Human aspect: towards human safety and comfortable environment, safety specifications correspond to the enrichment of easy to user design. ■ Environment: multi axis integrated servo driver with advanced function in eco era. ■ Inheritance: the combination of servo driver and controller of the previous model has a very corresponding design. Characteristic: Online products Generally, rotary servo, linear servo and direct drive servo correspond to the specifications of economic and environmental protection models with 2-axis integration and 3-axis integration. SSCNETⅢ/H Equippe , d with Mitsubishi's latest servo communication network, the data communication is the evolution of full duplex 150Mbps, the high response acceleration of the system, and the new generation products of optical fiber network are launched at the same time as J4. Advanced one touch functionality After pressing the setting torque once, the servo gain parameters such as mechanical common vibration filter and advanced vibration control filter II can be adjusted to help engineers easily achieve the optimal servo adjustment operation. Advanced vibration control filter II It has 3 low-frequency vibration control algorithms of inertial system, which can suppress two low-frequency vibrations at the same time. The vibration in the front end of the body and the corresponding device will be suppressed. Mr-j4 servo motor mr-j4-700b, a new product of Mitsubishi Electric in Japan Mr-j4 servo motor, a new product of Mitsubishi Electric in Japan 1、 Servo amplifier with conventional interface can correspond to 4mpps pulse frequency at most. 2、 Driver for motion control network sscnet Ⅲ / h. It is equipped with full closed-loop control as standard, which can drive rotary servo motor and linear servo motor. 3、 Driver for motion control network sscnet Ⅲ / h. It can drive two servo motors at the same time, saving installation space and wiring. It is equipped with full closed-loop control as standard, which can drive rotary servo motor and linear servo motor. 4、 Driver for motion control network sscnet Ⅲ / h. It can drive two servo motors at the same time, saving installation space and wiring. It is equipped with full closed-loop control as standard, which can drive rotary servo motor and linear servo motor. Mitsubishi mr-j4 series   MR-J4-A (general interface)    it has standard pulse sequence command interface and analog voltage input command interface    it can switch between various control modes such as position, speed and torque control   the standard supports command pulse frequency 4mpps   MR-J4-B(sscnet III / h interface)    the communication speed is 150Mbps and the communication cycle is 0.22ms    distance from wiring can be realized (maximum total extension distance 6400m: maximum 100m * 64 axis between stations)    because the optical fiber cable used is the same as the traditional sscnet III / h, it can be easily interchanged.   Mitsubishi servo amplifier mr-j4 series    mr-j4w3-b / mr-jw2-b (sscnet III / h interface, multi axis integrated servo amplifier)    it not only inherits the high performance, multi-function and convenience of mr-j4-b, but also drives two or three servo motors through one servo amplifier.    compared with mr-j4-b, mr-j4w2-b saves 25% - 30% installation space, and mr-j4w3-b saves about 30% installation space.   driver for motion control network sscnet Ⅲ / h. It can drive two servo motors at the same time, saving installation space and wiring. It is equipped with full closed-loop control as standard, which can drive rotary servo motor and linear servo motor.

Minimum Order: 1 bags

Fr-e740-1.5k-cht is an economical and high-performance type, 3-phase 400V power supply, and the motor capacity is * large and suitable for three standard 4- pole motors! Detailed parameters of fr-e740-1.5k-cht: 1. Power of fr-e740-1.5k-cht: 1.5kw 2. Current of fr-e740-1.5k-cht: 4A 3. Voltage of fr-e740-1.5k-cht: 3-phase 380 ~ 480v 4. Frequency of fr-e740-1.5k-cht: 50Hz / 60Hz 5. Allowable fluctuation range of voltage and frequency of fr-e740-1.5k-cht: 325 ~ 528v50hz / 60Hz (plus or minus 5%) 6. Power capacity of fr-e740-1.5k-cht: 4.5KVA 7. Overload capacity of fr-e740-1.5k-cht: 150% 60s, 200% 3S (inverse time characteristic) 8. Installation dimension of fr-e740-1.5k-cht: 140mm * 150mm * 135mm 9. Approximate weight of fr-e740-1.5k-cht: 1.9kg 10. Cooling mode of fr-e740-1.5k-cht: forced air cooling Selection method of fr-e740-1.5k-cht: 1. Fr-e740-1.5k-cht is selected according to the following load torque characteristics and is divided into the following three categories: (1) Constant torque load (2) Constant power load (3) Fluid load 2. Fr-e740-1.5k-cht is selected according to the control mode and is divided into the following five categories: (1) V / F open loop control (2) V / F closed loop control (3) Vector control without speed sensor (4) Vector control with speed sensor (5) Direct torque control Fr-e740-1.5k-cht selects the protective structure according to the use and installation environment: The protective structure of fr-e740-1.5k-cht should adapt to its installation environment, which requires consideration of environmental temperature, humidity, dust, pH, corrosive gas and other factors, which is of great significance to the long-term, stable, safe and reliable operation of fr-e740- 1.5k-cht. It is divided into the following four categories: (1) Open type (2) Closed type (3) Sealed type (4) Closed type 1. Select the frequency converter according to the load characteristics, If the load is constant torque load, Siemens MMV / MDV frequency converter shall be selected. If the load is fan and pump load, Siemens eco frequency converter shall be selected. 2. When selecting the frequency converter, the actual motor current value shall be used as the basis for the selection of the frequency converter, and the rated power of the motor can only be used as a reference. In addition, it should be fully considered that the output of the frequency converter contains high-order harmonics, which will deteriorate the power factor and efficiency of the motor. Therefore, the current of the motor increases by 10% and the temperature rise increases by about 20% compared with the power frequency power grid. Therefore, when selecting motor and frequency converter, this situation should be taken into account and appropriate allowance should be reserved to prevent excessive temperature rise from affecting the service life of motor. 3. If the frequency converter wants to run with a long cable, measures should be taken to restrain the influence of the long cable on the ground coupling capacitance to avoid insufficient output of the frequency converter. The frequency converter shall be selected by amplifying the first gear, or the output reactor shall be installed at the output end of the frequency converter. Shanghai Mitsubishi fr-e740-1.5k-cht 4. When the frequency converter is used to control several motors in parallel, the length of the motor cable and the allowable range of the frequency converter must be considered. If the specified value is exceeded, the frequency converter shall be selected by amplifying the first gear or the second gear. In addition, in this case, the control mode of the frequency converter can only be Vif control mode, and the frequency converter cannot protect the overcurrent and overload protection of the motor. At this time, it is necessary to add a fuse on each motor to realize the protection.

Minimum Order: 1 bags

Fr-d700 series Mitsubishi variable frequency governor compact multifunctional frequency converter 1. Power range: 0.47.5kw 2. General flux vector control, 150% torque output at 1Hz 3. Adopt long-life components 4. Built in Modbus RTU protocol 5. Built in brake transistor 6. Expand PID and triangular wave functions 7. Safety belt stop function FR-D720-0.4K, FR-D720-0.75K , , FR-D720-1.5K, FR-D720-2.2K, FR-D720-3.7K, FR-D720-5.5K, FR-D720 , -7.5K

Minimum Order: 1 bags

Function of braking resistance: 1 Protect the frequency converter; 2. Protect the power network. Braking resistance is a kind of ripple resistance, which is mainly used in the mechanical system of frequency converter controlling the rapid shutdown of motor. The firecracker motor converts the regenerative electric energy generated by the rapid shutdown into heat energy. The principle of resistance braking is that the rotor has current flow, which generates torque opposite to the rotation direction in the magnetic field of the stator, consumes the kinetic energy of the train, and achieves the purpose of braking. When the motor or other inductive load driven by the frequency converter stops, it is generally realized by energy consumption braking, that is, the kinetic energy of the motor and the magnetic energy in the coil are consumed through another energy consuming element after stopping, so as to realize rapid shutdown. Compent: Ceramic tube: it is the skeleton of alloy resistance wire and has the effect of radiator at the same time Alloy resistance wire: the flat belt has a wavy shape and is wound on the surface of the ceramic tube, which is responsible for converting the regenerated electric energy of the motor into heat energy The coating is flame-retardant on the surface of the alloy and has the characteristics of high temperature resistance Main hazards During the rapid shutdown of the motor, a large amount of regenerative electric energy will be generated due to inertia. If this part of regenerative electric energy is not consumed in time, it will directly act on the DC circuit part of the frequency converter. If it is light, the frequency converter will report fault, and if it is serious, the frequency converter will be damaged; The emergence of braking resistance solves this problem and protects the frequency converter from the harm of motor regenerative electric energy; Smooth operation The braking resistance directly converts the regenerative electric energy in the process of rapid braking of the motor into heat energy, so that the regenerative electric energy will not be fed back to the power network and will not cause grid voltage fluctuation, which plays a role in ensuring the smooth operation of the power network

Minimum Order: 1 bags

Condition: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. Terms: We ships worldwide and accepts T/T and Paypal. All items are subject to availability and passing our QA testing and inspection. Turnaround Time: Standard order processing is 1-2 business days plus shipping method chosen. Rush and off-hours service available for an additional fee. Packaging and Handling: Items are safely packaged in custom shipping cartons for protection. Shipping: We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded. Call to use a shipping service other than the ones listed. International Customers are responsible for all Customs fees, VAT and other fees applied by their respective countries. All shipments are fully insured.

Minimum Order: 1 bags

Common faults of ABB Robot Teaching Pendant: 1: ABB Robot S4 and irc5 teaching devices have poor touch or local failure (replace the touch panel) 2: ABB Robot S4 and irc5 teaching pendant have no display (repair or replace internal mainboard or LCD) 3: Poor display of ABB Robot S4 and irc5 teaching pendant, vertical line, vertical belt, flower screen, broken, etc. (replace LCD screen) 4: The keys of ABB Robot S4 and irc5 teaching pendant are poor or ineffective (replace the key panel) 5: Whether the teaching pendant of ABB Robot S4 and irc5 has display backlight (replace the high-voltage board) 6: The XYZ axis of the control lever of ABB Robot S4 and irc5 teaching pendant is poor or ineffective (replace the control lever) 7: The emergency stop button of ABB Robot S4 and irc5 teaching pendant is invalid or ineffective (replace the emergency stop button) 8: The data lines of ABB Robot S4 and irc5 teaching pendant cannot communicate or be powered on, and there are broken lines inside (replace the data line) ABB Robot parts and spare parts: ABB teaching box 3hne00313-1 m1998 M2000 teaching pendant ABB Robot Teaching box 3hac023195-001 ABB Robot irc5 teaching pendant dsqc679 3hac028357-001 ABB teaching pendant 3hab5386-1 ABB teaching pendant cable 3hac031683-001 ABB teaching pendant lever jc2000-0049 t (SPL) - xyz-popop-25-spl-spl-n ABB drive 3hab8101-13 / 07B ABB teaching box LCD 3hnp04014-1 I / O signal input and output board 3hac025784-001 dsqc651 I / O signal input / output board dsqc652 3hac025917-001 ABB Robot IO board 3hea800439-002 ABB interface board dsqc327a 3hac17971-1 ABB I / O mainboard dsqc 328a 3hac17970-1 ABB Robot I / O interface board dsqc327 3hab7230-1 ABB IRB 6400 main computer board dsqc 540 3hac14279-1 ABB industrial robot teaching board 3hne00313-1 main board 3hne30055 ABB Robot control board dsqc611 3hac13389-2 DSQC643 3HAC024488-001 ABB M2004 IRC5 ABB Robot base plate 3hac14363-1 / 00 dsqc541 ABB irb6400 computer board 3hac02347-001 / 01 dsqc532b I / O computer AB

Minimum Order: 1 bags

Specification of Mitsubishi q series output module qy42p: [output type] transistor drain output module [output points] 64 points [isolation method] Optocoupler [rated load voltage] 12-24vdc (+ 20 / - 15%) [maximum load current] 0.1a/point, 1.6a/common terminal [maximum starting current] 0.7A, 10ms or less [leakage current at off] 0.1mA or less [maximum voltage drop at on] 0.1vdc (standard) 0.1A, 0.2vdc (maximum) 0.1A [on - > off response time] 1ms or less [off - > on response time] 1ms or less (rated load, resistive load) Zener diode [fuse] none [external power supply voltage] 12-24vdc (+ 20 / - 15%) (ripple coefficient within 5%) [external power supply current] 20mA (at 24VDC) / common terminal [dielectric withstand voltage] 560vacms / 3 cycles (altitude 2000m (6557.38 feet)) [insulation resistance] 10m Ω or higher measured by insulation resistance tester [immunity] through 1500vp-p noise voltage, 1 μ Voice simulator with s voice width and 25 to 60Hz voice frequency First instantaneous voice iec61000-4-4: 1kV [protection grade] IP2X [common terminal arrangement] 32 points / common end (common end: 1a01, 1a01, 2a01, 2A02) [I / O points] 64 (set the I / O allocation according to the 64 point output module.) [overheat / short-circuit protection function is activated in [with] increment [running indicator] on indication (LED) [external connection] 40 pin connector * 2 rows [applicable wire diameter] cable core: 0.3mm2 (for a6con1) [external wiring connector] a6con1, a6con2, a6con3 (optional) [connector / terminal converter] a6tbxy36, a6tbxy54 [5VDC internal current consumption] 105ma (standard: all points on) [overall dimension h * w * D] 98 * 27.4 * 90mm [weight] 0.17kg

Minimum Order: 1 bags

Qx80h is Mitsubishi q series DC high-speed input module, negative common terminal type, 16 points. Qx80h price (face price), the market stock is very small. Qx80h Parameter Description: 24VDC / 4mA, common cathode, 16 points, terminal block (high speed). Specification details of Mitsubishi PLC module qx80h: [input form] DC input module (negative common end) [input points] 16 points [isolation method] Optocoupler [rated input voltage] DC24V (+ 20% - 15%, ripple coefficient above 5%) [rated input current] about 6mA [derating chart] [on voltage / on current] 13V or higher / 3mA or higher [off voltage / off current] 8V or less / 1.6mA or less [input impedance] about 3.9k Ω [function setting SW2] off interrupt, on high speed input [dielectric withstand voltage] 560vac MS / 3 cycles (altitude 2000m (6557.38 feet)) [insulation resistance] 10m Ω or higher measured by insulation resistance tester [immunity] through 1500vp-p noise voltage, 1 μ Voice simulator with s voice width and 25 to 60Hz voice frequency First instantaneous voice iec61000-4-4: 1kV [protection grade] IP2X [common terminal arrangement] 8 points / common terminal (common terminal: tb9, tb18) [I / O points] 16 (I / O allocation is set to 16 point high-speed input module or interrupt module.) [working status indicator] set by setting in GX developer switch [running indicator] on indication (LED) [external connection] 18 point terminal block (M3 * 6 screw) [applicable wire diameter] core 0.3mm2 to 0.75mm2 (maximum outer diameter 2.8mm) [applicable to clamping terminal] R1 25 ~ 3 (clamping terminal with sleeve cannot be used) [5VDC internal current consumption] 80mA (standard: all points on) [overall dimension (h * w * d)] 98 * 27.4 * 90 [mm] [weight] 0.16kg

Minimum Order: 1 bags

4-axis, differential driver output type. Control unit: pulse. Number of positioning data: 10 data / axis. Maximum pulse output: 4mpps. 40 pin connector. Differential output. Ideal solution for simple multi axis positioning. Perfect match with stepper motor control gi71e71-100 reference manual. The acceleration and deceleration are smooth and the speed changes slightly. The speed of starting processing of positioning control is accelerated. Locate the module. Open collector output type qi71e71-100 differential driver output type It can be divided into two types: open circuit collector output type and differential driver output type The output positioning module of the differential driver can reliably transmit the high-speed command pulse (up to 4mpps) to the servo amplifier, and the transmission distance can reach 10m to realize high-speed and high-precision control. (the maximum command pulse of open collector positioning module is 200kpps.) Reduce system downtime and recovery time. With a simple operation, you can back up all the data in the CPU to the memory card gi71e71-100 reference manual. Through regular backup, the latest parameters and programs can be saved to the memory card all the time. In case of CPU failure, after replacing the CPU, the system can be restored through simple operation and through the memory card with data backed up in advance. As a result, there is no need to spend time managing backup data, and the recovery time can be reduced when the system is down. Input and output points: 4096 points. Number of input and output components: 8192 points. Program capacity: 200K steps. Processing speed: 0.0095 us. Program memory capacity: 800KB. Support USB and network. Support the installation of memory card. High speed communication between multiple CPUs The fixed scanning interruption time is shortened and the device is high- precision. The minimum interval of fixed cycle interrupt program is reduced to 100US. It can accurately obtain high-speed signal, and realize high-speed control qj71e71-100 for parallel processing of device communication (cycle is 0.88ms). The high-speed communication cycle between multiple CPUs is synchronized with the motion control, so the operation efficiency can be maximized. In addition, the performance of the latest motion control CPU is twice that of the previous model Ensure high-speed and high-precision machine control. Slot 1: no power supply is required: install the large ans series PC module with a thousand. The base plate of ANS series PLC. Qa1s series PLC 1 slot main base plate. Ans series modules can be installed. rs-232 1ch。 rs-422/485 1ch。 Through qi71c24n (- 2) RS-232 serial communication, the programmable controller can be programmed and monitored with programming tools. Qi71c24n (- R2) has the function corresponding to the public telephone line modem. The modem used can be initialized, and the connection with the target equipment can be processed. The communication can be carried out through remote equipment and programming tools, modems and public telephone lines. Using the remote password function, The Q series programmable controller can be accessed illegally via the modem function of ai71c24n (- R2). Serial communication module that can collect / change data, monitor / manage, measure data collection, etc. of programmable controller. High speed and large capacity communication qj71e71-100 manual with maximum speed of 230.4kbps and maximum 9960 words (during MC protocol communication). The reading / writing qi71e71-100 Manual of the data in the programmable controller can be executed by using the MC protocol through external devices (PC, display, etc.). By selecting the non sequential protocol and using the sequential program for communication control, between the programmable controller and the external equipment (bar code reader, measuring equipment, etc.), Use the local protocol of the external device to communicate with it.

Minimum Order: 1 bags

Specification of Mitsubishi FL net interface moudel qj71fl71-t-f01: 1. Transmission instructions [data transfer speed] 100base-tx: 100Mbps (full duplex / half duplex) 10Base-T: 10Mbps (half duplex) [transmission mode] baseband [electronic interface] IEEE802 3 standard (CSMA / CD standard) [Transport Protocol] UDP / IP FA link protocol [maximum section length] 100m [maximum number of stations in the system] 254 [maximum number of sites] 254 modules / all internal address blocks [minimum station spacing] 2.5m [cyclic data amount] maximum (8K bits + 8K words) / system, maximum (8K bits + 8K words) / station [information data capacity] 1024 bytes maximum 2. Link data description [public storage area] area 1 (bit area) 8K / bit area 2 (word area) 8K words [virtual address space and physical memory] none [error record storage area] 512 words [status storage area] bit area 2K / bit word area 2K [local station network parameter setting area] 96 words [network parameter setting area of other stations] 2048 words [network parameter acquisition area] 512 words [soft component storage area] 512 words [information area (instantaneous area)] 1024 bytes * 2 at most (transmit receive each) 3. Transmission instructions [information transmission] 500ms or less (1:1 one-way information arrival time) [token start time] Newly added: start time = 3000 + (minimum number of sites / remaining 8) * 4 + 1200ms Joining: joining time = refresh cycle * 3 + number of local stations * 4ms 4. Other specifications [input / output points] 32 points (I / O allocation: smart) [5VDC internal current consumption] 0.50a [noise resistance, voltage resistance, insulation resistance] according to the power instructions for installing the fl net site [external dimension h * w * D] 98 * 27.4 * 90mm [weight] 0.11kg

Minimum Order: 1 bags

Adapter for mounting DIN rail. For q38b-e.q312b-e, q612b, q38rb, q68rb, q65wrb, q38db, q312db. 4-axis, sscnet sub connected q26udvcpu parameter specification. 2-axis / 3-axis / 4-axis linear interpolation. 2-axis arc interpolation. Control unit: mm, inch, degree, pulse. Number of positioning data: 600 data / axis. 40 pin connector. Wiring is saved through sscnet sub cable connection, and the distance between stations can reach 50mq26udvcpu The q26udvcpu parameter specification of the position system that supports the determination of the origin position through the origin return data setting operation. In addition, the upper limit switch, lower limit switch and near point stop signal input can be directly connected to the servo amplifier, which greatly reduces the wiring demand. Easily realize high-speed positioning control. Support multiple types of positioning control, Including q26udvcpu parameter specifications such as 2-4-axis linear interpolation, 2-axis circular interpolation, speed control, speed / position switching control, path control, constant speed control, etc. In addition, software such as "GX configurator QP" can be used, It is convenient for positioning, setting, monitoring and debugging. RS-232 2ch。 The programmable controller can be programmed and monitored through the RS-232 serial communication programming tool of qj71c24n (- R2). Qj71c24n (- R2) has the function corresponding to the public telephone line modem. It can initialize the modem used and connect with the object device. Q26udvcpu (communication with built-in Ethernet port) communicates through remote equipment, programming tools, modems and public telephone lines. Using the remote password function, Access to the Q series PLC via the modem function of qj71c24n (- R2) can be blocked. Serial communication module q26udvcpu that can collect / change the data of programmable controller, monitor / manage the collection of measurement data, etc. (internal Ethernet port communication chapter). It can realize high-speed and high-capacity communication with high speed of 230.4kbps and large 960 words (in MC protocol communication). The MC protocol can be used to read / write data in the programmable controller through external devices (PC, display, etc.). By selecting the non sequential protocol and using the sequential program for communication control, between the programmable controller and the external equipment (bar code reader, measuring equipment, etc.), Use the local protocol of the external device to communicate with it q26udvcpu (Communication Chapter of built-in Ethernet port). Capacity: 8m bytes. Support SD memory card. High speed universal qcpu supports SD memory card, Thus, data exchange can be easily realized with PC with SD memory card socket. In addition, SD memory card and extended SRAM card can be used at the same time. Therefore, the extended SRAM card can be used to expand the file memory. The SD memory card can be used to record data files, save a large amount of annotation data, and guide the operation through the memory card at the same time. Better user experience data recording function. Easy to record without procedures. The collected data can be saved to the SD memory card in CSV format by simply completing the setting through the special configuration tool wizard, It can effectively use the saved CSV file to easily create various reference materials, Including daily report, generated report and general report q26udvcpu user manual. These data can be used for data analysis and traceability at startup, Just insert the SD memory card, and the q26udvcpu parameters and specifications can be recorded automatically. Just insert the SD memory card that saves the record setting file into the CPU to start recording automatically. Even when remote data collection is required, After receiving the record setting file by mail and storing it in the SD memory card, you can start recording immediately.

Minimum Order: 1 bags

Note: In order to prevent electric shock, the motor and frequency converter must be grounded before use. • Do not install the incoming capacitor or surge suppressor, radio noise filter to the output of the frequency converter. This will lead to the failure of the frequency converter or the damage of the capacitor and surge suppressor. If any of the above equipment has been installed, please remove it immediately. When it is necessary to set a non fuse circuit breaker at the output end, please consult the manufacturer for the selection of non fuse circuit breaker. • With regard to electromagnetic wave interference, the input / output (main circuit) of the frequency converter contains high-frequency components, which may interfere with the communication equipment near the frequency converter (such as AM radio). Therefore, EMC filters are installed to minimize interference. • For details of peripheral devices, please refer to the user manual of each option and peripheral device. • PM motor cannot operate on power frequency power supply. • Because PM motor is a motor with built-in permanent magnet, even when the power supply of frequency converter is disconnected, as long as the motor is still rotating, high voltage will be generated at the motor terminal. When the output switch is closed, turn on the power supply of the frequency converter and use it when the motor is stopped.

Minimum Order: 1 bags