Steel Wire Mesh

Plain Weave Wire Mesh Tengde One of the most common preparation methods in industrial production and civil life has been widely used, The main characteristic is the same density of the warp and zonal wire diameters Stainless steel wire mesh factory-Tengde is a professional wire mesh supplier, stainless steel wire mesh, filter series are our main products, and can produce various special-shaped meshes according to requirements. Company advantage: large inventory, can be delivered at any time, support special specifications special customization Specification parameter 1.Raw material: SUS/AISI 201 202 302 304 310 310S 316 316L 321 430 etc. 2.Wire diameter: 0.015-1.8mm 3.Weaving count: 1mesh -635mesh 4.Weaving width: 190mm, 915mm, 1000mm, 1245mm to 1550mm （can made-custom it ） 5.Weaving length: usually, manufactured in 30m ( up to 200m) long 6.Stainless Steel Wire Mesh Product Features: Heat, acid, corrosion resistance, wear resistance. Surface smooth, clean, non- toxic, health, environmental protection. 7.Min order: 1roll, max order: no limit 8.Stainless steel wire mesh products Net surface: clean, smooth, small magnetic 9.Packaging Details A: paper tube inside, then water-proof film and plastic film outside B: wooden box or pallet final. C: per roll packs with craft paper + wooden box D: special package on request. 10.Specification of plain / twill weave stainless steel wire mesh WIRE DIASMETER APERTURE/ OPENING OPEN AREA MESH INCH MM INCH MM % 1X1 0.08 2.03 0.92 23.37 84.6 2X2 0.063 1.6 0.437 11.1 76.4 3X3 0.54 1.37 0.279 7.09 70.1 4X4 0.63 1.6 0.187 4.75 56 5X5 0.47 1.19 0.203 5.16 65.9 6X6 0.41 1.04 0.159 4.04 63.2 8X8 0.028 0.71 0.097 2.46 60.2 10X10 0.025 0.64 0.075 1.91 56.3 12X12 0.023 0.584 0.06 1.52 51.8 12X12 0.02 0.508 0.063 1.6 57.2 14X14 0.023 0.584 0.048 1.22 45.2 14X14 0.02 0.508 0.051 1.3 51 16X16 0.018 0.457 0.0445 1.13 50.7 18X18 0.017 0.423 0.0386 0.98 48.3 20X20 0.02 0.508 0.03 0.76 36 20X20 0.016 0.406 0.034 0.86 46.2 24X24 0.014 0.356 0.277 0.86 46.2 30X30 0.013 0.33 0.0203 0.52 37.1 30X30 0.012 0.305 0.0213 0.54 40.8 30X30 0.012 0.305 0.0213 0.54 40.8 30X30 0.009 0.229 0.243 0.62 53.1 35X35 0.011 0.279 0.0176 0.45 37.9 40X40 0.01 0.254 0.015 0.38 36 50X50 0.009 0.229 0.011 0.28 30.3 50X50 0.008 0.203 0.012 0.31 36 60X60 0.0075 0.191 0.0092 0.23 30.5 60X60 0.007 0.178 0.0097 0.25 33.9 70X70 0.0065 0.165 0.0078 0.2 29.8 80X80 0.0065 0.165 0.006 0.15 23 80X80 0.0055 0.14 0.007 0.18 31.4 90X90 0.005 0.127 0.0061 0.16 30.1 100X100 0.0045 0.114 0.0055 0.14 30.3 100X100 0.004 0.102 0.006 0.15 36 100X100 0.0035 0.089 0.0065 0.17 42.3 110X110 0.004 0.1016 0.0051 0.1295 30.7 120X120 0.0037 0.094 0.0064 0.1168 30.7 150X150 0.0026 0.066 0.0041 0.1041 37.4 160X160 0.0025 0.0635 0.0038 0.0965 36.4 180X180 0.0023 0.0584 0.0033 0.838 34.7 200X200 0.0021 0.0533 0.0029 0.0737 33.6 250X250 0.0016 0.0406 0.0024 0.061 36 270X270 0.0016 0.0406 0.0021 0.0533 32.2 300X300 0.0051 0.0381 0.0018 0.0457 29.7 325X325 0.0014 0.0356 0.0017 0.0432 30 400X400 0.001 0.0254 0.0015 0.37 36 500X500 0.001 0.0254 0.001 0.0254 25 635X635 0.0008 0.0203 0.0008 0.0203 25

Minimum Order: 1 bags

TIANHUI Crimped wire mesh is constructed of wires that have been crimped prior to weaving them together in a loom. Crimping the wires before weaving provides stability and consistency in larger spaced wire mesh. Various crimping styles have been developed over the years to improve manufacturing coefficients, function, and aesthetics. The most common materials used to create Crimped wire mesh are 65Mn steel wire, galvanized steel, stainless steel, aluminum, Brass and Copper... Crimped Wire Mesh Features: Solid construction Extremely versatile East to install Can have low resistance to wind loads Easily cut to fit Available in many materials, such as stainless steel and aluminum Stainless steel crimped wire mesh is especially useful because it is extremely chemical resistant, works with hot or cold liquids, and is easily cleaned. Aluminum mesh is lightweight, strong, has a high electrical conductivity, and a low melting point. Aluminum mesh also significantly resists atmospheric corrosion. Carbon steel and galvanized wire mesh are strong, economical, and readily available. Other exotic materials such as copper and nickel can also be woven into wire mesh.

Dutch Weave Wire Mesh Description Dutch Weave Wire Mesh is also called Hollander Weave Wire Mesh, It is usually made of mild steel wire and stainless steel wire. We can also produce dutch wire mesh using special alloys and other available materials to your specifications.  TIANHUI Dutch weave wire mesh has different diameter in the weft and warp directions. Commonly the warp wire is coarser wire, which can supply the high tensile strength for the wire mesh. The weft wire is finer wire, which can ensure the excellent filtering performance. This unique structure with greater strength and finer openings is primarily used as a filter cloth. Dutch Weave mesh/ Hollander Weave mesh Feature: – Material quality 201, 304, 316, 316L,904L grade stainless steel and mild steel wire. – Standard width 1m, 1.22m and 1.52m... – Available in Plain Dutch Weave and Twilled Dutch Weave – Nominal Filtration Rating from 5 – 200 Micron – Available in roll form or cut to size or as discs

TIANHUI Stainless steel wire mesh is also called stainless steel wire cloth, Stainless steel woven wire mesh, Stainless steel filter mesh,  used in a wide variety of industries since it is one of the most common materials for woven wire mesh products besides mild steel and galvanized steel with different properties.  Stainless Steel Wire Mesh is used in industries such as: With its the excellent resistance against acid, alkali, heat and corrosion, find extensive uses in processing of oils, chemicals, food, pharmaceuticals, also sorting and screening of solid, liquid and gas in mine, metallurgy, airspace, machine making, etc. Stainless Steel Wire Mesh Parameters Material: SS 201, 202, 304, 316, 316L, 321, 430, 310S, 2205, 2207,904L etc. Mesh count: 2mesh,10mesh ,20mesh, 40mesh, 60mesh, 80mesh, 100mesh 200mesh 300mesh, 400mesh etc Plain weave: 0.5X0.5mesh to 635X635 mesh; Twill weave: 20x20mesh to 400x400mesh; Plain dutch weave: 10X64mesh to 80X700mesh; Reversed dutch weave: 48x10mesh to 720x150mesh. Roll width 1m,1.22m,1.3m,1.6m,2m,3m,customization available Roll length 30m, 60m, customization available