Telecommunications & Networks

New product with WIFI6E—DR6018 Qualcomm-Atheros IPQ6010 Qualcomm-Atheros IPQ6010 The Qualcomm-Atheros IPQ6010 is the ultimate solution for high-performance wireless networking applications. With its advanced technology and powerful capabilities, the IPQ6010 delivers lightning-fast speeds, exceptional range, and unparalleled reliability. Featuring a quad-core 64-bit ARM Cortex A53 CPU, the IPQ6010 delivers industry- leading performance and power efficiency, making it ideal for a wide range of applications, from high-speed internet access and video streaming to industrial automation and IoT devices. With support for both 2.4GHz and 5GHz bands, the IPQ6010 provides exceptional coverage and throughput, ensuring that your wireless network stays connected and delivers the bandwidth you need. Thanks to its advanced security features, including WPA3 and AES encryption, the IPQ6010 provides robust protection against unauthorized access and data breaches, giving you the peace of mind you need to focus on your business. Designed with flexibility and ease of use in mind, the IPQ6010 is compatible with a wide range of networking protocols, including 802.11a/b/g/n/ac/ax, 802.3af/at/bt, and more, making it easy to integrate into your existing infrastructure. Quad-core ARM 64bit A53 @1.8GHz Processor 1GB DDRL3L System Memory 32MB NOR Flash, 256MB NAND Flash Supports Dynamic Frequency Selection (DFS) 2x2 On-board 2.4GHz radio, up to 573Mbps physical Data Rate 2x2 On-board 5GHz radio, up to 1201Mbps physical Data Rate Support: QUECTEL RM500Q-GL Support: QCN9074 WiFi 6E Card Symbol Parameter CPU Qualcomm-Atheros IPQ6010 CPU Frequency Quad-core ARM 64 bit A53 @1.8 GHz processor System Memory 1GB (2x 512MB) DDR3L 16-bit interface with 32-bit memory bus design Ethernet Port 1 x 1Gbps Ethernet Ports & POE3 x 1Gbps Ethernet Ports , 1x 2.5Gbps Ethernet Port NGFF Slot M.2 (NGFF) “E Key” Socket with MiniPCIe 3.0 SD Card Slot 1x SD Card Slot USB /header 1x USB 2.0 Port POE 24V~48V passive POE/Active POE(Suport 802.3bt) DC Jack 24V power supply LED header FFC/FPC Connector Serial Port 1x Serial Port 4 Pin Connector Wireless On-board 2x2 2.4GHz MU- MIMO OFDMA 802.11b , /802.11g/802.11n/802.11ax, max 23dBm per chain On-board 2x2 5GHz MU-MIMO OFDMA

PRODUCT DESCRIPTION Long Range UGV EOD Robots Video Transmitter HDMI CVBS Low Latency AES256 Encryption 200-2700MHz Introduction The LKAV-C320 is a long range wireless video transmitter supports HD digital (HDMI) and SD analog (CVBS) dual video inputs, based on COFDM and H.264 technologies, it is ideally suits for UGV (Unmanned Ground Vehicle) / EOD Robots video transmission. It can establish solid video link in all environments such as urban city, tunnel and battlefield. Application Scenario Long Range UGV EOD Robots Video Transmitter HDMI CVBS Low Latency AES256 Encryption 200-2700MHz 0 Long Range UGV EOD Robots Video Transmitter HDMI CVBS Low Latency AES256 Encryption 200-2700MHz 1 Features ■ Advanced COFDM modulation ■​ High efficient H.264 compression ■​ Range up to 1-1.5km NLOS ■​ 60-100ms low latency ■​ Support HDMI and CVBS dual video inputs ■​ Compact size and light weight ■​ Rugged aluminum alloy housing ■​ High safety AES256 encryption Specification Transmission Characteristics Modulation COFDM Modulation Type QPSK (4QAM), 16QAM, 64QAM (Default QPSK) Frequency 300MHz-860MHz (Default 700MHz) 860MHz-2.7GHz for customization Transmit Power 30dBm/33dBm RF Bandwidth 2/4/6/8MHz adjustable FEC 1/2, 2/3, 3/4, 7/8 Guard Interval 1/4, 1/8, 1/16, 1/32 Data Characteristics Video Input HDMI (Mini): 1080p/1080i/720p/720i AV: 720x480/60i (NTSC), 720x576/50i (PAL) Video Compression H.264 RF Interface N F head Parameter Settings LED control box Encryption AES256 (support set password) Link Latency ≤80ms Movement Speed Supports ≥120km/h Electrical Characteristics Working Voltage DC12V Working Current ≤1.6A (@12V) Power Consumption ≤20W Physical Characteristics Weight ≤0.9kg (w/o antenna) Dimensions 150*120*45(mm)(L×W×H) Working Temp. -10℃~70℃ Front Panel Long Range UGV EOD Robots Video Transmitter HDMI CVBS Low Latency AES256 Encryption 200-2700MHz 2 ① Power input (12V DC) ② HDMI input (Mini) ③ Audio left channel input ④ Audio right channel input ⑤ Composite video input (CVBS) ⑥ Power push button ⑦ Antenna interface (N F head) Rear Panel Long Range UGV EOD Robots Video Transmitter HDMI CVBS Low Latency AES256 Encryption 200-2700MHz 3 ① Data interface (DB9 for parameter settings)

Product Description Pallet PLC Splitter, 19" Rack Mount 1x64 SC / UPC, Used for FTTH Pallet type fiber optic PLC splitter has no open wire, the fiber optic cable is in a metal box with many high quality optical fiber adapters. According to the quantity of the adapters it mounted, It will be fixed to the fiber optic splice outdoor cabinet or optical distribution frame. The tray type PLC splitter can be inserted into the fiber optic tray directly. It is suitable for various types of optical fiber splitter, wave demultiplexer and other integrated installation and use. FOC COMMUNICATION CO., LTD provides a various of 1xN and 2xN PLC 1U rack mount type splitters, including 1x2, 1x4, 1x8, 1x16,1x32,1x64 1U rack mount type PLC splitter and 2x2, 2x4, 2x8, 2x16, 2x32, 2x64 1U rack mount type PLC splitters. Features Configuration Pallet Type 1x64 Fiber Type Single Mode G.657A1 Connector Type SC/APC Low Insertion loss Low PDL High Return Loss Uniform Power Splitting Compact Design Wide Operating Wavelength Wide Operating Temperature Excellent Environmental & Mechanical Stability Qualified Under Telcordia GR-1221 and GR-1209 Applications Telecommunications , Local area network Fiber to the home Video transmission Fiber optic sensing Testing instruments CATV Optical Specifications Parameter Unit Specification (P Grade) Channel Number 1X2 1X4 1X8 1X16 < , br>1X32 1X64 Operation Wavelength nm 1260～1650 Ins , ertion Loss (Max.) dB 4.3 7.4 10.7 , 13.9 17.2 21.5 Unifor , mity (Max.) dB 0.5 0.8 1.0< , br> 1.4 1.6 2.0 Polarizati , on Dependent Loss dB 0.2 0.3 0.3 0.3 0.3 0.5 Return Loss dB ≥50 Directivity , dB ≥50 Operating Temperature ℃ -40～+85 Sto , rage Temperature ℃ -40～+85 Parameter Unit Specification (P Grade) Channel Number 2X2 2X4 2X8 2X16 < , br>2X32 2X64 Operation Wavelength nm 1260～1650 Ins , ertion Loss (Max.) dB 4.3 7.6 11.0 , 14.8 17.9 21.5 Unifor , mity (Max.) dB 0.8 1.0 1.2< , br> 1.5 1.8 2.0 Polarizati , on Dependent Loss dB 0.2 0.3 0.3 0.3 0.3 0.5 Return Loss dB ≥50 Directivity , dB ≥50 Operating Temperature ℃ -40～+85 Sto , rage Temperature ℃ -40～+85 Not , e: All the data above does not include connectors. Ordering Information PLC Port Fiber Type Input Output Pigtail Length Connector PLC 0102=1x2 0104=1x4 0108=1x8 0116=1x16 0132=1x32 0164=1x64 0204=2x4 0208=2x8 0216=2x16 0232=2x32 0264=2x64< , br> 1=G652D, 2=G657A L=900µm Loose tube, S=2.0mm, R=3.0mm, 0=Adapter L=900µm Loose tube, S=2.0mm, R=3.0mm, 0=Adapter 05-20=0.5--2.0m, 0=Adapter, X=Others FU=FC/UPC, FA=FC/APC, SU=SC/UPC, SA=SC/APC, ST=ST/UPC, LU=LC/UPC, LA=LC/APC, 00=None, X=Others FTTH Pallet Fiber PLC Splitter 1650nm 19" Rack Mount 1x64 SC UPC 0 We can produce many serials of PLC splitters including: 1X2, 1X4, 1X8, 1X16, 1X32, 1X64, 2X4, 2X8, 2X16, 2X32, 2X64 with following package Bare fiber series Mini loose tube package ABS Module type LGX box type Rack Mount patch panel for PON application. Wall Mount patch panel for PON application Inline fiber optic splice closure type Erect fiber optic splice closure type

MPO (Multi-Fiber Push-on) is the first generation of clip clamping multi-core optical fiber connector. MTP/MPO cables are composed of MTP/MPO connectors and optical fibers. MTP/MPO connectors have a female type (without pins) or a male one (with pins). And a white dot is for identifying fiber position in connectors. MTP/MPO connectors largely increase the cable density and save circuit card and rack space, which are well suited for current 40G/100G cabling and future network speed upgrades.

1U Rack Mount Enclosure Drawer Type 12 Core 6 Port Fiber Optic Patch Panel Description: Rack Mount type fiber optic enclosure patch panel is an integrated unit for fiber distribution, these equipment function is to fix and manage the fiber optic cables inside the box as well as provide protection. There different models to fit for 12core 24core 48core 96core 144core 288core fiber applications. They can be with different adapter interface including the SC, ST, FC, LC MTRJ, etc. related fiber accessories and pigtails are optional. Product details Suitable Adapters SC LC Material Cold Rolled Steel Plate Available Cable Outdoor or Indoor Cable Outlet 6 Port Installation way Rack Mount Dimensions 485mmx295mmx47mm(1U 19") Applications Rack Mountable Cabinet in Data Center Connector Capacity 6pcs SC/LC connectors Connector Type SC LC FC ST Location Cabinet Usually Location of Use Data Center Number of Trays 1 Splice Tray Product Type ODF/Fiber Patch Panel Splice Capacity 24 fibers Feature: 1. Made of cold-rolling steel, static spreading-plastic, small dimension and exquisite and easy for operation. 2. The box has a pothook, which is convenient to install and dismantle. 3. The splice tray could be piled one upon another, flexible to turn 4. Adjustable clamp seal ring and reinforce configuration, which could adjust different sizes of cables flexibly to make sure the cables are clamp tightly. 5. The indoor type is of excellent seal performance, which could prevent water from entering effectively. 6. The box is of unique structure, reasonable layout, and has adequate room for operation. Application: 1. Telecommunications subscriber loop 2. FTTH 3. LAN/WAN 4. CATV more models SIZE Drawer Type Fiber Patch Panel 1U 12/24 Port SIZE:485*295*47MM Drawer Type Fiber Patch Panel 2U 48/72 Port SIZE:485*250*90MM Drawer Type Fiber Patch Panel 3U 96 Port SIZE:485*310*120MM Drawer Type Fiber Patch Panel 4U 144 Port SIZE:485*295*180MM Details photos: 6 Port Fiber Optic Patch Panel SC 12 Core 1U Rack Mount Fiber Enclosure 06 Port Fiber Optic Patch Panel SC 12 Core 1U Rack Mount Fiber Enclosure 16 Port Fiber Optic Patch Panel SC 12 Core 1U Rack Mount Fiber Enclosure 2

Product Description Cat.5E U-UTP Outside Plant Cable Quick Detail: 100MHz transmission frequency 24AWG high-quality conductor Excellent physical performance 100m Channel test pass 90m Permanent Link test pass ISO/IEC 11801-2008 TIA/EIA-568B.2-2001 CE, RoHS, CPR, UL compliant 3 Year Warranty OEM or ODM available Description: The conductor adopts 24AWG high-quality oxygen-free copper wire (99.99%). Suitable for Fast Ethernet applications, the highest transmission frequency can reach 100MHz. The Cable can pass 100m Channel test or 90m Permanent Link test. Fully meet and superior to the standards of ISO/IEC 11801-2008 TIA/EIA-568B.2- 2001, in line with CPR UL. Accept customization of OEM or ODM Specifications: Test Standard TIA/EIA-568C.2,ISO_IEC 11801,YD/T 1019 Construction Conductor Material Solid Bare Copper RoHS 0.5mm Cat5E U UTP Outside Plant Cable Support OEM ODM 0 Diameter(mm) 0.50 Insulation Material HDPE Diameter(mm) 0.89~0.90 Core color 1 white-blue/blue 2 white-orange/orange 3 white-green/green 4 white-brown/brown Polyester tap 20×0.035mm Aluminum tape 22×0.25mm Sheath Material LLDPE Thickness 1.3±0.1mm Diameter 8.6±0.2mm Color Black Surface printing Letter high 3.0 ± 0.5mm Color White Print error & Space ≤± 0.5% , 1m Package Reel in box Box Dimensions(mm) 510*510*240 Package Length 305m Electrical Properties Conductor Resistance (20℃) ≤9.5 Ω/ 100m Electrical Resistance Unbalance ( 20℃) ≤2.5% Insulation Resistance >5000 MΩ·km Pair to Ground Capacitance Unbalance(0.8 KHz or 1KHz) ≤330pF/100m Mutual capacitance of a pair ≤5.6nF/100m Transmission Properties(Fluke Testing) Feq MHZ Zin IL RL NEXT PS NEXT ELFEXT PS ELFEXT Ω dB/100m dB dB/100m dB/100m dB/100m dB/100m 1.0 100±15 ≤2.04 ≥20.00 ≥65.30 ≥62.30 ≥64.00 ≥61.00 4.0 ≤4.05 ≥23.01 ≥56.27 ≥53.27 ≥51.96 ≥48.96 8.0 ≤5.77 ≥24.52 ≥51.75 ≥48.75 ≥45.94 ≥42.94 10.0 ≤6.47 ≥25.00 ≥50.30 ≥47.30 ≥44.00 ≥41.00 16.0 ≤8.25 ≥25.00 ≥47.24 ≥44.24 ≥39.92 ≥36.92 25.0 ≤10.42 ≥24.32 ≥44.33 ≥41.33 ≥36.04 ≥33.04 31.2 ≤11.71 ≥23.65 ≥42.89 ≥39.89 ≥34.12 ≥31.12 62.5 ≤16.99 ≥21.54 ≥38.36 ≥35.36 ≥28.08 ≥25.08 100 ≤21.98 ≥20.11 ≥35.30 ≥32.30 ≥24.00 ≥21.00 Test Standard TIA/EIA-568C.2,ISO_IEC 11801,YD/T 1019 Construction Conductor Material Solid Bare Copper RoHS 0.5mm Cat5E U UTP Outside Plant Cable Support OEM ODM 1 Diameter(mm) 0.50 Insulation Material HDPE Diameter(mm) 0.89~0.90 Core color 1 white-blue/blue 2 white-orange/orange 3 white-green/green 4 white-brown/brown Rip cord Tex111 Sheath Material PVC/LSZH Thickness 0.6±0.1mm Diameter 5.2±0.2mm Color According to the requires Surface printing Letter high 3.0 ± 0.5mm Color Black&White Print error & Space ≤± 0.5% , 1m Package Paper box Box Dimensions(mm) 360*360*230 Package Length 305m Electrical Properties Conductor Resistance (20℃) ≤9.5 Ω/ 100m Electrical Resistance Unbalance ( 20℃) ≤2.5% Insulation Resistance >5000 MΩ·km Pair to Ground Capacitance Unbalance(0.8 KHz or 1KHz) ≤330pF/100m Mutual capacitance of a pair ≤5.6nF/100m Transmission Properties(Fluke Testing) Feq MHZ Zin IL RL NEXT PS NEXT ELFEXT PS ELFEXT Ω dB/100m dB dB/100m dB/100m dB/100m dB/100m 1.0 100±15 ≤2.04 ≥20.00 ≥65.30 ≥62.30 ≥64.00 ≥61.00 4.0 ≤4.05 ≥23.01 ≥56.27 ≥53.27 ≥51.96 ≥48.96 8.0 ≤5.77 ≥24.52 ≥51.75 ≥48.75 ≥45.94 ≥42.94 10.0 ≤6.47 ≥25.00 ≥50.30 ≥47.30 ≥44.00 ≥41.00 16.0 ≤8.25 ≥25.00 ≥47.24 ≥44.24 ≥39.92 ≥36.92 25.0 ≤10.42 ≥24.32 ≥44.33 ≥41.33 ≥36.04 ≥33.04 31.2 ≤11.71 ≥23.65 ≥42.89 ≥39.89 ≥34.12 ≥31.12 62.5 ≤16.99 ≥21.54 ≥38.36 ≥35.36 ≥28.08 ≥25.08 100 ≤21.98 ≥20.11 ≥35.30 ≥32.30 ≥24.00 ≥21.00 Applications: Widely used for cabling between telecommunication outlet of working areas and distribution frame of cross connection closet in building GENERIC CABLING SYSTEM, and the cabling between user telecommunication outlet and distribution frame in residential cabling system. National University of Singapore Teaching Building RoHS 0.5mm Cat5E U UTP Outside Plant Cable Support OEM ODM 2 Singapore Government HDB RoHS 0.5mm Cat5E U UTP Outside Plant Cable Support OEM ODM 3 ​ Chengdu Metro Cabling RoHS 0.5mm Cat5E U UTP Outside Plant Cable Support OEM ODM 4 FAQ Cat.5E F-UTP Lan Cable Q1. Can I have a sample order for the cable? A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable. Q2. What about the lead time? A: 1 week for Sample preparing, 3-4 weeks for mass production. Q3. Do you have any MOQ limit for Lan Cable order? A: Low MOQ, 1pc for sample checking is available. 200 boxes (305m/box) for mass production Q5. How to proceed an order for Lan Cable? A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We provide packaging detail and confirm with customer. Then we arrange the production. Q6. Is it OK to print my logo on Lan cable product? A: Yes. Please inform us formally before our production. Q7: Do you offer guarantee for the products? A: Yes, we offer 25 years warranty to our products.

New product with WIFI6E—DR9074-6E(PN02.7) Features ■ Qualcomm Atheros QCN9074 ■ 6GHz, max 23dBm per chain, up to 4949Mbps ■ Single Band 6GHz 4x4 WiFi 6E (802.11ax) ■ 4 spatial streams (4SS) ■ M.2 E Key Interface ■ PCI Express 3.0 Interface Symbol Parameter Chipset Qualcomm Atheros QCN9074 WLAN Host Interface PCI Express 3.0 Interface System Memory 2Mbit serial I²C bus EEPROM Standard Operating Voltage 5V Operating Systems QSDK Host Interface M.2 E Key Antenna Cable / Port 4 x MMCX Connectors,4T4R Frequency Range 5.925GHz-7.125GHz Data Rates for WALN 6GHz, max 23dBm per chain, up to 4949Mbps Channel Spectrum Widths for WLAN Support 20/40/80/160MHz at 6GHz Modulation Techniques OFDMA: BPSK, QPSK, DBPSK, DQPSK,16-QAM, 64-QAM, 256- QAM,1024-QAM, 4096-QAM Temperature Range Operating: -20°C to 70°C, Storage: -40°C to 90°C Humidity Operating: 5% to 95% (non-condensing), Storage: Max. 90% (non- condensing) Certification TBD Power Consumption TBD Reference Design PN02.7 Dimensions (WxHxD) 57mm x 63mm x 6mm Wallys Communications (SuZhou) Co.,

Minimum Order: 1 bags

Philippine 60FT Q345 4.5mm thickness Steel Power Transmission Pole with bitumn Descripition of material: 1. Poles are made by the high-quality metal plants,which were molded into the multi-row cone-shaped vertical steel barwith hot galvanized anti-corrosion treatment 2. Light plate frame is made by high-quality stainless steel 3. Fastened bolts and nuts of stainless steel 60FT Q345 4.5mm Thickness Steel Power Pole Transmission Pole With Bitumn 0 Specification: Suit for Electricity distribution Shape Conoid ,Multi-pyramidal,Columniform,polygonal or conical Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Torlance of the dimenstion +- 2% Power 10 KV ~550 KV Safety Factor Safety factor for conducting wine : 8 Safety factor for grounding wine : 8 Design Load in Kg 300~ 1000 Kg appliced to 50cm from the to pole Marks Nane palte through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required Joint of Poles Insert mode,innerflange mode,face to face joint mode Design of pole Against earthquake of 8 grade Wind Speed 160 Km/Hour . 30 m /s Minimum yield strength 355 mpa Minimum ultimate tensile strength 490 mpa Max ultimate tensile strength 620 mpa Standard ISO 9001 Length of per section Within 14m once forming without slip joint Welding We has past flaw testing.Internal and external double welding makes the welding beautiful in shape Welding Standard :AWS ( American Welding Society ) D 1.1 Thickness 1 mm to 30 mm Production Process Rew material test → Cuttingj →Molding or bending → Welidng (longitudinal )→Dimension verify →Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages Packages Our poles as normal cover by Mat or straw bale at the top and bottom , anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data 60FT Q345 4.5mm Thickness Steel Power Pole Transmission Pole With Bitumn 1 Production Process Raw material test → Cutting →bending →Welding (longitudinal )→Dimension verify →Flange welding →Hole drilling →sample assemble → surface clean→ Galvanization or powder coating ,painting →Recalibration →Packages Quality Control We strictly follow the standard of ISO9001-2008. Quality is in the first place at every stage of production to ensure the product compliance to the specification/standards. Careful inspections are carried out by highly trained inspection engineers during every procedure from raw material stage to finished product and delivery. 60FT Q345 4.5mm Thickness Steel Power Pole Transmission Pole With Bitumn 2

Product Description 12D-FB BC TC PE NO.7101414 Construction Parameters: Inner Conductor 4.40mm Bare Copper Dielectric 12.40mm Foamed PE Shield Bonded AL-Foil Outer Conductor Nom. 13.20mm Tinned Copper Braid Jacket 15.60mm PE Black Jacket Thickness Application 12D-FB Cable Inner Conductor BC with Outer Conductor Tinned Copper Braid 50Ohm Coaxial Cable 0 Electrical Characteristics: Capacitance 82 pF/m Impedance 50 Ω Velocity of Propagation 81% Inner Conductor DCR 1.2 Ω/km Outer Conductor DCR 4.5 Ω/km Shielding Effectiveness ≥ 80 dB Return Loss ≥ 20 dB RoHS Yes Mechanical and Environmental Properties: Cable Bend Radius 78mm Operating Temp Range -40 ℃ to +85℃ Cable Diamensions 15.60mm Attenuation(20℃): Frequency (MHZ) Max Attenuation (dB/100m) 150 3.40 280 4.70 350 5.30 400 5.70 800 8.50 900 9.10 1200 10.80 1500 12.30 1900 14.20 2000 14.60 2500 16.60 Order Informations: Marking HELLOSIGNAL 12D-FB 50 Ohm COAXIAL CABLE ×××M Package Inquired Length on Roll, Wooden Spool, Pallet … Delivery time Normally 25 days after received the deposit. Brand HELLOSIGNAL® OR OEM

L3 managed 8 port Gigabit / 10G Uplink SFP+ Port Smart Network industrial Managed ethernet Fiber Switch Description The OFS-MXF8-3 series is a high performance 8-port industrial managed 1G/10G Ethernet switch with 8 1G/10G SFP+ ports. The switch supports STP/RSTP/MSTP. It also supports web-based network management, VLAN, QoS, SNMP , IGMP snooping and other network functions. LED indicators provide connection status when using the SFP option. Suitable for many applications such as intelligent transportation systems, IP surveillance and industrial networks. The rugged design with industrial level 3 ESD protection makes it suitable for many applications such as intelligent transportation systems, IP surveillance and industrial networks. This product is available in a mounting ear configuration.This product is available in a mounting ear configuration. 8× 10-Gigabit ports unlock the highest performance of your 10G/Multi-Gig bandwidth and devices, and provide up to 160 Gbps of switching capacity.Lightning-Fast Connections. Provides lightning-fast connections to 10G NAS, Server, 10G PCIe Adapter/ NIC, gaming computer, 10G WiFi 6 AP, 8K video, and more.Ideal for Various Scenarios. Built for lightning-fast connections in business and home offices, workstations, LAN parties, and home entertainment. Features 8* 1G/10G SFP+ Ethernet ports STP / RSTP / MSTP redundancy protocols and standards SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN network management IGMP Snooping multicast function Support ARP/RIP/OSPF/OSPFV3/BGP/Router Discovery/VRRP/ Route-Map/BFD three- layer routing WEB, Telnet, SSH, Console (CLI) open and close port, binding MAC and port 802.1x network access control 802.1Q protocol, Isolate network flow Radius Centralized password management Overcurrent protection and reverse polarity protection Unique DIN mount design makes mounting and removal simple Built-in 12V lead-acid battery charging circuit (optional). Please send us an inquiry and you will get the best price ! Ordering Information OFS-MXF8-3 8*1G/10G optical port, web management, CLI command line, L3,external power supply. L3 managed 8 port 1G/ 10G Uplink SFP+ Port Smart Network industrial Managed Ethernet Fiber Switch 0L3 managed 8 port 1G/ 10G Uplink SFP+ Port Smart Network industrial Managed Ethernet Fiber Switch 1L3 managed 8 port 1G/ 10G Uplink SFP+ Port Smart Network industrial Managed Ethernet Fiber Switch 2L3 managed 8 port 1G/ 10G Uplink SFP+ Port Smart Network industrial Managed Ethernet Fiber Switch 3L3 managed 8 port 1G/ 10G Uplink SFP+ Port Smart Network industrial Managed Ethernet Fiber Switch 4 L3 managed 8 port 1G/ 10G Uplink SFP+ Port Smart Network industrial Managed Ethernet Fiber Switch 5 Why Choose US: Advantage of our company : ①　National High-tech enterprise certification； ②　11 years optical innovative& production team ③　fully advanced production line and QC system ④　products are highly cost effective, quality stable and reliable ⑤　good characteristics of exclusive exquisite design and abundant products series. ⑥　Professional One stop supply & service; ⑦　OEM&ODM available; ⑧　Reliable and Timely customer services; We are pleasure to have you in touch and help you more ! to join us and make a Win-Win business !

SR-SG3428FC is a Layer 2 plus managed switch equipped with 24 10/100/1000M adaptive RJ45 ports, 4 10/100/1000M SFP fiber ports, 4 Combo ports and one Console port. It can work in a wide temperature range of 0℃~45℃ (0℉~113℉). It has perfect SNMP management with multiple security protection mechanisms, providing anti-attack techniques against SYN Flood, Land, ICMP Flood and other DOS types, supporting BPDU Filter, BPDU Guard. Provides 24 10/100/1000Mbps RJ45 ports, 4 Gigabit SFP fiber port, 4 Combo ports and 1 console port. With electric port indicator, optical port indicator, power input indicator, and system operation indicator. Supports IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x , IEEE802.3az. Support DHCP Snooping, DHCP Relay, Option 82, DHCP client. Supports QoS, port mirroring, link aggregation protocol. Supports perfect SNMP management, support VCT, DDM (Digital Diagnostic Monitoring) and other features, quickly detect network faults and reduce the difficulty of operation and maintenance.

Octagonal Hot Dip Galvanized Steel Tubular Pole Lap Joint Type Power Steel Poles Product Description: Our steel pole, steel poles , steel power poles , power distribution equipment , electric power transimission &distribution steel poles ,hot-dip-galvanized steel poles ,lamp poles ,street lamp poles ,solar street lamps steel poles ,high mast lamp poles,road lamp poles, the steel street lamp poles, hot-dip- galvanized steel lighting ,outdoor lighting ,outdoor lamps ,street lighting poles ,steel post ,street poles, lamp parts ,lighting fixture ,lighting poles ,lighting equipment ,lighting decoration ,lighting product , street lighting body, high mast lighting steel poles &tower,electric poles, round&square street lighting steel poles with double arm or single arm . Stainless steel poles, Flag mast stainless steel pole, aluminum street light poles, traffic lighting steel poles, telecom tower poles are made by hot-roll steel coil ,the process as cut plate, bending ,forming,automatic welding,drill holes ,quality check before galvanized, hot dip galvanized or powder coating , final quality check according by client required. Product Specification: Products Octagonal Hot Dip Galvanized Steel Tubular Pole Lap Joint Type Power Steel Poles Application Electrical Power Transformer Substation Voltage Grade 220KV Once Forming 16m Once forming without joint Connection structure Overlap / flange connection Shape Octagonal Welding According to AWS D 1.1, CO2 welding or submerged arc auto methods Life Period More than 25 years, it is according to installing environment Painting According to clients' request Joint Joint with insert mode, flange mode. Octagonal Hot Dip Galvanized Steel Tubular Pole Lap Joint Type Custom Painting 0 Production Process: All of our material are purchased from famous factory to assure the high quality. A factory certificate issued by the factory with stamp and signature must be provided before unloading the material in our factory , otherwise we have rights to refuse. Before put into production , all the material must be passed the chemical and physical analysis to make sure that they have met the requested strength and component. Inspection To assure our products qualified , we take steps as follows : 1. Management team : We have employed the experienced senior experts to take charge of the whole management ,especially the technical management and quality management . 2. Introducing ISO management :We are aware of ISO 9001:2008 certificate . 3. QC Inspection :It is our company policy that all the finished products should be inspected by our specialized QC in every manufacture step and before each shipment Design and Detail Lofting and designing software :We have transmission power pole designing software which can help us design all kinds of steel poles ,at the same time ,the TMA and LMA are adopted by us to design the drawing accurately Advantages: The Hot Dip Galvanized Electrical Power Steel Tubular Pole plays an important role in electrical power transmission and distribution industry. In order to meet the increasingly higher demand for steel tubular pole, our company design and produce many kinds of steel tubular pole for the power transmission and distribution system. Besides, our electrical steel tubular pole have been tested and approved by the Transmission Pole Tower Testing Station. As an alternative to the traditional wood and concrete poles, our hot dip galvanized steel tubular pole could be utilize to bear the conductors and electric distribution equipment, power transmission equipment, cables, etc. our company has more than 15 years' design & manufacture experence which enable us to handle volume orders with high quality and low cost. In order to provide better service for customers, we promise to reply within 24 Working Hours and technical support by E-mail and calling service. Packaging&Shipping: * Covered by Plastic Wrap or Mat or according to client's requests. * The Loading Pcs of Each Container could be calculated according to client's specification and data Quantity(Metric Tons) 1 - 1 >1 Est. Time(days) 20 To be negotiated Manufacturing: Raw material: Q235 or Q345 in China. We get the raw material checked in our lab test room. Silicon less than2%. We have carbon and sulfur analyzer to check the elements of the steel sheet. We'll return the steel if they are unqualified. So in this way, we can control the quality of the steel poles from the first beginning. Our factory owns advanced production lines and machines including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All insure us to produce steel poles with the best quality. After the fabrication process as cutting plate, bending, forming, automatic welding, drilling holes, we get poles checked before galvanized, hot dip galvanized and powder coating and finally we get poles checked according to client's requirements. Octagonal Hot Dip Galvanized Steel Tubular Pole Lap Joint Type Custom Painting 1

DR-AP4029(Outdoor) is a 2x2 2.4G&5G high power Radio AP Router which including 1x DR40X9(IPQ4019/IPQ4029) Board;1 x Onmi Antenna; 1 x POE Adapter(24V^1A~48V^0.6A);1 x Enclosure. Planar Antenna ■ 2 x 5G Antenna ■ 5G: 16dbi DRA25 Antenna ElectricalProperties : Frequency Range：2.4~2.5&5.15~5.85GHz Impedance：50Ω VSWR：2.0 Max （≤2.0） Gain(peak)：6±0.5dBi Polarization：Linea , r; Vertical Physical Properties : Cable：RG-141 Cable Connector：N-type PLUG Antenna CAP：ABS OperatingTemp：-40℃~+65℃ Storage Temp：-40℃~+75℃ CableTemp：＜+250℃ Enclosure ■ Dimension: 275x140x48mm ■ UV Protected and Durable ABS Radome ■ IP67 Waterproof Level ■ Support Wallys DR4029

Minimum Order: 1 bags

ME936 HUA-WEI ME936 module 4G LTE WCDMA/HSDPA/HSUPA/HSPA+ GPRS/EDGE NGFF Modules Hua Wei ME936 is an LTE module 4G NGFF interface, LTE support (FDD) B1 / B2 / B3 / B4 / B5 / B7 / B8 / B13 / B17 / B20, penta-band DC-HSPA + / HSPA + / HSPA / WCDMA for North American and European network covering low power consumption, global navigation satellite systems (GNSS), and North American and European carrier certifications, which makes it easier and more flexible, and integration into the terminals. In addition, the ME936 support NGFF characteristics to optimize performance, power consumption, and ease of use. ME936 is an ideal choice for the Ultrabook, laptop, tablet, and so on. D. Features: Brand: Huawei Model: ME936 Operating range: LTE: BI / B2 / B3 / B4 / B5 / B7 / B8 / B13 / B17 / B20 WCDMA / HSDPA / HSUPA / HSPA +: 850 MHz / 900 MHz / 1700 MHz (AWS) / 1900 MHz / 2100 MHz GPRS / EDGE: 850 MHz / 900 MHz / 1800 MHz / 1900 MHz GPS / GLONASS: L1 Data transfer rate: WCDMA PS: UL (384 kbps) / DL (384 kb) DC-HSPA +: UL (11 Mbps) / DL (42 Mbps) LTE FDD: UL (50 Mbps) / DL (100 Mbps) bandwidth @ 20 M (CAT3) GPRS / EDGE multi-slot class 12 GPRS data services: 85.6 kbit / UL / DL 107 kbit / s EDGE: 236.8 kbit / UL / DL 296 kbit / s HSPA +: 5.76 Mbps UL / DL 21.6 Mbit / s Interface: NGFF: Supply voltage range: 3.135 V ~ 4.4 (3.3 recommended) GPS / GLONASS GNSS: Autonomous GPS, A-GPS, GPS XTRA, GLONASS Features: Hot-swappable SIM IPV6 BodySAR Ultrabook function support (LAW, wi-fi unloading, DPTF) MIN USB (Link Power Management) tunable Antenna MO and MT support PDU format support point-to-point base station and The interface antenna Main and auxiliary (supporting Diversity and GPS at the same time) MM4829-2702RA4 for MURATA or other equivalent parts Sms-new signal message. SMS Management: read SMS, write SMS, send SMS, delete SMS and SMS list MO and MT support point-to-point operating system Windows 7/8 / 8.1 / Android 4.0 or later / Chrome OS physical Features Dimensions (L × W × H): 42 mm × 30 mm × 2.3 mm Weight: about 6 grams Power Supply Supply voltage range 3.135V~4.4V (3.3 V recommended) Temp Range Normal operation: -10°C to +55°C Extended operation: -20°C to +70°C Storage: -40°C to +85°C Data Transfer Rate WCDMA PS: UL (384 kbps)/ DL (384 kbps) DC-HSPA+ : UL (11 Mbps)/ DL (42 Mbps) LTE FDD: UL (50 Mbps)/ DL (100 Mbps) @Bandwidth 20M (CAT3) GPRS/EDGE: Multi-slot Class 12 Module show: HUA-WEI ME936 4G LTE Module WCDMA/HSDPA/HSUPA/HSPA+ GPRS / EDGE NGFF Modules 0 HUA-WEI ME936 4G LTE Module WCDMA/HSDPA/HSUPA/HSPA+ GPRS / EDGE NGFF Modules 1 ABOUT US TOP offers communication antennas & modules with wonderful solution, Perfect after-sales service, strict quality testing and competitive price. module brands includes Sierra Wiressless, Simcom, QUECTEL,Cinterion, U-blox, Hua wei , ZTE, Holux, GlobaTop, Skylab, Telit, etc. We're also one of the biggest stocking distributors of active and passive electronic components located in Shenzhen,