Telecommunications & Networks

1. Overview * SUR3108XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * SUR3108XR is based on mature and stable, cost-effective XPON technology. * SUR3108XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X 2. Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4and IPv6 Dual mode * Support 4G WIFIand 2*2 MIMO * Support LAN IP and DHCP Server configuration * Support Port Mappingand Loop-Detect * Support Firewall function andACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system 3. Application * Typical Solution:FTTH(Fiber To The Home) * Typical Business:INTERNET,IPTV,WIFI etc Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power:+0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector Chip Spec RTL9601D ,CPU 300MHz,DDR2 32MB Flash SPI Nor Flash 16MB LAN Interface 1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector LED 4 LED, For Status of PWR、LOS、PON、LINK/ACT Push-Button 2,For Function of Power on/off,Reset Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply : DC 12V/0.5A Power Consumption: <3W Dimension: 120mmx78mmx30mm(L×W×H) Net Weight: 0.13Kg

Minimum Order: 1 bags

1. Overview * SUR3107XR is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides different services access. * SUR3107XR is based on mature and stable, cost-effective XPON technology. * SUR3107XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X 2. Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/IPoE/Static IP and Bridge mode * Support IPv4 and IPv6 Dual mode * Support 4G WIFI and 2*2 MIMO * Support CATV interface for Video Service and remote control by Major OLT * Support LAN IP and DHCP Server configuration * Support Port Mapping and Loop-Detect * Support Firewall function and ACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system 3.Application * Typical Solution：FTTH(Fiber To The Home) * Typical Business：INTERNET、IPTV、WIFI 、CATV etc Technical item Details PON Interface 1 GPON BOB （Class B+/Class C+） Receiving sensitivity: ≤-27dBm/≤-29dBm Transmitting optical power:+0.5~+5dBm/+2~+7dBm Transmission distance: 20KM Wavelength TX: 1310nm, RX: 1490nm Optical Interface SC/UPC Connector Chip Spec RTL9601D ,CPU 300MHz,DDR2 32MB Flash SPI Nor Flash 16MB LAN Interface 1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector LED 4 LED, For Status of PWR、LOS、PON、LINK/ACT Push-Button 2,For Function of Power on/off,Reset Operating Condition Temperature: 0℃~+50℃ Humidity: 10%～90%（non-condensing） Storing Condition Temperature: -30℃~+60℃ Humidity: 10%~90%（non-condensing） Power Supply: DC 12V/0.5A Power Consumption: <3W Dimension: 120mmx78mmx30mm(L×W×H) Net Weight: 0.13Kg

Minimum Order: 1 bags

1. Overview * SUR6002XR is designed as HGU (Home Gateway Unit) in different FTTH solutions.The carrier-class FTTH application provides data and video service access . * SUR6002XR is based on mature and stable, cost-effective XPON technology. It could switch automatically into EPON mode or GPON mode when access to the EPON OLT and GPON OLT. * SUR6002XR adopts high reliability, easy management, configuration flexibility and good quality of service guarantees to meet the technical performance of EPON Standard of China Telecom CTC3.0 and GPON Standard of ITU-TG.984.X 2. Functional Feature * Support EPON/GPON mode and switch mode automatically * Support Route mode for PPPoE/DHCP/Static IP and Bridge mode * Support IPv4 and IPv6 * Support 2.4G&5.8G WIFI and Multiple SSID * Support LAN IP and DHCP Server configuration * Support Port Mapping and Loop-Detect * Support Firewall function and ACL function * Support IGMP Snooping/Proxy multicast feature * Support TR069 remote configuration and maintenance * Specialized design for system breakdown prevention to maintain stable system 3.Application * Typical Solution：FTTH(Fiber To The Home) * Typical Business：INTERNET、IPTV、WIFI 、VOIP etc

Minimum Order: 1 bags

Short Description: EPON OLT is a high integration and medium capacity cassette EPON OLT designed for operators’ access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network——based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. The OLT provides 16 downlink 1000M EPON ports,4*GE SFP, 4*GE COMBO port and 2 *10G SFP for uplink. The height is only 1U for easy installation and space saving. It adopts the advanced technology, offering efficient EPON solution. Moreover, it saves a lot cost for operators for it can support different ONU hybrid networking. SEND EMAIL TO US

Minimum Order: 1 bags

Short Description: Feature: SFP+ package with LC connector 1270nm/1330nm DFB-LD Transmitter A:1270TX/1330RX B:1330TX/1270RX Distance up to 60km(10,20,40,60KM) Power Dissipation < 1.5W LVPECL compatible data input/output interface Low EMI and excellent ESD protection laser safety standard IEC-60825 compliant Compatible with RoHS Compliant with MSA SFP+ Specification SFF-8431 Compatible with SFF8472 Compliant with IEEE 802.3ae 10GBASE-LR/LW Dispersion tolerance up to 40ps/nm over G.651

Minimum Order: 1 bags

Short Description: Features : Multi-sourced SFP package with dual LC/PC receptacles; Single mode dual fibers transmission Up to 20~80Km with 9/125μm SMF; AC coupled for Rx and Tx side Two temperature ranges: 0°C to +70°C for commercial level, -40°C to +85°C for industrial level; operates at data rate 1.25Gbps; Complies with MIL-STD-883/GR-468 Complies with lots of brands of switch such as cisco h3c……. Can be with or without DDM

Minimum Order: 1 bags

Short Description: Product Features: Compatible IEEE 802.3ah 1000BASE-PX20++ Enhanced GEPON application Applied to EPON OLT for a Single Fiber Bi-directional EPON System SFP, Single SC connector, Digital Diagnostic Interface Compliant with SFF-8472 Burst Digital Receiving Signal Strength Indication (RSSI) Single 3.3V power supply Operation case temperature -10~70°C for commercial RoHS-6 compliance

Minimum Order: 1 bags

Short Description: RPOE switch has intelligent device Power management features solving a major problem of powering the device for internet service provider. This switch can be powered using remote power from customer using specially designed POE injector or any standard POE injector(24v DC,0.75amp).This eliminates the needs of arranging power at building top (ups not require/No need to pay more money to customer or society).This saves lot of money of ISPs and improves uninterrupted service to the customer. PRODUCT FEATURE: REVERSE POE TECHNOLOGY:8 Port 10/100 Reverse POE switch which has latest generation of fast Ethernet reverse POE switching technology. It contains 7*10/100 base T Reverse Poe ports (RPOE),1*10/100 Base date Uplink Port&12V DC out for Powering ONU. Supports Auto-Negotiation: Each of the ports automatically detect whether connected network devices are running at 10Mbps or 100Mbps and half-duplex or full-duplex mode, and adjusts the speed and mode accordingly ensuring easy and hassle-free operation. Supports Non-blocking Wire Speed: The switch forwards and receives traffic seamlessly with its Non-blocking wire- speed. Every port of the Switch supports speeds up to 200Mbps in full-duplex mode simultaneously, providing full wire speed to connected devices and allowing you to run a high speed network smoothly. Cascading support: switches can be cascaded for more users per Building (Up to 1 Main+3 switches ) Port base Isolation u/Hardware VLAN: The feature of Port Isolation is implemented in this unit where in the Ethernet Date of the Uplink Port can be transferred to any of the Downlink ports but the individual Downlink ports cannot communicate with each other. Over voltage Protection: Over voltage Protection is provided on each date port to eliminate damage due to connection of higher voltage(Higher than 24V DC. Up to 80V DC). By mistake if user connect more than 24V POE injector then switch will goes on power off mode and will start working again once this high voltage source is removed. Over current Protection: We have provided over current protection on each port to prevent damage to the switch in case of high current flowing due to any reason. This is provided using Resettable Fuse to facilitate easy maintenance and avoiding frequent change of blown fuse. PRODUCT APPLICATION: 7*10/100 Base T Reverse POE Ports(RPOE) & 1*10/100 Base T Uplink Port & 12V DC Power out for Powering ONU

Minimum Order: 1 bags

Short Description: Features： In accordance with Ethernet standards IEEE802.3, 10/100/1000Base-TX to 1000Base-FX Supported Ports: LC for optical fiber; RJ45 for twisted pair Auto-adaptation rate and full/half-duplex mode supported at twisted pair port Auto MDI/MDIX supported without need of cable selection Up to 6 LEDs for status indication of optical power port and UTP port External and built-in DC power supplies provided Up to 1024 MAC addresses supported 512 kb data storage integrated, and 802.1X original MAC address authentication supported Conflicting frames detection in half- duplex and flow control in full duplex supported LFP function can selectable before order 1.Introduction 10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100/1000Base-TX to 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users’ needs, achieving high-speed remote interconnection for up to 100 km’s relay-free computer data network. With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high-reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.

Minimum Order: 1 bags

Short Description: 10/100/1000M adaptive fast Ethernet optical Media Converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100/1000Base-TX to 1000Base-FX network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users’ needs, achieving high-speed remote interconnection for up to 100 km’s relay-free computer data network.We can offer dual fiber multi-mode as well single fiber single-mode. Application : With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high- reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.

Minimum Order: 1 bags

Short Description: 10/100M adaptive fast Ethernet optical media converter is a new product used for optical transmission via high-speed Ethernet. It is capable of switching between twisted pair and optical and relaying across 10/100 Base- TX and 100 Base-Fx network segments, meeting long-distance, high-speed and high-broadband fast Ethernet workgroup users’ needs, achieving high-speed remote interconnection for up to 120 km’s relay-free computer data network. We can offer dual fiber multi-mode as well single fiber single-mode. Application : With steady and reliable performance, design in accordance with Ethernet standard and lightning protection, it is particularly applicable to a wide range of fields requiring a variety of broadband data network and high- reliability data transmission or dedicated IP data transfer network, such as telecommunication, cable television, railway, military, finance and securities, customs, civil aviation, shipping, power, water conservancy and oilfield etc, and is an ideal type of facility to build broadband campus network, cable TV and intelligent broadband FTTB/FTTH networks.

Minimum Order: 1 bags

Short Description: EPON OLT is a high integration and medium capacity cassette EPON OLT designed for operators’ access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network—— based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. EPON OLT series possesses excellent openness, large capacity, high reliability, complete software function, efficient bandwidth utilization and Ethernet business support ability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction. (EPON OLT 4 port ) ITEM: 4/8 PON port, Service Port: 4/8 PON port 8*GE, 4"10G SFP optical Redundancy Design Dual Voltage Regulators Power Supply ‘AC: input100~240V * 2 47/63Hz Power Consumption =45W Dimensions (Width x Depth x Height) 440mm x44mmx260mm Weight (Full-Loaded) =4.5kg Environmental Requirements: Working temperature: ~10°C~55°C Storage temperature: -40°C~70°C Relative humidity: 10%~90%, non-condensing

Minimum Order: 1 bags

Bathroom Basin Stainless Steel Angle Valve 1 Way SUS 201 Angle Valve Made of SUS304 stainless steel to ensure quality and life, no harm to human health, and no harmful metal products to protect you and your family. The valves have blue and red mark, blue for cold water pipes, red for hot water pipes. adjust water pressure; also used to check and control home waterways during maintenance Size Information Each product length * width * height(mm) 10*5.5*3.5 Gross weight per box (kgs) 14.9 Delivery date 7-15 DAYS Each box of product length * width * height(cm) 38*28.5*22.5 Maximum number of samples per request 10 Custom Packaging OEM Each net weight (g) 186 LOGO OEM Pattern Customization OEM

Short Description: EPON OLT is a high integration and medium capacity cassette EPON OLT designed for operators’access and enterprise campus network. It follows the IEEE802.3 ah technical standards and meets the EPON OLT equipment requirements of YD/T 1945-2006 Technical requirements for access network——based on Ethernet Passive Optical Network (EPON) and China telecom EPON technical requirements 3.0. EPON OLT series possesses excellent openness, large capacity, high reliability, complete software function, efficient bandwidth utilization and Ethernet business support ability, widely applied to the operator front-end network coverage, private network construction, enterprise campus access and other access network construction. The OLT provides 4 downlink 1.25G EPON ports, 8 * GE LAN Ethernet ports and 4*GE sfp optical for uplink. The height is only 1U for easy installation and space saving. It adopts the advanced technology, offering efficient EPON solution. Moreover, it saves a lot cost for operators for it can support different ONU hybrid networking. (EPON OLT 4 port ) ITEM: 4/8 PON port, Service Port: 4/8 PON port 8*GE, 4"10G SFP optical Redundancy Design Dual Voltage Regulators Power Supply ‘AC: input100~240V * 2 47/63Hz Power Consumption =45W Dimensions (Width x Depth x Height) 440mm x44mmx260mm Weight (Full-Loaded) =4.5kg Environmental Requirements: Working temperature: ~10°C~55°C Storage temperature: -40°C~70°C Relative humidity: 10%~90%, non-condensing

Minimum Order: 1 bags