Other Welding & Soldering Equipment

Perovskite P4 laser edge cleaning equipment is specially designed for precision trimming of perovskite solar cell edges. It uses high-energy pulsed laser technology and galvanometer field mirror scanning system to accurately remove battery edge burrs, residual film and conductive layer redundancy, ensure the edge is flat and defect-free, and eliminate leakage hazards. Through non- contact processing and micron-level positioning (accuracy ≤30μm), substrate damage is avoided and the stability of the battery structure is maintained. Integrated intelligent visual positioning and real-time closed-loop control, adapted to high-speed processing of glass/flexible substrates, synchronously optimize edge passivation effects, significantly improve component weather resistance and photoelectric conversion efficiency, help mass production yield break through 95%+, and enable large-scale production of high-efficiency batteries.

Thin-film solar module laser scribing experimental system PLS Series 1. High-precision processing: micron-level scribing accuracy (line width ≤ 20μm) ensures efficient segmentation and series connection of battery cells and improves photoelectric conversion efficiency. 2. Non-destructive process: short-pulse laser technology accurately controls the heat-affected zone to avoid damage to the perovskite active layer and ensure battery performance.

Perovskite Solar Cell Industry/3C Industry Film cutting machine is an advanced industrial device designed to precisely cut various thin-film materials, such as optical films, flexible PCBs, cleanroom materials, and adhesive layers. These machines ensure clean, burr-free edges with high repeatability, improving production efficiency and product quality.

Laser Scribing Machine A laser scribing machine is a high-precision, non-contact laser processing system used to cut, isolate, or pattern thin-film materials—especially in perovskite solar cells and flexible electronics. As a core component of an advanced laser patterning system, it enables accurate execution of P1, P2, and P3 scribing steps, critical for cell efficiency and module integrity. Our laser scribing solutions—also referred to as laser scribe machines—feature micron- level accuracy, automated alignment, and multi-wavelength laser compatibility, making them ideal for high-speed, low-damage processing in both R&D and industrial-scale production environments.

Gantry FSW Machine is a heavy-duty, high-precision friction stir welding system designed for large-scale industrial applications. Featuring a robust gantry structure, it delivers superior stability and welding force for joining aluminum, copper, magnesium, and other non-ferrous alloys. Unlike traditional welding, FSW produces defect-free, high-strength welds without melting the base material, making it ideal for critical structural components.

ROBOTIC FRICTION STIR WELDING Robotic Friction Stir Welding (RFSW) is an advanced solid-state joining technology that integrates friction stir welding (FSW) with a multi-axis robotic arm. Instead of melting the materials, RFSW uses a rotating tool to generate frictional heat and plastic deformation, creating high-strength joints between metals—especially aluminum, magnesium, and copper alloys. Product Advantages Precision, Efficiency, Intelligence Engineered for Unmatched Performance in Advanced Metal Joining

FRICTION STIR WELDING (FSW) TOOLS Friction stir welding tool is a critical component in the FSW process. It consists of a rotating shoulder and pin (probe) that generates frictional heat, softens the base material, and mechanically stirs it to form a solid-state joint. Unlike conventional welding consumables, FSW tools do not melt or deposit material. Instead, they facilitate precise plastic deformation and forge a high- integrity bond between workpieces without filler metals or shielding gases.

FRICTION STIR WELDING(FSW) PRODUCTS FSW Welded Parts are components or assemblies created using friction stir welding. Unlike conventional fusion welding, FSW joins materials without melting, which eliminates issues like porosity, cracking, and distortion. The result is a seamless, high-integrity joint with superior mechanical performance. These parts are widely used in industries that demand high reliability, lightweight structures, and corrosion resistance.

FRICTION STIR WELDING (FSW) MACHINES Friction Stir Welding Machine (FSW Machine) is a state-of-the-art solid-state joining technology widely adopted in aerospace, rail transit, automotive, shipbuilding, and energy industries. Unlike traditional fusion welding, FSW does not involve melting. Instead, it uses a non-consumable rotating tool to generate frictional heat and plastic deformation at the joint, resulting in superior weld quality, minimal distortion, and excellent mechanical properties.

Lap joint flanges are available in many sizes and classes; they are also suitable for elevated temperatures and pressures. Lap joint flanges have a beveled edge on their inside diameter and fit over a pipe. They are most commonly used with a stub end, which is typically welded to the pipe, leaving the lap joint free to rotate around it. Lap joint flanges are especially useful because they eliminate the possibility of issues with bolt hole alignment. They are often used in applications that require frequent dismantling. JSFITTINGS offers lap joint flanges in accordance with DIN EN 1092-1/02, ASME B16.5, and EN PN 10, available in both carbon steel and stainless steel. What is a Lap Joint flange? Lap Joint flanges are sometimes referred to by other names, including: Stub end flange Loose flange Backing flange Vanstone and Backing Ring Van Stone flanges. A lap joint flange (LJF) is an assembly of two elements involving a stub end and a lap joint ring flange (also called a ‘lap joint flange’). To be technically correct, the stub end is not part of a lap joint flange. However, a lap joint flange is always used in conjunction with a stub end, so both parts are often collectively referred to as a ‘lap joint flange’. Lap joint flanges are suitable for piping systems, allowing easy disassembly, while rolled angle rings are suitable for structural applications to create curved or rounded shapes within various structures. Lap Joint flanges are very similar to Slip On flanges. However, Lap Joint flanges include a radius at the intersection of the flange face that is made to accommodate the flared portion of the Stub End, making it only compatible with Stub Ends. Materials for Lap Joint flanges and Lap Joint Stub Ends vary and may even differ in a single implementation to allow for greater cost flexibility. Materials typically used for Lap Joint flanges include a range of stainless steel, carbon steel, and other alloy materials. Lap Joint Flange ASME B16.5 Lap joint flanges are available in many sizes and classes; they are also suitable for elevated temperatures and pressures. Generally, a lap joint flange can be used for the same applications as a welding neck flange. These flanges are available in common dimensions like other flange types, making it easy to integrate them into existing piping systems or use them alongside other piping components. Stub Ends also match both pipe material and wall schedule to maintain both inside and outside diameters of your piping process. This style is typically used in engineered piping systems with critical wall thickness requirements. The advantages of the lap joint flange design are: 1. Inexpensive. 2. Well-suited for corrosive applications. 3. Requires only a single full penetration butt weld. 4. Only the stub end has contact with the process medium 5. It can be easily adjusted to align with the mating flange (the flange can be rotated until the bolt holes align). 6. It is available in almost all pipe diameters. 7. Ideal for systems where frequent disassembly of the flange is required, e.g., when cleaning or inspection is required. There are some limitations on the lap joint flange’s usage, mostly due to its bulkier multiple-component design. Lap joint flanges cannot be used for small- sized piping. As a leading manufacturer of carbon steel pipe fittings and flanges across China, JSFITTINGS has more than 35 years of experience serving industries of all sizes. Our expert sales analysts are available today to help you choose the ideal lap joint flanges or rolled angle rings for your needs. Contact us today to learn more about our selection of high-quality steel flanges.

Lithium ion pilot line The main equipment consists of high temperature negative pressure formation equipment, capacity grading pressure bed equipment, formation and capacity grading charge and discharge power cabinet. The main equipment consists of lithium ion pilot line are high temperature negative pressure formation equipment, capacity grading pressure bed equipment, formation and capacity grading charge and discharge power cabinet, nail pulling/nail insertion equipment, coding scanning equipment, pre- charge/formation/capacity grading needle bed equipment, pre-charge/formation/ capacity grading power cabinet equipment, destacking/palletizing & NG selection equipment, OCV/DCIR test equipment, secondary electrolyte filling, cleaning, sealing equipment, grading equipment, high temperature & normal temperature standing shelves, logistics conveying lines, WCS/WMS/MES systems. Role of Lithium Ion Pilot Line This equipment is mainly used for lithium ion pilot line automatic winding of cylindrical cells. Main action process: cathode, anode electrode and separator feeding method are all coil feeding method, cathode, anode electrode and separator are actively unwinded, respectively through dust removal, iron removal and electrostatic removal treatment into the winding part, and according to its process requirements for winding, automatic change of station after winding, cut off the separator, attach the termination tape, finished products automatic unloading, (through hot holes, inserts, code scanning, short circuit detection) and defective products rejected, good products are sent to the post-project, to achieve the production of fully automated cylindrical cells lithium battery Cell Pilot Line is mainly used for automatic cutting and automatic lamination of electrodes of lithium-ion batteries.

Prismatic lithium battery New AVIC large single cell 3.2V ternary lithium battery phosphate battery automotive power storage battery, mainly used in new energy vehicles, power vehicles, light buses, energy forklifts, two- wheel/three-wheel/four-wheel trams, and energy storage industry applications. 1. Fundamental Information of prismatic cell assembly    1.1.  Product Type Prismatic LFP Cell With Aluminum Shell 1.2.  Product Model LF280K 2. Cell Specification of lifepo4 prismatic 2.1.  Fundamental Parameters

SUMMARIZE: The equipment uses high-precision standard instrumentation, high-voltage relay switching, reliable test results and safe to use; The equipment can meet the different testing requirements of modules, single box, PACK packs, etc; The equipment is easy to expand and can be customized with different testing hardware and software functions according to the battery off-line testing requirements; The equipment software supports docking BMS communication protocols, collects relevant data according to product requirements, and makes judgment. Insulation withstand voltage test and judgment CAN, 485 communication function Single/total voltage test SOC function test SOH function test Temperature acquisition test

Minimum Order: 1 bags

SUMMARIZE: The device has high charging and discharging efficiency,with a 5V battery charging rate of up to 85% and dischiarging rÃite of up to90% energy feedback, low heat generation; Adppting 24bit ADc, with high voltage and current dccuracy and good stability; Indepiendent charging and discharging conditions canbe set far each channel; Equipped with complete input and output, software andhardivare protection, reverse connection protection, andpower outage continuationProtection and other functibns; Chanriel start without impulse current, constant flow andconstant voltage seamless transition, without any curientSudden 'wave;Integrated management of multi-layer networks, centralized contrpl by one computer; Modular design concept, box plug-in design, easy to maintain.

Minimum Order: 1 bags