Wires & Cables

Model P700 Which can change 4G wireless network to RJ45 cable network Main chip set ASR1803S Network Type FDD-LTE, TDD-LTE, WCDMA/HSPA+ Frequency Scope LTE B1/B3/B8/B38/B39/B40/B41 (More bands can be added such as B2/4/5/7/20...) TD-SCDMA B34/B39 WCDMA 2100/900MHz Data Rate LTE FDD/TDD (Cat. 4) DL 150Mbps, UL 50Mbps 3G HSPA+ DL 21Mbps, UL 5.76Mbps 3G TD-SCDMA DL 2.8Mbps, UL 2.2Mbps Support System Windows XP,Windows Vista,Windows 7,Windows 8/8.1 MAC OS X 10.7+ Ethernet network A RJ45 interface, 10/100M adaptive, Support WLAN USIM/SIM Micro SIM card slot SD Card Support Micro SD memory extension, 32GB in max LED 2G/3G/4G signal indicator light,  WIFI status indicator lamp Power supply mode DC 12V Power Input voltage: 12V/1A maximum power consumption: < 2.5W WIFI Standard Protocol: 802.11 b/g/n, up to 72Mbps WIFI Frequency 2412 MHz-2472 MHz

This is a 4G WiFi Dongle,supporting multiple 4G networks, internet sharing up to 10 wifi users. Powered by devices with USB port via such as phone charger/car charger,/power bank,etc. After inserting a SIM Card and powering it on, you can enjoy 4G network to surf the Internet anytime and anywhere. Selling Point: 1.【Instructions for Use】 It's not only a USB modem, but also a WiFi hotspot, so you can enjoy WiFi with family and friends. No need to connect to broadband,just need a 3G/4G SIM card,you can connect to network. 2.【Easy to Use】Plug and play hotspot modem, as long as there is power, you can easily go online. Simply plug directly into the laptop's USB port to transfer data. And at the same time,you can also easily connect to WiFi whether it's your cell phone, laptop, desktop or tablet. 3.【High Speed Transmission Signals】 With a wireless connection speed of up to 150Mbps, you can enjoy a powerful web experience for surfing, chatting or playing online games. The superior range. Built-in 4G/3G+WiFi antenna for optimal coverage and reliability, as well as increased signal strength, so you can enjoy a reliable wireless connection anytime, anywhere

1. 【Easy to Use】Simply insert the Nano SIM card in the router, connect the power, and start enjoying stable and fast wireless networks.Just easily connect to WiFi whether it's your cell phone, laptop, desktop or tablet. 2. 【Converting 4G signals to LAN】There are 3 RJ45 Ethernet LAN port available which enable desktop computer access to internet via a network cable. 3.【High Gain Antenna】4 external high gain antennas greatly enhance the sensitivity of the router; it can improve the signal quality of 4G LTE and WiFi, which is convenient for establishing WiFi connection in apartments, trucks, remote mountain villages, or when temporary use of the Internet is needed. 4.【Multi-Device Sharing】The sim card dongle supports access to 32 devices. As long as there are WiFi-enabled devices, they can be connected and used, such as mobile phones, smart robots, iPads, sweeping robots, smart speakers, cameras, TVs, computers, etc.

GS26 is a portable 4G pocket WiFi router, using Qualcomm chipset. It supports global bands and has Asian/African, European/Middle east/Oceania versions to choose from.It is WiFi 802.11a/b/g/n that supporting 10 different WiFi devices (laptops, iPhone, smartphone, iPad, tablet, gaming consoles and many more). Convenient for travelling! Up to 6 hours of working time including 2100 mAh battery. Getspeed Portable Mobile WiFi Router Selling Point: 1.Durable Material: This portable internet hotspot with 2100mAh battery is made from premium and durable material, long service life. 2.High Stability: This portable internet hotspot guarantees network speed and stability, and does not rely on network cables. 3.Wireless Design: This wireless hotspot router is small in size and light in weight, connect your smart home without a network cable. 4.Increase Coverage: This SIM card router uses 4G Internet access via SIM card. Increase WiFi coverage area and eliminate network dead angle.

P65 is a portable 4G pocket WiFi router, using Qualcomm chipset. It supports global bands and has Asian/African, European/Middle east/Oceania versions to choose from.It is WiFi 802.11a/b/g/n that supporting 10 different WiFi devices (laptops, iPhone, smartphone, iPad, tablet, gaming consoles and many more). Convenient for travelling! Up to 72 hours of working time including 10000 mAh battery. Selling Point: 1.Durable Material: This portable internet hotspot with 10000mAh battery is made from premium and durable material, long service life. 2.High Stability: This portable internet hotspot guarantees network speed and stability, and does not rely on network cables.

ZTE R8862A RRU (Radio Remote Unit) is a high-performance macro radio frequency remote unit launched by ZTE for wireless communication networks. The RRU plays an important role in the wireless communication system and is responsible for converting baseband signals into radio frequency signals and transmitting and receiving them through the antenna. Item Value Model Number R8862A Type RRU Place of Origin Hebei,China Brand Name ZTE Use Telecom Equipment Warranty Time 1 Year Condition New Or Used Package As requirement

HUAWEI R4830N2 rectifier is a high-efficiency, high-power-density digital rectifier module. It can achieve an input voltage range of 85~300VAC and has a rated output voltage conversion capability of 53.5VDC. This rectifier has many advantages, such as soft-start function, complete input and output protection, low noise, and can be used in parallel. Item value Model Number R4830N2 Type rectifier module Place of Origin Hebei,China Brand Name HUAWEI Use telecom equipment MOQ 1 Warranty 12 months Condition New Or Used Package As requirement

NOKIA AMIA BBU is a baseband processing unit (Baseband Unit, referred to as BBU) launched by Nokia. BBU is a key component in the wireless communication network and is mainly responsible for the processing and management of baseband signals. Item Value Model Number AMIA Type BBU Place of Origin Hebei,China Brand Name NOKIA Use Telecom Equipment Warranty Time 1 Year Part No 473098A.102 Condition New Or Used It should be noted that the specific NOKIA AMIA BBU model, specifications and performance parameters may vary depending on product versions and configurations. Therefore, when selecting and using BBU, it is recommended to consult Nokia's official documentation or contact the relevant supplier to obtain accurate information.

Item Value Model Number UMPTb4 Type Baseband Place of Origin Hebei,China Brand Name HUAWEI Use Telecom Equipment Warranty Time 1 Year Condition New Or Used Package As requirement HUAWEI UMPTb4 baseband board of Huawei. Baseband board is the key component of the base station equipment in the mobile communication system, which is used to process the baseband part of the wireless signal. The baseband board typically includes hardware components such as a digital signal processor (DSP), field programmable gate array (FPGA), digital signal converter (DAC), and analog signal converter (ADC), as well as software algorithms for wireless signal modulation, demodulation, encoding, decoding, and other functions.

XLPE Insulated Power Cable Product Description Application : This product is suitable for transmission and distribution system at the voltage from LV to MV. The power cables can be flame retardant when used as type ZR. Installation Temperature : The installation temperature should be over 0C . If the ambient temperature is lower than 0C,the cable should be preheated. Operating Temperature : Max permissible continuous operating temperature of conductor shall not exceed 90C . Conductor Short-circuit Temperature : Max temperature at short-circuit shall not exceed 250C . The short-circuit duration shall not exceed 5 seconds. Bending Radius: 20( d+D) +/-5% for single core cable,15( d+D )+/-5% for multi- core cable. D=Actual outer diameter of cable (mm),d=Actual diameter of the conductor (mm) Standard: IEC60502, GB/T12706 or other standard required by customer. The requirements for flame retardant property is according to IEC60332-3 and GB18380. Packing: Steel/wooden reel, wooden reel or steel reel.

Aluminum Alloy Conductor Cable Product Description Since the early 1900s, aluminum and aluminum alloy conductor materials have been used by electrical utility companies for the transmission of electrical power within power grids across the country. In fact, over the years, aluminum has largely displaced copper conductors for these functions and has become the standard material for use in power transmission and distribution. If you’ve ever wondered why there’s no copper in the air, it’s because aluminum is the superior choice in every way. For starters, aluminum features twice the ampacity per pound as copper. In addition, it’s lighter, more flexible, and more corrosion-resistant. And MD Aluminum Alloy Conductor Cable much more cost- effective. As an example, if you’re an electron going all the way from say, for long distance power transmission, on the grid – you’re going to use the aluminum power highway. Thanks to a specially engineered aluminum alloy, Mingda feeder and service entrance cables now make it possible for commercial and residential users to enjoy the same reliability and economic advantages as power utilities. Aluminum Alloy Cable for Building 50% lighter than copper per pound 25% more flexible than copper easier and quicker to install similar conduit fill as copper for amps delivered

PVC Insulated Control Cable Product Description Control Cable is suitable for use in distribution equipment,instrumentation connection and control system at rated voltage 450/750V or less,The control cable can be made as flame retardant when customer required. Laying Temperature: during laying environment temperature shall not be less than 0℃,the cable should be preheated. Operating Temperature: max permissible continuous operating temperature of conductor shall not exceed 70℃. Bending Radius:16D for armored cable,8D for unarmored cable. D=actual outer diameter of cable ( mm ) Standard:GB9330-88 or other standards required by customers.The requirement for flame retardant property is according to IEC 60332-3,category B and C. Packing:Steel/wooden reel,wooden reel or steel reel. Description and Application Range of Cable Description Application Range Copper conductor/ PVC insulated/ PVC sheathed control cable For fixed laying indoors, in cable trench or conduit. Copper conductor/ PVC insulated/copper tape screened/ PVC sheathed control cable For fixed laying indoors,in cable trench or conduit when screen is required. Copper conductor/ PVC insulated/copper wire braiding screened/ PVC sheathed control cable Copper conductor/ PVC insulated/steel tape armored/ PVC sheathed control cable For fixed laying indoors,in cable trench, conduit or directly buried,the cable is able to bear larger mechanical force. Copper conductor/ PVC insulated/steel wire armored/ PVC sheathed control cable For fixed laying indoors,in cable trench, conduit or well.The cable is able to bear larger pulling force. Copper conductor/ PVC insulated/ PVC sheathed flexible control cable For fixed laying indoors when flexibility is required in moving. Copper conductor/ PVC insulated/copper wire braiding screened/ PVC sheathed control cable For fixed laying indoors when flexibility and screen are required in moving

BS Standard Cable Product Description Single core cables with solid or stranded copper conductors, PVC insulated, rated 450/750V conforming to SASO:55 specification Construction: Conductor Pla , in annealed circular copper conforming to IE , C:228, class 1 and 2 ( also available in aluminum conductors sizes 16 to 630 mm2). Insulation PVC type 5 to BS:6746  , rated 85°C, (PVC type 1 to BS:6746 rated  , 70 °C also available) Application: Typical applica , tions include building wiring, equipment wiri , ng, switching and distribution installations in conduits above or under plaster Features: Insulation adheres tig , htly to conductors yet strips easily, leaving conductor clean. PVC insulation has good electrical properties. Dimensions and Weights Conduct , or Insulation Packaging Cross sectional area Nominal Minimum number of wires Thickness Nominal Overall diameter Approx Net weight Approx B-Box, S-Spool C-Coil, D-Drum m m2   m m m m kg/km m 1.5 re 1 0.7 3.0 19 50/100 B/S 1.5 rm 7 0.7 3.2 19 50/100 B/S 2.5 re 1 0.8 3.6 30 50/100 B/S 2.5 rm 7 0.8 3.8 31 50/100 B/S 4 re 1 0.8 4.1 47 50/100 B/S 4 rm 7 0.8 4.3 48 50/100 B/S 6 re 1 0.8 4.6 66 50/100 B/S 6 rm 7 0.8 4.9 67 50/100 B/S 10 re 1 1.0 5.9 110 50/100 C 10 rm 7 1.0 6.3 113 50/100 C

8000 Series Aluminium Alloy Conductor SER Service Entrance Cable Product Description 8000 series aluminium alloy con , ductor is insulated with black XLPE. The insulated conductors  are cabled together with AL-alloy concentric neutral and fiberglass reinforced polyester tape binder, and oversheathed by grey sunlight resistant PVC. Construction: The stranded compacted 8000 series aluminium alloy conductor is insulated with black XLPE. The insulated conductors are cabled together with AL-alloy concentric neutral and fiberglass reinforced polyester tape binder, and oversheathed by grey sunlight resistant PVC. Application: Mainly used to convey power from the Service drop to the meter base to the distribution board. SEU can also be used in certain branch circuits as permitted by 1999 NEC. It is used in wet or dry locations. Rated Voltage：600V. Operating Temperature: Max permissible continuous operating temperature of conductor shall not exceed 90℃. Standard: UL 44 and UL 854,Federal Specification J-C-30B or other standards required by customers.