Chemical Equipment & Lab Supplies

Vacuum induction melting furnace CY-IM400-L This product is a vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000℃. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition. It is suitable for sample melting and heat treatment, phase diagram research. The equipment adopts high-quality high- frequency induction power supply and supports customized maximum 60KW high- frequency induction power supply. The equipment is equipped with a high-vacuum molecular pump set, which can effectively improve the vacuum degree of the substrate and thus improve the quality of the melting. The equipment is also equipped with a lifting platform and a flip handle to facilitate the operator to carry out the casting and sampling operations after melting. The equipment is comprehensive in function, fast in melting, easy to use, energy- saving and environmentally friendly, and is very suitable for laboratory research on metal samples. Technical parameter ►Inductive power supply Frequency: high frequency power: Customizable, maximum 60KW ►Vacuum chamber Cavity material: stainless steel cooling system: Water-cooled electrode, water-cooled cavity, water-cooled mold Cavity size: φ400mm× 400mm Observation window:main watch window φ120mm, upper watch window φ45mm; Water cooling interface: φ8mm quick plug interface Lifting platform: 0 ~ 40mm lifting range Accessories: Infrared temperature measurement window, Vacuum funnel ►Vacuum system Product model: CY-GZK103-A Pumping interface: CF160 Molecular pump: CY-600 Exhaust interface: KF16 Foreline pump: Rotary vane pump Vacuum measurement: Compound vacuum gauge Ultimate vacuum: 1.0E-5Pa Power supply: AC 220V 50 / 60Hz Pumping rate: Molecular pump: 600L / S; Rotary vane pump: 1.1L / S Comprehensive pumping performance: 20 minutes Vacuum degree: 1.0E-3Pa ►Crucible: Graphite melting crucible: Maximum support φ60mm X 80mm Alumina insulated crucible: Maximum support φ120mm X 90mm ►Other: Supply voltage: AC220V 50Hz or three-phase 380V Overall size: 1505mm X 700mm X 1400mm Total power: Refer to induction power supply Total Weight: 900kg

Minimum Order: 1 bags

Vacuum induction melting furnace CY-IM400-L This product is a vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000℃. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition. It is suitable for sample melting and heat treatment, phase diagram research. The equipment adopts high-quality high- frequency induction power supply and supports customized maximum 60KW high- frequency induction power supply. The equipment is equipped with a high-vacuum molecular pump set, which can effectively improve the vacuum degree of the substrate and thus improve the quality of the melting. The equipment is also equipped with a lifting platform and a flip handle to facilitate the operator to carry out the casting and sampling operations after melting. The equipment is comprehensive in function, fast in melting, easy to use, energy- saving and environmentally friendly, and is very suitable for laboratory research on metal samples. Technical parameter ►Inductive power supply Frequency: high frequency power: Customizable, maximum 60KW ►Vacuum chamber Cavity material: stainless steel cooling system: Water-cooled electrode, water-cooled cavity, water-cooled mold Cavity size: φ400mm× 400mm Observation window:main watch window φ120mm, upper watch window φ45mm; Water cooling interface: φ8mm quick plug interface Lifting platform: 0 ~ 40mm lifting range Accessories: Infrared temperature measurement window, Vacuum funnel ►Vacuum system Product model: CY-GZK103-A Pumping interface: CF160 Molecular pump: CY-600 Exhaust interface: KF16 Foreline pump: Rotary vane pump Vacuum measurement: Compound vacuum gauge Ultimate vacuum: 1.0E-5Pa Power supply: AC 220V 50 / 60Hz Pumping rate: Molecular pump: 600L / S; Rotary vane pump: 1.1L / S Comprehensive pumping performance: 20 minutes Vacuum degree: 1.0E-3Pa ►Crucible: Graphite melting crucible: Maximum support φ60mm X 80mm Alumina insulated crucible: Maximum support φ120mm X 90mm ►Other: Supply voltage: AC220V 50Hz or three-phase 380V Overall size: 1505mm X 700mm X 1400mm Total power: Refer to induction power supply Total Weight: 900kg

Minimum Order: 1 bags

High vacuum induction melting furnace CY-IM325S-G25 1. Overview This product is a vacuum induction furnace, using induction heating, the equipment melting temperature can reach 2000 ℃. It adopts stainless steel chamber and water- cooled die, equipped with a quartz observation window to observe the smelting situation of the sample, which is suitable for the smelting and heat treatment of metal samples, and the phase diagram study. The equipment uses high-quality high- frequency induction power supply with a maximum power of 25KW. The equipment adopts infrared temperature measurement, intelligent temperature controller for temperature control, with over-temperature protection function, which can accurately control the melting temperature. The equipment is equipped with a high-vacuum molecular pump set, which has the advantages of high vacuum, high cleanliness, and fast gas pumping speed, which can effectively improve the melting quality. The equipment is also equipped with a lifting platform and a flip handle, which is convenient for the operator to perform casting and sampling operations after melting. The equipment is also equipped with a pouring device, which can pour the smelted sample into a pre-prepared mold to produce the required sample shape. The equipment has comprehensive functions, fast melting, convenient use, energy saving and environmental protection, and is very suitable for metal sample research in the laboratory. 2. Technical Parameters Model: CY-IM325S-G25 Power requirements Voltage: Three-phase 380V Power: 25KW (European standard) Vacuum chamber Material: 304 stainless steel Structure: cylinder horizontal front door open Size: φ325mm x H330mm Quartz observation window: φ100mm The upper cover is equipped with a feed port Casting system The right side of the chamber is equipped with a pouring device, which can be cast after melting Pouring mold size: φ20mm x 50mm Mold type: water-cooled copper mold Vacuum system Backing pump: Two stage rotary vane pump, pumping speed 1.1L/s Secondary pump: turbo molecular pump Ultimate vacuum: 5x10-4Pa Temperature control system Intelligent temperature control meter temperature control With over-temperature protection Temperature measurement: infrared optical temperature sensor, the maximum measurement temperature is 2100℃ Induction coil: inner diameter 60mm, height 80mm Intake port: φ10 Pagoda Head Gas release valve: Manual gas release valve Cooling system: Integrated water-cooling pipeline design, φ12mm quick plug connector Water chiller: Refrigeration type water chiller, cooling capacity 2.8kW,Flow 3m3/h Dimensions: 1440x700x1240(mm)

Minimum Order: 1 bags

Small vacuum induction furnace CY-IM315-S This product is a small vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000℃. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition. It is suitable for a small amount of sample melting and heat treatment, phase diagram research. The equipment is equipped with a high-vacuum molecular pump set, which can effectively improve the vacuum degree of the substrate and thus improve the quality of the melting. The equipment is also equipped with a lifting platform and a flip handle to facilitate the operator to carry out the casting and sampling operations after melting. The equipment is comprehensive in function, fast in melting, easy to use, energy- saving and environmentally friendly, and is very suitable for laboratory research on small-dose metal samples. Technical parameter ►Inductive power supply Frequency: high frequency power: AC220V 15KW/three-phase 280V 25KW ►Vacuum chamber Cavity material: stainless steel cooling system: Water-cooled electrode, water-cooled cavity, water-cooled mold Cavity size: φ360mm× 350mm Observation window:main watch window φ190mm, upper watch window φ45mm; Mold window:φ80mm Water cooling interface: φ8mm quick plug interface Lifting platform: 0 ~ 40mm lifting range Accessories: Vacuum funnel ►Vacuum system Product model: CY-GZK103-A Pumping interface: CF160 Molecular pump: CY-600 Exhaust interface: KF16 Foreline pump: Rotary vane pump Vacuum measurement: Compound vacuum gauge Ultimate vacuum: 1.0E-5Pa Power supply: AC 220V 50 / 60Hz Pumping rate: Molecular pump: 600L / S; Rotary vane pump: 1.1L / S Comprehensive pumping performance: 20 minutes Vacuum degree: 1.0E-3Pa ►Crucible: Graphite melting crucible: Maximum support φ30mm X 85mm Alumina insulated crucible: Maximum support φ44mm X 90mm ►Other: Supply voltage: AC220V 50Hz or three-phase 380V Overall size: 1000mm X 600mm X 1200mm Total power: 18KW/28KW Total Weight: 600kg

Minimum Order: 1 bags

Small vacuum induction furnace CY-IM315-S This product is a small vacuum induction furnace with induction heating, and the melting temperature of the equipment can reach 2000℃. The induction furnace adopts a stainless steel water-cooled chamber and is equipped with a quartz observation window to observe the sample melting condition. It is suitable for a small amount of sample melting and heat treatment, phase diagram research. The equipment is equipped with a high-vacuum molecular pump set, which can effectively improve the vacuum degree of the substrate and thus improve the quality of the melting. The equipment is also equipped with a lifting platform and a flip handle to facilitate the operator to carry out the casting and sampling operations after melting. The equipment is comprehensive in function, fast in melting, easy to use, energy- saving and environmentally friendly, and is very suitable for laboratory research on small-dose metal samples. Technical parameter ►Inductive power supply Frequency: high frequency power: AC220V 15KW/three-phase 280V 25KW ►Vacuum chamber Cavity material: stainless steel cooling system: Water-cooled electrode, water-cooled cavity, water-cooled mold Cavity size: φ360mm× 350mm Observation window:main watch window φ190mm, upper watch window φ45mm; Mold window:φ80mm Water cooling interface: φ8mm quick plug interface Lifting platform: 0 ~ 40mm lifting range Accessories: Vacuum funnel ►Vacuum system Product model: CY-GZK103-A Pumping interface: CF160 Molecular pump: CY-600 Exhaust interface: KF16 Foreline pump: Rotary vane pump Vacuum measurement: Compound vacuum gauge Ultimate vacuum: 1.0E-5Pa Power supply: AC 220V 50 / 60Hz Pumping rate: Molecular pump: 600L / S; Rotary vane pump: 1.1L / S Comprehensive pumping performance: 20 minutes Vacuum degree: 1.0E-3Pa ►Crucible: Graphite melting crucible: Maximum support φ30mm X 85mm Alumina insulated crucible: Maximum support φ44mm X 90mm ►Other: Supply voltage: AC220V 50Hz or three-phase 380V Overall size: 1000mm X 600mm X 1200mm Total power: 18KW/28KW Total Weight: 600kg

Minimum Order: 1 bags

Stainless steel water-cooled cavity 35KW vacuum induction melting furnace CY-IM300-35A is a vacuum induction furnace, using induction heating, equipment melting temperature can reach 2000 ℃. Adopt stainless steel water-cooled cavity, equipped with quartz observation window to observe sample melting, suitable for metal sample melting and heat treatment, phase diagram study. The equipment uses high-quality high-frequency induction power supply, the largest support for custom 60KW high-frequency induction power supply. The equipment is equipped with a high- vacuum molecular pump set, which can effectively improve the vacuum of the substrate and thereby improve the melting quality. The equipment is also equipped with a lifting platform, a flip handle and a water-cooled copper crucible, which is convenient for the operator to perform casting and sampling operations after melting. The equipment has comprehensive functions, fast melting, easy to use, energy saving and environmental protection, which is very suitable for laboratory research on metal samples. Technical parameter ►Inductive power supply Frequency: high frequency power: 35KW can be customized, the maximum is 60KW ►Vacuum chamber Cavity material: stainless steel cooling system: Water-cooled electrode, water-cooled cavity, water-cooled mold Cavity size: φ300mm X 300mm Observation window Main observation window φ120mm Accessories: Infrared temperature measurement window, vacuum funnel Lifting platform: 0 ~ 40mm lifting range Water cooling interface: φ8mm quick plug interface ►Vacuum system Product model: CY-GZK103-A Pumping interface: CF160 Molecular pump: CY-600 Exhaust interface: KF16 Foreline pump: Rotary vane pump Vacuum measurement: Compound vacuum gauge Ultimate vacuum: 1.0E-5Pa Power supply: AC 220V 50 / 60Hz Pumping rate: Molecular pump: 600L / S Rotary vane pump: 1.1L / S Comprehensive pumping performance: 20 minutes Vacuum degree: 1.0E-3Pa ►Crucible: Graphite melting crucible: Maximum support φ60mm X 80mm Alumina insulated crucible: Maximum support φ120mm X 90mm ►Other: Supply voltage: AC220V 50Hz or three-phase 380V Overall size: 1550mm X 700mm X 1400mm Total power: Reference induction power Total Weight: 900kg

Minimum Order: 1 bags

Key word: Gold melting machine High Frequency gold melting machine Small gold melting machine 8KG Gold melting machine It is mainly through the crucible container to instantaneously induct and heat the precious metal, and then perform smelting, purification, casting and other processes. 1. For precious metals: platinum, palladium, gold, silver, copper, steel, gold powder, sand, and other high melting point metals. 2. The amount of single melting metal is 1-8KG, and the single melting time is 3-5 minutes. 3. The highest furnace temperature can reach 1200-1500℃. 4: Widely used in homes, exhibition halls and laboratories. Technical parameters: Model: DD-25 Maximum oscillation power: 25KVA Input voltage range: Three-phase 380V Input voltage frequency: 50HZ-60HZ Output oscillation frequency: 30KHZ-100KHZ Maximum input current: 23A Heating, heat preservation\cooling time: 1S-99S Temporary load rate: 90% Cooling water flow: Greater than 6L/MIN Cooling water temperature: Less than 45℃ Weight: Host: 29.5Kg

Minimum Order: 1 bags

key word:Gold melting machine /High Frequency gold melting machine/Small gold melting machine/2 KG Gold melting machine It is mainly through the crucible container to instantaneously induct and heat the precious metal, and then perform smelting, purification, casting and other processes. 1. For precious metals: platinum, palladium, gold, silver, copper, steel, gold powder, sand, and other high melting point metals. 2. The amount of single melting metal is 1-2KG, and the single melting time is 3-5 minutes. 3. The highest furnace temperature can reach 1200-1500℃. 4: Widely used in homes, exhibition halls and laboratories. Technical parameters: Model: DD-15 Maximum oscillation power: 15KVA Input voltage range: Single phase 220V Input voltage frequency: 50HZ-60HZ Output oscillation frequency: 30KHZ-100KHZ Maximum input current: 32A Heating, heat preservation\cooling time: 1S-99S Temporary load rate: 90% Cooling water flow: Greater than 6L/MIN Cooling water temperature: Less than 45℃

Minimum Order: 1 bags

CYKY-BTF-500 Vacuum Melt Spinning System/Furnace with Precision Temperature A lab-scale vacuum melt spinning system for preparing amorphous metallic ribbons. In this technique, metal ingots (<50g) are melted via induction heating method and then propelled by over-pressurizing the crucible. Feature: The complete system consists of the stainless steel vacuum chamber, vacuum system, induction heating system, rack system and discharging tubular collector. Copper roller linear speed: 5 ~ 60m / S Melting metallic samples: 5g ~ 50g/Per batch Vacuum casting device (not included in standard configuration) Power supply: Voltage: AC380V, three-phase Maximum power 15kw (60A air switch required) Vacuum chamber & vacuum pump: Vacuum chamber size: Φ 500mm x 400mm L Hinged cavity door with quartz observation window Molecular pump system is installed in the equipment Vacuum: 5 X10 E-5 Torr (within 20 minutes) Limiting vacuum 10e-7 Torr (to be baked) Induction heater & temp Controller: Heating power: 15kw; frequency range: 30 ~ 80kHz Melting sample quantity: 10 - 50g (depending on the material) Accurate temperature control system, B-type thermocouple, 30 temperature rise and fall procedures can be set Temperature control accuracy: + / - 2 ℃ Crucibles:Quartz crucible or BN crucible can be used according to customers' requirements Spinning wheel: Standard copper roller cooling without water Linear speed of copper roller: 5 ~ 60m / S Optional: Optional water-cooled copper roller with a maximum sample handling capacity of 500g Optional vacuum casting module Optional accessories: Casting accessories (casting, spray casting) can be purchased according to requirements The water cooling system can be customized for the casting copper mold according to the requirements        Dimension:2000×11 , 00×1800mm(L×W×H) Weight:~800Kg Certificat , e:CE certificatio

Minimum Order: 1 bags

40kg vacuum indium alloy melting furnace CY-IM600-40GB vacuum indium alloy melting furnace is mainly used for high temperature melting and purification of indium alloy, and realizes the function of oxygen-free environment packaging Product Features 1. Induction coil inductor structure, easy to operate, good power coordination, long life and not easy to deform. 2. Integrated product design, full packaging in an oxygen-free environment 3. Adopt the integrated design of distillation and smelting to realize the dual function of melting and distillation collection 4. Measure the crucible temperature at the bottom of the crucible in real time, and measure the surface temperature of the evaporation and collection surface at the top of the distillation. 5. High vacuum design of smelting furnace stainless steel. Equipment parameters (1) Crucible capacity: 40kg (based on the specific gravity of indium alloy), (2) Maximum working temperature: 1200℃ (3) Power supply capacity: 120-150 Kw (4) Ultimate vacuum: ≤ 5 Pa (after degassing) (5) Vacuum pressure rise rate: ≤4.0 Pa/h (6) Overall dimensions: about 2500×3000×3000 (length×width×height) (7) IF frequency: 1000～4000 Hz (automatic tracking) (8) Intermediate frequency voltage: 375 V (9) Casting method: bottom casting (10) Temperature measurement range: room temperature-1200℃ (11) Temperature measurement method: thermocouple or infrared, according to the needs of the actual part (12) Power supply type: IGBT intermediate frequency power supply (13) Smelting environment: vacuum or inert gas state. (14) Crucible size: Φ180mm * 250 (15) Packing method: casting and packing in the glove box, oxygen-free state throughout the process (16) Glove box size: A. Single-station single-sided operation, size 1220*750*900mm B. Control mode: 7-inch touch screen C. Purification column: single column D. Fan 90m³/h E. Water index <1ppm F. Oxygen index <1ppm

Minimum Order: 1 bags

Tube type hydrogen furnace can be used for pumping vacuum and passing atmosphere, so it is also called vacuum tube furnace and atmosphere tube furnace. The tube is made of a seamless nickel-based alloy that can be used for all inert gases and oxygen to 30 PSI (pounds per square foot).  In order to match the test requirements for the introduction of hydrogen, this tube furnace is equipped with a manual ignition device at the right end of the furnace tube, which can ensure the safety of the test; a vacuum gauge and a air pressure gauge are arranged on the left side of the furnace tube to control the vacuum and atmosphere inside the furnace tube. Further safety of the test is ensured by the interlocking of the solenoid valve and the pressure sensor and the flammable gas detection device. This equipment also includes a two-way float flow meter with a stainless steel needle valve and a air pressure gauge to accurately mix the gas that meets the test requirements. Under normal circumstances, this set of instruments is used with a double stage rotary vane vacuum pump to achieve a general low vacuum test environment. If you need a higher vacuum, you can contact our technicians to select a more powerful molecular pump. Applications:  It is widely used in materials or chemical laboratories to sinter various new material samples in a hydrogen or hydrogen-nitrogen mixed gas state. Technical parameter supply voltage：AC220V, 50Hz maximum power：2.5KW heating zone：440mm operating temperature：1100℃(1200℃<1h) temperatur , e control accuracy：+-1℃ heating rate：Recommended≤10℃/min temperature control： AI-PID 30-stage process curve, can store multiple curves. Independent control of three temperature zones with overheating and open circuit protection Furnace tube size：φ100mm O.D×1000mm L Furnace tube material：High purity quartz

Minimum Order: 1 bags

Vertical fluidized bed tube furnace CY-T1700-100I-T-V The CY-T1700-100I-TV is a fluidized bed vertical CVD system specially designed for powder experiments. The tube is a high-purity corundum tube with a microporous ceramic plate embedded inside the furnace tube. The powder can be placed on the microporous ceramic plate, gas is introduced from the lower end of the furnace tube, and the sample powder was suspended in the heating zone through a microporous ceramic plate to carry out an experiment. The instrument adopts advanced PID intelligent temperature control, and the temperature control accuracy is ±1℃. The control interface is a 7-inch high-definition true color LCD touch screen, graphic display, visual operation interface, easy to operate and intuitive to use, can greatly improve your experimental efficiency. Application range: It is mainly used in powder experiments. Technical parameters: Model: CY-T1700-100I-T-V Furnace tube material: High purity alumina Furnace tube diameter: 100mm Furnace tube length: 1200mm Furnace chamber length: 900mm Heating zone length: 600mm Constant temperature zone: 300mm Operating temperature: ≤1700℃ Temperature control accuracy: ±1℃ Temperature control mode: 30 or 50 segment program temperature control Display mode: LCD touch screen Sealing method: 304 stainless steel vacuum flange Flange interface: 1/4" ferrule connector (Ø8 pagoda-shape connector); KF16 vacuum port Vacuum: 4.4E-3Pa Power supply: AC:220V 50/60Hz Rated power: 10KW

Minimum Order: 1 bags

RTP rapid annealing furnace This product is a rapid annealing furnace, heated by the halogen lamp, and can be used for rapid thermal annealing, rapid thermal oxidation, rapid thermal nitriding, silicidation, diffusion, compound semiconductor annealing, annealing after ion implantation, electrode alloying, crystallization and Densification, alloy melting point analysis, film deposition, etc. The equipment is mainly composed of quartz vacuum chamber, vacuum pump unit, water cooling unit and control system. The control system adopts intelligent temperature control meter control and touch screen operation. Its digital parameter interface and automatic operation mode provide users with an excellent research and development platform. The furnace chamber uses a left-right sliding way, and the distance from the sample is flexibly adjustable. The equipment is equipped with a bipolar rotary vane pump, which has the advantages of small size, low noise, and no oil pollution. Technical parameters: Model: CY-O1000-100I-T-RTP Furnace tube specifications: Inner diameter 100mm, heating temperature zone 400mm, total length 550mm Material: high purity quartz Heating rate: 0-200℃/s Cooling rate: Above 200℃≤25min Heating element: Halogen lamp Vacuum interface: KF16 Intake port: Pagoda head, with 10mm outer diameter air hose Flange specification : φ100 stainless steel vacuum method water cooling flange Water cooling interface: φ10mm quick plug connector Vacuum system: Bipolar rotary vane pump, pumping speed 1.1L/s Ultimate vacuum: 10-1Pa Temperature control System: Intelligent temperature control meter temperature control With over-temperature protection Temperature measurement: K-type thermocouple Water chiller: Water tank capacity 9L, Max. lift head 10m Intake port: φ10 Pagoda Head Air release valve: Manual air release valve Power requirements: 220V 50Hz, 24kW Dimensions: 1200mm x 500mm x 480mm

Minimum Order: 1 bags

CY-O1200-60II IT-MB Double temperature tube furnace with magnetic push rod The dual-temperature zone tube furnace is equipped with a magnetic push rod, which has an exquisite structure and high reliability, and can perform displacement operation on the sample in the tube while keeping the furnace tube vacuum tight. Combined with separate temperature control in dual temperature zones, it can realize a variety of heat treatment processes for users and is an ideal equipment for material research and material processing. Technical parameter Supply voltage: AC220V, 50Hz Maximum power: 4KW Heating rate: Maximum 20℃/min, recommended ≤10℃/min Operating temperature: Maximum temperature≤1200℃; continuous working temperature≤1150℃ Heating temperature zone: Dual temperature zone 200mm+200mm Furnace tube parameters: Length 1000mm O.D 60mm I.D 57mm Temperature control: PID temperature control accuracy ±1℃ Thermocouple: K type thermocouple Temperature control method: Separate temperature control in dual temperature zones AI-PID 30-segment process curve, can store multiple With overheating and broken couple protection Furnace material: High purity alumina furnace Vacuum interface: KF16 Air inlet: 6.35 Card sleeve connector Magnetic putter: Moveable length 500mm Can shift samples in two temperature zones To meet customer's heat treatment process,Using magnetic coupling connection,Can ensure the vacuum of the furnace tube while pushing the sample Dimensions: 1300mm X 420mm X 550mm

Minimum Order: 1 bags