Chemicals & Plastics

cas: 131-27-1 Molecular Formula:C10H9NO6S2 Molecular weight:303.31 Appearance: Grey or slightly reddish powder Amino Value: ≥70% Purity of amino C acid: ≥97% Water insoluble substance: ≤0.40%

ATP's Medical Equipment and Microbial-resistance cable Jacket" passed ISO10993 "bio-compatibility" test (authoritative verification report attached ); Pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH，1000Hrs) test;" V0 grade material passed biological compatibility certification by Suzhou University; excellent resistance to hydrolysis, alcohol, chemical solvent, and low temperature; soft and smooth touch, matte surface; extrusion speed≥60M/min. The polymer production for Wire for Medical Instruments markets. Technical Data of Medical Equipment & Microbial-resistance Cable Jacket TPU Technical Data Sheet Model Model Material Properties Test Standard Test Condition Unit 1182F- EMS-1219S 1185D-ENB-1414S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - Extrusion/Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 84 85 Proportion ISO 1183 - g/cm³ 1.083 1.185 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 4.6 9.6 Brittle Temperature ISO 812 - ℃ Mechanical Properties Elongation ISO37:2017 200mm/min % 465 492 Tensile Strength ISO37:2017 200mm/min Mpa 29.5 26.1 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As a professional polymer compound manufacturer, we provide tpe elastomer, atp material, antimicrobial tpu, tpu cable jacket and etc. For more information, please feel free to contact us!

Minimum Order: 500

ATP's TPE plastic thermoplastic elastomer series 1. Authoritative certification: passed ISO10993 "bio-compatibility" test; 2. Safety and reliability: Pass a series of comprehensive tests: alcohol resistance, microbial resistance, acid and alkali resistance, hydrolysis resistance (85℃&85%RH，1000Hrs) test; 3. Gentle touch: Compared with TPU cable sheath, TPEs cable sheath presents a softer touch; 4. High-cost performance ratio: low density (≤0.95), high processing efficiency, the best solution for discarded medical cable sheath. Technical Data of Medical Equipment Cable Jacket TPEs Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 2560F- ESU-2514S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 55 Proportion ISO 1183 - g/cm³ 0.939 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 0.7 Brittle Temperature ISO 812 - ℃ Mechanical Properties Elongation ISO37:2017 200mm/min % 424 Tensile Strength ISO37:2017 200mm/min Mpa 5.24 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As a professional polymer compound manufacturer, we provide tpe elastomer, atp material, tpe plastic material, tpe cable jacket etc. For tpe plastic meaning or more information, please feel free to contact us!

Minimum Order: 500

UEN-M Series Matte TPU Applied Fields: High-end market TPU wire & cable products with fine, homogeneous matte surface effect. Characteristics: Fine, homogeneous matte surface effect; slim and soft-touch rubber feel. Applicable fields: 1. All kinds of cables and optical cables with matte and matte characteristics are required for the outer quilt; 2. The outer quilt of various cables that can pass the CSA FT-2 horizontal combustion test. Product features: 1. Even, delicate, soft, and smooth matte and matte appearance; 2. Excellent mechanical properties, elasticity and wear resistance; 3. Processing characteristics: excellent processing efficiency and processing performance, the production efficiency of 60-100 meters per minute can be achieved by using the same PVC screw machine, and there is very little deterioration such as drooling, particles, bulging, and pitting during processing. Product commonality: 1. Environmental performance: fully meet the requirements of internationally accepted environmental protection directives such as RoHS (REV.2.0), REACH regulations, SVHC substances, and GP; 2.Environmental resistance characteristics: According to the application requirements of customers, anti-UV, anti-static, and other characteristics can be added without changing their basic performance. 3.Technical Data of Matte Surface TPU 4.Technical Data Sheet 5.Model 6. 7.Material Properties 8.Test Standard 9.Test Condition 10.Unit 11.1185F-EMS-1546T 12.General Characteristics 13.Material Category 14.- 15.- 16.- 17. 18.Appearance(Light/Semi-matte/Frosted) 19.- 20.- 21.- 22. 23.Extrusion/Injection 24.- 25.- 26.- 27. 28.Physical Characteristics 29.Hardness 30.ISO 48 31.15S 32.Shore A 33.83 34.Proportion 35.ISO 1183 36.- 37.g/cm³ 38.1.079 39.Melt Index 40.ISO 1133-1:2011 41.190℃/2.16kg 42.g/10min 43.5.1 44.Brittle Temperature 45.ISO 812 46.- 47.℃ 48. 49.Mechanical Properties 50.Elongation 51.ISO37:2017 52.200mm/min 53.% 54.489 55.Tensile Strength 56.ISO37:2017 57.200mm/min 58.Mpa 59.26.1 60.Tearing Strength 61.ISO34-1:2015 62.500mm/min 63.KN/m 64. 65.Hot Air Aging 66.Elongation Retention Rate 67.ISO37:2017 68.- 69.% 70. 71.Tensile Strength Retention Rate 72.ISO37:2017 73.- 74.% 75. 76.Electrical Performance 77.Volume Resistivity 78.ASTM D257 79.- 80.Ohm-cm 81. 82.Permittivity 83.ASTM D150 84.- 85.- 86. 87.Combustion Performance 88.Vertical Burning Test 89.UL 94 90.3.0/6.0mm 91.- 92. 93.Oxygen Index 94.ASTM D2863 95.- 96.% 97. 98.Feature 99. As a professional polymer compound manufacturer, we provide tpe elastomer, tpe elastomero termoplastico, tpu thermoplastic polyurethane resin, thermoplastic polyurethane resin, tpu resin and etc. For more information, please feel free to contact us!

Minimum Order: 500

ATP starts the LSZH compound ( LSOH material ) research and development for various applications such Rail Transit, Architecture&Home Decoration, data communication, based on the CRP (European Construction Products Regulation) requirement from 2017; ATP's low smoke zero halogen materials support the wire and cables to pass the CPR EN50575 grade (B2ca, Cca, Dca, Eca) burning test; The LSZH jacket material has a higher flame retardant grade and drop test grade, and still has excellent processing characteristics and quality under the condition of high flame retardant performance; ATP's High Voltage LSOH LSZH Cable Jacket Material Solution, Fully meets the low friction LSZH requirements of temperature resistance, flame retardant, and other indicators of high-voltage wire harness passing ISO 6722 125 ℃ and ISO6722 125℃ tests. Low Smoke Zero Halogen Material By Processing ATP's low smoke zero halogen material with good process-ability, fully meet the requirements of high-speed extruding, line diameter rounded and stable, less salivation(less die stock), good color stability, and higher yield rate. Low Smoke Zero Halogen Material by Characteristics LSZH compound is a kind of cable sheathing material that has been widely used in the world. The urgent need of cable manufacturers is to provide better scale processing and better prices while meeting the basic safety performance, flame retardant performance, mechanical strength, and reliability. ATP's Defender-N™ LSZH jacket material product is a cost-effective low friction LSZH material developed for this customer's needs. Low Smoke Zero Halogen Material By Crosslinking Modes After the low-smoke zero halogen flame retardant compound polyolefin cable material is cross-linked, it can improve the mechanical properties, heat resistance, environmental stress cracking resistance, and other properties of the material, broaden the application scope of the material, and improve the reliability and life of the material according to low smoke zero halogen regulations. As one of the most professional plastic compounding companies, we provide lszh lsoh, low smoke zero halogen lszh, low smoke zero halogen heat shrink, thermoplastic compound, tpe elastomero termoplastico and etc. For what is lszh or more information, please feel free to contact us!

Minimum Order: 500

The modification of ATP for polyolefin elastomers mainly reflects the following technical characteristics: 1. Improved Low-temperature Resistance In the application of cable insulant, the modification TPO of ATP can not only meet the requirement of electric performance from the insulant but also display a more broad temperature resistant character——displaying excellent mechanical properties and aging properties at the test temperature of -50℃—+125℃. So, this is the optimized insulant for wires and cables which have special requirements for low-temperature resistance. 2. Improved shrinkage resistance The jacket made up of TPO wire and cable insulant from ATP keeps its section surface smooth and orderly with little retraction rate after immersing in solder machine （350℃/2”）. In the application of high-temperature-resistant cables (temperature≤125℃) such as charging vehicle cables (EV Cable), equipment connection cables, etc., the jacket made up of TPO wire and cable insulant from ATP takes the place of XLPE materials to meet the requirements of insulant high-temperature aging and shrinkage for nominal cables. And this can simplify the processing procedures by a large margin and improve the processing efficiency and yield. Application: TPO has the characteristics of small specific gravity, good impact strength, and low-temperature brittleness, and is suitable for applications in the cable industry. Technical Data of Low Temperature-resistance TPO Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 2895F- ESS-1008S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 97 Proportion ISO 1183 - g/cm³ 0.93 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 1.7 Brittle Temperature ISO 812 - ℃ Mechanical Properties Elongation ISO37:2017 200mm/min % 590 Tensile Strength ISO37:2017 200mm/min Mpa 33.367 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As one of the most professional polymer compounding companies, we provide polymer compound, tpo polyolefin, polymer thermoplastic, tpe elastomero termoplastico and etc. For more information, please feel free to contact us!

Minimum Order: 500

By cooperating with the injection grade TPU with molding ability and excellent sealing characteristics, entire product solution could be formed fast. Technical Data of Injection Molding TPU Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 1182B- RSS-1531S 1182B-RSS-1531S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Mechanical Properties Elongation ISO37:2017 200mm/min % 518 462 Tensile Strength ISO37:2017 200mm/min Mpa 18.5 36.951 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As a thermoplastic elastomer company, we provide atp polymer, tpu material injection molding, thermoplastic polyurethane injection molding, welding tpu, tpu moulding, tpu injection, tpu overmolding, polymer compound, tpe elastomero termoplastico and etc. For more information about tpu injection molding temperature and tpu injection molding process, please feel free to contact us!

Minimum Order: 500

Injection-grade TPE Products Characterization: High fluidity. Soft-touch. Overmolding compatibility with TPE/PP/PE cable. Application TPE wire sheaths. Overmolding PP/PE. Stationery. Tool grip. Sporting equipment TPE injection guidance 1. Previous drying of the product 2 hours at 80℃ 2. Medium injection pressure & speed 3.Typical barrel temperature suggested C1 C1 C3 NOZZLE MOLD 170-190 ℃ 180-200 ℃ 190-210 ℃ 190-210 ℃ 30-60 ℃ Technical Data of Injection Molding TPEs Technical Data Sheet Model Material Properties Test Standard Test Condition Unit 2575F- RSS-1006S General Characteristics Material Category - - - Appearance(Light/Semi-matte/Frosted) - - - Extrusion/Injection - - - Physical Characteristics Hardness ISO 48 15S Shore A 75 Proportion ISO 1183 - g/cm³ 0.963 Melt Index ISO 1133-1:2011 190℃/2.16kg g/10min 64.2 Brittle Temperature ISO 812 - ℃ Mechanical Properties Elongation ISO37:2017 200mm/min % 450 Tensile Strength ISO37:2017 200mm/min Mpa 6.65 Tearing Strength ISO34-1:2015 500mm/min KN/m Hot Air Aging Elongation Retention Rate ISO37:2017 - % Tensile Strength Retention Rate ISO37:2017 - % Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm Permittivity ASTM D150 - - Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm - Oxygen Index ASTM D2863 - % Feature As one of the most plastic compound suppliers, we provide tpu material injection molding, thermoplastic compound, atp polymer, tpe elastomero termoplastico and etc. For more information about tpe manufacturing process and tpe process, please feel free to contact us!

Minimum Order: 500

CAS: 79-31-2 Product Description Product Name: ISOBUTYRIC ACID Synonyms: 2-Methylpropanoic acid 79-31-2 Isobutanoic acid 2-Methylpropionic acid CAS: 79-31-2 Molecular Formula: (CH3)2CHCOOH Molecular Weight: 88.11 Property: Boiling point: 152-155°C Melting point: -47°C Relative density (water = 1): 0.95 Solubility in water, g/100ml at 20°C: 20 Vapour pressure, kPa at 14.7°C: 0.13 Relative vapour density (air = 1): 3.0 Flash point: 56°C c.c. Auto-ignition temperature: 481°C Explosive limits, vol% in air: 2-9 Octanol/water partition coefficient as log Pow: 0.88 Specification: Appearance Colorless and transparent oily liquid Purity (%) ≥99 Accidity (HCL) (mgKOH/g) ≤0.1 Water content (%) ≤0.1 Applications: ● Agriculture intermediates ● Dyes / pigments / paints ● Food flavors & food fragrances ● Fragrance ingredients ● Herbicides - intermediate for other ● Intermediates ● Other-food chemicals ● Pharmaceutical chemicals ● Protective coatings Package: This product is packed in IBC or ISO tank. The net weight is 900kg/IBC. Storage: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat/sparks/open flames/ hot surfaces. Store away from incompatible materials and foodstuff containers. Please contact us if you are interested!

Minimum Order: 1 bags

CAS: 1965-09-9 Product Description https://www.yufenggp.com/products/4 , -4--oxydiphenol.html Product Name: 4,4'-Oxydiphenol Synonyms: 4,4&# , 39;-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-hyd , roxyphenyl) Ether DHDE 1965-09-9 Phenol, 4,4'-oxybis- 4-(4-hydroxyphenoxy)phenol , CAS: 1965-09-9 Molecular Formula: C12H10O3 Molecular Weight: 202.21 Properties Density 1.3±0.1 g/cm3 Boiling Point 379.2±27.0 °C at 760 mmHg Melting Point 163-168 °C Molecular Formula C12H10O3 Molecular Weight 202.206 Flash Point 183.2±23.7 °C Exact Mass 202.062988 PSA 49.69000 LogP 2.50 Vapour Pressure 0.0±0.9 mmHg at 25°C Index of Refraction 1.639 Specifications: Appearance White and crystalline powder Specific Gravity 1.208-1.222g/cm3 Purity (%) ≥99 Water content (%) ≤0.2 Melting point (°C)              165°C -168°C Appli , cations: 1. Used as pharmaceutical intermediates, liquid crystal additives. 2. Used to produce ethoxyilne resin. Package: Net 25kg/drum Storage: Keep containers tightly closed in a dry, cool and well-ventilated place. Keep away from heat/sparks/open flames/ hot surfaces. Store away from incompatible materials and foodstuff containers.

Minimum Order: 1 bags

CAS No.: 79-34-5 Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34- , 5 s-Tetrachloroethane Acetylene tetrachloride Ethane, 1,1,2,2-tetrachloro- Tetrachloroethane < , br> CAS No.: 79-34-5 Molecular Formula: C2H2Cl4 Molecular Weight: 167.84 Property: This product is also known as sym-tetrachloroethane, it is non-flammable and non-explosive, colorless and transparent liquid. Its melting point is -44℃ （-36℃）, the boiling point is 146.5℃. Its relative density is 1.58658g/cm3 at 62 °C (45mm Hg) and refractive index is 1.49418 (25/4℃). It is miscible with ethanol, methanol, chloroform, benzene, carbon tetrachloride, carbon disulfide, benzene, dimethyl amide and oil while it is difficultly soluble in water. The product will volatile with water steam. It has chloroform smell. The impure product is readily to decompose to yield hydrogen chloride and trichloro ethylene while the pure product is stable. The product is acid stable but readily to decompose to yield trichloro ethylene in the existence of alkali. Specification: Appearance Colorless and transparent liquid Specific Gravity 1.590-1.598g/cm3 Purity ≥ 99% Moisture ≤ 0.09% Acidity（HCL） ≤ 0.3% Applications: This product is an efficient solvent, used as solvents for medicine, shellac, resin, wax, also used as aircraft wing coating detergents, coatings removing agent, herbicides, alcohol denaturant, pesticides, metals cleaning agent, etc., intermediates of trichloro ethylene, tetrachloro ethylene, pentachloroethane and carbon hexachloride Package and storage: This product is contained in drums with capacity of 200 liters. The net weight of each drum is 300 kg, stored in a cool dry place with good ventilation. More information please click here.

CAS: 79-38-9 Product Description Synonyms: CHLOROTRIFLUOR , OETHYLENE 79-38-9 CTFE Chloro , trifluoroethene 1-Chloro-1,2,2-trifluoroeth , ene Daiflon Molecular Formula: C2ClF3 Molecular Weight: 116.47 Properties: Molar mass: 116.469 g/mol Boiling point: 80.24°F (26.8°C) Density: 1.54 g/cm³ Formula: C2ClF3 Solubility: soluble in benzene, chloroform Explosive limits: 24-40.3% Hazard statements: H220, H280, H301, H331 Specifications: Items Standard Appearance Colorless and odorless gas Purity (%) ≥99.96 R1122+R1123 (%) ≤0.006 R1122 (%) ≤0.003 R1123(%) ≤0.003 Dimer ≤0.003 Methyl Alcohol ≤0.002 Other organic impurities ≤0.002 Acidity (ppm wt) ≤5 Moisture (ppm) ≤20 Peroxides n.d Oxygen (ppm) ≤50 Non condensable gas (%vol) ≤5.0 Applications: Chlorotrifluoroethy , lene (CTFE) is a chlorofluorocarbon with chemical formula CFCl=CF2. It is commonly used as a refrigerant in cryogenic applications. CTFE has a carbon-carbon double bond and so can be polymerized to form polychlorotrifluoroethylene or copolymerized to produce the plastic ECTFE. Package: Packed in cylinder (1ton per cylinder) Storage: 1. Keep containers tightly closed. 2. Keep containers in a dry, cool and well-ventilated place. 3. Keep away from heat/sparks/open flames/ hot surfaces. 4.Store away from incompatible materials and foodstuff containers.

Minimum Order: 1 bags

CAS: 79-00-5 Product Description Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-Trichloroethane Molecular Formula: C2H3Cl3 Molecular Weight: 133.40 1,1,2-Trichloroethane Property: 1,1,2-Trichloroethane is non-flammable, colorless liquid which has chloroform odor. It is readily to yield hydrochloric acid gas at high temperature. It is narcotic, and can cause liver dysfunction. Its acceptable concentration is 200×10-6 in the air. The relative density is 1.441-1.443g/cm3 (20℃), the refractive index is 1.4711. Its melting point is -39.7℃. The boiling point of pure product is 113.5℃. The 1,1,2-Trichloroethane is insoluble in water but soluble in alcohol, ether and other organic solvents. 1,1,2-Trichloroethane Specification:   High Grade   First Grade Appearance Colorless and transparent liquid with pungent smell   Specific Gravity 1.4386-1.4446g/cm3 Purity ≥99.5% Chloride ≤0.02% non-volatile matter ≤0.05%   1,1,2-Trichloroethane Applications Used as the raw material of polyvinylidene chloride, the intermediate of resin; Used as solvents for agricultural fumigant, pesticides, grease, wax, rubber, cellulose acetate; Used as extractant of dyes and fragrances. 1,1,2-Trichloroethane Package: This product is contained in plastic cask with capacity of 200 liters. The net weight of each cask is 250 kg, stored in a cool dry place with good ventilation. Contact us to discuss pricing and ordering details.

Minimum Order: 1 bags

WhatsApp: +8617103183983 Email address: betty@qianchengliye.com We are Qiancheng Liye Co., Ltd., we are a professional manufacturer of pharmaceutical intermediates, we have many popular products, we accept OEM, you can customize your own logo. We can send free samples for you, please add my WhatsApp for your detailed quotation for specific details. We have customers in many European and American countries. It is very popular with many customers. And our price is very good, if you are interested, please feel free to contact me, thank you! Looking forward to our cooperation!

Minimum Order: 100