Construction & Real Estate

GFS bolted tank is made of glass fused to steel plate, special sealing material, self-locking screw and other materials. The thickness of enamel steel plate can reach to 20 mm, the most used steel plate thickness is 3~10 mm, steel plate has surface oil, contain rust, contain oxide skin, after shot blasting, sand and other pretreatment process, the steel plate surface will be clean. After 900 ºChigh temperature second enamelingl in electric furnace ,0.3 mm enamel coating is applied on both sides of steel plate. strong binding force between enamel coating and steel plate. Enamel coating can not only prevent tank corrosion, but also has the function of strong acid and alkali resistance. And has extremely strong wear resistance. Advantages of Glass Fused to Steel Sewage Collection Tank Compared with concrete or carbon steel welded tanks, the advantages of GFS Steel bolted tanks are listed below: Low Cost The installation, disassembly, migration, and resettlement of GFS bolted Tanks are convenient and fast, and do not require a large amount of labor and large installation equipment. The quality is stable and the corrosion resistance is excellent, so the maintenance cost is very low. Carbon steel welded tanks and concrete tanks are installed on-site and usually involve sealing and waterproofing, long installation intervals, and the installation process are easily delayed due to bad weather (such as rain or wind), resulting in high installation costs. In some cities, there may be restrictions on the use of sealants, resulting in delays or high installation costs. GFS tanks are more convenient and environmentally friendly without on-site finishing.

Glass-fused-to-steel Tank refer to glass-lined storage tanks, also known as some GFS storage tanks. Glass is melted with steel to enhance its performance. Fusion is important because it is single steel, and it is the same for the environment. When the fusion of steel and glass is completed, the strength increases and the wear resistance decreases, as does the suitable pH value scaffold for alkaline solution. Such ponds are generally considered to be one of the important components of environmental technologies, such as anaerobic digestion tanks, wastewater treatment and fireproof storage. They are industrial water storage tanks. The glass fused on the stainless steel tank panel is coated with glass enamel inside and outside. The enamel has a strong, bright, smooth silicate coating. Advantages of our Sludge Storage Tank 1. Short construction period and low cost. 2. Excellent corrosion resistance, service life> 30 years. 3. Easy to install, no need for large-scale installation equipment or very skilled worker. 4. The tank volume can be expanded according to your requirements. 5. Removable, relocated and reinstalled. 6. Exquisite appearance, the color of the tank can be customized. 7. Modular operation, on-site assembly.

GFS bolted tank is made of glass fused to steel plate, special sealing material, self-locking screw and other materials. The thickness of enamel steel plate can reach to 20 mm, the most used steel plate thickness is 3~10 mm, steel plate has surface oil, contain rust, contain oxide skin, after shot blasting, sand and other pretreatment process, the steel plate surface will be clean. After 900 ºChigh temperature second enamelingl in electric furnace, 0.3 mm enamel coating is applied on both sides of steel plate. strong binding force between enamel coating and steel plate. Enamel coating can not only prevent tank corrosion, but also has the function of strong acid and alkali resistance. And has extremely strong wear resistance

GLASS LINED TO STEEL TANK is assembled on-site from special enamel steel plates, stirrups, self-locking bolts, sealants and other accessories. The raw material of the steel plate is a titanium-containing enamel hot-rolled plate developed in cooperation with domestic first-tier steel companies, which is formed using fast and low-cost on-site assembly technology. After the enameled steel plate is fired at a high temperature of 820°-930°, the enamel will fuse with the surface of the steel plate to form a strong and chemically inert inorganic coating with excellent corrosion resistance. The enamel process is currently the most advanced coating anti-corrosion technology in the steel storage tank market. Glass Lined Steel Tank Advantages Short construction period, cost-effective tank solution Superior corrosion resistance, service life is more than 30 years Easy to install, no need for big installation equipment and/or very skilled labor, the quality is highly guaranteed. Tank volume can be easily expanded or can be dismantled, removed, and relocated Elegant appearance, tank color can be customized

Marble Finish SPC Floor Tiles Luxury Marble Look Without the Stone Maintenance ZORUNHOT's marble finish SPC floor tiles deliver the visual impact of natural marble — veining detail, high-gloss or satin surface options, and consistent large-format tile sizing — for hotel lobbies, retail flagship stores, and feature areas where design impact matters, without the cost, weight, and ongoing maintenance burden of natural stone. Each tile is digitally printed with marble veining patterns before the wear layer is applied, giving designers a way to specify a high-end look across large floor areas without the seam and color-matching constraints of natural stone slabs.   Why Specify Marble-Look SPC Over Natural Stone No acid etching or resealing: natural marble requires periodic sealing and is vulnerable to etching from acidic spills (wine, citrus, cleaning products); the SPC surface coating resists staining without this maintenance cycle Consistent veining across large areas: natural marble slabs vary batch to batch, making large-area color matching difficult and expensive; printed veining patterns stay consistent across the full order quantity Lighter weight, simpler installation: SPC tiles install via floating click-lock without the structural load considerations or specialist installation crews that natural stone slabs require Lower landed cost for large-format projects: for hotel and retail projects covering large floor areas, marble-look SPC significantly reduces material and installation cost versus natural stone while preserving the intended design aesthetic  Designed to Hold Up Under Hospitality and Retail Traffic Because the core contains no organic material, the tile is 100% waterproof and resists warping in lobby entryways exposed to weather-related moisture and frequent cleaning. The double-layer UV coating resists staining and scuffing from rolling luggage carts and high foot traffic, while preserving the printed veining detail's appearance over time better than a polished natural stone surface, which can show wear patterns and lose its sheen in high-traffic zones. The same coating resists surface burns from contact with lit cigarettes without scorching the wear layer.

Vinyl Enhanced SPC Floor Tiles Vinyl Enhanced SPC Floor Tiles Commercial-Grade Durability for High-Traffic Spaces ZORUNHOT's vinyl enhanced SPC floor tiles are built for spaces that see constant footfall and equipment movement — airport terminals, shopping malls, schools, and retail corridors where standard residential-grade flooring wears out fast. The enhanced vinyl wear layer adds an extra level of scratch and abrasion resistance on top of the standard SPC structure, extending service life in environments where flooring gets replaced on a tight maintenance budget cycle. For distributors and contractors supplying commercial fit-outs, this product line is positioned for bulk specification on projects where durability under heavy use is the deciding factor.   Built for Where Standard Flooring Wears Out Fast High-footfall durability: the enhanced wear layer resists scuffing and surface dulling from rolling luggage carts, foot traffic, and equipment wheels — relevant for airport terminals and shopping mall corridors Heat exposure tolerance: the surface coating resists localized heat exposure from sources like dropped cigarettes without scorching, useful in transit hubs and outdoor-adjacent commercial entries Consistent batch quality for large projects: produced on automated lines for tile-to-tile color and texture consistency, which matters when ordering enough volume to cover an airport concourse or multi-floor retail space Click-lock floating installation: faster turnaround for large commercial floor areas compared to glue-down alternatives, reducing project downtime Engineered for Volume Procurement The enhanced vinyl surface uses a double-layer UV coating that resists staining from commercial cleaning chemicals and high-frequency mopping, common in transit hubs and retail environments with strict cleaning schedules. Since the core contains no organic material, the tile remains 100% waterproof and resists warping from spills, weather-related entry moisture, or cleaning crew washdowns — a relevant factor for entryway and corridor specifications.   Applications Commercia , l: Airport terminals, shopping malls, retail corridors, schools and education facilities, offices, and other high-footfall public spaces where flooring needs to withstand continuous traffic between renovation cycles. Residential: Entryways, living areas, and other rooms where households want commercial-grade wear resistance in a residential setting.

Ceramic Finish SPC Floor Tiles Real Tile Look Without the Installation Hassle ZORUNHOT's ceramic finish SPC floor tiles replicate the look of porcelain and ceramic tile — sharp grout-line detailing, matte or satin surface texture, and consistent tile-to-tile pattern repeat — while removing the installation downsides that come with real ceramic: no thinset mortar, no grout maintenance, no cold underfoot feel, and significantly less risk of cracking under impact. The tiles click-lock into place as a floating floor and can often be installed directly over existing ceramic or porcelain tile, making them a practical renovation option for projects on a tight timeline.   Why Choose Ceramic-Look SPC Over Real Tile No grout to maintain: the embossed grout-line pattern is printed and sealed into the surface, so there's no porous grout to stain, discolor, or require periodic resealing Warmer underfoot: the SPC core and IXPE underlayer insulate better than cold ceramic or porcelain, which matters in bathrooms and kitchens used barefoot Lower breakage risk: unlike rigid ceramic tile, SPC tiles flex slightly under impact rather than cracking or chipping, reducing replacement costs in high- traffic commercial areas Faster installation: floating click-lock installation skips the mortar curing time required for real tile, shortening project timelines — a relevant factor for hotel and retail fit-outs working to a fixed opening date  Built to Handle What Bathrooms and Kitchens Throw at It Because the core contains no organic material, the tile is 100% waterproof and won't swell or delaminate from standing water or steam exposure — a common failure point for cheaper laminate alternatives that mimic tile. The double- layer UV coating resists staining from cooking spills and bathroom products, and cleans with standard mopping rather than specialized tile sealants. The same coating resists surface burns from contact with lit cigarettes without scorching the wear layer, which matters in commercial common areas.   Applications Residential: Kitc , hens, bathrooms, laundry rooms, entryways — anywhere homeowners want a tile look without the cold feel or grout upkeep. Commercial: Retail stores, restaurant front-of-house areas, hotel bathrooms and corridors, healthcare facilities, and classrooms where a tile aesthetic is specified but faster installation and lower long-term maintenance are priorities.

Waterproof SPC Floor Tiles with Rigid Core R10 Slip Resistance & OEM Supply ZORUNHOT's rigid core SPC floor tiles are engineered for environments where waterproof performance and structural stability matter most — wet commercial zones, high-traffic public areas, and renovation projects where subfloor imperfections need to be absorbed without cracking. Unlike standard flexible SPC planks, the rigid core construction resists indentation and dimensional movement under heavy loads, while delivering 100% waterproof performance and an R10 slip resistance rating for safer footing in damp conditions.  What Makes Rigid Core Construction Different The rigid core layer is built from a dense calcium carbonate (limestone) and PVC composite, giving the tile significantly higher compressive strength and dimensional stability compared to standard flexible SPC or WPC flooring. This matters for two practical reasons: Indentation & impact resistance: the rigid core resists denting under furniture legs, rolling carts, and heavy foot traffic — making it suitable for retail stores, offices, and healthcare corridors Subfloor tolerance: the rigid structure bridges minor subfloor unevenness better than thinner flexible planks, reducing the need for extensive subfloor leveling before installation   100% Waterproof Performance with R10 Slip Resistance Because the core contains no wood fiber or organic material, the tile will not swell, warp, or delaminate when exposed to standing water — making it suitable for bathrooms, kitchens, laundry rooms, and commercial wet zones such as hotel back-of-house areas and healthcare washrooms. The surface carries an R10 slip resistance rating, suitable for areas where footing safety is a project requirement.

SPC Stone Crystal Flooring Manufacturer OEM & Bulk Supply from China ZORUNHOT is a China-based SPC stone crystal flooring manufacturer supplying wholesalers, distributors, and project contractors worldwide. Our stone crystal surface SPC flooring combines a 100% waterproof rigid core with a high- density wear layer, engineered for hotels, offices, shopping malls, and other high-traffic commercial spaces. OEM customization, private labeling, and bulk container orders are supported for import & export buyers.   OEM & ODM Services for SPC Stone Crystal Flooring ZORUNHOT supports OEM and ODM cooperation for distributors, flooring brands, and project buyers who require customized surface patterns, packaging, or private branding. Typical OEM customization options include: Surface design: stone pattern, crystal finish, marble texture, wood grain, or custom embossing per buyer-supplied design files Thickness & wear layer: 4–8 mm core thickness with 0.3 / 0.5 / 0.7 mm wear- resistant layer options Size & format: standard plank sizes or customized dimensions on request Packaging & labeling: neutral packaging, customer-branded boxes, or private- label cartons Certification support:ISO9001 (quality management), ISO14001 (environmental management), EU CE, US FCC For OEM inquiries, buyers are welcome to submit design files, target market certification requirements, and order volume for a tailored quotation. Applications Residential: Ki , tchens, bathrooms, laundry rooms, basements, living areas, bedrooms, entryways. Commercial: Retail stores, offices, restaurants (front of house), hotels, classrooms, healthcare facilities, light industrial.

One-stop 3D Scanning and Intelligent Planning System for Intelligent Construction Advantages of Products Argus is equipped with the Lingguang K1 3D Reconstruction Module and a high- performance planning host. By integrating multi-line LiDAR, 4-eye vision technology, and self-developed neural network algorithms, the system achieves full-process automation—from spatial digitalization to the generation of operational commands. The system features a relative accuracy of 1.2 cm and an absolute accuracy of 3 cm, supporting 360° full-field mobile scanning. Leveraging an ultra-fast computing power of 15 minutes per unit, it automatically completes component recognition, process planning, and path optimization. Through 1:1 global visual simulation, it restores operational details to enable scene simulation and interference detection. After each planning session, the system automatically calculates and outputs the robot operation coverage rate, ultimately generating a directly executable construction plan. This Construction auxiliary robots realizes a seamless coordination of "Real-scene Perception — Intelligent Planning — Robotic Execution."

Large-area ceramic tile installation is one of the most physically demanding and skill-dependent operations in interior fit-out. On a commercial project — a shopping mall, airport terminal, office building lobby, or industrial facility — contractors face the same set of compounding problems every cycle:Physical toll and safety liability and Inconsistent finish quality. The Ceramic Floor Tile Laying Robot was developed to resolve each of these constraints simultaneously, bringing automation to the three-stage ceramic tile installation workflow that previously required teams of experienced tradespeople to execute at pace. Advantages of Products The Floor Tile Laying Robot supports thin-bed installation for mainstream tile specifications and is widely used in large-scale projectsincluding public and commercial buildings, in dustrial plants, transportation infrastructure, and emergency repairs. High Efficiency: Max Work Efficiency: 120 m/h Replace Persons' Workload:3-5. High Precision: The error in brick joint width is within ±0.5mm, and the height difference between two bricks is controlled within ±0.5mm.

The Fangshi 433D is a three-function integrated interior wall finishing robot that automates the three core wall surface construction operations — putty spray-scraping, putty sanding, and latex paint spraying — in a single autonomous machine. Designed for interior decoration construction contractors working on residential buildings, apartment complexes, office buildings, and standard-height commercial interiors, the 433D replaces what would traditionally require separate machines and separate specialized crews for each finishing stage. Built on Fangshi's proprietary Embodied Intelligence platform, the robot combines a 6-DOF robotic arm with an AGV (Automated Guided Vehicle) omnidirectional mobile base to autonomously navigate room interiors, identify and adapt to walls, ceilings, bay windows, and structural beams, and execute each finishing stage with consistent precision. The system reaches construction heights up to 3.3 meters — covering the full vertical surface of standard residential and commercial interiors — and delivers arm attitude accuracy of ±1° with positioning accuracy of ±5 cm throughout autonomous operation.

Fangshi Concrete Power Floating and Troweling Robot is an autonomous electric floor finishing machine that performs both stages of post-pour concrete surface treatment — power floating at initial concrete setting and power troweling at final concrete setting — in a single robotic system. This dual- process capability, delivered through Fangshi's self-developed motion control system integrated with proprietary acceleration feedforward algorithms, eliminates the need for separate machines or separate crews to complete each finishing stage. The Construction Robot represents a fundamental technological reconstruction of the traditional ride-on power trowel: instead of requiring an operator to physically sit on the machine and drive it across wet concrete, Fangshi's robot operates fully autonomously under remote supervision from up to 200 meters away. The operator never needs to stand on or near the freshly finished surface, eliminating the footprint damage and quality inconsistency that are unavoidable with conventional ride-on trowels.

The Four-Wheel Concrete Laser Screed Robot is Fangshi Technology's high- capacity autonomous concrete floor leveling machine, engineered for large-area ground-floor slab construction. Designed for the concrete screeding stage — immediately following concrete pouring — this robot autonomously navigates across fresh concrete surfaces, simultaneously distributing, vibrating, and leveling the material to achieve a flat, uniform, compacted floor with laser- guided precision. Powered entirely by Fangshi's proprietary battery-driven platform, the robot produces zero carbon emissions during operation, making it suitable for enclosed environments such as underground parking structures, enclosed industrial facilities, and climate-controlled commercial interiors where diesel or gasoline-powered equipment is impractical or prohibited.