Electronics & Electrical

Key Features Connector : RP SMA JACK TO I-PEX ,Gold Plated Length 10CM (Can be Customized) RF Coaxial Cable 1.13 mm (Gray)

Description : Connector : SMA R/A Jack PCB Mount Finished : Gold Our company manufactures a full range of RF connector products, including: 1) MMCX RF coaxial connectors 2) MCX RF coaxial connectors 3) SMA RF coaxial connectors 4) SMB RF coaxial connectors 5) TNC RF coaxial connectors 6) IPEX RF coaxial connectors 7) BNC RF coaxial connectors 8) UHF RF coaxial connectors 9) FME RF coaxial connectors We also have GPS Module, GSM Module, Bluetooth Module, 3G Module, GPS mouse, Personal Tracker, Vehicle Tracker, Bluetooth GPS Receiver, GPS Antenna, GSM Antenna, GPS/GSM Antenna, RF Cable, RF Connector etc.

Top Mount, SMT Type Stand off 4.0mm ELECTRICAL Current Rating: 0.5A per pin Voltage Rating: 50V DC Contact Resistance: 55mΩ max. Insulation Resistance: 500MΩ min. Dielectric Withstanding Voltage: 300VAC MECHANICAL Durability: 100 Cycle Insertion Force: 2.3Kgf max. Extraction Force: 2.3Kgf max. ENVIRONMENTAL Operating temperature range: -40℃~+85℃ Storage temperature range: -40℃~+85℃ SOLDER ABILITY Recommended IR Reflow Temperature: 260℃ 10Sec

Bluetooth technology was first known to us as it appeared on mobile phones, replacing the traditional infrared transmission. After continuous development, Bluetooth devices have been used in smart switches to assist the functions of smart switches. Our bluetooth relay switch module combined with the traditional mechanical wall switch, not only makes the wall switch into the intelligent switch but also maintains the unity of the original wall switch and the whole home decoration. Types Of Bluetooth Switch Module 1 Gang Bluetooth Switch Module 2 Gangs Bluetooth Switch Module Advantages of Bluetooth Switch Module Compatible and Synchronous Compatible with most Bluetooth 4.0 mesh gateway. App control is synchronized with the manual switch. Low Power Consumption Bluetooth relay module is with the lowest power consumption than other smart ways. Distance Limits With no Bluetooth mesh gateway, the distance between Phone and Device is 10m. With Bluetooth Mesh Gateway, the distance between Phone and Device can be more than 10m. Quick Speed Connection Fast connection to smartphone APP by helping with Bluetooth 4.0 chip. Home Automation Through APP and voice control, you can get multiple functions to make your home smart. Such as Timing, countdown, memory, schedule, group, share etc. User Friendly Easy install and wire connection behind the existing switch, keep function of manual switches. Voice Control You can voice command the connected lights or devices via Amazon Alexa/Echo/Dot, Google assistant, IFTTT etc. Quality & Warranty CE, RoHS approved by Authoritative Intertek test lab. 2 Years warranty. Accept customer customization for logo, color box, etc. Aihomestyle provides bluetooth relay, relay module bluetooth, bluetooth relay kit, bluetooth module switch, zigbee roller shutter switch and etc. For more information, please feel free to contact us!

Minimum Order: 2000

The led strip bluetooth adapter is equipped with newest bluetooth technology. Bluetooth is a wireless technology standard. The band is around 2.4GHz. It has a wide range of channel advantages and been widely used in smart homes, sports metering, mobile phone peripherals etc. Different Types Of Bluetooth RGBCW LED Strip Controller bluetooth led controller bluetooth led light controller bluetooth led light strip controller QS-BLE-RGBCW Bluetooth Smart RGBCW LED Light Strip Controller Voltage 12V-24VDC Max. load 96W(12V) / 192W(24V) for LED Dims (WxDxH) 115x45x18 mm Parameters Of Bluetooth RGBCW LED Strip Controller Protocol Bluetooth 4.0 Wireless Mesh Operation temp. -20ºC - +50ºC Case temp. Tc +80ºC (Max.) Operation range ≤ 10 m IP rating IP20 Certificates CE ROHS Warranty 3 years Features Of bluetooth controller rgb Compatible with most Bluetooth 4.0 mesh gateway. With BLE Mesh Gateway, the distance between Phone and Device can be more than 10m. With no BLE mesh gateway, the distance between Phone and Device is 10m. Control the ON/OFF, brightness, color changing of all types of LED strip lights. Voice control compatible with Google home and Amazon Alex etc. Schedule,group, scene, automation functions available,easily achieve home automation. Accept customer customization for logo, color box. etc. Quality Standard Of bluetooth 4.0 led controller EMC Standard (EMC) ETSI EN 300 328 V2.1.1 (2016-11) , ETSI EN 301 489-1 V2.1.1 (2017-02) ETSI EN 301 489-17 V3.1.1 (2017-02) , EN 62479:2010, EN 61547:2009, EN 55015:2013+A1:2015, EN 61000-3-2:2014 , EN 61000-3-3:2013 EN IEC 61058-1:2018; EN 61058-1-2:2016 Safety Standard (LVD) IEC 60669-2-1:2002 / AMD1:2008 / AMD2:2015, IEC 60669-1:1998 / AMD1:1999 / AMD2:2006, EN 60669-2-1: 2004+A1: 2009+A2: 2010, EN 60669-1:2018 Radio Equipment (RED) ETSI EN 300 328 V2.1.1 (2016-11) RoHS Standard (RoHS) 2011/65/EU, (EU) 2015/863 For more details of wifi roller shutter switch, please visit our website.

Minimum Order: 2000

This smart Bluetooth 4.0 dimmer module is an essential accessory for your home automation system. It is compatible with Amazon Alexa / Echo / Dot and Google Home. After activating the skill, you can control the brightness/ON/OFF of the connected lights by voice command. Also supports remote control by mobile phone App. You can adjust the brightness anywhere in the room. Types Of Bluetooth Dimmer Module 1 Gang Bluetooth Dimmer Module 2 Gangs Bluetooth Dimmer Module Advantages of Bluetooth Dimmer Module Bluetooth Protocol This bluetooth lamp dimmer module is designed with Bluetooth 4.0 chip. With no Bluetooth mesh gateway, the distance between Phone and Device is 10m. With Bluetooth 4.0 Mesh Gateway, the distance between Phone and Device can be more than 10m. Installation Small size to install in the wiring box behind the traditional dimmer switch. It can transform your traditional dimmer into smart dimmer. Tuya App Control Support mobile phone App “Smart Life” and Tuya App to control the lights. App control is synchronized with the manual dimmer switch. Alexa/Google Home Voice Control You can control this module via voice command through Alexa / Google home to turn on/off or set the brightness of the connected lights. Just say“Alexa, turn on the lights”. Power Saving Bluetooth switch module is with the lowest power consumption than other smart ways. Multiple Functions Support timer function, multi-users control and memory function. One dimmer switch can be controlled by multi-phones and one phone can control several dimmer switch. Quality & Warranty CE, RoHS approved by Authoritative Intertek test lab. 2 Years warranty. Accept customer customization for logo, color box, etc.

Minimum Order: 2000

This is zigbee 2 gang switch Module. You can choose the module has or has no neutral wire according to yur needs. The devices connected to our smart switch module can be linked to your mobile phone by Zigbee signals. Then you can control 2 different channels by one mobile app. D ifferent Types Of micro switch zigbee Module 2 gang zigbee switch 2 channel zigbee switch module QS-Zigbee-S04-2C-LN 2 Gangs Smart Zigbee Switch Module with neutral wire Voltage 100-240V AC Max. load: 2X1150W Dims (WxDxH): 46x46x18mm With reset key zigbee 2 way switch zigbee two way switch QS-Zigbee-S04-2C-L 2 Gangs Smart Zigbee Switch Module with no neutral wire Voltage 100-240V AC Max. load: 2x100W for LED Dims (WxDxH): 46x46x18mm With reset key Parameters Of 2 Gangs Zigbee Switch Module Protocol Zigbee 3.0 Operation frequency 2.4-2.484GHz IEEE802.15.4 Operation temp. -10ºC - +40ºC Case temp. Tc +80ºC (Max.) Operation range ≤ 200 m IP rating IP20 Certificates CE ROHS Warranty 2 years Features Of zigbee 2 gang Switch Module Compatible with most Zigbee 3.0 gateway. With/Without neutral wire. 2 gangs to control more devices according to your needs. Mininum brightness is settable. Easy to install behind the existing switch, keep function of manual switches. App control is synchronized with the manual switch. Voice control compatible with Google home and Amazon Alex etc. Schedule,group, scene, automation functions organizable with other smart home devices,easily achieve home automation. Accept customer customization for logo, color box. etc. Quality Standard Of 2 Gangs Zigbee Switch Module EMC Standard (EMC) EN 301 489-1 V2.1.1, EN 301 489-17 V3.1.1, EN 300 328 V2.1.1 (2016-11), EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011, EN 62311:2008 EN 60669-2-1: 2004 +A1: 2009+ A12: 2010; EN 60669-1: 2018; EN 62493: 2015 Safety Standard (LVD) IEC 60669-2-1:2002 / AMD1:2008 / AMD2:2015, IEC 60669-1:1998 / AMD1:1999 / AMD2:2006 Radio Equipment (RED) 2014/53/EU – Article 3.1(a), 3.1(b) & article 3.2 RoHS Standard (RoHS) 2011/65/EU, (EU) 2015/863. Aihomestyle provides zigbee 3.0 wall switch, zigbee 3.0 light switch, smart switch zigbee and etc. For more information, please feel free to contact us!

Minimum Order: 2000

This 2 gangs smart dimmer module is linked to mobile phone by Zigbee signals. ZigBee technology is with high security which comes from its systematic design. Its low-power technology and strong networking capability allows this 2 gang zigbee dimmer module to be widely used in the field of smart homes. Different Types Of 2 gang zigbee dimmer Module smart dimmer zigbee zigbee box dimmer QS-Zigbee-D02-TRIAC-2C-LN 2CH WIFI Dimmer Module with Neutral Voltage 100-240VAC Max. load: 2x100W Dims (WxDxH): 46x46x18mm zigbee box dimmer QS-Zigbee-D02-TRIAC-2C-L 2CH WIFI Dimmer Module without Neutral Voltage 100-240VAC Max. load: 2x100W Dims (WxDxH): 46x46x18mm. Parameters Of 2 Gangs Zigbee Dimmer Module Protocol zigbee 3.0 dimmer Dimming type Trailing Edge Operation frequency 2.4-2.484GHz IEEE 802.15.4 Operation temp. -10ºC - +40ºC Case temp. Tc +80ºC (Max.) Operation range ≤ 200 m IP rating IP20 Certificates CE ROHS Warranty 2 years Features Of 2 Gangs Zigbee Dimmer Module Compatible with most Zigbee 3.0 gateway. With/Without neutral wire. 2 gangs to control more devices according to your needs. Easy to install behind the existing dimmer switch, keep function of manual dimmer switches. App control is synchronized with the manual dimmer switch. Voice control compatible with Google home and Amazon Alex. Mininum brightness is settable. Schedule, group, scene, automation functions organizable with other smart home devices, easily achieve home automation. Quality Standard Of 2 Gangs Zigbee Dimmer Module EMC Standard (EMC) EN 61000-6-1:2007 EN 61000-6-3:2007+A1:2011 EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 300 328 V2.1.1 EN 62311:2008 Safety Standard (LVD) IEC 60669-2-1:2002 / AMD1:2008 / AMD2:2015, IEC 60669-1:1998 / AMD1:1999 / AMD2:2006, EN 60669-2-1: 2004+A1: 2009+A2: 2010, EN 60669-1:2018 Radio Equipment (RED) ETSI EN 300 328 V2.1.1 (2016-11) RoHS Standard (RoHS) 2011/65/EU, (EU) 2015/863.

Minimum Order: 2000

This 2 gang wifi switch module works with Wi-Fi technology. It is a wireless transmission technology. The standard is IEEE802.11 b/g/n. The frequency band is generally 2.4GHz. At present, WIFI is widly used in smart home control. Such as TVs, air conditioners, lamps, curtains, etc. Different Types Of 2 Gang Wi Fi Switch Module 2 Gang Wireless Light Switch 2 Gang Wifi Switch alexa light module QS-WIFI-S04-2C 2 Channel micro switch wifi Module Voltage 100-240VAC, 50-60Hz Max. load: 2x5A, 2x1150W / 2x150W for LED lamp Dims (WxDxH): 46x46x18mm(without clip) With reset key Parameters Of 2 Gangs Wi-Fi Switch Module Operation frequency 2.4GHz - 2.4835GHz WIFI WiFi WiFi 802.11 b/g/n Operation temp. -10ºC - +40ºC Case temp. Tc +80ºC (Max.) Operation range ≤ 200 m IP rating IP20 Certificates CE ROHS Warranty 2 years Features Of 2 Gangs wifi micro switch Module Protocol: WIFI / Bluetooth / Zigbee / RF remote. 2 gangs to control more devices according to your needs. Easy to install behind the existing switch, keep function of manual switches. App control is synchronized with the manual switch. Voice control compatible with Google home and Amazon Alex etc. Schedule,group, scene, automation functions organizable with other smart home devices,easily achieve home automation. Accept customer customization for logo, color box. etc. Quality Standard Of 2 Gangs Wi-Fi Switch Module EMC Standard (EMC) EN 300 328 V2.1.1 (2016-11), EN 301489-1 V2.1.1 (2017-02), EN 301489-17 V3.1.1 (2017-02), EN 62311: 2008, EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011 Safety Standard (LVD) IEC 60669-2-1:2002 / AMD1:2008 / AMD2:2015, IEC 60669-1:1998 / AMD1:1999 / AMD2:2006, EN 60669-2-1: 2004+A1: 2009+ A2: 2010, EN 60669-1:2018 RoHS Standard (RoHS) 2011/65/EU, (EU) 2015/863 Radio Equipment (RED) ETSI EN 300 328 V2.1.1 (2016-11).

Minimum Order: 2000

This wifi dimmer switch 2 gang to connect more devices in 2 electric circuits on it. It is linked to mobile phone by WiFi technology. WIFI is the most commonly used wireless network transmission technology today. Almost all smart phones, tablets and laptops support Wifi Internet access. It is widely used in smart home area. Different Types Of 2 Gangs Wi-Fi Dimmer Module 2 gang smart dimmer wifi 2 gang dimmer switch smart dimmer 2 gang QS-WIFI-D02-TRIAC-2C 2 Channels WIFI Dimmer Module Voltage 100-240VAC Max. load: 2x100W Dims (WxDxH): 46x46x18mm(without clip) Parameters Of 2 Gangs smart led dimmer module WiFi WiFi 802.11 b/g/n Dimming type Trailing Edge Operation frequency 2.4GHz - 2.4835GHz WIFI Operation temp. -10ºC - +40ºC Case temp. Tc +80ºC (Max.) Operation range ≤ 200 m IP rating IP20 Certificates CE ROHS Warranty 2 years Features Of wifi dimmer 2 gang Module 2 gangs to control more devices according to your needs. No hub required, WIFI router is enough. Easy to install behind the existing dimmer switch, keep function of manual dimmer switches. App control is synchronized with the manual dimmer switch. Voice control compatible with Google home and Amazon Alex. Mininum brightness is settable. Schedule, group, scene, automation functions organizable with other smart home devices, easily achieve home automation. Quality Standard Of 2 gang wifi dimmer Module EMC Standard (EMC) ETSI EN 300 328 V2.1.1 (2016-11) , ETSI EN 301 489-1 V2.1.1 (2017-02), ETSI EN 301 489-17 V3.1.1 (2017-02), EN 62311: 2008, EN 55015:2013+A1:2015, EN 61547:2009, EN 61000-3-2:2014, EN 61000-3-3:2013 Safety Standard (LVD) IEC 60669-2-1:2002 / AMD1:2008 / AMD2:2015, IEC 60669-1:1998 / AMD1:1999 / AMD2:2006, EN 60669-2-1: 2004+A1: 2009+A2: 2010, EN 60669-1:2018 Radio Equipment (RED) ETSI EN 300 328 V2.1.1 (2016-11) RoHS Standard (RoHS) 2011/65/EU, (EU) 2015/863.

Minimum Order: 2000

This 2 gangs Bluetooth Switch Module connect to mobile app or smart speaker by bluetooth signals. Bluetooth communication is an emerging short-distance, low- cost, and high-speed wireless network technology with high communication efficiency. Different Types Of 2 Gangs Bluetooth Switch Module 2 channel bluetooth relay module QS-BLE-S04-2C 2 Gangs Smart Bluetooth Switch Module Voltage 220-240V AC Max. load: 2x5A, 2x1150W / 2x150W for LED lamp Dims (WxDxH): 46x46x18mm Parameters Of 2 Gangs Bluetooth Switch Module Protocol Bluetooth 4.0 Wireless Mesh Operation temp. -10ºC - +40ºC Operation range ≤ 10 m IP rating IP20 Certificates CE ROHS Warranty 2 years Features Of 2 Gangs Bluetooth Switch Module Compatible with most Bluetooth 4.0 mesh gateway. 2 gangs to control more devices according to your needs. With BLE Mesh Gateway, the distance between Phone and Device can be more than 10m. With no BLE mesh gateway, the distance between Phone and Device is 10m. Easy to install behind the existing switch, keep function of manual switches. App control is synchronized with the manual switch. Voice control compatible with Google home and Amazon Alex etc. Schedule,group, scene, automation functions organizable with other smart home devices,easily achieve home automation. Accept customer customization for logo, color box. etc. Quality Standard Of 2 Gangs Bluetooth Switch Module Quality Standard Of EN 300 328 V2.1.1 (2016-11), EN 301489-1 V2.1.1 (2017-02), EN 301489-17 V3.1.1 (2017-02), EN 62311: 2008, EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011 Safety Standard (LVD) IEC 60669-2-1:2002 / AMD1:2008 / AMD2:2015, IEC 60669-1:1998 / AMD1:1999 / AMD2:2006, EN 60669-2-1: 2004+A1: 2009+ A2: 2010, EN 60669-1:2018 Radio Equipment (RED) ETSI EN 300 328 V2.1.1 (2016-11) RoHS Standard (RoHS) 2011/65/EU, (EU) 2015/ 863.

Minimum Order: 2000

Battery Contact Probe Test Pogo Pin BIP39 for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP39 series of battery contact probes. The outside diameter is usually 3.89 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 5.084 mm (200 mil) Current Rating: 3 Amps, continuous Contact Resistance: 40 milliohms (Maximum) Full Stroke: 2.6 mm Rated Stroke: 1.7 mm Spring Force: 113/ 255 gf (4/ 9 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: Brass, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Switch Probe Pogo Pin SWP164 for Electronic Test Switch probes are a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP164. Its diameter is 1.64 mm and total length is 44.65 mm. As usual, switch probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP164 is 160 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently gold plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold and nickel plated. The insulating sleeve is made of POM For details of SWP164 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 160 milliohms, maximum Full Stroke: 5 mm Rated Stroke: 3.3 mm Spring Force: 130 gf (4.5 oz) Normal Condition: Disconnecting between Plunger 1 and Plunger 2 Press down 1 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Au on Ni Plated Spring: SWP, Au on Ni Plated Plunger 1: BeCu, Au on Ni Plated Plunger 2: BeCu, Au on Ni Plated Insulating Sleeve: POM For more information, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Spring Loaded Pogo Pin Test Probe BIP70 Series for Battery Connector Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP170 series of battery contact probes. The outside diameter is usually 1.7 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms (Maximum) Full Stroke: 3.5 mm Rated Stroke: 2 mm Spring Force: 230 gf (8 oz) Materials Contact Barrel: Phosphor Bronze, Gold Plated Spring: Music Wire, Gold Plated Plunger: Beryllium Copper, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100