Electronics & Electrical

This wifi dimmer switch 2 gang to connect more devices in 2 electric circuits on it. It is linked to mobile phone by WiFi technology. WIFI is the most commonly used wireless network transmission technology today. Almost all smart phones, tablets and laptops support Wifi Internet access. It is widely used in smart home area. Different Types Of 2 Gangs Wi-Fi Dimmer Module 2 gang smart dimmer wifi 2 gang dimmer switch smart dimmer 2 gang QS-WIFI-D02-TRIAC-2C 2 Channels WIFI Dimmer Module Voltage 100-240VAC Max. load: 2x100W Dims (WxDxH): 46x46x18mm(without clip) Parameters Of 2 Gangs smart led dimmer module WiFi WiFi 802.11 b/g/n Dimming type Trailing Edge Operation frequency 2.4GHz - 2.4835GHz WIFI Operation temp. -10ºC - +40ºC Case temp. Tc +80ºC (Max.) Operation range ≤ 200 m IP rating IP20 Certificates CE ROHS Warranty 2 years Features Of wifi dimmer 2 gang Module 2 gangs to control more devices according to your needs. No hub required, WIFI router is enough. Easy to install behind the existing dimmer switch, keep function of manual dimmer switches. App control is synchronized with the manual dimmer switch. Voice control compatible with Google home and Amazon Alex. Mininum brightness is settable. Schedule, group, scene, automation functions organizable with other smart home devices, easily achieve home automation. Quality Standard Of 2 gang wifi dimmer Module EMC Standard (EMC) ETSI EN 300 328 V2.1.1 (2016-11) , ETSI EN 301 489-1 V2.1.1 (2017-02), ETSI EN 301 489-17 V3.1.1 (2017-02), EN 62311: 2008, EN 55015:2013+A1:2015, EN 61547:2009, EN 61000-3-2:2014, EN 61000-3-3:2013 Safety Standard (LVD) IEC 60669-2-1:2002 / AMD1:2008 / AMD2:2015, IEC 60669-1:1998 / AMD1:1999 / AMD2:2006, EN 60669-2-1: 2004+A1: 2009+A2: 2010, EN 60669-1:2018 Radio Equipment (RED) ETSI EN 300 328 V2.1.1 (2016-11) RoHS Standard (RoHS) 2011/65/EU, (EU) 2015/863.

Minimum Order: 2000

This 2 gangs Bluetooth Switch Module connect to mobile app or smart speaker by bluetooth signals. Bluetooth communication is an emerging short-distance, low- cost, and high-speed wireless network technology with high communication efficiency. Different Types Of 2 Gangs Bluetooth Switch Module 2 channel bluetooth relay module QS-BLE-S04-2C 2 Gangs Smart Bluetooth Switch Module Voltage 220-240V AC Max. load: 2x5A, 2x1150W / 2x150W for LED lamp Dims (WxDxH): 46x46x18mm Parameters Of 2 Gangs Bluetooth Switch Module Protocol Bluetooth 4.0 Wireless Mesh Operation temp. -10ºC - +40ºC Operation range ≤ 10 m IP rating IP20 Certificates CE ROHS Warranty 2 years Features Of 2 Gangs Bluetooth Switch Module Compatible with most Bluetooth 4.0 mesh gateway. 2 gangs to control more devices according to your needs. With BLE Mesh Gateway, the distance between Phone and Device can be more than 10m. With no BLE mesh gateway, the distance between Phone and Device is 10m. Easy to install behind the existing switch, keep function of manual switches. App control is synchronized with the manual switch. Voice control compatible with Google home and Amazon Alex etc. Schedule,group, scene, automation functions organizable with other smart home devices,easily achieve home automation. Accept customer customization for logo, color box. etc. Quality Standard Of 2 Gangs Bluetooth Switch Module Quality Standard Of EN 300 328 V2.1.1 (2016-11), EN 301489-1 V2.1.1 (2017-02), EN 301489-17 V3.1.1 (2017-02), EN 62311: 2008, EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011 Safety Standard (LVD) IEC 60669-2-1:2002 / AMD1:2008 / AMD2:2015, IEC 60669-1:1998 / AMD1:1999 / AMD2:2006, EN 60669-2-1: 2004+A1: 2009+ A2: 2010, EN 60669-1:2018 Radio Equipment (RED) ETSI EN 300 328 V2.1.1 (2016-11) RoHS Standard (RoHS) 2011/65/EU, (EU) 2015/ 863.

Minimum Order: 2000

Battery Contact Probe Test Pogo Pin BIP39 for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP39 series of battery contact probes. The outside diameter is usually 3.89 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 5.084 mm (200 mil) Current Rating: 3 Amps, continuous Contact Resistance: 40 milliohms (Maximum) Full Stroke: 2.6 mm Rated Stroke: 1.7 mm Spring Force: 113/ 255 gf (4/ 9 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: Brass, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Switch Probe Pogo Pin SWP164 for Electronic Test Switch probes are a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP164. Its diameter is 1.64 mm and total length is 44.65 mm. As usual, switch probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP164 is 160 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently gold plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold and nickel plated. The insulating sleeve is made of POM For details of SWP164 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 160 milliohms, maximum Full Stroke: 5 mm Rated Stroke: 3.3 mm Spring Force: 130 gf (4.5 oz) Normal Condition: Disconnecting between Plunger 1 and Plunger 2 Press down 1 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Au on Ni Plated Spring: SWP, Au on Ni Plated Plunger 1: BeCu, Au on Ni Plated Plunger 2: BeCu, Au on Ni Plated Insulating Sleeve: POM For more information, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Spring Loaded Pogo Pin Test Probe BIP70 Series for Battery Connector Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP170 series of battery contact probes. The outside diameter is usually 1.7 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms (Maximum) Full Stroke: 3.5 mm Rated Stroke: 2 mm Spring Force: 230 gf (8 oz) Materials Contact Barrel: Phosphor Bronze, Gold Plated Spring: Music Wire, Gold Plated Plunger: Beryllium Copper, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Switch Probe Pogo Pin SWP298 Series for Electronic Test Switch probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP298. Its diameter is 2.98 mm and total length is 49 mm. As usual, switch probes do not entail very high currents, and this model SWP298 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP298 is 50 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently gold and nickel plated during the galvanic plating phase. The spring is made of SUS. One plunger is made of BeCu plated with gold and nickel. Another plunger is made of brass plated with nickel. The insulating sleeve is made of POM For details of SWP298 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms, maximum Full Stroke: 4.67 mm Rated Stroke: 2.5 mm Spring Force: 200 gf at load 2.5 mm Normal Condition: Disconnecting between Plunger 1 and Plunger 2 Press down 2 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Au on Ni Plated Spring: SUS Plunger 1: BeCu, Au on Ni Plated Plunger 2: Brass, Ni Plated Insulating Sleeve: POM For details, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Spring Pogo Pin Battery Contact Test Probe BIP94 for Connector Application Battery contact probes are characterized by excellent conductivity, low resistance and high stability. They are mainly used for contact, connection and conduction, for example they can be used for connecting batteries or other electrical components. Battery contact probes are made from high-end materials. The specifications, outside diameters and tip styles vary considerably from probe to probe. Many common models are always kept in stock so as to meet the needs of various industries for bulk orders. A battery contact probe is often comprised of a barrel, a plunger and a spring. The barrel is usually manufactured from brass and phosphor bronze is an alternative for customization. The spring is often made from music wire and stainless steel is an alternative. The plunger is made from beryllium copper and high carbon steel is a custom-made choice. A whole probe is plated with gold in order to strengthen the conductivity. The products in this page are classified into BIP94 series of battery contact probes. The outside diameter is usually 0.94 mm and there are some common tip styles, for example J. For details, please check below parameters. Technical Specifications Recommended Minimum Center: 1.27 mm (50 mil) Current Rating: 3 Amps, continuous Contact Resistance: 40 milliohms (Maximum) Full Stroke: 0.78 mm Rated Stroke: 0.7 mm Spring Force: 30 gf (1.05 oz) Materials Contact Barrel: Brass, Gold Plated Spring: Music Wire, Gold Plated Plunger: BeCu/SK4, Gold Plated For more information, please check below catalog. Company information: Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Switch Probe Test Pogo Pin SWP137 Series for Connection Switch probes is a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP137. Its diameter is 1.37 mm and total length is 30.75 mm. As usual, switch probes do not entail very high currents, and this model SWP137 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP137 is 80 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently nickel plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold and nickel plated. The insulating sleeve is made of POM For details of SWP137 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 80 milliohms, maximum Full Stroke: 4 mm Rated Stroke: 2.7 mm Spring Force: 150 gf (6.5 oz) Normal Condition: Disconnecting between Plunger 1 and Plunger 2 Press down 0.7 mm: Continuity between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Nickel Plated Spring: Music Wire, Gold Plated Plunger 1: BeCu, Gold Plated Plunger 2: BeCu, Gold Plated Insulating Sleeve: POM For more information, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Gold Plated Switch Probe Test Pogo Pin SWP260 Series for Connection Switch probes are a kind of functional probes. They are used to determine the correct location of a terminal in a connector. They can also be used to determine the presence of nonconductive components, etc. Their application field is mainly as below Wire harness connector PCB component detection Door open-close switch Fixture component detection Automation process sensing Position and retention force Below switch probe we will introduce is SWP260. Its diameter is 2.6 mm and total length is 39.6 mm. As usual, switch probes do not entail very high currents, and this model SWP260 can work with the current up to 3 A. The typical maximum contact resistance of this model SWP260 is 50 mΩ. The materials used for the construction of switch probes are different for each component: The barrel is made of brass. Subsequently nickel plated during the galvanic plating phase. The spring is made of gold plated music wire. The plunger is made of BeCu, then gold or nickel plated. The insulating sleeve is made of POM For details of SWP137 switch probe, please check below parameters. Technical Specifications Recommended Current Rating: 3 Amps, continuous Contact Resistance: 50 milliohms, maximum Full Stroke: 5 mm Rated Stroke: 3.5 mm Spring Force: 130 gf (4.5 oz) Normal Condition: Continuity between Plunger 1 and Plunger 2 Press down 0.7 mm: Disconnecting between Plunger 1 and Plunger 2 Materials Contact Barrel: Brass, Nickel Plated Spring: Music Wire, Gold Plated Plunger 1: BeCu, Gold Plated Plunger 2: BeCu, Gold Plated Insulating Sleeve: POM For more information, please check below catalog. Advantages of this switch probe Reliable performance Low cost of test Best yield Our company are also able to change the head shape, total length and diameter, etc., of our switch probes to facilitate their use in different applications. The pitch of installation of switch probes depends on your specific needs. Company Information Centalic Technology Development Ltd. was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment. Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switch probes, big- current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals. Our company owns professional R&D, production, sales teams under the working principle of 'quality, punctuality, confidentiality' to totally efficiently develop test probes in accordance with the requirements of customers' test projects and meet the needs of customers for mass production as well as developing markets. With many years' continuous endeavour of our staff, Centalic has built a solid foundation in this industry and our products have been sold all over the world. Welcome to browse our website and download any catalogs of our products. If you need a complete set of product manual, please feel free to contact us. Many products are not uploaded due to a huge range. If you can't find what you need, please feel free to contact us. Notice: Stock: standard product. As usual, they are in stock. Express: DHL, FedEx, UPS, etc. Payment: T/T, PayPal

Minimum Order: 100

Model Number:UIYDI6075A136T174P200 Frequency Range:136~174MHz Bandwidth:40% Insertion Loss:0.5dB Isolation:22dB VSWR:1.2 Forwar , d Power:200W Reverse Power:100W Connector Type:TAB Temperature:-30~+70°C Dimension:60 , *75*28mm

Minimum Order: 1 bags

Model Number:UIYSC12A55T6 Frequency Range：5500~6000MHz Bandwidth:20% Insertion Loss:0.3dB Isolation:23dB VSWR:1.2 Forwar , d Power:30W Reverse Power:30W Connector Type:SMT Temperature:-40~+85°C

Minimum Order: 1 bags

Part Number: TST070WVBE-64 Display Mode: TFT LCD Resolution: 800x480 Manufacturer: China Interface Type: RGB interface Warranty: 1 year Operating Temperature: -20℃~70℃ Storage Temperature: -30℃~80℃

Minimum Order: 2 barrels

Part Number: TSM256128C- B Display Mode: TFT LCD Resolution: 256x128 Manufacturer: China Interface Type: 8600 Warranty: 1 year Operating Temperature: -20℃~70℃ Storage Temperature: -30℃~80℃

Minimum Order: 2 barrels

Part Number: TST070WVBE-33P Display Mode: TFT LCD Resolution: 800x480 Manufacturer: China Interface Type: RGB interface Warranty: 1 year Operating Temperature: -20℃~70℃ Storage Temperature: -30℃~80℃

Minimum Order: 2 barrels