Electronics & Electrical

Brand: Mitsubishi Product Name: servo driver model: mr-j4-70b1 axis servo amplifier. Mitsubishi universal AC servo amplifier melcervo-j4 series. Rated output: 0.75KW. Interface: sscnet Ш/ H。 Power supply: = phase ac200v The same server amplifier supporting sscnet Ⅲ / h. A fully synchronous system using high-speed serial optical communication can be established. It can be combined with the servo system controller to give full play to the functional performance of the servo system. By supporting the seismic algorithm of three inertial equipment, it can vibrate at two low frequencies at the same time. Mr configurator2 enables easy adjustment The low-frequency aftershock effect below 100Hz generated by the front end of the boom or the main body of the device can be effectively reduced, and the time required for aftershock control can be effectively shortened The accuracy of arc trajectory can be improved in the trajectory control of XY slide, At the same time, it can effectively control the quadrant protrusion caused by friction and distortion, Servo motor series: low inertia, medium and large capacity. Rated output: 15.0kw. Rated speed; 1500r / min. electromagnetic braking: without. Power supply: 200V. It is suitable for high-frequency operation or high acceleration and deceleration operation of medium, large capacity and low inertia products. Mitsubishi mr-j4-70b improves the environmental resistance. Hg-sr and hg-jr series products adopt IP67. High speed & high torque, shorten positioning time and realize high-speed equipment mr-j4-70b100 sites, there are 100 different drive controls. In order to meet diversified and detailed site needs as much as possible, In the configuration of mr-j4 product line, it provides rich servo amplifier and servo motor products. It can meet the different needs of different customers. Servo motor series: low inertia, small capacity. Rated output: 0.1kw Mitsubishi mr-j4-70b, rated speed: 3000r / min, electromagnetic braking: without. Power supply: 200V. The rated speed is 3000r / min and the large speed is 6000r / min. The high torque is 350% of the rated torque, realizing high knowledge transfer in the field of high rotation. It only supports hg-kr series products. Built in position encoder with high resolution Provide standard high-resolution position encoder (4194304p / rev (22bit)) to achieve more positioning function of Mitsubishi mr-j4-70b, Improve the environmental resistance. IP65 is adopted for hg-kr, hg-mr, hg-rr and hg-ur series products. Mitsubishi Electric general AC servo amplifier melcervo-j3 series. Rated output: 22.0kw. Interface type: CC link communication type (built-in positioning function) Mitsubishi servo driver. Power specification: three phase AC400V The positioning operation is realized by setting the position and speed data in the positioning table and receiving the start signal from the main controller. The setting of position, speed and other data in the positioning table and the start and stop operation can be completed through CC link communication. When the servo unit (dj-01-link) and (DJ-3) can not be used for positioning through communication, dj-01-link can be used for positioning. Using the servo amplifier with built-in positioning function, the position, speed and other data can be set through CC link communication. (corresponding to CC link version ver. 1.10) The Mitsubishi servo driver can be started, stopped and monitored through CC link communication. Serial communication reduces wiring The distributed servo control system can be constructed through CC link communication. The parameter unit mr-pru03 (option) makes parameter setting, operation and easier. The servo amplifier can be operated by dry speed control. When both stations are occupied, the speed command can be set directly through the remote passenger memory. Servo motor series: medium inertia, small capacity, rated output: 2.0kw. Rated speed: 1000r / min. electromagnetic braking: attached. Power supply: 200V. Realize the stable driving mr-j4-70b of medium capacity, medium inertia products, and realize the small total length in the industry through optimized structural design. High speed & high torque Mitsubishi mr-j4-70b can shorten positioning time, realize high-speed equipment and reduce power on torque ripple. By combining the number of poles and slots of Jiahua motor, the power on torque ripple is greatly reduced, and the smooth and constant speed operation of the equipment is further realized. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67

Minimum Order: 1 bags

The next generation servo product J4 is launched with safety specifications and eco correspondence. This product not only aims at the fastest speed in the industry, but also introduces the concept of the integration of human, machinery and environment into this product. ■ Mechanical aspect: the fastest speed frequency response performance of 2.5KHz in the industry is combined with the standard system equipped with 4194304 (22bit) decomposition for absolute position detector equipped with rotary servo motor. ■ Human aspect: towards human safety and comfortable environment, safety specifications correspond to the enrichment of easy to user design. ■ Environment: multi axis integrated servo driver with advanced function in eco era. ■ Inheritance: the combination of servo driver and controller of the previous model has a very corresponding design. Characteristic: Online products Generally, rotary servo, linear servo and direct drive servo correspond to the specifications of economic and environmental protection models with 2-axis integration and 3-axis integration. SSCNETⅢ/H Equippe , d with Mitsubishi's latest servo communication network, the data communication is the evolution of full duplex 150Mbps, the high response acceleration of the system, and the new generation products of optical fiber network are launched at the same time as J4. Advanced one touch functionality After pressing the setting torque once, the servo gain parameters such as mechanical common vibration filter and advanced vibration control filter II can be adjusted to help engineers easily achieve the optimal servo adjustment operation. Advanced vibration control filter II It has 3 low-frequency vibration control algorithms of inertial system, which can suppress two low-frequency vibrations at the same time. The vibration in the front end of the body and the corresponding device will be suppressed. Mr-j4 servo motor mr-j4-700b, a new product of Mitsubishi Electric in Japan Mr-j4 servo motor, a new product of Mitsubishi Electric in Japan 1、 Servo amplifier with conventional interface can correspond to 4mpps pulse frequency at most. 2、 Driver for motion control network sscnet Ⅲ / h. It is equipped with full closed-loop control as standard, which can drive rotary servo motor and linear servo motor. 3、 Driver for motion control network sscnet Ⅲ / h. It can drive two servo motors at the same time, saving installation space and wiring. It is equipped with full closed-loop control as standard, which can drive rotary servo motor and linear servo motor. 4、 Driver for motion control network sscnet Ⅲ / h. It can drive two servo motors at the same time, saving installation space and wiring. It is equipped with full closed-loop control as standard, which can drive rotary servo motor and linear servo motor. Mitsubishi mr-j4 series   MR-J4-A (general interface)    it has standard pulse sequence command interface and analog voltage input command interface    it can switch between various control modes such as position, speed and torque control   the standard supports command pulse frequency 4mpps   MR-J4-B(sscnet III / h interface)    the communication speed is 150Mbps and the communication cycle is 0.22ms    distance from wiring can be realized (maximum total extension distance 6400m: maximum 100m * 64 axis between stations)    because the optical fiber cable used is the same as the traditional sscnet III / h, it can be easily interchanged.   Mitsubishi servo amplifier mr-j4 series    mr-j4w3-b / mr-jw2-b (sscnet III / h interface, multi axis integrated servo amplifier)    it not only inherits the high performance, multi-function and convenience of mr-j4-b, but also drives two or three servo motors through one servo amplifier.    compared with mr-j4-b, mr-j4w2-b saves 25% - 30% installation space, and mr-j4w3-b saves about 30% installation space.   driver for motion control network sscnet Ⅲ / h. It can drive two servo motors at the same time, saving installation space and wiring. It is equipped with full closed-loop control as standard, which can drive rotary servo motor and linear servo motor.

Minimum Order: 1 bags

Related Informations: Corresponding Mitsubishi servo amplifier product model: MR-J4-10B、MR-J4-10B- RJ、MR-J4-10B-RJ010、M , R-J4-10A、MR-J4-10A-RJ、 MR-J4W2-22B、MR-J4W2-44B、MR- J4W3-222B、MR- , J4W3-444B Power supply capacity [KVA] (Note 1): 0.3 Continuous characteristics Rated output [w]: 50 Rated torque [n · M] (Note 3): 0.16 Maximum torque [n · M]: 0.56 Rated speed [R / min]: 3000 Maximum speed [R / min]: 6000 Instantaneous allowable speed [R / min]: 6900 Power at continuous rated torque [kW / S]: 5.63 Rated current [a]: 0.9 Maximum current [a]: 3.2 Regenerative braking frequency (Note 2): Mr-j4 - [times / minute]: (Note 4) MR-J4W_- [times / minute]: 2500 Inertia j [* 10 to the - 4th power kg · m square]: 0.0450 Recommended load inertia ratio (Note 1): below 17 times Speed and position encoder: absolute position and increment share 22bit encoder (resolution per revolution of servo motor: 4194304pulses / Rev) Heat resistance grade: 130 (b) Structure: fully closed self cooling (protection grade: IP65) (Note 2) Allowable load of shaft L [mm]：25 Radial [n]: 88 Thrust [n]: 59 Weight: 0.34kg Hg-kr053 product specification remarks: 1. Ratio of load inertia to motor inertia. 2. Remove the through part of the shaft. With reducer, the reducer part is about IP44. 3. When the unbalanced torque is generated like a lifting shaft, it is recommended to control the unbalanced torque within 70% of the rated torque. 4. When decelerating from the rated speed operation state to the stop state, if the actual torque is within the range of rated torque, there is no limit in the regeneration frequency. When decelerating from the maximum speed operation state to the stop state, there is no limit in the regeneration frequency if the following conditions are met. . hg-kr053: the load inertia ratio is less than 8 times, and the actual torque is within the rated torque range

Minimum Order: 1 bags

Servo motor series: low inertia, medium / high power. Rated output: 7.0kw. Rated speed: 3000r / min. electromagnetic brake: with. Shaft end specification: Standard (straight shaft). Features: low inertia, suitable for high-speed, high acceleration and deceleration operation, Mitsubishi servo motor user manual. IP rating: IP67. Application example: 1. Food processing machinery. 2. Printing press. 3. Injection molding machine (11kw, 15kw) hg-kr43bj 4. Large stamping machine (11kw, 15kw) The protection grade of hf-sp / hf-jp series motor is IP67 (except the shaft through part). Low inertia medium power servo motor (0.5KW ~ 9kw), maximum speed: 6000r / min (rated speed: 3000r / min), It is suitable for high-frequency positioning and acceleration / deceleration operations, especially the user manual of Mitsubishi servo motor of food processing machine and printing machine. Low inertia high-power servo motor without cooling fan (11kw and 15kw), maximum speed: 3000r / min (rated speed: 1500r / min). The design without cooling fan is adopted by the dry motor to make the motor structure more compact, and the wiring is reduced by using power connector (compared with hf-lp series servo motor with the same power, the volume is reduced by about 46% and the weight is reduced by about 34%) It is suitable for high-frequency positioning and acceleration / deceleration operations, especially the user manual of Mitsubishi servo motor for injection molding machine and large press. Hf-jp703 (4) / 903 (4) maximum speed: 5000r / min, servo motor series: low inertia, medium and large capacity. Rated output: 1.5kw. Rated speed: 3000r / minhg-kr43bj user manual. Electromagnetic braking: without. Power supply: 200V. High frequency operation or high acceleration and deceleration operation of medium, large capacity and low inertia products. To improve the environmental resistance, hg-sr and hg-jr series products adopt IP67 High speed & high torque. Shorten positioning time and realize high-speed equipment. In 100 sites, there are 100 different drive controls. In order to meet diversified and detailed on-site needs as much as possible, In the distribution of mr-14 product line, we provide rich user manual books of CO serving amplifier and co serving motor products hg-kr43bjj, which can meet the different needs of different customers. Motor series: low inertia, medium power. Rated output power: 11.0kw. Rated speed: 2000r / min. With brake or not: No. Shaft end: Standard (straight shaft) hg-kr43bj user manual. Voltage: 400V type. Protection level: IP65 (IP67). Features: low inertia, from low speed to high speed, three modes can be selected, suitable for different application ranges. As a standard production port, 30kW or higher power is suitable for flange (type) installation and foot installation. Application examples: injection molding machine, semiconductor manufacturing device, large conveying machinery. High resolution encoder 131072p / rev (17 bits). High resolution encoder is included to ensure excellent performance and stability at low speed. All motors are the same size as the previous products and the wiring is compatible. Servo motor series: low inertia, medium / high power, rated output: 50.0kw. Rated speed: 1500r / min. Electromagnetic brake: none. Shaft end specification: Standard (straight shaft). Voltage: 400V level. Features: there are three types of low inertia, medium and high speed models, which are suitable for different applications as the standard. Motors of 30kW and above can be installed with flanges or brackets. Hg-kr43bj manual. IP level: IP44 Mitsubishi servo motor user manual. Application example: 1. Injection molding machine. 2. Semiconductor manufacturing equipment. 3. Large material conveying system. 4. Press. The rich motor product line can optimize the performance of the machine. It has a rich product line of Shenji, including rotary servo motor, linear servo motor and direct drive Shenji.

Minimum Order: 1 bags

Fr-e740-1.5k-cht is an economical and high-performance type, 3-phase 400V power supply, and the motor capacity is * large and suitable for three standard 4- pole motors! Detailed parameters of fr-e740-1.5k-cht: 1. Power of fr-e740-1.5k-cht: 1.5kw 2. Current of fr-e740-1.5k-cht: 4A 3. Voltage of fr-e740-1.5k-cht: 3-phase 380 ~ 480v 4. Frequency of fr-e740-1.5k-cht: 50Hz / 60Hz 5. Allowable fluctuation range of voltage and frequency of fr-e740-1.5k-cht: 325 ~ 528v50hz / 60Hz (plus or minus 5%) 6. Power capacity of fr-e740-1.5k-cht: 4.5KVA 7. Overload capacity of fr-e740-1.5k-cht: 150% 60s, 200% 3S (inverse time characteristic) 8. Installation dimension of fr-e740-1.5k-cht: 140mm * 150mm * 135mm 9. Approximate weight of fr-e740-1.5k-cht: 1.9kg 10. Cooling mode of fr-e740-1.5k-cht: forced air cooling Selection method of fr-e740-1.5k-cht: 1. Fr-e740-1.5k-cht is selected according to the following load torque characteristics and is divided into the following three categories: (1) Constant torque load (2) Constant power load (3) Fluid load 2. Fr-e740-1.5k-cht is selected according to the control mode and is divided into the following five categories: (1) V / F open loop control (2) V / F closed loop control (3) Vector control without speed sensor (4) Vector control with speed sensor (5) Direct torque control Fr-e740-1.5k-cht selects the protective structure according to the use and installation environment: The protective structure of fr-e740-1.5k-cht should adapt to its installation environment, which requires consideration of environmental temperature, humidity, dust, pH, corrosive gas and other factors, which is of great significance to the long-term, stable, safe and reliable operation of fr-e740- 1.5k-cht. It is divided into the following four categories: (1) Open type (2) Closed type (3) Sealed type (4) Closed type 1. Select the frequency converter according to the load characteristics, If the load is constant torque load, Siemens MMV / MDV frequency converter shall be selected. If the load is fan and pump load, Siemens eco frequency converter shall be selected. 2. When selecting the frequency converter, the actual motor current value shall be used as the basis for the selection of the frequency converter, and the rated power of the motor can only be used as a reference. In addition, it should be fully considered that the output of the frequency converter contains high-order harmonics, which will deteriorate the power factor and efficiency of the motor. Therefore, the current of the motor increases by 10% and the temperature rise increases by about 20% compared with the power frequency power grid. Therefore, when selecting motor and frequency converter, this situation should be taken into account and appropriate allowance should be reserved to prevent excessive temperature rise from affecting the service life of motor. 3. If the frequency converter wants to run with a long cable, measures should be taken to restrain the influence of the long cable on the ground coupling capacitance to avoid insufficient output of the frequency converter. The frequency converter shall be selected by amplifying the first gear, or the output reactor shall be installed at the output end of the frequency converter. Shanghai Mitsubishi fr-e740-1.5k-cht 4. When the frequency converter is used to control several motors in parallel, the length of the motor cable and the allowable range of the frequency converter must be considered. If the specified value is exceeded, the frequency converter shall be selected by amplifying the first gear or the second gear. In addition, in this case, the control mode of the frequency converter can only be Vif control mode, and the frequency converter cannot protect the overcurrent and overload protection of the motor. At this time, it is necessary to add a fuse on each motor to realize the protection.

Minimum Order: 1 bags

Fr-d700 series Mitsubishi variable frequency governor compact multifunctional frequency converter 1. Power range: 0.47.5kw 2. General flux vector control, 150% torque output at 1Hz 3. Adopt long-life components 4. Built in Modbus RTU protocol 5. Built in brake transistor 6. Expand PID and triangular wave functions 7. Safety belt stop function FR-D720-0.4K, FR-D720-0.75K , , FR-D720-1.5K, FR-D720-2.2K, FR-D720-3.7K, FR-D720-5.5K, FR-D720 , -7.5K

Minimum Order: 1 bags

Detail Information Product classification: Mitsubishi frequency converter accessories Product name : Mitsubishi Linear noise filter Model and Specificatipn : FR-BSF01 Used to reduce line noise Applicable frequency converter ：FR-A700 , FR-F700 , FR-E700 , FR-D700 , FR- BSF01 Related Service: Condition: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. Terms: We ships worldwide and accepts T/T and Paypal. All items are subject to availability and passing our QA testing and inspection. Turnaround Time: Standard order processing is 1-2 business days plus shipping method chosen. Rush and off-hours service available for an additional fee. Packaging and Handling: Items are safely packaged in custom shipping cartons for protection. Shipping: We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded. Call to use a shipping service other than the ones listed. International Customers are responsible for all Customs fees, VAT and other fees applied by their respective countries. All shipments are fully insured.

Minimum Order: 1 bags

Function of braking resistance: 1 Protect the frequency converter; 2. Protect the power network. Braking resistance is a kind of ripple resistance, which is mainly used in the mechanical system of frequency converter controlling the rapid shutdown of motor. The firecracker motor converts the regenerative electric energy generated by the rapid shutdown into heat energy. The principle of resistance braking is that the rotor has current flow, which generates torque opposite to the rotation direction in the magnetic field of the stator, consumes the kinetic energy of the train, and achieves the purpose of braking. When the motor or other inductive load driven by the frequency converter stops, it is generally realized by energy consumption braking, that is, the kinetic energy of the motor and the magnetic energy in the coil are consumed through another energy consuming element after stopping, so as to realize rapid shutdown. Compent: Ceramic tube: it is the skeleton of alloy resistance wire and has the effect of radiator at the same time Alloy resistance wire: the flat belt has a wavy shape and is wound on the surface of the ceramic tube, which is responsible for converting the regenerated electric energy of the motor into heat energy The coating is flame-retardant on the surface of the alloy and has the characteristics of high temperature resistance Main hazards During the rapid shutdown of the motor, a large amount of regenerative electric energy will be generated due to inertia. If this part of regenerative electric energy is not consumed in time, it will directly act on the DC circuit part of the frequency converter. If it is light, the frequency converter will report fault, and if it is serious, the frequency converter will be damaged; The emergence of braking resistance solves this problem and protects the frequency converter from the harm of motor regenerative electric energy; Smooth operation The braking resistance directly converts the regenerative electric energy in the process of rapid braking of the motor into heat energy, so that the regenerative electric energy will not be fed back to the power network and will not cause grid voltage fluctuation, which plays a role in ensuring the smooth operation of the power network

Minimum Order: 1 bags

RS-232C communication function expansion board. Series Name: f920got with keys, with a series of effective functional modules. System screen display language: English. Display: 2.6 inches. Display color: monochrome (blue / white) fr-a8nc parameter setting tutorial. Display device: STN LCD Resolution: 128X64 points. Installation type: panel installation. Built in communication port: RS-422 (1ch) / RS-232C (1ch) fr-a8nc power supply voltage: DC5V. Touch screen refers to the field or interface where people and machines contact or interact in information exchange and function. The man-machine interface refers to the hard contact and soft contact between people and machines, This joint surface includes not only the direct contact between points, lines and surfaces, but also the function space of long-distance information transmission and control, fr-a8nc parameter setting tutorial. The man-machine interface is the central link in the man-machine system, It is mainly studied and put forward the basis for solution by safety ergonomics, a branch of safety engineering, and has passed safety engineering and equipment engineering, Safety management engineering and safety system engineering to study specific solutions and measures safety ergonomics fr-a8nc parameter setting tutorial. RS-232C through adapter. (fx1n-cnv-bd is required). (common to fx1s and FX1N hosts). It can be isolated from the output of programmable controller for a / B / C contact relay, SSR and tr output. Input points: 14 points. Output points: 10 points fr-a8nc (type selection data). Power supply voltage: AC100-240V. Output type: relay output. Built in CPU, power supply, input and output. Improve performance while maintaining FX1N convenience. Fx3 series special adapter and function expansion board can be installed. High speed operation processing. Basic instruction: 0.21us/instruction. Application instruction: 0.5us/instruction. Large capacity memory. There are 32000 steps of fr-a8nc in the internal program memory (type selection reference material). EEPROM memory box with program transfer function can be used. Input and output points: 16 points. Input points: 8 points. Input specification: drain type. Output points: 8 points. Output form: relay output. Power consumption: 6W. Weight: 0.25kg. Overall dimension: 34x90x87mmfr-a8nc (type selection data). The third generation micro programmable controller of jiancuo type. Connector type input / output type economizer. It has greatly strengthened the high-level built-in functions such as high- speed processing and positioning in the industry. Space saving model with high cost performance. Fx3uc not only saves space and wiring, but also greatly strengthens the internal harm functions such as high-speed processing and positioning. The host has built-in DC24V power supply and transistor output in the form of connector input and output. In addition, according to the product portfolio, it can also realize the functions of network communication, analog quantity control, data collection and so on. The 3rd generation high-function micro programmable controller. Connector type can save space and wiring. Built in high-speed processing and positioning. Small size, 256 control points, 384 points when building CC link remote 1 / O. Large input / output points: 14 points. Power supply voltage: DC24V. Input points: 8 points. Output points: 6 points. Output type: relay. Power consumption (W): 19. Weight (kg): 0.3. Dimension wxhxd) mm: 60x90x75 Positioning and pulse output function: each phase in a PLC unit can output two 100kHz pulses at the same time. PLC is equipped with 7 special positioning commands, The sentence includes zero return, pair or relative address expression and special pulse output control. The host has four types: 10 points (6 / / 4O), 14 points (8L / 6O), 20 points (121 / 8O) and 30 points (16L / 14o). This type of PLC is mainly used in equipment with all digital inputs and few control points for digital outputs. It can be directly connected to 220V mains power, built-in 8K step eeeprom memory, no battery in it, convenient maintenance, fr-a8nc selection manual. This series of transistor output (MT) PLC can output two 100kHz pulses to directly drive servo or stepper motor fr-a8nc parameter setting tutorial. This series of PLC cannot be equipped with expansion module, but a small amount of / / 0 can be expanded by installing BD board This series of PIC can realize rs232rs485rs422 communication by installing 1n series BD board

Minimum Order: 1 bags

Condition: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. Terms: We ships worldwide and accepts T/T and Paypal. All items are subject to availability and passing our QA testing and inspection. Turnaround Time: Standard order processing is 1-2 business days plus shipping method chosen. Rush and off-hours service available for an additional fee. Packaging and Handling: Items are safely packaged in custom shipping cartons for protection. Shipping: We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded. Call to use a shipping service other than the ones listed. International Customers are responsible for all Customs fees, VAT and other fees applied by their respective countries. All shipments are fully insured.

Minimum Order: 1 bags

Common faults of ABB Robot Teaching Pendant: 1: ABB Robot S4 and irc5 teaching devices have poor touch or local failure (replace the touch panel) 2: ABB Robot S4 and irc5 teaching pendant have no display (repair or replace internal mainboard or LCD) 3: Poor display of ABB Robot S4 and irc5 teaching pendant, vertical line, vertical belt, flower screen, broken, etc. (replace LCD screen) 4: The keys of ABB Robot S4 and irc5 teaching pendant are poor or ineffective (replace the key panel) 5: Whether the teaching pendant of ABB Robot S4 and irc5 has display backlight (replace the high-voltage board) 6: The XYZ axis of the control lever of ABB Robot S4 and irc5 teaching pendant is poor or ineffective (replace the control lever) 7: The emergency stop button of ABB Robot S4 and irc5 teaching pendant is invalid or ineffective (replace the emergency stop button) 8: The data lines of ABB Robot S4 and irc5 teaching pendant cannot communicate or be powered on, and there are broken lines inside (replace the data line) ABB Robot parts and spare parts: ABB teaching box 3hne00313-1 m1998 M2000 teaching pendant ABB Robot Teaching box 3hac023195-001 ABB Robot irc5 teaching pendant dsqc679 3hac028357-001 ABB teaching pendant 3hab5386-1 ABB teaching pendant cable 3hac031683-001 ABB teaching pendant lever jc2000-0049 t (SPL) - xyz-popop-25-spl-spl-n ABB drive 3hab8101-13 / 07B ABB teaching box LCD 3hnp04014-1 I / O signal input and output board 3hac025784-001 dsqc651 I / O signal input / output board dsqc652 3hac025917-001 ABB Robot IO board 3hea800439-002 ABB interface board dsqc327a 3hac17971-1 ABB I / O mainboard dsqc 328a 3hac17970-1 ABB Robot I / O interface board dsqc327 3hab7230-1 ABB IRB 6400 main computer board dsqc 540 3hac14279-1 ABB industrial robot teaching board 3hne00313-1 main board 3hne30055 ABB Robot control board dsqc611 3hac13389-2 DSQC643 3HAC024488-001 ABB M2004 IRC5 ABB Robot base plate 3hac14363-1 / 00 dsqc541 ABB irb6400 computer board 3hac02347-001 / 01 dsqc532b I / O computer AB

Minimum Order: 1 bags

Specification of Mitsubishi q series output module qy42p: [output type] transistor drain output module [output points] 64 points [isolation method] Optocoupler [rated load voltage] 12-24vdc (+ 20 / - 15%) [maximum load current] 0.1a/point, 1.6a/common terminal [maximum starting current] 0.7A, 10ms or less [leakage current at off] 0.1mA or less [maximum voltage drop at on] 0.1vdc (standard) 0.1A, 0.2vdc (maximum) 0.1A [on - > off response time] 1ms or less [off - > on response time] 1ms or less (rated load, resistive load) Zener diode [fuse] none [external power supply voltage] 12-24vdc (+ 20 / - 15%) (ripple coefficient within 5%) [external power supply current] 20mA (at 24VDC) / common terminal [dielectric withstand voltage] 560vacms / 3 cycles (altitude 2000m (6557.38 feet)) [insulation resistance] 10m Ω or higher measured by insulation resistance tester [immunity] through 1500vp-p noise voltage, 1 μ Voice simulator with s voice width and 25 to 60Hz voice frequency First instantaneous voice iec61000-4-4: 1kV [protection grade] IP2X [common terminal arrangement] 32 points / common end (common end: 1a01, 1a01, 2a01, 2A02) [I / O points] 64 (set the I / O allocation according to the 64 point output module.) [overheat / short-circuit protection function is activated in [with] increment [running indicator] on indication (LED) [external connection] 40 pin connector * 2 rows [applicable wire diameter] cable core: 0.3mm2 (for a6con1) [external wiring connector] a6con1, a6con2, a6con3 (optional) [connector / terminal converter] a6tbxy36, a6tbxy54 [5VDC internal current consumption] 105ma (standard: all points on) [overall dimension h * w * D] 98 * 27.4 * 90mm [weight] 0.17kg

Minimum Order: 1 bags

Qx80h is Mitsubishi q series DC high-speed input module, negative common terminal type, 16 points. Qx80h price (face price), the market stock is very small. Qx80h Parameter Description: 24VDC / 4mA, common cathode, 16 points, terminal block (high speed). Specification details of Mitsubishi PLC module qx80h: [input form] DC input module (negative common end) [input points] 16 points [isolation method] Optocoupler [rated input voltage] DC24V (+ 20% - 15%, ripple coefficient above 5%) [rated input current] about 6mA [derating chart] [on voltage / on current] 13V or higher / 3mA or higher [off voltage / off current] 8V or less / 1.6mA or less [input impedance] about 3.9k Ω [function setting SW2] off interrupt, on high speed input [dielectric withstand voltage] 560vac MS / 3 cycles (altitude 2000m (6557.38 feet)) [insulation resistance] 10m Ω or higher measured by insulation resistance tester [immunity] through 1500vp-p noise voltage, 1 μ Voice simulator with s voice width and 25 to 60Hz voice frequency First instantaneous voice iec61000-4-4: 1kV [protection grade] IP2X [common terminal arrangement] 8 points / common terminal (common terminal: tb9, tb18) [I / O points] 16 (I / O allocation is set to 16 point high-speed input module or interrupt module.) [working status indicator] set by setting in GX developer switch [running indicator] on indication (LED) [external connection] 18 point terminal block (M3 * 6 screw) [applicable wire diameter] core 0.3mm2 to 0.75mm2 (maximum outer diameter 2.8mm) [applicable to clamping terminal] R1 25 ~ 3 (clamping terminal with sleeve cannot be used) [5VDC internal current consumption] 80mA (standard: all points on) [overall dimension (h * w * d)] 98 * 27.4 * 90 [mm] [weight] 0.16kg

Minimum Order: 1 bags

4-axis, differential driver output type. Control unit: pulse. Number of positioning data: 10 data / axis. Maximum pulse output: 4mpps. 40 pin connector. Differential output. Ideal solution for simple multi axis positioning. Perfect match with stepper motor control gi71e71-100 reference manual. The acceleration and deceleration are smooth and the speed changes slightly. The speed of starting processing of positioning control is accelerated. Locate the module. Open collector output type qi71e71-100 differential driver output type It can be divided into two types: open circuit collector output type and differential driver output type The output positioning module of the differential driver can reliably transmit the high-speed command pulse (up to 4mpps) to the servo amplifier, and the transmission distance can reach 10m to realize high-speed and high-precision control. (the maximum command pulse of open collector positioning module is 200kpps.) Reduce system downtime and recovery time. With a simple operation, you can back up all the data in the CPU to the memory card gi71e71-100 reference manual. Through regular backup, the latest parameters and programs can be saved to the memory card all the time. In case of CPU failure, after replacing the CPU, the system can be restored through simple operation and through the memory card with data backed up in advance. As a result, there is no need to spend time managing backup data, and the recovery time can be reduced when the system is down. Input and output points: 4096 points. Number of input and output components: 8192 points. Program capacity: 200K steps. Processing speed: 0.0095 us. Program memory capacity: 800KB. Support USB and network. Support the installation of memory card. High speed communication between multiple CPUs The fixed scanning interruption time is shortened and the device is high- precision. The minimum interval of fixed cycle interrupt program is reduced to 100US. It can accurately obtain high-speed signal, and realize high-speed control qj71e71-100 for parallel processing of device communication (cycle is 0.88ms). The high-speed communication cycle between multiple CPUs is synchronized with the motion control, so the operation efficiency can be maximized. In addition, the performance of the latest motion control CPU is twice that of the previous model Ensure high-speed and high-precision machine control. Slot 1: no power supply is required: install the large ans series PC module with a thousand. The base plate of ANS series PLC. Qa1s series PLC 1 slot main base plate. Ans series modules can be installed. rs-232 1ch。 rs-422/485 1ch。 Through qi71c24n (- 2) RS-232 serial communication, the programmable controller can be programmed and monitored with programming tools. Qi71c24n (- R2) has the function corresponding to the public telephone line modem. The modem used can be initialized, and the connection with the target equipment can be processed. The communication can be carried out through remote equipment and programming tools, modems and public telephone lines. Using the remote password function, The Q series programmable controller can be accessed illegally via the modem function of ai71c24n (- R2). Serial communication module that can collect / change data, monitor / manage, measure data collection, etc. of programmable controller. High speed and large capacity communication qj71e71-100 manual with maximum speed of 230.4kbps and maximum 9960 words (during MC protocol communication). The reading / writing qi71e71-100 Manual of the data in the programmable controller can be executed by using the MC protocol through external devices (PC, display, etc.). By selecting the non sequential protocol and using the sequential program for communication control, between the programmable controller and the external equipment (bar code reader, measuring equipment, etc.), Use the local protocol of the external device to communicate with it.

Minimum Order: 1 bags