Insulation, Accessories & Others

Micro Tubular Brass Coil Heater With Super Thin Wall 1.5mm 1. Product introduction Press in brass coil heater, the coil heater is designed to beset in the brass sheating, can eliminate known problems associated with the casting process. The machined path in the brass for the heater enables exact repeatability of heat profile. By never exposing the coil heater to molten brass there are no risks of shifted heater coils, or destruction of the thermocouple junction.Flexible design options include internal, external "wound in" or external slotted type J or type K thermocouples. 2. Characteristics 1) Has quick heat dissipation, high insulation, greatly extend the service life of heater 2) Can be built with a Micro, Mini, Flat, Low profile, or Round Nexthermal Coil Heater. 3) Safety in use 4) Faster responding heater due to eliminated air pockets than cast in brass 5) Profile and heater orientation precisely repeatable 6) Thermocouple not exposed to molten brass temperatures – Improved durability 7) Potential for designing thin walled brass heaters to minimize OD impact 8) Faster responding heater due to eliminated air pockets than cast in brass 3. Features: 1) Standard sizes available with various cross section 2) Various Watt Density options available. 3) Robust Design with Choice of Terminal Exits 4) Available with built in Thermocouple 5) Designed for even heat profile. 6) Precision fit on Hot Runner Nozzles & Manifolds. 7) Highly Non-corrosive. 8) Maximum heat transfer due to more contact area. 9) Advanced Thermal Engineering. 4. Application 1) Injection moulding machine nozzle 2) Hot Runner Nozzles & Bushings 3) Packaging machineries 4) Hot runner Injection moulds. 5) Blow Moulding Machine Nozzles. 6) PET prefrom & Thin wall container Moulds 7) Hot runner Manifolds. Parameters are required to place an order ! Custom Micro Tubular Brass Coil Heater With Super Thin Wall 1.5mm

Product Description EOD Robot Model: HW-18 Description Mechanical arm can clamp specimen weighing 30KG to be test as below in intermediate speed circularly. Each test should be conducted continuously in continuous working time and charging during working is not allowed. The continuous working time is 3 hours. Moving ability: EOD robot can move 10 minutes clockwise and anticlockwise respectively along square track of 10m X 10m. Grade ability: On the slope whose length is more than four times of robot length and incline is more than 40° with horizontal ground, operating robot climb to top of slope and return the same way, round-trip time can last 10 minutes. Mechanical arm function: Repeated operation of driving each mechanical arm joint separately to run continuously between two limit position, can last 30 minutes. Technical Parameter Robot Body Materials Aircraft-grade aluminum alloy, precision machining Dimensions L*W*H: 910 * 650 * 500 mm Weight 90kg (without accessories, package and control box) Battery DC24V lead acid rechargeable battery Working time ≥ 3 hours Maximum Speed ≥1.2m/s Loading Capacity When loading 140KG, it can move normally (actual measurement). Lift Capability It can move with clamping weights of 40K and will not drop (actual measurement). Grade Ability It can climb up the slope of 45° and stop steadily on the slope. Climbing Stairs Ability With traction-free assist, it can climb up and down the stairs of 160mm step height and 45°angle slope. Turning Ability In horizontal cement ground or bituminous pavement, the robot can turn clockwise or anticlockwise 360º. Limited Passage Width ≤700mm Over-obstacle Capacity It can cross the obstacle of 320mm height. Max. Mechanical Arms Spread 1650mm Gripper of Manipulator Maximum Expansion Range 250mm Arm Extension when stretch out and draw back 500mm Control Distance Wireless control: ≥150m (visible range); wire control: 100m (optional 200m); Forward Camera Color infrared induction Backward Camera Color infrared induction Cradle Head Various focal Camera Color infrared induction Manipulator Gripper Camera Color infrared induction Floodlight Two group LED floodlight (one group on the front and back) Control Terminal Box Portable, waterproof, dustproof, high strength Size ≤ L 460 * W 370 *H 260 mm Weight ≤ 10kg Display Screen 12-inch HB LCD, wide viewing angle, outdoor clear picture Operation High-quality rocker handle, human software interface design, easy observation and convenient operation Display Image It can monitor 4 video signals simultaneously or separately amplify one of 4 video signals Battery Rechargeable 24V lithium battery, working time ≥ 3 hours when fully charged. 360 Degrees Turning EOD Robot 0 Company Introduction In 2008, Beijing Hewei Yongtai Technology Co., LTD was established in Beijing.Focus on the development and operation of special safety equipment, mainly serve the public security law, armed police, military, customs and other national security departments. In 2010, Jiangsu Hewei Police Equipment Manufacturing Co., LTD was established in Guannan.Covering an area of 9000 square meters of workshop and office building, it aims to build a first-class special safety equipment research and development base in China. In 2015, a military-police Reserch and development center was set up in Shenzhen.Focus on the development of special safety equipment, has developed more than 200 kinds of professional safety equipment. Jiangsu Factory 360 Degrees Turning EOD Robot 1 360 Degrees Turning EOD Robot 2 Shenzhen Research Centre 360 Degrees Turning EOD Robot 3 360 Degrees Turning EOD Robot 4 Overseas Exhibitions 360 Degrees Turning EOD Robot 5 360 Degrees Turning EOD Robot 6 Certificates 360 Degrees Turning EOD Robot 7 360 Degrees Turning EOD Robot 8 360 Degrees Turning EOD Robot 9 Staff Photo Staff from Jiangsu Factory 360 Degrees Turning EOD Robot 10 Staff from Headquarters 360 Degrees Turning EOD Robot 11 Staff from Shenzhen research centre 360 Degrees Turning EOD Robot 12

Single Phase Silicon Rubber Lightning and Power Surge Arrester for Electrical Equipment Specifications: Composite Surge Arresters can be applied to a variety of systems including substation equipment, AC-DC converters, railway power system and power distribution units ranging from 0.25kV to 765kV systems. These surge arresters demonstrate excellent protection properties. Metal oxide type surge arresters offer such special features inherent in the gap-less structure, such as a quick response to surge voltage, high energy dissipation capability, safe operation, compactness / lightweight and freedom from pollution. Type YH5W5-21/56 Rated voltage---------kV 21 MOCV ----------------kV 16 Nominal Current-------kV 5 Residual voltage of steep impulse----at 5kA(kV) 60.5 8/20µS Residual voltage of lightning impulse current kV(Peak value)-----at 5kA(kV) 56 Residual voltage of switching impulse current kV (peak value)----at 1kA (kV) 46 1mA D.C reference voltage (kV) 29.7 Line discharge level 1 2mS long duration impulse current A 200 4/10µS High current impulse kA 65 Lightning impulse withstand kV 125 Power frequency voltage withstand(dry/wet)kV 43 0.1S TOV--------------kV 25.2 1S TOV----------------kV 24.15 10S TOV---------------kV 23.1 1200S TOV-------------kV 21 Creepage distance ----mm 670 Material employed in series non-linear resistor Zinc Oxide Competitive Advantage: 1. Compact and Lightweight 2. Extremely Safe Pressure Relief Performance 3. Superior Performance against Environmental Contamination 4. Directly Molded Structure 5. Compliance with International Standards(IEC60099-4) 6. Simple Support Structure 7. Manufactured at Advanced ISO-9001 certified facilities Other: Yongde holds the quality policy of being 'the technical forerunner, supreme in quality, supremacy of customers, and innovative progressing', so that our products and services successfully satisfied our users. We warmly welcome friends and customers from home and abroad to contact for exchanges and corporations. We also welcome feedbacks from our user communities.

CJ-PS002 Micro Mitt Knitted Polyester Cleanroom/ESD Swab Cleanroom and ESD-safe swabs are for precision cleaning, surface sampling, validation procedures, and the application of lubricants or other liquids within cleanroom and other critical contamination control environments. CJ-PS knitted polyester swabs are made from cleanroom laundered knitted polyester. The 100% continuous-filament polyester substrate is thermally bonded onto the handle, sealing exposed edges for reduced fiber release and eliminating the need for adhesives. They are free from organic contaminants such as silicone, amide and phthalate esters, and features very low non-volatile residue (NVR), ion content and particle generation. Polyester is soft and non-abrasive, making the swab good for sensitive surfaces. CJ-PS002 swab is designed as a general-purpose swab for very small grooved, slotted and recessed areas plus crevices and holes. A small rigid handle and rigid core provide firm support and precise control. Our standard cleanroom swabs are not electrostatic discharge (ESD) safe, but can be manufactured as requested as ESD safe swabs to protect ESD sensitive components from electrostatic discharge. ESD-safe cleanroom swabs enable ESD-safe swabbing of small static sensitive components where ESD events must be controlled. Features: 1) Cleanroom laundered 100% continuous filament polyester knit head. 2) Free from silicone, amide and phthalate esters. 3) Low in particles, ion content and non-volatile residue. 4) Compatible with most common solvents such as IPA. Applications: 1) Cleaning with solvents such as IPA. 2) Cleaning, surface sampling and cleaning validation 3) Remove flux residues and excess materials. Specifications: Head material: cleanroom laundered knitted continuous filament polyester Handle material: polypropylene Total swab length: 70mm Head length: 10.5mm Head width: 3.2mm Head thickness: 2mm Handle length: 59.5mm Handle width: 2.3mm Handle thickness: 2.3mm Packing: 500 pcs/bag For general-purpose cleaning, please check our Polyurethane Foam Cleanroom/ESD Swabs.

Minimum Order: 100

CJ-PS001 Knitted Polyester Cleanroom/ESD Swab Cleanroom and ESD-safe swabs are for precision cleaning, surface sampling, validation procedures, and the application of lubricants or other liquids within cleanroom and other critical contamination control environments. CJ-PS knitted polyester swabs are made from cleanroom laundered knitted polyester. The 100% continuous-filament polyester substrate is thermally bonded onto the handle, sealing exposed edges for reduced fiber release and eliminating the need for adhesives. Polyester is soft and non-abrasive, making the swab good for sensitive surfaces. The flat heads possess excellent solvent-holding capacity and durability. They are free from organic contaminants such as silicone, amide and phthalate esters, and features very low non-volatile residue (NVR), ion content and particle generation. CJ-PS001 swab is designed as a general-purpose swab for precisely cleaning hard- to-reach areas or small spaces. The swab durable flat head and rigid internal paddle provide maximum surface coverage. Our standard cleanroom swabs are not electrostatic discharge (ESD) safe, but can be manufactured as requested as ESD safe swabs to protect ESD sensitive components from electrostatic discharge. ESD-safe cleanroom swabs enable ESD-safe swabbing of small static sensitive components where ESD events must be controlled. Features: 1) Cleanroom laundered 100% continuous filament polyester knit head. 2) Free from silicone, amide and phthalate esters. 3) Low in particles, ion content and non-volatile residue. 4) Compatible with most common solvents such as IPA. Applications: 1) Cleaning with solvents such as IPA. 2) Cleaning, surface sampling and cleaning validation 3) Remove flux residues and excess materials. Specifications: Head material: cleanroom laundered knitted continuous filament polyester Handle material: polypropylene Total swab length: 163mm Head length: 17mm Head width: 6mm Head thickness: 2mm Handle length: 146mm Handle width: 3mm Handle thickness: 3mm Packing: 500 pcs/bag For general-purpose cleaning, please check our Polyurethane Foam Cleanroom/ESD Swabs.

Minimum Order: 100

CJ-F002 Large Rectangular-Head PU Foam Cleanroom/ESD Swab Cleanroom and ESD-safe swabs are for precision cleaning, surface sampling, validation procedures, and the application of lubricants or other liquids within cleanroom and other critical contamination control environments. CJ-F swabs are open-cell polyurethane (PU) foam thermally bonded over polypropylene handles. The large rectangular head of CJ-F002 possesses excellent solvent-holding capacity and durability. It is free from organic contaminants such as silicone, amide and phthalate esters, and features very low non-volatile residue (NVR), ion content and particle generation. CJ-F002 swab is designed as a general-purpose swab for cleaning broad surfaces and flat areas. The open-cell polyurethane foam head combines exceptional cleanliness with particle entrapment capability. A compact, rigid handle and internal paddle provide maximum dexterity and support in confined areas. This swab also could be used as a disinfectant swab for medical application. Our standard cleanroom swabs are not electrostatic discharge (ESD) safe, but can be manufactured as requested as ESD safe swabs to protect ESD sensitive components from electrostatic discharge. ESD-safe cleanroom swabs enable ESD-safe swabbing of small static sensitive components where ESD events must be controlled. Features: 1) Compressed, 100 ppi polyurethane foam. 2) Free from silicone, amide and phthalate esters. 3) Low in particles, ion content and non-volatile residue. 4) High solvent-holding capacity, compact and non-abrasive tip. 5) Compatible with most common solvents such as IPA. Applications: 1) Cleaning with solvents such as IPA. 2) Cleaning large surfaces, printheads, equipments. 3) Remove flux residues and excess materials. Specifications: Head material: open-cell polyurethane (PU) foam Handle material: polypropylene (PP) Total swab length: 129mm Head length: 27mm Head width: 16mm Head thickness: 9.5mm Handle length: 102mm Handle width: 6.5mm Handle thickness: 2.7mm Packing: 100 pcs/bag For sensitive surfaces, please check our Knitted Polyester Cleanroom/ESD Swabs.

Minimum Order: 100

CJ-F001 Polyurethane Foam Cleanroom/ESD Swab Cleanroom and ESD-safe swabs are for precision cleaning, surface sampling, validation procedures, and the application of lubricants or other liquids within cleanroom and other critical contamination control environments. CJ-F swabs are open-cell polyurethane (PU) foam thermally bonded over polypropylene handles. The large circular head of CJ-F001 possesses excellent solvent-holding capacity and durability. It is free from organic contaminants such as silicone, amide and phthalate esters, and features very low non-volatile residue (NVR), ion content and particle generation. CJ-F001 swab is designed as a general purpose swab for cleaning curved surfaces. The open-cell polyurethane foam head combines exceptional cleanliness with particle entrapment capability. A compact, rigid handle and internal paddle provide maximum dexterity and support in confined areas. This swab also could be used as a disinfectant swab for medical application. Our standard cleanroom swabs are not electrostatic discharge (ESD) safe, but can be manufactured as requested as ESD safe swabs to protect ESD sensitive components from electrostatic discharge. ESD-safe cleanroom swabs enable ESD-safe swabbing of small static sensitive components where ESD events must be controlled. Features: 1) Compressed, 100 ppi polyurethane foam. 2) Free from silicone, amide and phthalate esters. 3) Low in particles, ion content and non-volatile residue. 4) High solvent-holding capacity, compact and non-abrasive tip. 5) Compatible with most common solvents such as IPA. Applications: 1) Cleaning with solvents such as IPA. 2) Cleaning large surfaces, printheads, equipments. 3) Remove flux residues and excess materials. Specifications: Head material: open-cell polyurethane (PU) foam Handle material: polypropylene (PP) Total swab length: 125mm Head length: 27mm Head width: 19.5mm Head thickness: 10mm Handle length: 98mm Handle width: 6.5mm Handle thickness: 2.7mm Packing: 100 pcs/bag For sensitive surfaces, please check our Knitted Polyester Cleanroom/ESD Swabs.

Minimum Order: 100

Buy new ESAOTE MYLAB CLASSC MULTIPURPOSE ULTRASOUND from IndoElectronic is 100% safe, Because IndoElectronic provide a 100% money back guarantee. Location IndoElectronic : Jl.S.Parman No.21/272 Medan Sumatera Utara 20151 Indonesia. Contact us : order@indoelectronic.com. To purchase online visit the website : Indoelectronic.com Price: USD 15,750.00 Product: Available & 100% New Original Package : Box Original Shipping: Worldwide via FedEx, DHL, UPS Payment : Wise, International Bank Transfer, Western union, Moneygram Delivery time: 7 Days Express

Buy new GE DASH 5000 PATIENT MONITOR from IndoElectronic is 100% safe, Because IndoElectronic provide a 100% money back guarantee. Location IndoElectronic : Jl.S.Parman No.21/272 Medan Sumatera Utara 20151 Indonesia. Contact us : order@indoelectronic.com. To purchase online visit the website : Indoelectronic.com Price: USD 3,700.00 Product: Available & 100% New Original Package : Box Original Shipping: Worldwide via FedEx, DHL, UPS Payment : Wise, International Bank Transfer, Western union, Moneygram Delivery time: 7 Days Express

Buy new GE MAC 5500 HD DIGITAL ELECTROCARDIOGRAPH MACHINE from IndoElectronic is 100% safe, Because IndoElectronic provide a 100% money back guarantee. Location IndoElectronic : Jl.S.Parman No.21/272 Medan Sumatera Utara 20151 Indonesia. Contact us : order@indoelectronic.com. To purchase online visit the website : Indoelectronic.com Price: USD 5,600.00 Product: Available & 100% New Original Package : Box Original Shipping: Worldwide via FedEx, DHL, UPS Payment : Wise, International Bank Transfer, Western union, Moneygram Delivery time: 7 Days Express

Buy new NEW ICRCO ICR 7200 CR SYSTEM from IndoElectronic is 100% safe, Because IndoElectronic provide a 100% money back guarantee. Location IndoElectronic : Jl.S.Parman No.21/272 Medan Sumatera Utara 20151 Indonesia. Contact us : order@indoelectronic.com. To purchase online visit the website : Indoelectronic.com Price: USD 8,750.00 Product: Available & 100% New Original Package : Box Original Shipping: Worldwide via FedEx, DHL, UPS Payment : Wise, International Bank Transfer, Western union, Moneygram Delivery time: 7 Days Express

Buy new DNTLWORKS PROCART III DENTAL MOBILE TREATMENT CONSOLE from IndoElectronic is 100% safe, Because IndoElectronic provide a 100% money back guarantee. Location IndoElectronic : Jl.S.Parman No.21/272 Medan Sumatera Utara 20151 Indonesia. Contact us : order@indoelectronic.com. To purchase online visit the website : Indoelectronic.com Price: USD 4,760.00 Product: Available & 100% New Original Package : Box Original Shipping: Worldwide via FedEx, DHL, UPS Payment : Wise, International Bank Transfer, Western union, Moneygram Delivery time: 7 Days Express

Buy new BIOLASE WATERLASE IPLUS ALL TISSUE LASER from IndoElectronic is 100% safe, Because IndoElectronic provide a 100% money back guarantee. Location IndoElectronic : Jl.S.Parman No.21/272 Medan Sumatera Utara 20151 Indonesia. Contact us : order@indoelectronic.com. To purchase online visit the website : Indoelectronic.com Price: USD 10,850.00 Product: Available & 100% New Original Package : Box Original Shipping: Worldwide via FedEx, DHL, UPS Payment : Wise, International Bank Transfer, Western union, Moneygram Delivery time: 7 Days Express

Buy new ALMA HARMONY XL from IndoElectronic is 100% safe, Because IndoElectronic provide a 100% money back guarantee. Location IndoElectronic: Jl.S.Parman No.21/272 Medan Sumatera Utara 20151 Indonesia. Contact us : order@indoelectronic.com. To purchase online visit the website: Indoelectronic.com Price: USD 22,400.00 Product: Available & 100% New Original Package : Box Original Shipping: Worldwide via FedEx, DHL, UPS Payment : Wise, International Bank Transfer, Western union, Moneygram Delivery time: 7 Days Express