Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Insulation, Accessories & Others


Home > Offers to Sell > Electronics & Electrical > Insulation, Accessories & Others

Browse leads by category:
    
    
  Electronic & Electrical Agents  
 

Summary of 3/29/24 8:17 GMT:>> Show Compact View
12/22/23 5:39 GMT
XIAODONG Brushless Electric Screwdriver For iPhone Android Tablet

Description XIAODONG P1 P2 Electric Screwdriver Disassembly Tool With Torque-limited Self- lock Strong Power For iPhone Huawei Android Phones Tablets Opening Repair. Xiaodong P1 Brushless Electric Screwdriver For Huawei Android Phones Tablets Repair. Xiaodong P2 Electric Screwdriver For Apple iPhone Android Phones Tablets Repair. Professional screwdriver used by Huawei after-sales and Apple after-sales repair outlets. Main difference between Xiaodong P1 and P2 electric screwdriver: 1. P1 is designed for Android phones and computers, its power is relatively large, and it's not the best screwdriver to disassemble Apple iPhone. 2. P2 is for Apple iPhone and Android phones, two versions: for Android and for Apple. 3. The charger is the same, and the bits are the same, but the P2 is equipped with fewer bits than the P1, and the motor power inside is different. Xiaodong P2 electric screwdriver features: 1. Xiaodong P2 has two versions, one is specifically for Apple iPhone, and the other is specifically for Android phones and laptops. 2. Xiaodong P2 (iPhone version) with 7pcs replaceable bits, Xiaodong P2 (Android version) with 10pcs replaceable bits torque-limited self-lock and strong power. 3. Wireless and ergonomic design, easy to use and carry. 4. Xiaodong P2 uses a coreless brush motor, long life, silent, accurate torque. 5. P2 screwdriver adopts electronic torque limiting mode (electronic brake), the brake is stable, it is not easy to damage the motherboard and screws, and it has a buzzer prompt sound. 6. High and stable concentricity effectively ensures that the screws do not slip. 7. Built-in 18650 power lithium battery, 2500mAh large capacity, stable charge and discharge, with two-way protection, normal working time can reach 10-15 days. 8. There are three gears to adjust, and the torque of each gear is calibrated one time at the factory, so there is no need to repeat the calibration. 9. OLED screen displays gear and power. 10. There are work lights that can be turned on/off. Xiaodong P1 electric screwdriver features: 1. Xiaodong P1 with 10pcs replaceable bits, torque-limited self-lock and strong power. 2. Wireless and ergonomic design, easy to use and carry. 3. Xiaodong P1 uses a coreless brushless motor, long life (from 10000 hours), silent, accurate torque. 4. P1 screwdriver uses electronic torque limiting (electronic brake), the brake is stable, and it is not easy to damage the motherboard and screws. 5. High and stable concentricity effectively ensures that the screws do not slip. 6. LG21700 lithium battery, 4800mAh large capacity, stable charge and discharge, two-way protection, normal working time up to 15-30 days. 7. There are three gears to adjust, and the torque of each gear is calibrated one time at the factory, so there is no need to repeat the calibration. Xiaodong P1 P2 electric screwdriver uses the same base: 1. Place and fix the P1 P2 electric screwdriver. 2. The bottom surface has non-slip silicone, which is not easy to slide and stable when placed on the desktop. 3. There are built-in magnets on all sides, which can be attached to the removed screws during disassembly, and some commonly used small parts or bits can also be adsorbed on it, which is not easy to lose and easy to find. 4. Place it on the top of the table beautifully and not messy.

Contact:
Phone:
Fax:
Email:
phonefix


Send Inquiry
Shenzhen Weike Repair Technology Co., Ltd.
Room 601, Floor 6, Building 7, No. 9 Qilin Road, Nankeng Community, Bantian Street, Longgang Distric
Longgang District, Shenzhen City
China
12/20/23 2:51 GMT
Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg

Product Description Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg Yaskawa YASKAWA-UP6 is a small industrial robot with a load of 6kg. It was produced and launched by Japan Yaskawa Shougang Robot Company in 2001-2003. It is mainly used in arc welding, packaging and other fields. Yaskawa UP6 has the following characteristics. 1. Takt time shortened Yaskawa UP6's new compact wrist is equipped with a powerful motor, which can move quickly and reliably without getting in the way of the swinging cable, and maintain the speed at all times. 2. Excellent welding quality Arc welding applications have increasing requirements for high quality and consistent quality, which requires improved wire feeding control near the arc to ensure high-volume production. As an arc welding robot, Yaskawa UP6 has a stronger and stronger upper arm with a load of 6kg, which can handle heavier welding torches. The repeating path accuracy can reach 0.06mm, presenting a satisfactory welding effect. 3. High reliability Fast, agile and reliable loading and unloading The Yaskawa UP6 robot can move with large acceleration and speed without damaging other parts, so the compact hollow wrist can move quickly and reliably, while also eliminating the risk of collision in a confined space. Brand Yaskawa Installation method floor, upside down Body weight 130kg Repeatability ±0.06mm Working range 1373mm Model UP6 Payload 6kg Place of Origin Japan Condition Used Yaskawa Robot Application fields welding, cutting, loading and unloading, handling, etc. Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg 0 Second Hand 6 Axis Yaskawa Robot UP6 Working Range 1373mm Payload 6kg 1

Contact:
Phone:
Fax:
Email:
Mr. Tony
86-181-23897892
86-181-23897892
Send Inquiry
Changsha Pengju Robot Co., Ltd.
Building B7, Liandong Jinyu Industrial Center, No. 308, Section 2, Maqiaohe Road, Wangcheng District, Changsha City, Hunan Province
Changsha 410000
China
12/19/23 8:57 GMT
JCID Wide Angle Camera Tag-On Repair FPC For iPhone 12-14 Pro Max Save $45.

JCID rear camera tag-on repair FPC flex cable works with JCID 13-14 Rear Camera Radar Read Write Adaptor and JCID wide angle camera module for iPhone 12-14 Pro Max rear camera repair, which solves iPhone rear camera code matching and pop-up issues caused by non-genuine iPhone rear cameras. JCID Tag-on Rear Camera Repair Flex Cable disassembly-free cable fixes iPhone camera without soldering.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
phonefix


Send Inquiry
Shenzhen Weike Repair Technology Co., Ltd.
Room 601, Floor 6, Building 7, No. 9 Qilin Road, Nankeng Community, Bantian Street, Longgang Distric
Longgang District, Shenzhen City
China
12/15/23 6:39 GMT
PLC 1756-EN2TR 5570 EtherNet/IP MODULE

PRODUCT DESCRIPTION Description PLC 1756-EN2TR 5570 ETHERNET/IP MODULE Product details Model 1756-EN2TR Brand PLC Description ControlLogix 5570 Module Datasheet/Catalogue PDF File Weight 0.5KG Condition Normal Product Description The ControlLogix® controller provides a scalable controller solution that is capable of addressing a large amount of I/O points. The ControlLogix controller can be placed into any slot of a ControlLogix I/O chassis and multiple controllers can be installed in the same chassis. ControlLogix controllers can monitor and control I/O across the ControlLogix backplane, as well as over network links. To provide communication for a ControlLogix controller, install the appropriate communication interface module into the chassis. Application 1.Power industry, the elevator industry, parking, automobile, auto ancillary. 2.feed industry, aluminum smelting machines, refrigeration industry. 3.steel industry, combustion control systems, non-ferrous metal smelting. 4.glass industry, construction machinery, textile machinery, water treatment PLC 1756-EN2TR 5570 EtherNet/IP MODULE 0 Mainly Products PLC module Redundancy Module DCS module Analog input module CPU module Analog output module IO module Digital input module DO module Digital output module AI module Relay Output Module DI module Relay Input Module Power Module Motion control module Ethernet module Network communication module Best Services Assurance 1.High quality 2.Fast Delivery 3.We provide a large number of brand new in stock. 5.There are many products in stock. 6. We only provide the original new items, 100% make sure the best quality! PLC 1756-EN2TR 5570 EtherNet/IP MODULE 1 PLC 1756-EN2TR 5570 EtherNet/IP MODULE 2 RELATED SPOT PRODUCTS 6ES5452-8MR11 FBM203 RH914SV FC-BSDOL-04UNI 6ES5316-8MA12 FBM201 RH914SQ FC-SDO-0824 6EP1333-2BA20 FBM207 P0914TD FS-SICC-0001/L3 6EP1333-3BA10 FBM240 P0917GZ FS-SICC-0001/L8 6EP1334-2BA20 DSMB-01C FC-IO-0001 6EP1334-2AA01 DSMB-02C TP-DSOEP1-100 6EP1337-3BA00 DSSB-01C 51304754-150 6EP1437-2BA20 DSCB-01C IC660BBS102 6EP1437-3BA00 TC-IAH161 IS200ERDDH1A 1C31197G05 TC-OAV081 IS215UCVGH1A 1C31194G04 5069-L306ER IS200EPSMG2A 1C31192G01 MVI56-PDPMV1 P0926KM 1C31189G03 RH924YL P0922YC 1C31116G05 3BDH000013R1 P0922YU 1C31206G01 3BSE076355R1 RH924WA 1C31113G05 3BDH000723R1 RH924UQ Our Company Wuhan Sean Automation Equipment Co.,Ltd established for over 6 years, believes in providing the best quality,we offer and deliver products worldwide.As a factory automation wholesale distributor,we provides quality new parts along with quality on everything we carry. We offer a minimum one-year warranty on all products.satisfied for customers are to our purpose.we have been committed to providing quality parts and equipment at the right price and right time to every clients.Many parts are stocked and available with very short lead times to ensure yourparts are available when you need them. PLC 1756-EN2TR 5570 EtherNet/IP MODULE 3

Contact:
Phone:
Fax:
Email:
Mr. Tony Yung
86-153-77040647
86-153-77040647
Send Inquiry
Wuhan Sean Automation Equipment Co.,Ltd
Fanhai International SOHO , Huaihai Road, Jianghan District, Wuhan 430023.
Wuhan 430023
China
12/14/23 6:14 GMT
Three Axis Quartz Accelerometer

ER-3QA-02D (1×10-4~2×10-4g) Features: 1. High Precision 3-Axis; 2. Digital output; 3. Low power consumption. ER-3QA-02D High Precision Three Axis Quartz Accelerometer Introduction ER-3QA-02D High Precision Three Axis Quartz Accelerometer with high precision,is composed of three A15 acceleration sensors, 24bit high precision A/D converter, 16 bit ultra low power consumption single chip microcomputer and mechanical structure. ER-3QA-02D features the digital output, high precision installation error, temperature compensation and low power consumption.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Roro Yang
13991957586
029-88767352
Send Inquiry
Shaanxi Ericco Inertial System Co., Ltd
Room 1,2100, Building 1, Ruixin Building, No.25 Gaoxin Road, Gaoxin District
Xi'an
China
12/14/23 4:02 GMT
Fanuc Industrial Robot Arm R-2000iC/125L Robotic Manipulator Palletizer For

PRODUCT DESCRIPTION Fanuc Industrial Robot R-2000iC/125L Robotic Manipulator Palletizer For Palletizing With Customized Gripper Product Description: The FANUC R-2000iC/125L is an excellent choice for palletizing applications due to its high payload capacity, advanced motion control technology, and large work envelope. Its precise and smooth movements, coupled with vision- guided capabilities, make it efficient and reliable for handling heavy loads and stacking pallets. Technical Parameters: Parameter Value Application Welding/ Palletizing/ Handling Type Industrial Robot Arm Mounting position Floor Motion Range 360° Material Aluminum Alloy Controller R-30iB Plus Weight 1115kg Warranty 1 Year Speed 2.2m/s Axes 6 Keywords CNGBS, 6 Axis, CNGBS Robot, Multi-joint Robotic Arm Customization: Industrial Robot Arm – Fanuc R-2000iC/125L Features: Brand Name: Fanuc Model Number: R-2000iC/125L Place of Origin: China Minimum Order Quantity: 1 Price: 25000~30000 Packaging Details: With Wooden Box Delivery Time: 5-8 Week Payment Terms: T/T Supply Ability: 30PCS/30Day Mounting position: Floor Power Supply: 200-240V Controller: R-30iB Plus Motion Range: 360° Weight: 1115kg Applications: Industrial Robot 6 Axis Robot Fanuc Robot Support and Services: Industrial Robot Arm Technical Support and Service We provide technical support and service for our Industrial Robot Arm product. Our team of qualified technicians are available to help you with any questions or issues you may have with your robotic arm. We provide on-site installation and maintenance services for our robot arms. We also offer remote diagnostic services, so you can get help quickly and easily. We also provide spare parts and consumables, so you can keep your robot arm running smoothly. We also provide training and education services to help you get the most out of your robot arm. We offer courses and tutorials for both experienced and inexperienced users, so you can learn the basics and advanced features of our robot arms. If you need any help with your robot arm, please don't hesitate to get in touch with us. Our team is here to help you get the most out of your robotic arm. Fanuc Industrial Robot Arm R-2000iC/125L Robotic Manipulator Palletizer For Palletizing 0Fanuc Industrial Robot Arm R-2000iC/125L Robotic Manipulator Palletizer For Palletizing 1Fanuc Industrial Robot Arm R-2000iC/125L Robotic Manipulator Palletizer For Palletizing 2Fanuc Industrial Robot Arm R- 2000iC/125L Robotic Manipulator Palletizer For Palletizing 3Fanuc Industrial Robot Arm R-2000iC/125L Robotic Manipulator Palletizer For Palletizing 4

Contact:
Phone:
Fax:
Email:
Mr. Edward
86-151-21023088
86-151-21023088
Send Inquiry
Xiangjing (Shanghai) M&E Technology Co., Ltd
19-20th Floor, No.399 Zhongren Road, Jiading District, Shanghai, China
Shanghai 200000
China
12/12/23 3:25 GMT
Triaxial Quartz Accelerometer

ER-3QA-02E (3×10-5~1×10-4g) Features: 1. High performance 3-Axis; 2. Digital output; 3. Low power consumption. Introduction ER-3QA-02E High Performance Triaxial Quartz Accelerometer with high performance,is composed of three A15 acceleration sensors, 24 bit high precision A/D converter, 16 bit ultra low power consumption single chip microcomputer and mechanical structure. ER-3QA-02E has the features of digital output, high precision installation error, temperature compensation and low power consumption.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Roro Yang
13991957586
029-88767352
Send Inquiry
Shaanxi Ericco Inertial System Co., Ltd
Room 1,2100, Building 1, Ruixin Building, No.25 Gaoxin Road, Gaoxin District
Xi'an
China
12/12/23 2:53 GMT
TFT HMI Touch Panel OP277 6AV6643-0BA01-1AX0 6 " Operator Panel

PRODUCT DESCRIPTION 6AV6643-0BA01-1AX0 HMI Touch Panel SIMATIC OP277 6 "Siemens Operator Panel SIMATIC OP 277 6 "Operator Panel 5.7" TFT Display 4MByte Project Configuration Memory, project configurable, utilizing WinCC flexible 2005 Standard Edition SP1 Product Type Mark OP 277 Display screen specifications TFT Screen Diagonal 5.7 in Number of Colors 256 Environmental temperature during operation 0 °C-50 °C Pre installed operating system Windows CE Configurator WinCC flexible standard for 2005 SP 1 and above (separately covered) Status/Control In SIMATIC S7 Configuration transfer MPI/PROFIBUS DP, USB, Ethernet, automatic recognition transmission TFT HMI Touch Panel OP277 6AV6643-0BA01-1AX0 6 " Operator Panel 0TFT HMI Touch Panel OP277 6AV6643-0BA01-1AX0 6 " Operator Panel 1TFT HMI Touch Panel OP277 6AV6643-0BA01-1AX0 6 " Operator Panel 2TFT HMI Touch Panel OP277 6AV6643-0BA01-1AX0 6 " Operator Panel 3

Contact:
Phone:
Fax:
Email:
Mr. HE
86-158-74008505
86-158-74008505
Send Inquiry
Changsha Honglicheng Electric Co. , Ltd.
Building H23, Sudiano, Nanshan, Wangcheng District, Changsha City, Hunan Province
Changsha 410000
China
12/11/23 11:27 GMT
JCID UFS programmer U15 BGA153/254/297 3-in-1 reading and writing tool

JCID UFS programmer U15 box is suitable for BGA153 BGA254 BGA297 UFS2.X 3.X 4.X NAND chip identification reading and writing. UFS programmer U15 has USB3.0 high-speed transmission and smart power supply automatically adapts to UFS2.X 3.X 4.X Nands. Features: 1. The UFS 3-in-1 rear write socket is 153 254 297. 2. 180M/S reading speed, 350M/S writing speed. 3. The smart power supply automatically adapts to UFS2.X 3.X 4.X Nands. 4. Identify Nand and automatically read Nand information. 5. Support online upgrades and experience the latest industry technologies and functions at any time.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
phonefix


Send Inquiry
Shenzhen Weike Repair Technology Co., Ltd.
Room 601, Floor 6, Building 7, No. 9 Qilin Road, Nankeng Community, Bantian Street, Longgang Distric
Longgang District, Shenzhen City
China
12/7/23 8:55 GMT
300W 220V Ceramic Pellet Igniter Resistance Lighter Φ 10.5mm

Product Description Pellet Igniter Resistance Lighter 300W 220V Φ 10.5mm One special application area for Kairui's high temperature ceramic igniters is in heating systems that use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very short time while retaining very low emission values. This can be perfectly achieved by Kairui's hot surface igniters. 300W 220V Ceramic Pellet Igniter Resistance Lighter Φ 10.5mm 0 Ceramic Igniter for pellet stoves, designed to ignite wood pellets and wood chips in stoves, boilers and burners. Tested for more than 10,000 ON/OFF cycles, with rapid ignition times. Specification Product Name Pellet Igniter Resistance Lighter 300W 220V Φ 10.5mm Size φ10.5*106mm Voltage 220V Power 300W Flange Brass G3/8 screw Cable 300-800mm Lead In a ф 0. 5mm of Nickel wire(The length depends on the customer) Application Pellet boiler, Pellet stove Advantage * Long life, Free replacement within 2 years * No leakage when working continuossly. * Timing of ignition with 90 seconds. * On-off 10,000 cycle without fault. * OEM order are available for all kinds of igniter. Application * Wood pellet burner /Wood chips burner /Straw burner /Other biomass burner; * 3D prinert * Industrial drying equipment, electric Bonding liquid heater; * Medical devices and other precise instrument. Our service 1. OEM Manufacturing welcome: Product, Package... 2. Sample order 3. We will reply you for your inquiry in 24 hours. 4. After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you. Company profile Kairui Company specialises in ceramic hot surface igniters and has many years experience of working closely with customers to develop bespoke solutions for innovative appliance manufacturers. Kairui are a trusted manufacturer of hot surface ceramic ignition products to many industry sectors. If you want to know about our products, we can also provide samples. Welcome friends and customers at home and abroad to visit the factory. We have many products in stock, if you want to buy wholesale, you can contact us.

Contact:
Phone:
Fax:
Email:
Miss. Monica
86-29-81292786
86-029-88240199
Send Inquiry
Shaanxi Kairuihongxing Electronic Co., Ltd.
B Area Plant, Productivity building 3rd floor ,Electronic Industrial Park,Yanta District, Xi'an, ShaanXi,China
Xi'an 710000
China
12/6/23 3:45 GMT
Anti Vibration Quartz Accelerometer

ER-QA-02B (100μg) Features: 1. Anti-vibration Performance; 2. High Temperature; 3. Specially applied for Oil & Gas Fields. Applications ER-QA-02B Anti-Vibration & High-Temp Accelerometer For Oil & Gas Field is specially applied for continuous north seeking systems, also can be widely used in other harsh working conditions. Features Anti-vibration High accuracy

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Roro Yang
13991957586
029-88767352
Send Inquiry
Shaanxi Ericco Inertial System Co., Ltd
Room 1,2100, Building 1, Ruixin Building, No.25 Gaoxin Road, Gaoxin District
Xi'an
China
12/5/23 8:39 GMT
Compact Servo Electric Gripper

PRODUCT DESCRIPTION Servo Electric Gripper High Rigidity,Drop Lock,Drop Detection RM-GB-11-40-2- 1-H-ITG Servo Clamping Jaws (RM-GB-11-40-2-1-H-ITG) is a high performance product that demonstrates outstanding performance with efficient control and powerful clamping force. It has outstanding advantages such as high rigidity, high load, high precision, high reliability, etc., and can adapt to various complex working environments; from compact to heavy-duty type, it provides a variety of optional strokes, with a wide range of specifications to meet different needs; it can be adapted to a variety of collaborative robots and industrial robots, to complete various types of assembly, transport, palletising, etc., of items of different weights. The RM-GB has a clamping stroke of 40mm, a guide length of 2, a side exit position and a horizontal exit. With a maximum payload of up to 7kg, which is 2-3 times its own weight, and a maximum clamping force of 110N, the RM-GB is in a class of its own. It can easily cope with both bulky, heavy heavy items and delicate, lightweight miniature items. It has a service life of up to 10 million cycles, even under extreme loads, without failure and with first-class stability. Specifications Output Cable: Side Wiring Outgoing Line Method: Horizontal Wiring Max.speed (mm/s): 80 Repeat Positioning Accuracy (mm): ± 0.05 Backlash (mm): < 0.1 ( Single-Side) Permissible Load Torque: MR: 8.0, MP: 5.9, MY: 5.9 Control Method Bus: Modbus RTU/ CANopen Control Method Interface: I/O Interface: Input 2 Points(NPN), Output 3 Points( NPN) Rated Voltage (V): DC24± 10 % Rated Current(A): 2 Weight (kg): 1.1 Usage Environment: 0~40℃, < 85%RH ( Without Condensation) Protection Class IP: IP 40 1.The data is sourced from the actual test results in the 25℃ laboratory.Notes: 2.The drawings provided in this Catalogue are for the default standard model. If you require other models with different motor directions, outlet directions, or outlet methods, please contact your local sales representative to obtain the drawings for the optional models. Compact Servo Electric Gripper 0

Contact:
Phone:
Fax:
Email:
Mr. Jonny Huang
86-757-22205682
86-757-22205682
Send Inquiry
Foshan Augmented Intelligence Technology Co., Ltd
RobustMotion Tech Building, No.20, Shunxiang Rd., Daliang St., Shunde District. Foshan, GD, PRC
Foshan 528000
China
12/1/23 2:14 GMT
High-Precision and Anti-Vibration Quartz Accelerometer for Aerospace

ER-QA-02A: 1. Bias repeatability: 60μg; 2. Scale factor repeatability: 60ppm; 3. Class II non-linearity repeatability: 50μg/g2. Application ER-QA-02A High-Precision and Anti-Vibration Quartz Accelerometer for aerospace is suitable for the environment which has high requirement of circumstance and precision.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Roro Yang
13991957586
029-88767352
Send Inquiry
Shaanxi Ericco Inertial System Co., Ltd
Room 1,2100, Building 1, Ruixin Building, No.25 Gaoxin Road, Gaoxin District
Xi'an
China
11/29/23 9:00 GMT
8-18kW High Voltage Coolant Heater Without Bracket DC 690V

AZ02-Series (8-18kW)Nominal Voltage DC690V High Voltage Coolant Heater Without Bracket Our High Voltage Coolant Heater is a cutting-edge heating system designed specifically for high-voltage electric vehicles. This innovative heater efficiently warms the coolant in the vehicle's cooling system, ensuring optimal performance in cold weather conditions. 8-18kW High Voltage Coolant Heater Without Bracket DC 690V 0 HVCH AZ02 Series is a slender but powerful electric water heater, whose maximum power being up to 18KW. Unlike the AS series, the AZ02 series doesn't need outgoing line. More convenient installation, more concise structure. A special lead wire is used for Ground, the length could be customized. If the customers need different voltage or power, please contact customer service. HVCH AZ02-Series could quickly, consistently,powerfully and reliably heat the vehicle or battery interior. The compact device ensures a constantly high heat output of 8kW-18kW and allows for flexible use in a power range of 350 to 870 Volts. HVCH AZ02-Series features infinitely variable heat output control by means of an integral control unit. This takes place either by regulating the water outlet temperature or by limiting the maximum heat output or power consumption. Furthermore, it is CAN-capable and transmits key operating data to the vehicle system using an intelligent diagnostic function. Specification: HVCH AZ02 Series Heat Output 8-18kW HV Voltage Range DC 350-870V LV Voltage DC 24V or 12V nominal Efficiency > 95 % Controllability Steps 100W Dimensions 340*110*113mm Weight 10kg Temperature Range for Heating -40 to 90 ℃ Temperature Range for Ambient -40 to 125 ℃ Communication CAN or LIN2.1 Dielectric Strength 3500 V (DC) IP Protection Class IP 67 EMC ECE R10 Rev. 5 Insulation Resistance >500MΩ Service Life 10 years or 10,000 heating hours 8-18kW High Voltage Coolant Heater Without Bracket DC 690V 1 Product Features: Ø Excellent Water Resistance. During the actual operation, muddy roads and wet rainy days and long playing in high temperature, all require our high voltage coolant heater excellent waterproof performance.IP 67 Water and dust proof reports can be provided. Ø Stepless Regulate Performance. This takes place either by regulating the water outlet temperature or by limiting the maximum heat output or power consumption.Our High Voltage coolant heater has been equipted in thousands of vehicles for three years ,the good quality has been accecpted by the custmers. Ø Reliable Self-Protection System The protection system includes mechanical protection device and electronic protection, which acts to shut the module down in reaction to a short circuit, overload, or over-temperature condition. In addition, We add the current fuse in the high voltage circuit.In addition to the temperature sensor, there is also a mechanical temperature switch inside. Ø Completely Separation of Water and Electricity Water and electricity is completely separated.Different from other manufacturers,we solve perfectly the contradiction between the heat transmission efficiency with the Insulation requirement of DC 3500 V.Benefits from this technical improvement, our 870V (nominal voltage) products have been mass produced and used in heavy dump trucks in 2021. Ø PTC thermistor heater with self-controlled constant temperature. PTC water coolant heater come with all advantages of the PTC heating technology. Thanks to the PTC effect, the heating elements dynamically adjust their power without exceeding a maximum temperature. High operational reliability and energy efficiency without any additional switching elements. 8-18kW High Voltage Coolant Heater Without Bracket DC 690V 2 Application: To guarantee a safe journey even in challenging climate conditions, vehicles must be ready for operation right from the start. Sufficient power of 25 to 35kw can meet the heating, defrosting, battery heating and other needs of large vehicles. Users can adjust the power according to the demand, control the power consumption. We also provide customized service, which can be adjusted according to customer requirements, such as voltage, power, etc 8-18kW High Voltage Coolant Heater Without Bracket DC 690V 3 Why Choose EVLINK's PTC Heater Championing Sustainability EVLINK is not just a brand but a movement towards a greener future. Committed to promoting sustainability, EVLINK is on a mission to reduce the carbon footprint through products that are not only energy-efficient but also contribute to the global initiative of fostering a healthier and more sustainable planet. Safety Like No Other Safety isn't just an add-on feature at EVLINK, it's a fundamental aspect ingrained in every product designed. By integrating dual control systems and high-voltage fuses, EVLINK assures the safe operation of its products, safeguarding both the equipment and its users, and fostering a secure environment in every application.

Contact:
Phone:
Fax:
Email:
Mr.
86-180-12651907
86-180-12651907
Send Inquiry
Suzhou EVLINK Electronic Technology Co.,Ltd
Suzhou,Jiangsu
Suzhou 215000
China
11/28/23 4:01 GMT
PLC 1756-EN2TR 5570 EtherNet IP MODULE

Description PLC 1756-EN2TR 5570 ETHERNET/IP MODULE Product details Model 1756-EN2TR Brand PLC Description ControlLogix 5570 Module Datasheet/Catalogue PDF File Weight 0.5KG Condition Normal Product Description The ControlLogix® controller provides a scalable controller solution that is capable of addressing a large amount of I/O points. The ControlLogix controller can be placed into any slot of a ControlLogix I/O chassis and multiple controllers can be installed in the same chassis. ControlLogix controllers can monitor and control I/O across the ControlLogix backplane, as well as over network links. To provide communication for a ControlLogix controller, install the appropriate communication interface module into the chassis. Application 1.Power industry, the elevator industry, parking, automobile, auto ancillary. 2.feed industry, aluminum smelting machines, refrigeration industry. 3.steel industry, combustion control systems, non-ferrous metal smelting. 4.glass industry, construction machinery, textile machinery, water treatment PLC 1756-EN2TR 5570 EtherNet IP MODULE 0 Mainly Products PLC module Redundancy Module DCS module Analog input module CPU module Analog output module IO module Digital input module DO module Digital output module AI module Relay Output Module DI module Relay Input Module Power Module Motion control module Ethernet module Network communication module Best Services Assurance 1.High quality 2.Fast Delivery 3.We provide a large number of brand new in stock. 5.There are many products in stock. 6. We only provide the original new items, 100% make sure the best quality! PLC 1756-EN2TR 5570 EtherNet IP MODULE 1 PLC 1756-EN2TR 5570 EtherNet IP MODULE 2 RELATED SPOT PRODUCTS 6ES5452-8MR11 FBM203 RH914SV FC-BSDOL-04UNI 6ES5316-8MA12 FBM201 RH914SQ FC-SDO-0824 6EP1333-2BA20 FBM207 P0914TD FS-SICC-0001/L3 6EP1333-3BA10 FBM240 P0917GZ FS-SICC-0001/L8 6EP1334-2BA20 DSMB-01C FC-IO-0001 6EP1334-2AA01 DSMB-02C TP-DSOEP1-100 6EP1337-3BA00 DSSB-01C 51304754-150 6EP1437-2BA20 DSCB-01C IC660BBS102 6EP1437-3BA00 TC-IAH161 IS200ERDDH1A 1C31197G05 TC-OAV081 IS215UCVGH1A 1C31194G04 5069-L306ER IS200EPSMG2A 1C31192G01 MVI56-PDPMV1 P0926KM 1C31189G03 RH924YL P0922YC 1C31116G05 3BDH000013R1 P0922YU 1C31206G01 3BSE076355R1 RH924WA 1C31113G05 3BDH000723R1 RH924UQ Our Company Wuhan Sean Automation Equipment Co.,Ltd established for over 6 years, believes in providing the best quality,we offer and deliver products worldwide.As a factory automation wholesale distributor,we provides quality new parts along with quality on everything we carry. We offer a minimum one-year warranty on all products.satisfied for customers are to our purpose.we have been committed to providing quality parts and equipment at the right price and right time to every clients.Many parts are stocked and available with very short lead times to ensure yourparts are available when you need them. PLC 1756-EN2TR 5570 EtherNet IP MODULE 3

Contact:
Phone:
Fax:
Email:
Mr. Yang
86-153-77040647
86-153-77040647
Send Inquiry
Wuhan Sean Automation Equipment Co.,Ltd
Fanhai International SOHO , Huaihai Road, Jianghan District, Wuhan 430023.
Wuhan 430023
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   << Previous   |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   10  |   11  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2024 IMEXBB.com. All rights reserved.

IMEXBB.com