Other Machinery & Parts

Dimensions: ASME/ANSI B16.5, ASME B16.47, GOST 12820, EN1092, GOST 12821, GOST 33259 What is a threaded flange? A forged threaded flange（also called companion flanges/screw flanges / NPT flanges/TH flanges） is a type of pipe flange that features internal threads on its bore, allowing it to be directly screwed onto the external threads of a pipe. This design eliminates the need for welding, making it a convenient choice for pipes that cannot be welded or in situations where welding is not desirable. Key Features & Applications 1. Welding-Free Connection – Perfect for explosive or flammable environments (e.g., petrol stations, chemical plants) where welding sparks pose a risk. 2. Easy Installation & Maintenance – Can be quickly assembled or disassembled compared to welded flanges. 3. Cost-Effective for Small Pipes – Typically used for ½” to 6” pipes, though larger sizes (up to 24”) are available upon request. The amount of additional machining and labor hours that go into producing a larger diameter threaded connection makes them less popular than slip-on flanges or weld neck flanges. 4. Limited to Low-Pressure/Low-Temperature Use – Best suited for non-toxic fluids and moderate conditions, as threads may weaken under high heat or pressure. 5. Face Types – Only available with flat face (FF) or raised face (RF) finishes, not suitable for high-pressure ring-type joints. Specification: Standard: ASNI/ASTMB16.5 / 16.36/16.47A/16.47B B2220 – 2001, DIN2527/2636/2637/2638/2566/2576/2633/2635/264 , 2/2653/2655. Pressure Rate: 150LBS to 2500LBS / PN10 to PN400 Dimension: 1/2″ to 48″ Material: Carbon steel, Alloy Steel, Stainless steel. Thread type: NP / BSP Pressure rating: class 150LBS、300LBS、400LBS、600LBS、900LBS、1500L , BS、2500LBS Dimensions: ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48, API 605, AWWA AND DRAWING Material: CS Stan , dard: ASTM / ASME A/SA 105 / 350 LF 2 SS Standards: ASTM / ASME A/SA 182 AS Standard: ASTM / ASME A/SA 182 How to install a threaded flange? Clean the pipe threads and the inside of the flange to ensure a secure and leak-free connection. Align the threaded flange with the pipe and screw it onto the pipe’s threaded end by hand until it is snug. Use a wrench to further tighten the flange onto the pipe. Be careful not to over-tighten, as this can damage the threads or pipe. Optionally, use thread sealant or Teflon tape to prevent leaks in lower-pressure systems, ensuring a tight seal. Choose JS Fittings as your Threaded Flanges Supplier With 40+ years of experience in steel flange manufacturing, JS Fittings provides: 1. High-quality carbon steel, stainless steel, and alloy threaded flanges 2. Custom sizes and pressure ratings (ASME, ANSI, DIN, and more) 3. Fast delivery & expert technical support Contact Us for a quote or project consultation—we help you source flanges faster, smarter, and more affordably than competitors!

Minimum Order: 100

Support sample making, sample customization, large-scale machining factory, advanced technology, uniform, no scratches, smooth surface, no convex points, no abnormal corners

Support sample making, sample customization, large-scale machining factory, advanced technology, uniform, no scratches, smooth surface, no convex points, no abnormal corners

Support sample making, sample customization, large-scale machining factory, advanced technology, uniform, no scratches, smooth surface, no convex points, no abnormal corners

Today, we’d like to introduce a hydraulic screw-in cartridge direct-acting proportional relief valve equivalent to Rexroth KBPS. It is a direct-acting proportional relief valve (pilot control valve) to limit system pressure. Technical parameters of AAK E-KBPS Hydraulic Direct-acting Proportional Relief Valve: Max. Operating Pressure: 420 bar (6000 psi) Max. Permissible Return Pressure (main port 2): 210 bar (3000 psi) Max. Flow Rate: 2 L/min (0.5 gpm) Cavity: T-8A The advantages of AAK Hydraulic Direct-acting Proportional Relief Valve E-KBPS are: 1. The quality of this valve is benchmarking Bosch Rexroth, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China. Welcome to try it out, you will be satisfied with its quality and performance! AAK HYDRAULIC VALVES (852) 2025-08-27

Minimum Order: 1 bags

Maintains optimal refrigerant pressure levels within the vehicle's air conditioning system.​ Converts high pressure, high temperature refrigerant into liquid state for efficient cooling.​ Integrates with the compressor and evaporator to complete the refrigeration cycle in cars.​ Enhances the overall performance and efficiency of automotive air conditioning systems.​ Helps regulate temperature inside the vehicle cabin by cooling the refrigerant effectively. Premium Automatic A/C Condenser Fits Toyota Corolla with OEM numbers: 884502330, 88450-12280, 88450-02280, 8845002280. Made with high-quality materials for excellent heat dissipation, ensuring stable A/C performance and long service life. Easy installation and perfect fit – an ideal OEM replacement part. For more information and special offers please contact: Tel:+86 0516 85080061 Phone: +86 17751059021 (whatsapp) Email:support@okcarpart.com Web:w , ww.okcarpart.com

Minimum Order: 1 bags

JPT M7 series high poweredpulsed fiber lasers make use of master oscillator power amplifier (MOPA) configuration, and show excellent laser performance as well as high level of temporal pulse shaping controllability. As compared to the Q-switching technology, the pulse repetition frequency (PRF) and pulse width can be controlled independently in MOPA configuration, through adjusting different combination of the above parameters, the peak power of laser can be well maintained. And enable JPT laser suitable for more material processing which Q-switch limited.The higher output power makes its advantages especially in high speed marking applications. Sheet metal cutting, Welding Scribing, Drilling Laser rust removal Surface treatment Metal surface processing, Peeling coating Marking on fly

Are you in need of high-quality XPS foam products for your construction or insulation projects? Look no further than our state-of-the-art XPS foam manufacturing plant. With years of expertise in the industry, we are proud to offer top-of-the-line XPS foam products that meet a wide range of needs. At our XPS foam manufacturing plant, we use the latest technology and equipment to ensure that our products are of the highest quality. Our XPS Extrusion Line allows us to produce foam with superior thermal performance, making it ideal for a variety of applications. Whether you need insulation for a residential or commercial building, our XPS foam products are the perfect solution. One of the key benefits of XPS foam is its durability and resistance to moisture, making it an excellent choice for areas with high humidity or moisture levels. Additionally, our XPS foam products are environmentally friendly and recyclable, making them a sustainable choice for your projects. When you choose our XPS foam manufacturing plant, you can trust that you are getting top-notch products that have been manufactured with precision and care. Our team of experienced professionals is dedicated to delivering the best products possible, ensuring that your projects are completed to the highest standards. With our commitment to expertise, experience, authoritativeness, and trustworthiness, you can be confident that our XPS foam products will meet and exceed your expectations. Contact us today to learn more about how our XPS foam products can benefit your next project. Choose our XPS foam manufacturing equipment for all your insulation needs. Whether you are in Moldova, Puerto Rico, Kiribati, Palestine, Lebanon, or anywhere else in the world, our high- quality XPS foam products are the perfect choice for your construction or insulation projects.

Gypsum powder production plant plays a crucial role in various industries, providing high-quality gypsum powder for a wide range of applications. If you are in need of a reliable supplier for gypsum powder production, look no further than our state-of-the-art facility. Our gypsum powder production plant is equipped with cutting-edge technology and operated by a team of experienced professionals who ensure the highest quality standards are met. We follow strict quality control measures throughout the production process to guarantee that our gypsum powder is of the finest grade. Gypsum powder is used in construction, agriculture, and food industries, among others. It is known for its fire-resistant and soundproofing properties, making it a popular choice for building materials. Additionally, gypsum powder is used as a soil conditioner in agriculture to improve crop yields. In the food industry, it is used as a thickening agent in products like tofu and soups. Our gypsum powder production line is capable of producing large quantities of gypsum powder to meet the demands of our customers. Whether you are in Azerbaijan, East Timor, Senegal, Latvia, India, or anywhere else in the world, we can provide you with high- quality gypsum powder for your specific needs. At our gypsum powder production plant, we prioritize expertise, experience, authoritativeness, and trustworthiness to ensure that our customers receive the best products and services. We have established a strong reputation in the industry for our reliability and commitment to customer satisfaction. If you are looking for a reliable supplier of gypsum powder production, contact us today to learn more about our services. Trust us to provide you with top-notch gypsum powder that meets your specifications and exceeds your expectations. Let us be your go-to source for all your gypsum powder needs.

Gypsum Board Machinery is also called gypsum board production equipment. Gypsum board production line refers to all special production equipment used in gypsum board production equipment, covering raw material supply system, plate making system, conveying system, transverse system, drying system, plate ejection system, cutting system, etc. side system. The characteristics of the gypsum board machine are small equipment, high product profits, cost recovery in a short time, no pollution, and waste can be recycled and reused. The gypsum board production line is also an environmentally friendly project. The manufacturing process of gypsum board is simple and easy to learn, and the raw materials come from a wide range of sources, making it an ideal choice for building materials projects.

Gypsum can be a difficult material to work with due to its variability, tendency to harden into a cement-like form, and its abrasive nature. Therefore, choosing a heavy-duty handling solution designed for the unique characteristics of the gypsum sample to be treated will provide the best results. Wuxing has always been committed to providing the highest quality custom Drywall Manufacturing Equipment and process solutions. The manufacturing process of gypsum board can be divided into the following six steps: Raw material handling: All raw materials including gypsum powder, water and other additives enter the mixer through the automatic metering system and conveying system. After mixing, the gypsum slurry produced by the mixer is evenly spread on the surface of the continuously moving base paper. Stirring: With constant movement and vibration, the gypsum slurry gradually spreads and is evenly spread on the surface of the moving base paper. Then it enters the forming machine and is compounded with tissue paper. Molding: Through extrusion molding, the gypsum slurry is sealed by the top paper and bottom paper. This results in a pulp continuous drywall. The wet gypsum board is conveyed by the shaping belt, and gradually takes shape after the board is shaped, naturally condensed, and automatically cut. After the wet boards are arranged by the program-controlled system, they pass through the 1# horizontal conveyor and plate turner, and then quickly enter the dryer through the distribution bridge. Drying: Under strict control of the temperature zone of the dryer, use hot air at different temperatures to dry the wet board. Modified starch will stick to the paper. The dry drywall is then removed from the dryer. Cutting and edge sealing: Fold the gypsum boards over again (face inward), cut them into finished products of a certain size, and seal the edges to meet customer requirements. Stacking: Finally, it comes to automatic stacking machines for stacking. After stacking, it can be transported to the warehouse by forklift.

Production Process of Calcium Silicate Board In China, the production of calcium silicate boards mainly involves two methods: the wire-cutting method and the slurry method. Our company generally employs the slurry method for production. The slurry method is a more recent technological development that primarily focuses on changing the casting process. Calcium Silicate Board Manufacturing Plant Calcium silicate board is an asbestos-free insulation product that can withstand consistently high working temperatures. It is a lightweight, low thermal conductivity, strong, easy to install, reliable and durable product. Industrial grade pipe and equipment insulation is typically made from calcium silicate. It is a white, free-flowing powder obtained by reacting calcium oxide and silica. It has a low bulk density and high physical water absorption.

Model: CEP Series; Brand: Comair Working Power: 37-250 KW; Working Pressure: 8-18 Bar; Free Air Delivery: 6.2-40 m3/min Product Features COMAIR Electric portable air compressor   Features: 1. High reliability: The compressor has few parts and no wearing parts, so it operates reliably and has a long service life. The interval between overhauls can reach 40,000-80,000 hours. 2. Convenient operation and maintenance: the degree of automation is high, and the operator does not have to undergo long-term professional training, and can realize unattended operation. 3. Good power balance: no unbalanced inertial force, smooth high-speed operation, and baseless operation, especially suitable for mobile compressors, small size, light weight, and small footprint 4. Strong adaptability: It has the characteristics of forced gas transmission, the volume flow is almost not affected by the discharge pressure, and can maintain high efficiency in a wide speed range. 5. Electric mobile screw air compressor, power range 11-250KW, exhaust range covers 40m³ / min. Each basic model can be changed into a series of products with different exhaust volume and different exhaust pressure according to user needs.   Product details: 1. Air end The patented design of the large-diameter rotor, the anr end and the motor are directly connected through a high elastic coupling, there is no speed- increasing gear in the middle, the main engine speed is consistent with the motor, the efficiency is higher, the reliability is better, and the life is longer. 2. Motor machine The high-efficiency motor specially used for air compressor is selected, the motor has a large margin design, and the starting torque is large, which can meet the requirements of full life use under various working conditions. 3. The air volume control system is simple and reliable There is an automatic loading and unloading function, which can automatically adjust the gas volume according to the amount of gas consumption. 4. Microcomputer can only monitor The microcomputer can monitor the operating parameters such as exhaust pressure, exhaust temperature, current and voltage of the air compressor, and has automatic alarm and shutdown protection functions. 5. Multi-stage air filter Suitable for dusty working environment; super-large cooler, suitable for high temperature and plateau environment. 6. Spacious maintenance door The parts to be maintained are all within reach, maintenance of the air filter, oil filter, oil core and cooler is easy and easy, reducing downtime. 7. Easy to move It can still move flexibly under harsh terrain conditions. Each compressor is equipped with a lifting ring for safe and convenient lifting and transportation.

Basic Information Model: COI- Series; Brand: Comair Working Power:22-355 KW; Working Pressure: 8-13 Bar; Free Air Delivery: 2.8-61 m3/min Product Features Durable, efficient and stable air end  1. The design idea of "large rotor, large bearing, low speed" is adopted to reduce noise and vibration and increase the life and stability of the host. 2. The tooth surface is processed by the German KAPP rotor grinder to create a high-precision rotor, which is the first guarantee of high efficiency and stability of the air end. 3. Adopt a new type of 5: 6 asymmetric rotor tooth shape, high-precision three- coordinate measuring machine for comprehensive measurement, increase the air capacity by 5% -10% 4. All imported quality bearings are used. Specialized motor for air compressor  1. Imported brand bearings, protection class IP54, insulation class F, suitable for harsh environments such as large dust and high temperature. 2. IE3 high-efficiency motor uses less electricity and reduces your cost of use. 3. The motor is designed according to the 1.2 coefficient, and the starting torque is large, which can meet the requirements of full life use under various working conditions. High-quality and efficient coupling  1. The coupling is a torsionally elastic coupling with failure protection function, which can effectively damp and reduce the vibration and shock generated during the operation.  2. The elastic body is only under pressure and can withstand greater loads. The drum-shaped teeth of the elastic body can avoid stress concentration. Stable and reliable electronic control system  1. The control system has the functions of voltage detection, three-phase unbalance detection, overpressure, overtemperature, overload, and overrun alarm high alarm functions, real-time protection of the unit, automatic monitoring of operating conditions, automatic loading and unloading, sleep and restart And other functions, no need to be supervised by someone. 2. The standard Internet of Things system allows you to see the running status of your machine on your phone. 3. The intelligent control system can be set in both Chinese and English, and can realize the joint control of multiple units. 4. Choose high-quality electrical components, and the contactors are imported brands. 5. Emergency stop function, a push-type emergency stop switch is installed in a prominent position of the unit, and it can stop immediately in an emergency. Inner rotor fan  1. IP44 cooling fan, Class F insulation; 2. Compared with the outer rotor fan, the inner rotor fan has higher air pressure, more air volume, and better cooling effect; 3. Due to high wind pressure, the cooler and filter are less likely to be blocked Three filters  Air filter: the filter area exceeds 150% of the normal requirement, low the inlet pressure loss , and high energy efficiency ; Oil filter: The design of the imported oil filter with enlarged glass fiber material is adopted. The rated processing capacity of the oil filter is ≥1.3 times of the circulating oil volume. The filtering accuracy is high and the durability is good. Oil separator: imported glass fiber material oil core, good filtration effect, low oil core pressure loss. Inlet valve  Inlet valve: low flow speed test, low pressure loss, reduce energy consumption; Minimum pressure check valve: low pressure loss, precise control, ultra-fast repositioning to ensure that the user's air does not return. Temperature control valve: Mixed flow temperature control valve: The unit is equipped with a mixed flow temperature control valve to ensure that the unit is more convenient to start in a low temperature environment, and to ensure the unit is in the best performance state by controlling the oil supply temperature of the air end Oil-injected screw compressors use oil to lubricate, seal, and cool the compressor components during operation. Our Oil-Injected Compressor is engineered for high-performance applications that require reliable and powerful air compression. Ideal for industrial and commercial use, this compressor utilizes an oil lubrication system to enhance efficiency, extend the lifespan of the machine, and provide optimal cooling during operation. Choose our Oil-Injected Compressor for a powerful, efficient, and reliable solution to all your air compression needs, ensuring your operations run smoothly and effectively!