Measuring & Analyzing Instruments

Customized Computer Servo Double Column Universal Test Machine GENERL SPECIFICATIONS Estimated Packaging Dimensions: (W*D*H) 690*1080*1790mm Power supply source: single-phase, 220V, 50/60Hz (can be appointed) Estimated Gross Weight: 250kg HS Code: 9024800000 STANDARD FEATURES Item Description Frame capacity 2000kg Load cell brand Germany brand load cell for high accuracy 2000kg (500,1000kg are optional) Load accuracy 0.5% F.S Control system PC with windows 7 system Motor Panasonic servo motor w/AC variable speed drive system, high-precision mechanical ball screw rod Force reading kgf, Ibf, N, KN, T etc Vertical test space 1200mm including fixture Horizontal test space ≤400mm Test speed 0.1~500mm/min (adjustable) Software TM 2101 Curves display Load- elongation, Elongation-time, Time-elongation, Stress- strain Data display Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc… Safety features E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat universal tensile testing machine APPLICATIONS Tested sample: laminated materials, wood, leather, rubber & plastic, metal material, etc. Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force. Deformation under defined load: Test deformation under defined load of tested sample Load under defined deformation: Test load under defined deformation of tested sample Software can issue word/excel report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc. QUALITY ASSURANCE The guarantee period with FOC within 1 year (not including expendable parts cost and transport & travel fees) During the guarantee period, Haida shall supply free maintenance or replacement for the damaged part (just for non-expendable part) caused by non-human reasons; If any quality problems occur within the guarantee period, and Haida must provide on-site service, the transport and travel expense shall be borne by buyer; If any big quality problems occurs out of the guarantee period, Haida will provide a maintain service, the transport and travel expense shall be borne by buyer, also charge for a favorable price for new parts; Haida will provide a lifetime favorable price to the buyer for expendable & non-expendable parts used in system operation, equipment maintenance; The following conditions need to be paid reasonably even in the guarantee period: Natural disaster Operating mistakes Voltage is not fit for our manual Uninstall without our guides Damaged for borrowing to others Damaged for without authorized machine modification Damaged for without authorized calibration Without authorized transshipment mistake Attentions: the machine cannot be used following situations: Vibration, rocking place. Direct sunlight. Hot, dusty, damp places. To ensure safe, AC supply of the machine should be well grounded. Do not use strong solvents (such as: benzene, nitro oil) washing machine. Do not inject water and debris into the machine to prevent damage to electrical components and electrical shock. Machine’s disassembly and debugging can only be measured by the State Department approved the units and the company, other people not allowed to overhaul. MORE PRODUCTS: tensile testing machine environmental test chamber universal tensile test machine UV light aging test chamber carton compression test machine salt spray test chamber walk-in temperature test chamber carton clamp testing machine

Motorized Biological Microscope, BF, XYZ Motorized Infinity Plan Semi-APO 4x10x20x40x100x Objectives With 6 Holes Motor Nosepiece X/Y/Z Motorized Stage Large Moving Range 100x100mm Resolution 0.05um Full Auto 2D Scan Image Stitching With Quick & Precise Mode Upgradeable to 2D Pro & 3D Version Software Enable 3D Image Stitching & Measuring USB3.0 20M Cooling Fluorescent Digital Camera With Computer Pre Installed Software Item M12.5850 3D Full Auto SDF Biological Microscope M12.5850 M16.5850 Cata. No. M16.5850 3D Full Auto SDF Fluorescent Microscope Optical System Infinity Optical System, BF Bright Field ● ● 　 Semi-APO, Semi Apochromatic ● ● 　 APO, Apochromatic ○ ○ 　 DF, Dark Field ○ ○ 　 PL, Polarzing ○ ○ 　 PH, Phase Contrast ○ ○ 　 DIC, Different Interference Contrast ○ ○ 　 FL, Fluorescent ○ ○ 　 Head 30° Inclined Erect Image Infinity Gemel Trinocular Head, Interpupillary Distance 50~76mm, Light Spiltting Ratio Switch E100:P0/E0:P100, ○ ○ A53.0913-T30E 30° Inclined, Invert Image Infinity Gemel Trinocular Head, Interpupillary Distance 50~76mm; Light Splitting Ratio Switch R:T=100:0 or 20:80 or 0:100 ● ● A53.0913-T30 5-35° Tiltable, Inverted Image, Infinity Gemel Trinocular Head, Interpupillary Distance 50~76mm; Light Splitting Ratio 50:50 or 100:0 or 0:100 ○ ○ A53.0913-T535 Adapter 0.5x C-Mount, For 1/2"CCD, Focus Adjustable ● ● A55.0930-05 0.35x C-Mount, For 1/2"CCD, Focus Adjustable ○ ○ A55.0930-35 0.65x C-Mount, For 1/2"CCD, Focus Adjustable ○ ○ A55.0930-65 1.0x C-Mount, For 1"CCD, Focus Adjustable ○ ○ A55.0930-10 Digital Camera USB3.0 CMOS Cooling Digital Camera, For Fluorescent Imaging, GS Shutter, 20M, 1” CMOS, 30@1824x1216, Semi-Conductor Cooling Range -42°C, Anti-Frog, One Hour Exporsure, C-Mount ● ● A59.2225-20MPA Eyepiece High Eyepoint Plan PL10x/25mm, Diopter Adjustable ●● ●● A51.0904-1025T High Eyepoint Plan PL10x/26.5mm, Diopter Adjustable ○ ○ A51.0904-10265T High Eyepoint Plan PL10x/25mm, Diopter Adjustable, With Reticle ○ ○ A51.0905-1025T High Eyepoint Plan PL10x/26.5mm, Diopter Adjustable, With Reticle ○ ○ A51.0905-10265T Nosepiece BF 6 Holes, With Socket For DIC Slide & Polaring Analyzer Slide, Coded & Motorized Control by Software ● ● A54.0930-R6 Objective Infinity Plan Semi-APO Fluorescent Objective 　 　 　 Semi-APO Fluorescent 4x/0.13, W.D.=16.43mm ● ● A5F.0950-4 Semi-APO Fluorescent 10x/0.3, W.D.=8.13mm ● ● A5F.0950-10 Semi-APO Fluorescent 20x/0.5, W.D.=2.03mm ● ● A5F.0950-20 Semi-APO Fluorescent 40x/0.75, W.D.=0.74mm ● ● A5F.095040 Semi-APO Fluorescent 100x/1.3, W.D.=0.18mm ● ● A5F.0950-100 Infinty Plan APO Flourscent Objective 　 　 　 APO Fluorescent 2x/0.08, WD=6.2mm ○ ○ A5F.0951-2 APO Fluorescent 4x/0.13, WD=16.6mm ○ ○ A5F.0951-4 APO Fluorescent 10x/0.40, WD=2.1mm ○ ○ A5F.0951-10 APO Fluorescent 20x/0.75, WD=0.6mm ○ ○ A5F.0951-20 APO Fluorescent 40x/0.95, WD=0.15mm ○ ○ A5F.0951-40 APO Fluorescent 60x/0.90, WD=0.26mm ○ ○ A5F.0951-60 APO Fluorescent 100x/1.35, WD=0.13mm ○ ○ A5F.0951-100 Centering Objective For Fluorescent ○ ● A5F.0930-1 Focusing Low-Position Coaxial Coarse & Fine Adjustment, Coarse Adjustment Distance: 25mm; Fine Precision: 0.001Mm. With Coarse Adjustment Stop And Tightness Adjustment. ● ● 　 Main Body Transmitted Biological Main Body, ● 　 　 Digital Dimming System With Light Indicator, Brightness Set & Reset Function, With ECO Function Reflected &Transmitted Fluorescent Main Body, 　 ● 　 Digital Dimming System With Light Indicator, Brightness Set & Reset Function, With ECO Function Transmit 12V100W Halogen Lamp House, Pre-Centered ● ● A56.0915-LH Light 12V100W Halogen Bulb (Philps 7724) ● ● A56.0923-12100 　 Swing-out Type Achromatic Condenser, N.A.0.9/0.25 ● ● A56.0934-R 　 Built-In Transmit Filters LBD/ND6/ND25 ● ● 　 Reflect Epi Full Set, 6 Holes Reflect Epi-Fluroescent Illumation, With Iris Diaphragm, With Aperture Diaphragm, With Filter Slot, With Polarizing Analyizer Slot, With Protect Barrier, With Fluroescent Shutter 　 ● A5F.0906 Fluorescent Light --100W Mercury Light Box, Center Adjustable 　 --Digital Power Supply 90~240V 　 --HBO 100W Mercury Bulb OSRAM 　 --Attenuation Filter ND50 　 --Fluorescent Filter B,G,UV 　 --Fluorescent Filter V 　 　 A5F.0906-V Power Built-In 100-240V Wide Voltage Transformer ● ● 　 Other Allen Key M4 ● ● 　 Universal Condenser For Dark Field, Polarizing, Phase Contrast, DIC View Universal Condenser Universal Condenser, Disc With 8 Holes For Function DF, PL, PH, DIC ○ ○ A56.0960 --3 Small Holes For Phase Contrast Rings A5C.0960, PH Objectives A5C.0961 --3 Big Holes Only For DIC Rings A5M.0960 --2 Big Holes Center Adjustable, For Dark Field Ring A5D.0960 or DIC Ring A5M.0960 --Polarizier Lens Included In Socket Under Universal Condenser --Need to Select N.A.0.9 Condenser Lens As Standard N.A.0.9 Condenser Lens, Standard Selection, For Objective 10x20x40x60x100x ○ ○ A56.0960-09 Screw On Universal Condenser Disc N.A.0.2 Condenser Lens, Optional Selection, For Objective 4x ○ ○ A56.0960-02 Screw On Universal Condenser Disc N.A.1.4 Condenser Lens, Optional Selection, For Objective 20x40x60x100x ○ ○ A56.0960-14 Screw On Universal Condenser Disc Dark Field Dark Field Ring, Dry Type N.A.0.9, For Objective 10x,20x ○ ○ A5D.0960-D Dark Field Ring, Immersion Oil Type N.A.1.4, For Objective 40x,60x ○ ○ A5D.0960-I DIC Transmission DIC Slide, Insert To DIC Socket On Nosepiece ○ ○ A5M.0960 Transmission DIC Ring 10x ○ ○ A5M.0960-10 Transmission DIC Ring 20x ○ ○ A5M.0960-20 Transmission DIC Ring 40x/60x ○ ○ A5M.0960-4060 Phase Contrast Infinity Plan Apochromatic Positive Phase Contrast Objective ○ ○ 　 APO Objective APO PH 4x/0.16, WD=12.8m ○ ○ A5C.0950-4 　 APO PH 10x/0.40, WD=2.5mm ○ ○ A5C.0950-10 　 APO PH 20x/0.75, WD=0.6mm ○ ○ A5C.0950-20 　 APO PH 40x/0.95, WD=0.15m ○ ○ A5C.0950-40 　 APO PH 60x/0.90, WD=0.26mm ○ ○ A5C.0950-60 　 APO PH 100x/1.35, WD=0.13mm ○ ○ A5C.0950-100 Polarizing Polarizier Lens Included In Plug-in Socket Under Universal Condenser ○ ○ 　 Analyzer Slide, Insert To Analyzer Socket On Nosepiece ○ ○ A5P.0960 Upgrade Series Model Metallurgical Upgrade to M13.5850 3D Full Auto SDF DIC Metallurgical Microscope, APO 　 　 M13.5850 Remark: '●' Means Standard Outfit, '○' Means Optional

Product Description 100V Binary Channels Battery Pack Tester Quick Test Of The Cabinet Type 1. Equipment Characteristics √ The system uses 32 bit ARM processor , voltage and current use 16-bit AD converter √ Test item Programmable control √ The device supports charge and discharge port and tap batteries √ The continuous output power of the equipment is 2KW √ Equipment continuous load power is 6KW 2. Device Parameter Description Test class Test item Measuring range Resolution ratio open circuit voltage Open circuit voltage 1 10-100V ±2mV Open circuit voltage 2 10-100V ±2mV Communication internal resistance Communication internal resistance test 0-1000mΩ ±1mΩ Discharge test starting voltage 0-100V ±2mV End voltage 0-100V ±2mV discharge current 0.1-60A ±1mA discharge time 0-30S ±1mS Discharge perflow test Over-discharge current 4-120A ±1mA Overflow delay 0-60S ±1mS short - circuit protection Short circuit protection delay 0-9999uS ±1uS Charging test starting voltage 10-100V ±2mV End voltage 10-100V ±2mV charging current 0.1-20A ±1mA charging interval 0-60S ±1mS Charging protection test Charging over the flow 0-20A ±1mA Charging delay 0-20S ±0.1mS Resistance R1 / R2 NTC,ID 0-1000KΩ ±0.1KΩ 3. Product Mix Case size (W*D*H ) Weight 100KG Number of channels 1 Equipment accessories Test table pen line , online data line , user manual , upper computer software 4. How to order ? Please send us your purchase order by email or call us salesor we can make the proforma invoice under your request We need to know the following information for your order before sending your PI

Retroreflection Meter Handheld Retroreflectometer For Traffic Signs Asphalt Testing Equipment Executive standard: GB/T 18833-2012 Road Traffic Reflective Film GB/T 26377-2010 Retroreflectometer JJG 059-2004 Verification Regulation of Retroreflection Measuring Instrument Description: Sign retro-reflection measuring instrument is a new type of portable traffic safety detection equipment, which is used to measure the retro-reflection optical characteristics of various reflective safety signs, and is suitable for the on-site detection and inspection of traffic reflective products and vehicle safety reflective products. Asphalt Testing Equipment Main functional features: Imported aluminum shell 4.3 "high brightness LCD capacitive touch screen Large-capacity lithium battery, lasting for at least 2 days Magnetic suction calibration/detection method, more convenient Preset parameters, display date, time, power and other system information New optimized precision algorithm Automatic calibration, zero setting and calibration of measurement standards Input Chinese characters and English by soft keyboard and handwriting Store more than 99999 records, and can query the detection records in detail at any time Support data storage in Excel form Transfer the recorded data to the background terminal (PC) through USB interface and export it directly via USB flash disk Photoelectric measuring assembly with long life, low illumination and high sensitivity High-precision and high-stability analog data acquisition and A/D conversion circuit Support multiple measurements to calculate the average value Temperature and humidity real-time measurement display Bluetooth printer (optional) GPS positioning (optional) Specification: Measurement item retroreflection coefficient (unit: cd · lx-1 · m-2) Measuring value range 0-1999 Set the incidence angle – 4 ° Set observation angle 0.2 ° Measuring diameter ＞ 30mm Accuracy ± 5% Standby measurement time (intermittent measurement) ≈ 48h Built-in power capacity 3400mA. h Charging power supply DC5V Operating ambient temperature 0-40 ℃ Ambient humidity ＜ 80% Operating weight 1860g Overall volume: 220 * 246 * 82mm (L × H × W)

Electronic Common Rail Diesel Injector Pump Test bench / tester 22KW 415v Quick Details: Usage: Auto Testing Machine Power: Electronic Power: 11Kw,15Kw,18.5Kw,22Kw etc Rated Voltage: 220V/380V/415V Rated Voltage: 50/60HZ Cylinders: 6 / 12 Speed Range: 0—4000rpm Temperature Control Range: 42℃ ,Accuracy:±2℃ Backflow pressure control range: 0—3 bar Feed Volume Measurement Range: 0----45L/H Return Volume Measurement Range: 0---400L/H Max pressure: 2000 bar Color: green blue yellow or on request Weight:1080kgs Description: common rail pump and injector test bench: ADM800SEN common rail test bench is our latest independent researched special device to test the performance of high-pressure common rail pump and injector, it can test common rail pump and injector of BOSCH, SIEMENS, DELPHI and DENSO. It tests the common rail injector by imported high precise flow meter sensor, can test piezo injector. It controlled by industrial computer by real time. The data is also obtained by computer. 19 LCD screen display makes the data more clear. M800SEN can fulfill the remote assistance by internet and make the maintenance easy to operate. Advanced technology, steady performance, precise measurement and convenient operation. For testing and calibrating: 1. Mechanical in-line pumps and distributor pumps 2. Electronic control VE pumps and inline pumps high pressure common rail pumps: BOSCH CP1, CP2, CP3, DELPHI, SIMENS, DENSO HP0, HP2, HP3 PUMP 3. Common rail injectors 4. The testing database could be updated 5. Check and calibrate automatically and give out the testing report 6. With industrial computer, more stable and reliable Technical Specifiion: 1. Power 11Kw,15Kw,18.5Kw,22Kw etc 2. Rated Voltage 220V/380V/415V 3. Rated Voltage 50/60HZ 4. Cylinders 6 / 12 5. Speed Range 0—4000rpm 6. Temperature Control Range 42℃ ,Accuracy:±2℃ 7. Backflow pressure control range 0—3 bar 8. Feed Volume Measurement Range 0----45L/H 9. Return Volume Measurement Range 0---400L/H 10. Max pressure 2000 bar Competitive Advantage: High Quality Reasonable Price Good after Service More Than 10 Years Experience Factory Pictures: Electronic Common Rail System and Diesel Injection fuel Pump Test bench / tester 22KW 415v 0 Electronic Common Rail System and Diesel Injection fuel Pump Test bench / tester 22KW 415v 1 Electronic Common Rail System and Diesel Injection fuel Pump Test bench / tester 22KW 415v 2

Product Description Battery Impact Tester Battery Testing Equipment with SJ/T11170 , UL 1642 ,UL 2054 1.Product Name:Battery impact testing machine 2. Product Model:GX-5066 3. Description:The test sample is to be placed on a flat surface.A 15.8mm (5/8 inch) diameter bar is to be placed across the center of the sample. A 9.1 weight is to be dropped from aheight of 610mm onto the sample. 4.Test standard:UN38.3,SJ/T11169—1998,SJ/T11170— 1 , 998,UL1642:1995,UL2054:1997,QC/T 743-2006 QC/T 742-2006 , 5.Technical Parameter: Weight 9.1kg Impac , t height 610 mm Impact method Lift the weight to the height of 610mm and release the weight freely Bar 15.8mm(5/8 inch) diameter , bar Interior box SUS#304 Stainless steel Outward box Galvanized cool board with paint Sealing strip Silicone foam Air outlet Dia. 150mm, in the back box Door Single door with double storey and observing window Impact flat Stainless steel board Power 1∮,AC220V,ф5A , Weight About 105Kg Test environment Voltage 220V±10% 50HZ Temperature range 0 ~ 30℃, The most suitable temperature 25±5℃ Standard configuration Test mainframe,standard weights,safety bolts, Limited rod, Limited switch

1. Use high-speed, high integration microprocessor to sample and control. 2. Use USB to connect the notebook PC and device. 3. Communication wireless Bluetooth interface between the laptop and instruments. 4. Hardware cassette mechanism adopts DDS (from America), can correctly detect the breakdown :distortion, swell, shift, tilt, inter-turn short circuit deformation and contacting short circuit inter-phase. 5. High-speed, dual channel, 16 bit A/D sampling (the wave from curve will change obviously if change the tapping switch during the field tests.). 6. The software can adjust the output signal range, the maximum amplitude peak±10V. 7. The computer automatically generating the test results to be Word document. 8. Use precision, high stability components, the same phase repeat test, measurement repetition rate >99.5%. 9. Finished circuit boards, surface specially treatment with anti-water pollution and harmful gases. 10. The device with two measurement system: linear scan and sectional scan. 11. Amplitude-frequency characteristic comply the national technical specifications. 12. Test data automatic analysis system, horizontal compare the similarity of A, B ,C.

Minimum Order: 1 bags

1. Input single power, internal digital combination standard sine wave test source output. 2. Phase angle measurement function: measure the phase angle between high voltage side and low voltage side. Measure the turn ratio and angle of “Non integral point”. 3. It can conduct single-phase measurement and three-phase winding automatic test. Three phase turn ratio value, phase angle value, error, tapping position, tapping value can be measured for once. It also can identify connecting group number automatically. 4. Testing results can be displayed in the form of digit and hexagon vector diagram, which makes transformer connecting group can be made out obviously. 5.With blind test function: There is no need to choose connecting method and group. When measuring Y/△、△/Y transformer, no external short-circuit is needed, connecting method can be shifted automatically according to the chosen testing contents. 6. With tapping test function: TTR and TTR error in the position of each tapping switch can be gauged quickly. Just input rated TTR once, instead of inputting over and over again, TTR error in tapping position can be calculated. 7. With functions of turns ratio measurement and voltage TTR measurement. 8. With 5.6-inch LCD, the effect of data & figure display is visualized and fine. 9. With small size and light weight, it is easy to carry. 10. With built-in high capacity chargeable lithium battery. Test can be conducted without any power supply on site, and once the battery is charged fully, it can make measurement for more than 500 times continuously. TECHNICAL SPECIFICATIONS: 1. TTR Measurement Range: 0.8~10000. 2. High Measurement Speed: three-phase test can be completed within 40 seconds. 3. Measurement Accuracy: Voltage measurement accuracy on HV side: 0.05% Voltage measurement accuracy on LV side: 0.1% Phase angle measurement accuracy: 0.1° TTR measurement accuracy: 0.1% (0.8－3000) / 0.2% (3000－10000) 4. Volume: 260MM×160MM×60MM 5. Weight: 3KG

Minimum Order: 1 bags

1. High accuracy: The precision high -pressure thin film capacitance and precision high -pressure glass glaze resistance are used, the input impedance is high, the test current is reduced, the power consumption is small, and the measurement accuracy and stability of the instrument is improved. The signal processing section uses a high -performance OP for signal amplification. The latest dual -integral AD sampling technology is used. The four semi -semi - LCD display, the maximum resolution is 0.001kV, which is an update product of the high -voltage static voltage table; 2. Good anti -interference performance: special shielding technology. The surface of the aluminum alloy material is smooth and shiny, which effectively improves the distribution of electric fields around the average ball to prevent cutting -edge discharge and improving the anti -interference ability of measurement data. The low -voltage display instrument is shielded with all -metal closed structure. The high -voltage compressor and the low -voltage display table are connected by high -quality coaxial cables to reduce the effects of high -voltage on display values, thereby achieving high stability and high lineivity; 3. Safe and reliable: The FRC series DC digital high -pressure meter is composed of high -voltage compressors and low -voltage display instruments. The high -voltage pressure seminars are filled with DuPont. The amount is minimized and reliability is higher. There is no oil leakage problem. The high -voltage compressor and the low -pressure instrument at the time of work are connected by coaxial cables. The distance between the high and low voltage parts is far away, and the work is safe and reliable; 4. Simple operation: Use dial -up switching to high and low pressure and exchange, convenient and fast. The four semi -semi -liquid crystals directly display the measurement results, simple and intuitive. It brings great convenience to the detection work at the scene; 5. Easy to carry: The portable structure is used, and the whole machine is used as a shell with an aluminum alloy box, which can be easily disassembled. Small size, light weight, easy to carry, very convenient use;

Minimum Order: 1 bags

150L Temperature and Humidity testing Chamber With LCD Touch Screen Controller Product Overview Able to accurately simulate a wide range of complicated natural environments, and is suitable for reliability test in industrial products. Meet GB5170.2.3.5.6-95 standard requirements of environmental testing equipment and test methods for the basic parameters of electric and electronic products under the condition of humidity, low temperature, high temperature, and constant heat. Prouduct Application Applicable to environmental adaptability and reliability test in such industrial units as electronics, electrical appliance, battery, plastics, food, paper product, vehicle, metal, chemistry, building material, research institution, inspection and quarantine bureau, university etc.. Prouduct Specifications 1. Chamber 1.1 Workspace volume IW 600× IH 600 × ID 460 mm 1.2 Exterior size IW 880× IH 1730× ID 1400mm 2. Temperature 2.3 Temperature range -20 ～ 150 ℃ 2.4 Temp Deviation ±2.0℃ 2.5 Temp Constancy ±0.5℃ 2.6 Temp Uniformity ±0.5℃ 2.7 Ramping and soaking rate -20℃ ↓ +100℃ within 45 min(no-load) +20℃ ↑ -20℃ within 60 min(no-load) the temperature change rate is 5°C/Min Ⅴ,Chamber Structure Overall structure and chamber was composed of three parts as below. Insulation box, separate refrigeration units, and electrical control cabinet. 1．Insulation box wall material: high-quality carbon steel with static color spray inner wall material: SUS304 # matte stainless steel plate Insulation materials: rigid polyurethane foam insulation layer + glass fiber. 2．Door Heating wire was installed at the door frames to prevent condensation at low temperatures. 3．Observation window With 2 sets 350 × 500mm (width × height) observation window, multi-hollow electric insulation coated glass prevent condensation effectively 4．Cable port Φ50mm*2 located on both sides(each*1) with rubber stopper and plastic cover 5．Lighting device 11W/AC220V *1 located on observation window 6．Water outlet hole Available for drain the condensate water 7．Sample holder Two layers of stainless steel sample holder. 8．Mobile Casters Mobile Casters *4 with foot cups 9．Electric control box Total power circuit breaker, over-temperature protection. 10. Water supply system Water pump automatic supply Ⅵ,Air-conditioning system 1. Control mode Forced ventilation loops design, balance temperature & humidity control system (BTHC). 2. Air conditioning device Top-mounted diffuser to ensure uniformity of temperature and humidity Long axis centrifugal fan, evaporators, heaters, humidifiers was installed on air conditioning box 3. Heating Quality nickel-chromium alloy wire electric heaters, Non-contact control mode (SRR). 4. Cooling Sine wave pattern aluminum finned copper tube air heat exchanger (air-cooled) 5. Water supply Inner water supply mode 6. Humidifier Basin heated humidification Stainless steel sheathed heater Heater control: non-contact period, such as pulse width modulation, SSR (solid state relay) Water level control devices, anti-dry unit heater 7. Compressor Tecumseh brand Compressor 8. Throttling device Thermal href="http://cn.bing.com/dict/search?q=expans , ion&FORM=BDVSP6" expansion href="http://cn.bing.com/dict/search?q=va , lve&FORM=BDVSP6" valve & Capillary 9. Refrigerant R404a Environmental friendly high temperature level of refrigerant 10. Parts and its Brand Part Brand Remarks Compressor Tecumseh Hermetic piston compressors with low noise Oil Splitter ALCO,AC&R,ESK Evaporator( plate) DANFOSS Pressure relay DANFOSS, RANCO Condenser( plate) DANFOSS Drying screening program DANFOSS, SPORLAN Capillary KOMEG Expansion valve DANFOSS,SPORLAN Solenoid valve SAGINOMIYA, CASTEL Exhaust gas pressure regulating valve SAGINOMIYA Condensing pressure regulating valve SAGINOMIYA DANFOSS Note: Two options listed is for alternate choice and backup purpose

Micro Computerized Scooter Tire Friction Coeffcient Test Machine APPLICATION This tester is designed in accordance with EN14619. This machine is used to do the wheel adhesion test and get the result of the coefficient of adhesion. STANDARD FEATURES Item Description Load 100N Speed 1mm/s Ra roughness 1.5um~2.0um FEATURE 1. This consumer safety specification includes the following sections: establishing a performance requirement, test method and label requirements to reduce the risk to users of the scooter as described in the introduction. 2. The scope of use of this standard is to provide scooters for children aged 5 or above. 3. After this standard comes into effect, if the scooter can fully meet this requirement, the product can be described as fully meeting this standard through labels or other means. 4. The position used in this international standard is "inch-pound". The metric units provided in brackets in this international standard are for reference only. 5, the following preventive warnings apply only to part 7 test method: the purpose of this standard is not to find out all the security problems, any one is associated with its use. This standard in the user's responsibility is: before the use of the products, they must establish an appropriate safety and health habits, and decided to go to adapt to these constraints. WHY CHOOSE US? 1. Considerate Service Different countries plugs, manually change the-voltage from 110V to 220V, insurance indicator. 2. Excellent After sale Service: 18 months warranty. Besides, we can help you to repair your problem controller freely, even it's not from our factory. What you need to do is to send us the controller. 3. Commitment: We will sign a letter of commitment while we sign the contract, which will improve your confidence to us. 4. Good Packaging: Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc. Electronic Lab Test Machines , Micro Computerized Scooter Rubber Tire Friction Coeffcient Test Machine 0

SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in safety and automation system. We have over 24 years of experience in the design and manufacture of intrinsic barrier, signal isolators, surge protection device, safety relay, automation direct safety relay, intrinsically safe barrier relay, power transmitter and temperature transmitter. Our products and solutions cover many areas--from process automation safety to factory automation. Safety relay is mainly applied to the safety control circuit, connecting the safety sensing elements and mechanical equipment motion controller. When there is a fault in the safety circuit, the safety relay automatically detects the fault and stops the machine movement, to protect equipment and personnel safety. Chenzhu safety relay is the first product to get PLe/Cat.4, SIL3 certified in China mainland. Automation and safety is the main character of the product that you can be assured. Safety Relay Types CZSR Classic Series Safety Relay CZSR Classic Series Safety Relay is a classic general-purpose safety relay with high cost performance, suitable for various industrial automation applications. Including E-stop buttons, safety gates, light beam devices, two hand control safety relay, safety mats and safety relay module. E-Stop Button, Safety Gate Safety Relay Light Curtain Safety Relay Two-hand Push Buttons Safety Relay Safety Mat Safety Relay Extension Module Safetu Relay CZSR Process Series Safety Relay Since the beginning of the industrial age, examples of critical processes have been common. Safety instrumented systems are most commonly used in process (such as refineries, chemical, nuclear power) facilities to provide protection. DO Signal (SIS) 24V DC 3A Safety Relay DO Signal (SIS) Input 24V DC 5A Safety Relay CZSR Smart Series Safety Relay CZSR Smart range is a smart safety controller product that can be flexibly configured with logic, and is suitable for small stand-alone automation equipment.

Minimum Order: 200000

SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in safety automation system. We have over 24 years of experience in the design and manufacture of intrinsic barrier, signal conditioner, surge protection device, safety relay,signal arrester, power transmitter and temperature transmitter. Our products and solutions cover many areas--from process automation safety to factory automation. Electronic devices are always threatened by power surges and transients caused by power failures or nearby lightning strikes. Signal SPD was born to protect electronic devices in automatic control systems. It is signal surge protector for field equipments such as sensors, transmitters, flow meters, solenoid valves, thermocouples, thermal resistance, devices with RS485 or RS232 interface and for I/O interfaces such as Al, AO, Dl, DO, Tl, Pl in PLC, DCS, FGS, ESD control systems. It was widely used in petrochemical, gas, environmental protection and new energy industries. Chenzhu also provides signal surge protection device in intrinsical safety circuits that meet the same design and structural standards as intrinsic safety equipment, which requires certification and approval of them.

Minimum Order: 200000

SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in automation safety. We have over 24 years of experience in the design and manufacture of intrinsic barrier, signal conditioner, surge protection device, safety relay, power transmitter and temperature transmitter. Our products and solutions cover many areas--from process automation safety to factory automation. CHENZHU SPD (surge protection device) has a fast and powerful surge current leakage capacity. In the lightning surge interference, the surge protection equipment ensures the safety of the industrial automation control system a variety of field equipment and control equipment. The SPD protection device created by Chenzhu, one of the most professional spd factory, has integrated lightning-proof technology, intrinsic safety explosion- proof technology, and functional automation safety technology. As a result, the SPD electrical device is the first 20kA anti-surge capacity of the leading products in China. The SPD surge protector is also an important part of the safety automation system like the intrinsic isolated barrier, signal conditioner, safety relay, etc. Now the spd for sale is very cheap, so if you want buy spd, please contact us quickly.

Minimum Order: 200000