Plastic Machinery & Parts

Anmei company specializes in the production of TPU slip masterbatch ingredients and TPU frosted matte masterbatch excellent dispersibility in cast films. Casting film can be compounded with plastic woven cloth during production to be used as shade cloth and tourist tents. TPU anti-block masterbatch is designed to prevent blocking during the extrusion of thin TPU film and improves the bound ability of TPU film. Problem & Solution of Masterbatch Application in Cast Film Problem1: Moisture in the masterbatch or poor heat resistance of the ingredients will cause the cast film to have a network structure. Solution1: Appropriately reduce the temperature of each zone and dry the masterbatch in the cast film production process. Color masterbatch should be chosen pigments with high color strength and good heat resistance, and then strengthen the blowing, and appropriately increase the water temperature. Problem2: The low content of titanium dioxide in the film will lead to the poor hiding power of the cast film. Solution2: Increasing the amount of masterbatch Increasing the content of titanium dioxide in the masterbatch Problem3: Poor pigment dispersion leads to colored spots on the cast film. Solution3: Choosing masterbatch with good dispersibility ingredients. Problem4: The volatile matter in the masterbatch causes smoke during processing. Solution4:  Reducing the extrusion temperature Choosing high-temperature resistant masterbatch As a masterbatch company, Anmei provides pa6 plastic material, modified polyolefin, master batches, poly butylene terephthalate, pbt, pbt material, pbt masterbatch, black masterbatch and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

PC-ABS is a blend of PC and ABS.If the two materials are simply mixed and then injected directly, the effect is very poor, and delamination will occur. The advantages of PC are rigidity and toughness, but the disadvantages are stress cracking and high viscosity. The advantage of ABS is good fluidity, but low surface hardness. The blended PC-ABS material retains the advantages. PC-ABS has higher surface hardness, higher rigidity and toughness, and also higher resistance to stress cracking. The mechanical properties of PC and ABS material are somewhere in between. Typical Application of PC/ABS PC/ABS of Anmei Company has passed the SGS laboratory test, and its oil resistance can meet the requirements of 10k times of opening and closing of kitchen appliances without cracking. Processing Detail of ABS chemical resistance Other Details of PC/ABS Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature ​ 80*C As a engineering plastic company, Anmei provides pa6 plastic material, modified polyolefin, master batches, pc abs gf30, pc abs v0, pc abs gf20, pc abs gf10, pc abs fr40, abs pc plastic, pc abs, pc abs material and etc. For pc abs price or more information, please feel free to contact us!

Minimum Order: 1 bags

PA 6 GF50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural parts of machinery, vehicles, electronics, sports equipment and other fields. We know that pa6 50gf composite material takes both strength and toughness into consideration, which is exactly what the suspension control arm needs. Processing Detail of PA6 GF50 (A1011J) Other Details of pa6 6 gf50(A1011J) Physical Property Ash                     (15.0% 1 ISO3451/1) Conditioned 600°C*2h Density (1250Kg/m3 1 ISO1183) Conditioned 23°C Shrinkage Parallel Flow (0.5-0.7 % 1 ISO294-4) Shrinkage Vertical Flow (0.7-1.1% I ISO294-4) Mechanical Properties Tensile strength (125.0MPa 1 ISO527) Conditioned 5mm/ min Tensile Strain at Break (2.5% I ISO527) Conditioned 1.0J Notched Impact Strength (125 0MPa I ISO527) Conditioned 2mm/min Flexural Strength (190MPa 1ISO178) Conditioned 2mm/min Flexural Modulus (5700 MPa I ISO178) Conditioned 5mm/ min Thermal Property Melting Point (220°C I ISO11357) Hot Deformation Temperature (175*C I ISO75) Conditioned 1.8MPa Flammability Class (HB 1UL94) Conditioned mm Injection Molding Conditions Drying Temperature 130°C Drying Time 3h Cylinder Temperature 240-260°C Nozzle Temperature 240-260*C Tooling Temperature 80*C As one of masterbatch producers, Anmei provides pa6 plastic material, modified polyolefin, master batches and etc. For more information, please feel free to contact us!

Minimum Order: 1 bags

Cascell® WH foam core has been specifically designed for aerospace application, such as fairing and middle section of launch vehicle. It can also be used in back pressure frame of large civil plane due to its excellent mechanical properties. In the helicopters, Cascell® WH has been mainly used in main & tail rotor blades and fuselage panelsetc. Processing and production Cascell® WH can take curing temperature up to 130°C and pressure up to 0.3MPa. After heat treatment, Cascell® WH can even be cured at temperature of 180°C and at pressure of 0.7MPa. Cascell® WH core makes it possible to produce sandwich components in a single step (co-curing), resulting in reduced overall production time. Cascell® WH is highly suitable with autoclave technologies and vacuum infusion processes, including RTM and VARTM processes. Thermoforming and shaping Cascell® WH can be easily thermoformed or CNC machined to meet customers’ requirements, bringing tremendous manufacturing advantages. High precision, pre-shaped and ready-to-use foam cores in complex or simple geometries can also be supplied by the Cascell® Machining Department. ​

Minimum Order: 1000

16-1600mm High speed HDPE pipe Extrusion line Introduction HDPE Pipe Extrusion Machine is widely used in the whole country water supply, water sewage, gas supply and house water supply project. It includes HDPE Plastic pipe extrusion machine, LDPE Plastic pipe extrusion machines, PPR/PERT Pipe extrusion lines, ect. YILI machinery adopts European most advance technology and develops with its own technical Strategy to ensure unique structure, high configuration, highly automation, easy operation of the whole pipe extrusion machine. The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very convenient. The line can be equipped with another extruder used for extruding the mark line.

PET Jar Blowing Machine, Automatic Bottle Blowing Machine, Blow Moulders Benefits of One Step Injection Stretch Blow Molding Machine (ISBM machine) Nearly no scrap rate Guaranteed hygienic requirement Fixed orientation: ISBM machine could make bottles with the same orientation of screw, which could make the closures (screw cap, flip caps, pump, etc.) pointing in the same direction. Shaping ability: the preform remains warm during the process, which could present a better shaping ability, a sharper angle. Most beneficial bottling line Less energy consumption while high output rates Scrapless process meaning no flash to trim and no regrind. High utilization of raw material, high yield, high rate of return on investment. Does not require separate preform mold and machine. Cut transferring cost of reforms/bottles. Wokring Process of Injection Stretch Blow Molding Machine Workplace 1 THE FIRST SERVICE POSITION The plastic melt is injected into the parison under low injection pressure, and the neck of the bottle is precisely shaped. After proper control, the mold is opened and the mandrel and parison are transferred to Workplace 2 THE SECOND SERVICE POSITION Blow molding is completed in this cavity by cooling and forming station. (The mold cavity determines the shape and appearance of the bottle). The parison is inflated by the air coming out of the mandrel and close to the mold. Then, the mold is opened and the mandrel and the parison are transferred together Workplace 3 THE THIRD SERVICE POSITION Demoulding is completed at this station, and then packaging or filling is carried out through the assembly line. The three actions of injection, blow molding and demoulding are carried out at the same time, which is highly efficient and energy-saving. Data Sheet of JASU Injection Stretch Blow Molding Machine (ISBM) Item Unit Machine Type ISB 1100AN-3 Injection Part Screw Diameter mm 50 Screw L/D Ratio L/D 24:1 Screw Speed r/min 0-150 Theoretical Injection Capacity cm3 481 Injection Pressure MPa 176 Max. Hydraulic Pressure Kg/cm 140 The Actual Injection Quantity g(ps) 452 Oz 16 Screw Stroke mm 245 Clamping Part Blow Clamping Force KN 150 Clamp Tonnage KN 600 Wheel Diameter mm 1100 Max. Height PP, PET, PETG, Tritan, PS, PC mm 200 PC, PETG, Tritan, PS mm 220 Open Vertical Mode Trip mm 570 Others Max. Pump Pressure MPa 16 Servo Motor Kw 22 Mode Opening/Locking Motor (Double Pump) Kw 22 Electric Power Kw 12.2 Tank Volume L 420 Dimension of Machine m 4.5*1.95*3.4 Machine Weight T 9 --Parameters are subject to change without prior notice. --Providing PC, PET, PP, PS, PETG, TRITAN screw barrels according to customers' requirements. 10ml 100ML 4 Cavity Injection Stretch Blow Molding Machine BV 0 Application of injection stretch blow molding machine A large range of refined and essential designed platic blow molded bottles and jars are available from size 10ml to 2500ml. Shapes: cylinder, jar, oblong, square, plain round, wide-mouth, oval, non- round, ultra-light etc. Wide mouthed jars for a variety of food and non-food applications, Cosmetics Packaging: mascara, lotion, cream etc. Pharmaceuticals: eye drops, medicine bottle, pills, oral liquid, intravenous drip bottles etc. Baby Feeding Bottles, Spice, Liquor, Carbonated Drink, Beverage Bottles etc. 10ml 100ML 4 Cavity Injection Stretch Blow Molding Machine BV 1 JASU is the first PET Bottle Machine Manufacturers of Single Stage PET Blowing Machine Absorbed the advanced technology from Japan and Germany. Manufacturer/Direct Factory with production base takes 24000m2. Own highly qualified technical staffs (20-30 persons) and R/D center. Obtained a number of technical patents. Overseas sales increase 33% annually. Market network throughout the country , and export to many countries of East Europe, South America, South Africa etc. Our machine enjoyed high reputation among customers. Service technicians (holding visa and passport) are on call and able to serve on site and instruct via voice and videos. Mould and tooling, we have our own mold-making facility and mould workshop ourselves, advanced CNC machine and smart design engineers. We can treat different materials and sizes of products. Auxiliary machine,we will equip you with the necessary quality auxiliary machines to ensure the production plan running well. Provide one-stop service. 10ml 100ML 4 Cavity Injection Stretch Blow Molding Machine BV 2

Automatic deburring is a process for removing flash from molded rubber parts. We use liquid nitrogen, high - speed rotation and shot blasted plastic media in varying combinations to remove the flash in a highly precise, economical and expedient manner. Parts that have thin flash can be quickly and thoroughly cryogenically deflashed. This process is exceptionally good at removing the inner dimensional and complex flash that cannot be removed by any other method.

Minimum Order: 1 bags

Product Description PLA Biodegradable sheet make machine long life and high output (1) Introduction to GWELL machine Gwell plastic transparent sheet unit production line absorbs and digest western country advanced extrusion technology. And its main parts choose from all over the world (such as screw, barrel, roller, etc.). The energy consumption of its complete sets of equipment , intelligent, automation, safety standard, technology standard, etc., have been at or near the world standard of the product. This series of products has a number of inventions and utility model patents so that it replaces imported equipment, and has a cost-effective advantage.Its quality has reached the world's product performance, and we have a matching team of experts and process engineers to help users debug, produce high-quality products. (2) Twin-screw combination technology Years of experience in R&D and design of twin-screw configuration are optimized and combined with advanced software technology. Special double- threaded elements and unique screw combinations can realize conveying plasticization, mixing and kneading, shearing and dispersing, homogenizing, exhausting, pressure building and extrusion and various functions. Especially for the removal of crystal water inside the PLA material, it has a very high efficiency. The specially designed exhaust port does not emit material, and is free and unobstructed. It realizes low-temperature extrusion and avoids thermal degradation of PLA; (3) Vacuum exhaust technology Multi-stage forced exhaust is efficient and safe to ensure that the PLA material will not be hydrolyzed or crystallized during the melting and plasticizing process. Special three-stage vacuum exhaust technology and oil- gas separation technology, super large pumping capacity and super high vacuum, greatly reduce the viscosity reduction of PLA. (4) Spiral flow channel technology inside the high-strength roller The internal spiral flow channel structure design of the high-strength roller is equipped with a water temperature control system, so that the roller has precise temperature control and efficient heat transfer effects; (5) Machine configuration Type GWS90 single screw extruder GWS120 single screw extruder GWS85 twin screw extruder Product width 500mm - 800mm 800mm - 1200mm 800mm - 1200mm Product thickness 0.15mm - 2mm 0.15mm - 2mm 0.15mm - 2mm Output 150KG/H - 200KG/H 300KG/H - 400KG/H 450KG/H - 550KG/H Pla Sheet Extrusion Line 0 Pla Sheet Extrusion Line 1 Pla Sheet Extrusion Line 2

No.: YM-3019 Name: Rolling swivel with open eye snap Material: Brass + stainless steel Color: Black nickel, white nickel, pickled Specification Pull KG 1.8*60mm 50 2.0*80mm 100 With the characteristics of rolling swivel, the snap is designed to be reinforced. The snap is made of imported super-strength stainless steel with excellent elasticity; Resistant to various corrosive forces more than 1 time stronger than common snaps; Wide range of applications, with double insurance to prevent the accessories from falling off, no hurting to the line.

Minimum Order: 1000

The WT series of the double shaft shredder is a high-capacity machine. Each of our twin shaft shredder adopts "dual motor + double planetary reducer" to achieve an ideal shredding efficiency. It is extensive used in improving utilization rate of waste resource , such as municipal solid waste, domestic waste, industrial waste, waste tyre, resource regeneration, waste incineration pretreatment, etc. 1. The discharge port is designed without screen, which greatly improves the shredding efficiency. Each rotor is driven by independent motor and gear reducer with large torque, stable performance. 2. The hydraulic feeding device can be customized, micro PLC for auto control of start and stop, co-rotation and reversal rotation of rotors while overload. 3. Customized blade according to different application. The material includes 60Si2Mn, H13, D2, and the structure has split type and integral type for option. Single claw or multiple claw blades are optional according to different materials and requirements for high efficiency.

Minimum Order: 1 bags

Professional Well-Known Manufacturer FFP3 Cup Type Automatic Mask Machine Product features 1. The original cold-pressed melt-blown molding technology has the advantage that low temperature does not change the chemical composition and physical structure of the material, so our machine can make ffp3 mask out of ffp3 material 2.Our mask machine is small in size, occupies 55% of the products of the same trade, does not need disassembly when being transported by air and sea, and saves 50% in freight cost 3. The efficiency of peer products is less than 10 pieces per minute, and the production efficiency of precision brand machines can reach 20-30 pieces per minute, which is increased by 200%, and one can reach three machines 4. Modular simple design, stable and error-free, fool-like operation, direct docking after landing can be produced, without installation and debugging 5. We have two-year long warranty period, worry-free after-sales 6.Eight major functional technologies, such as arbitrary customization function, grinding tool shape, cutting shape, material application, mobile jet printing, welding of long and short ear bands, sticking nose bridge strips, sticking sponge strips and installing breathing valves, are stably realized, and our customers can choose at will

FMC Bean Pump Mud Pump Parts Small Alumina Ceramic Liners FMC 435 FMC 1324 Cylinder Sleeve API-7K Detail Information Usage: Drill Rig Application: Conveying Mud And Flushing Fluids Structure: Piston Pump Standard Or Nonstandard: Standard Type: Mud Pump Product Name: Mud Pump Oem: Applicable Condition: New High Light: replaceable rubber pistons, riplex mud pump Product Description FMC Bean Pump Mud Pump Parts Small Alumina Ceramic Liners FMC 435 Cylinder Sleeve API-7K Brief Introduction FMC 435 FMC 1324 Small Ceramic liners Cylinder Sleeve Product Description FMC 435/420 Zirconia ceramic pump cylinder & ceramic liner Size: φ50-70

Qingdao Kailite plastic machinery Co., LTD. is one of professional plastic pipe production line manufacturers. We provide SJ Series High Efficiency Single Screw Extruders, SJSZ Conical Twin Screw Extruder, pp sheet extrusion, pp sheet extrusion line, pp sheet making machine, extrusion line and so on. Want to know more? Please contact us. XPS foamed board, has a perfect close. Its density, water absorption coefficient of heat conducting and the coefficient of steam pervasion are all lower than those of other board heat preservation materials. They have the characteristics of strong intensity, light material, airtight, anti- corrosion, ageing resistance, low cost, etc. Performance & Advantages of XPS Foamed Board Extrusion Line This XPS production line has been widely used in the fields of heat preservation and heat insulation in the construction industry, frost resistance of the highway, railway, airport, square and household fitment. It is the generally acknowledged and the best heat preservation material in the market at present.

Minimum Order: 5 dozens

Qingdao Kailite plastic machinery Co., LTD. is one of professional plastic pipe production line manufacturers. We provide SJ Series High Efficiency Single Screw Extruders, SJSZ Conical Twin Screw Extruder, pp hollow sheet extrusion line, extrusion line for sale and so on. Want to know more? Please contact us. In recent years, wood-plastic products have become popular materials for ordinary household decoration and municipal construction projects. On the basis of the original wood-plastic equipment, our company has improved and developed the wood- plastic production line equipment. The wood-plastic production line can produce wood-plastic plates and profiles of different specifications by replacing different models of moulds. Widely used in municipal engineerings, such as wooden plastic fence, wooden plastic Pavilion and other landscape buildings; family decoration, integrated kitchen board, integrated bathroom board, ceiling, door and window frame kick line, fast-loading wallboard; industrial can be used to produce wooden plastic pallets, wooden plastic containers, etc. Our company's wood-plastic production line equipment can cooperate with surface roughening equipment and surface embossing processing equipment to produce wood- plastic products with different texture patterns to meet the needs of different uses. Performance & Advantages of WPC Extrusion Machine Raw materials are made of bamboo and wood fibers mixed with plastic materials. Bamboo and wood fibers are taken from nature, such as waste straw, straw, etc. They can be recycled to save costs and create greater profits. Products can be sawed, nailed, planed, painted and glued at will like wood. It is superior to wood in performance, insect-proof and durable. We also provide WPC door frame making machine, WPC board making machine, WPC door manufacturing machine, WPC manufacturing machine, WPC door frame machine,etc. And now the WPC machine price and WPC door frame machine price is pretty relatively cheap.

Minimum Order: 5 dozens