Telecom Equipment & Accessories

As a fiber optic products supplier in the industry, TUOLIMA focuses on brand customization, multi-selective product logo printing, high-end and independent packaging design, to provide customers with a one-stop service that is quite trusted by professionals worldwide. The body of this closure splitter box is made of fiberglass and PP as customer's request that has extremly high tensile strength, waterproof and dustproof protection function, reaching IP68. This joint closure optic splitter box can be equipped with 1*16 Mini splitter& 1*16 card type splitter and 16 SC adapters. It can be mounted wall, aerial or holding-pole with one or two pieces of metal board tightly attached onto the cable or pole. Details of TGJS-303A Splitter Type Fiber Optic Splice Closure Inside Splitter place look: Could install a 1x16 mini splitter or a 1x16 card type splitter Inside splice tray look: 24 core/tray, 4pcs trays Stainless steel accessory Complete installation accessory for wall mounting(holding-pole accessory should contact sales) Specification of TGJS-303A Splitter Type Fiber Optic Splice Closure Dimension（mm） 380×245×130 Max. capacity(Single fiber) 16 Weight（kg） 4.5~5 Sealing type Mechanical Cable ports 1 input cable port for un-cut cable from diameter from10~17.5mm. 2 output cable ports for cable diameter from 8~17.5mm. 16 output cable ports for cable diameter less than 4mm. Single splice tray capacity(Single fiber) 16 Splice tray quantity 2pcs Packing And Comments Of TGJS-303A Splitter Type Fiber Optic Splice Closure This equipment packaging produced by TUOLIMA is moisture-proof and earthquake- proof. The accessories are packed first plastic bags, then into the boxes with plastic bags for sealing. There are moisture-proof and earthquake direction signs outside the boxes. It can't be inverted in the transport and be free from rolling when carrying. Please load carefully and prevent the collision. You should prevent it from heavy rain before installation. The temperature in the transport should be controlled between-35℃ to +55℃. The excessive accumulation of goods should be stored on the cartons. The treasury should away from the erosion of corrosive gas equipment and the temperature should be below 45℃ and higher than -5℃, and relative temperature should not be high in long-term(generally less than 75%). Package dimensions(W*H*D) 520mm*420mm*330mm Package material Standard carton for sea shipping or air express Weight 4.5kgs

As a fiber optic products supplier in the industry, TUOLIMA focuses on brand customization, multi-selective product logo printing, high-end and independent packaging design, to provide customers with a one-stop service that is quite trusted by professionals worldwide. Here are the steps to use the high precision fiber optical cleaver tool: 1. The light fiber plate cover open, open plate single core optical fiber fixture, confirm the knife in front of side position. 2. The optical fiber is placed in the V slot of the single-core optical fiber fixture, and the optical fiber coating is applied to remove the scale alignment of the boundary line and the fixture according to the required cutting length. (for example, when cutting the length of 16mm, the boundary line is aligned with the 16mm of the scale), it is time to confirm that the bare fiber section is straight. 3. On the cover of the single core fiber optic clamps to clamp the optical fiber. Close the cover of the optical fiber clamp, and push the knife to cut off the optical fiber. 4.Open the cover of the optical fiber and hold the fiber while holding down the cover of the single core fiber clamp and take out the optical fiber. The Trouble shooting of TLM-01B Fiber Optic Cleaver Cut off the bad of the FTTH tool may be caused by the following reasons: when the fiber is placed on the cutting knife, the fiber is not straight. Please go straight to the optical fiber. the position of the blade is too high, please adjust the height of the blade. optical fiber control block with dust and other foreign materials, please clean the fiber control block. foreign matter such as dust cleaning blade. fiber dust and other foreign matter, please remove the fiber coating, carefully wipe the bare optical fiber part. Please contact the company's after- sales service department in a timely manner. Specification of TLM-01B Fiber Optic Cleaver We have many kinds of fiber optic cable cleaver of different specifications, for example, ofc cleaver, s09 fiber cleaver, single fiber cleaver, automatic fiber cleaver, splicing cleaver and so on. This fiber tool kit is of good quality. And the fiber optic cutter price and fiber cleaver blade price are very affordable for our customers. If you have any problem about the fiber cutter tool after receiving our products, please call us. 1 Bare fiber diameter 125um 2 Fiber core number Single core 3 Fiber coated diameter 0.25&0.9mm 4 Coating length Cutting length +18mm 5 Fiber Cleaver length 9-16mm(0.25mm) 10-16mm(0.9mm) 6 Cutting angle ≤0.5° 7 Blade life 48000 8 Size 56(W)*55(D)*48(H)mm 9 Weight 265g

As a fiber optic products supplier in the industry, TUOLIMA focuses on brand customization, multi-selective product logo printing, high-end and independent packaging design, to provide customers with a one-stop service that is quite trusted by professionals worldwide. TGJS-101 is one of the main equipment for user access points, applied for protective connection and distribution between two or more cables. The primary function of horizontal fiber optic splice enclosure is to connect distribution cable and indoor cable in the open air. This inline fiber optic splice closure is widely used in communication systems, cable TV, optical cable network systems and others by virtue of steady structure, good sealing performance and easy construction. As a professional fiber optic cable manufacturing company, TUOLIMA can customize the horizontal fiber optic splice closure according to your requirements. Details of TGJS-101 Inline Type Fiber Optic Splice Closure The body is made of high quality engineering plastic with good strength; 3.2 With good waterproof design, the fiber optical splice closure can be applied into underground and aerial. 3.3 Be equipped with 4 splice trays (each capacity is 12 cores) ; The maximum can be 96 core (8 PCS 12F black trays). 3.4 Excellent fiber routing design ensures the radius curvature of the fiber well and enough fiber storage space. Specification of TGJS-101 Inline Type Fiber Optic Splice Closure Model No. TGJS-101 Color Black Capacity 48/96 cores Protection Level IP68 Material PP+GF Inlet/outlet 2/2 Dimension(MM) 480*155*110 Weight（KG） 2.3

As a fiber optic products supplier in the world, TUOLIMA has been operating in the optical communication industry since 2009, mainly fabricating and selling various fiber optic cable and cable fittings, fiber optic splice closures, distribution boxes with all accessories, FTTH transmission equipment. Rack mount patch panel is a panel used for cable interconnections between communication facilities. This odf fiber optic patch panel integrates fiber splicing, fiber termination, fiber optic adapters & connectors together in a single unit. Fiber optic termination panel also works as a protective device to protect fiber optic connections from damage. However, fiber optic cable patch panel comes into different shapes and specifications. To choose the right fiber optic termination box rack mount is not an easy thing. There are various fiber patch panel connector types in our company, such as 24 port fibre patch panel. TUOLIMA provides various models of fibre optic patch panel for your different needs. Why Choose TUOLIMA Rack Mount Patch Panels 1.Competitive price: We are a manufacturer of all kinds of rack mount patch panels, ODF, cabinet which made of stainless steel, SMC or metal. 2.Quality guarantee: TUOLIMA selects high quality metal to inject, bend and paint it into different molds or all customized design which ensures best quality. 3.Efficient and responsible after-sales service: TUOLIMA owns an individual group of sales in charge of your complete purchase experience. Any quality problem, please find our contact, then your products will be carefully inspected and found it a satisfied solution.

As a fiber optic products supplier in the world, TUOLIMA has been operating in the optical communication industry since 2009, mainly fabricating and selling various fiber optic cable and cable fittings, fiber optic splice closures, distribution boxes with all accessories, FTTH transmission equipment. PM-01D handheld optical power meter is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers. Features of handheld optical power meter ingenious appearance, wide range of power measurement, high accuracy and user self-calibration function with high performance-to-price ratio. Fiber optic cable power meter have different types for you to choose, such as opm fiber optic meter, ofc power meter, mini optical power meter, optical power meter normal, fiber optic power meter and light source cable, mpo power meter and so on. The optical meter price is also reasonable. Our light source power meter fiber optic cable tools and test equipment deserve your trust, we believe that our optical power detector will up to your standard. Now, we have various fiber tools and equipment for sale. Details of PM-01D Power Meter Maintenance in Telecom Maintenance CATV Fiber Optic Lab Testing Other Fiber Optic Measurements Advantages of PM-01D Power Meter User self calibration function Comfortable LCD display and optional backlight LCD display supports night operation Power measurements in dBm or mw and insertion loss in dB Low battery consumption, more than 240 hours continual operation time for three 1.5V alkaline batteries 10 minutes Auto-off function can be activated or deactivated Specification of PM-01D Power Meter Type PM-01DA PM-01DC Wavelength(nm) 800~1700nm Detector InGaAs Measurement  Range (dBm) -70~+6 -50~+26 Uncertainty ±5% Calibrated Wavelength(nm) 850,980,1300,1310,1490,1550 Resolution(dB) 0.01 Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universal Power Supply Alkaline Battery(3 AA 1.5V batteries) Battery Operating Time 240 h with 1.5V Battery(3) Operating Temperature(℃) -10 ~ +60 Storage Temperature(℃) -25 ~ +70 Relative Humidity 0 to 95% (non-condensing) Dimension(mm) 175x82x33 Weight(g) 310 Packing and Comments of PM-01D Power Meter MODEL INCLUDES All PM-01D Models PM-01D Optical Power Meter, Protective Rubber Boot, 3pcs 1.5V batteries, User Manual, Cotton swabs and Soft carrying case.

As a fiber optic products supplier in the world, TUOLIMA has been operating in the optical communication industry since 2009, mainly fabricating and selling various fiber optic cable and cable fittings, fiber optic splice closures, distribution boxes with all accessories, FTTH transmission equipment. Fiber optic cable clamp is used to link a overhead fiber drop cable to a optical devices or a house suitable for both indoor and outdoor installation. Tuolima has many types of tension cable clamps made of stainless perforated shim materials, nylon or Aluminum, which increases the tension load without cable slip and damage guaranteeing long time of usage. The stainless steel/aluminum tail wire/ bail supports installations on walls, poles with drive hooks, pole brackets, FTTH brackets and other drop wire fitting or hardware. Features of Outdoor Fiber Optic Tension Cable Clamp Since the production of fittings, Tuolima has developed dozens of types of fiber optic cable clamps for domestic and foreign customers. There are many types and wide coverage. There is always one suitable for you. Tuolima selects high-quality stainless steel, aluminum, zinc, nylon and other raw materials to meet the multiple needs of different customers for quality and price Strict factory testing to ensure good product stability Professional molding machines and injection molding machines provide customized services for customers Why Choose TUOLIMA Outdoor Fiber Optic Tension Cable Clamp? 1. Competitive price: We are a manufacturer of fiber optic clamps with self-owned land and mold machines and cheaper raw material resource with stable domestic and foreign orders. 2. Quality guarantee: All fiber optic products of Tuolima go through strict tensile strength tests before they leave the factory, and the load-bearing capacity during simulation is even greater than the tensile strength after actual installation. 3. Efficient after-sales service: TUOLIMA has a professional group of engineers and sales in charge of your complete purchase experience. If any quality problem after receiving the tension wire clamp, we will response at once and give you a satisfied solution such as device configuration or remote control. Perfect and responsible service makes Tuolima your most trusted partner.

Fiber Optic Patch Cord/ FC/APC-FC/APC/ Single mode G657A1/ Simplex/3.0mm/ LSZH/ PVC/Yellow Introduction Fiber optic patch cords suited for equipment jumper cable, cross connects and work area connections. All patch 100% factory tested to ensure performance to TIA/EIA-568-B-3 standards. All of them have excellent environmental and mechanical performances. Our patch cord provides high reliability and flexibility for our customers in different industries. Our top-of-the-line fiber optic cable assemblies and stringent manufacturing process ensures the excellent optical performance. All patchcords can be customized in length, fiber mode and connector types to suit every single customer requirement with our state-of- art production facilities. G657A1 Simplex 3.0mm LSZH Fiber Optic Patch Cable Single Mode Yellow Color 0G657A1 Simplex 3.0mm LSZH Fiber Optic Patch Cable Single Mode Yellow Color 1G657A1 Simplex 3.0mm LSZH Fiber Optic Patch Cable Single Mode Yellow Color 2 Features 1) Avalible in simplex, duplex connector options 2) Fast delivery 3) TIA compliant color-coded connectors and boots 4) Cable jaket and boots color-coded for easy ID of fiber 5) Fiber options: OS2, OM1,OM3, and OM4 6) Fully tested for insertion loss and return loss 7) Other jacket colors available as custom with MOQ and lead time applicable Specification Connector Type FC/APC to FC/APC Fiber Count Simplex Fiber Mode G657A1 9/125um Working Wavelength 1260~1625nm Insertion Loss ≤0.3dB Return Loss ≥60dB Attenuation at 1310/1550nm (Typical) 0.36/0.22 dB/km Ferrule Materials Ceramic Cable Diameter 3.0mm Strength Member Aramid yarn Minimum Bend Radius (Long term) 10D Minimum Bend Radius (Short term) 20D Cable Jacket PVC / LSZH Cable Color Yellow Operating Temperature -20~70°C Storage Temperature -40~85°C Our certificates 1) ISO9002 2) REACH 3) ULE329066 4) SGS, ROHS

Product Description Cisco GLC-EX-SMD Compatible 1000Base EX SFP Transceiver Module (1310nm SMF 40km LC DDM) Product Details Cisco Compatible GLC-EX-SMD Vendor Name FIBER MALL Form Factor SFP Max Data Rate 1.25Gbps Wavelength 1310nm Max Distance 40km Connector Duplex LC Transmitter Type 1310nm DFB Cable Type SMF Receiver Type PIN TX Power -5.0~0dBm Receiver Sensitivity < -23.0dBm Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Operation Temperature 0 to 70°C (32 to 158°F) Quality Assurance Excellent quality is the foundation of FIBER MALL' s survival and development. Our operation team are experts with many years' experience in optical communication industry. Our manufacturers are first-class manufacturers in the industry. Many of them have the qualification of OEM for first-class system equipment manufacturers. Quality Certification We control the quality of our products, including our strict qualification of manufacturers, quality control process and production technology, and compliance with certification and safety standards. At present, our products meet the industry standards and mainstream quality certification, such as ISO 9001, CE, RoHS, FCC, etc.

PRODUCT DESCRIPTION GYFTY Outdoor Optical Cable Single-Mode 4-Core 8-Core 12-Core 24-Core Non- Metallic Outdoor Direct Buried ▌Product description The center of the cable core is a glass fiber reinforced plastic. The steel (aluminum) tape has reliable edge bonding, high strength, no torsion, and stable control of the excess length of the optical fiber. After the cable is formed, the additional attenuation of the optical fiber is close to zero, and the dispersion value No change, excellent environmental performance, applicable temperature range is -10℃~+70℃ ▌Characteristics sing high modulus phosphating steel wire, the appearance is bluish-gray, good toughness, strong tensile strength, not easy to bend, not easy to strain, and not easy to rust. The use of high-quality chrome-plated steel strip, the outer skin is smooth, heat resistance, corrosion resistance, environmental resistance, no corrosion, low optical fiber hydrogen loss Suitable for overhead and pipeline installation with rodent and lightning protection requirements Two parallel steel wires ensure tensile strength Small diameter, light weight and friendly installation ▌Features Fiber paste and cable paste fill the entire loose tube, and the cable fills every gap in the core under pressure Prevent the intrusion of moisture and the friction between the optical fibers in the process of making the optical fiber cable and damage the optical fiber High quality index requirements, less core attenuation, to ensure good mechanical properties of the fiber and prolong its service life Flattening force: 800/3000N Use environment: -10℃~+70℃ ▌Fiber Color Code No. 1 2 3 4 5 6 Color Blue Orange Green Brown Gray White No. 7 8 9 10 11 12 Color Red Black Yellow Violet Pink Aqua ▌Cable structure and parameter Fiber count 2~12 14~24 Max. Cores in tube 12 24 Cable diameter 7.6 8.3 Tensile strength(N) 1500 Crush resistance (N/100mm) Long term 300 Short term 1000 Bending radius Dynamic 20×D Static 10×D Storing temperature -40°C to +70°C Operating temperature -40°C to +70°C G.652 G.655 50/125μm 62.5/125μm Attenuation (+20℃) @850nm ≤3.0dB/km ≤3.0dB/km @1300nm ≤1.0dB/km ≤1.0dB/km @1310nm ≤0.36dB/km ≤0.40dB/km @1550nm ≤0.22dB/km ≤0.23dB/km Bandwidth (Class A) @850nm ≥500MHz·km ≥200MHz·km @1300nm ≥1000MHz·km ≥600MHz·km Numerical Aperture 0.200±0.015NA 0.275±0.015NA Cable Cut-off Wavelengthλcc ≤1260nm ≤1480nm ▌Structure and Technical Specifications GYXY Fiber Count Nominal Diameter< , br>(mm) Nominal Weight (kg/km) Allowable Tensile Load (N) Allowable Crush Resistance (N/100mm) Short Term Long Term Short Term Long Term 2~12 6.2 52 1000 400 1000 1000 14~24 7.0 64 1200 500 1000 1000 ▌Structure and Technical Specifications GYFXY(All-Dielectric) Fiber Count Nominal Diameter< , br>(mm) Nominal Weight (kg/km) Allowable Tensile Load (N) Allowable Crush Resistance (N/100mm) Short Term Long Term Short Term Long Term 2~12 6.2 45 600 250 1000 1000 14~24 7.0 56 800 300 1000 1000 ▌Roduction and Quality Test GYFTY Outdoor Fiber Optics Cables Single Mode 4 8 12 24 Core Direct Buried Fiber Optic Cable 0 ▌Application GYFTY Outdoor Fiber Optics Cables Single Mode 4 8 12 24 Core Direct Buried Fiber Optic Cable 1 ▌Packaging GYFTY Outdoor Fiber Optics Cables Single Mode 4 8 12 24 Core Direct Buried Fiber Optic Cable 2 1. Standard Packaging: Rolled by wooden wooden drums. 2000m to 6000m/drum or other required. 2. Sheath mark: The following printing(white hot foil indentation)is applied at 1meter intervals. a. Supplier: Guanglian or as customer required b. Standard Code(Product Type, Fiber Type,Fiber Count) c. Year of manufacture: 7 years d. Length marking in meters. Our Service: 1. We are the one of biggest manufacture of fiber optic cable in China and has more than 10 years manufacturing and selling experience. 2. We accept OEM. The cable size and material are customized. Ur own logo and own design are welcome. We will produce according to your requirment and description; 3. Please send us inquiry for more products info and we will give you feedback in 12 hours.

Pre-Connectorized OptiTap to SC/APC Drop Cable Hardened Corning OptiTap Flat Cable 4mm*8mm OptiTap/H connector assemblies provide a robust and sealed connection solution for fiber to the home (FTTH) connectivity. The hardened connector end incorporates an SC/APC type connection within a slim, sealed, threaded polymer housing allowing easy connection to either a multiport terminal or in-line extension receptacle. The SC/APC connector mates to a standard adapter, providing a common interface for FTTH applications. Available with flat drop or traditional round style OSP cables, the hardened connector provides an ideal solution for direct burial, conduit, or aerial installations. Features: 1. Compatible with Corning-OptiTap and H-Connector; 2. Factory terminated for high performance; 3. Available with one or both ends connectorized; 4. Hybrid (one end with an OptiTap Connector, one end with standard SC connector) available with or without pulling grip; 5. Available in dielectric or toneable; 6. Designed for aerial, direct-buried or duct installation; 7. IP-68 water and dust protection ; 8. -40℃~85℃ operating temperature; Pre-Connectorized OptiTap To SC/APC Drop Cable Hardened Corning OptiTap Flat Cable 4mm*8mm 0 Pre-Connectorized OptiTap To SC/APC Drop Cable Hardened Corning OptiTap Flat Cable 4mm*8mm 1

Product Description GYFTY53 Non Metallic Fiber Optic Cable Strong Moisture Resistance 1.Stranded Loose Tube Non-metallic Strength Member Light-armored Cable GYFTY53 Product Description: The fibers, 125μm, are positioned in a loose tube made of a high modulus plastic.The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non- metallic strength member.The tubes (and fillers) are stranded around the strength member into a compact and circular core.After the cable core is filled with the filling compound to protect it from water ingress, the cable is completed with a thin polyethylene(PE) inner sheath. A layer of water- blocking tape is applied around the cable core to prevent water ingress all the same.After a corrugated steel tape armor is applied,the cable is completed with a PE outer sheath. 2. Features: ♦ Excellent mechanical and temperature performance ♦ Special tube filling compound ensure a critical protection of fiber and resist the water. ♦ Non-metallic central strength member FRP withstand axial loads. ♦ Inner sheath effectively lower the external mechanical loading. ♦ Corrugated steel tape longitudinal cover cable core and provide good crush resistance. ♦ PE sheath protects cable from ultraviolet radiation. ♦ 100% core filling water prevent cable jelly to ensure the cable watertight. 3. Application: ♦ Frequent lightning area and anti electric field : The subway, tunnel ♦Long-distance communication: Local trunk network & User network ♦ Duct and direct buried application ♦ Harsh environment 4.Optical Characteristics: Item G.652 G.655 50/125um 62.5/125um Attenuation @850nm ≤3.0dB/km ≤3.2dB/km @1300nm ≤1.0dB/km ≤1.2dB/km @1310nm ≤0.36dB/km ≤0.40dB/km @1550nm ≤0.22dB/km ≤0.23dB/km Bandwidth (Class A) @850nm ≥500MHZ.km ≥200MHZ.km @1300nm ≥1000MHZ.km ≥600MHZ.km Numerical aperture 0.200±0.015NA 0.275±0.015NA Cable cut-off wavelength ≤1260mm ≤1450mm Technical Parameters Cable Type Fiber Count Tubes Fillers Cable Diamete rmm Cable Weight kg/km Tensile strength Long/Short term (N) Crush resistance Long/Short term (N/100mm) Bending radius Static/Dynamic (mm) GYFTY53-2~6 2~6 1 5 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-8~12 8~12 2 4 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-20~24 20~24 4 2 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-32~36 32~36 6 0 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-38~48 38~48 4 2 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-50~60 50~60 5 1 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-62~72 62~72 6 0 12.0 155 1000/3000 1000/3000 12.5D/25D GYFTY53-86~96 86~96 8 0 13.8 170 1000/3000 1000/3000 12.5D/25D GYFTY53-134~144 134~144 12 0 16.8 205 1000/3000 1000/3000 12.5D/25D Environmental characteristics Operating temperature -40~+70℃ Storage temperature -40~+70℃ GYFTY53 Non Metallic Fiber Optic Cable Strong Moisture Resistance 0GYFTY53 Non Metallic Fiber Optic Cable Strong Moisture Resistance 1

Product Description Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable Sc To Sc Fiber Optic Cable Jumper Fiber Optic Cable Patch Cord Ftth Optical Fibers 1. Description Fiber optic patch cord is a fiber optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch, or other telecommunication equipment. Having a thick layer of protection, it is used to connect the optical transmitter, receiver, and the terminal box. This is known as "interconnect- style cabling". 2. Specification Product Name Fiber optic patch cable Connectors LC, SC, ST, FC, MU, DIN, D4, MPO, SC/APC, FC/APC, LC/APC, MU/APC Fiber Singlemode/Multimode 50/125, 62.5/125 (Multimode) OM2&OM1 50/125, 10G (Multimode) OM3 Cable Simplex, Duplex Φ3.0mm, Φ2.0mm, Φ0.9mm PVC or LSZH Polishing Manner UPC,SPC,APC (8°& 6°) Insertion Loss ≤ 0.1dB (For Singlemode Master) ≤ 0.25dB (For Singlemode Standard) ≤ 0.25dB (For Multimode) Tested by JDS RM 3750 Return Loss (Singlemode) UPC ≥ 50dB SPC ≥ 55dB APC ≥ 60dB (typ.65dB) Tested by JDS RM3750 Repeatability ±0.1dB Operating temperature -400C to 850C Geometry Requirement ( Singlemode) Ferrule Endface Radius 7mm ≤ R ≤ 12mm (For APC) 10mm ≤ R ≤ 25mm (For Standard) Apex Offset ≤ 30 μm (For Master) Apex Offset ≤ 50 μm (For Standard) Undercut -50nm ≤ U ≤ 50nm Tested by DORC ZX-1 3. Product list Boot Connector Fiber Type Cable number Ferrule Connector 0.9mm 2.0mm 3.0mm LC FC SC ST MU D4 MTRJ MPO DIN 9/125um SM 50/125um MM 62.5/125um MM OM3 OM4 Simplex Dup , lex Multi-fiber Ribbon PC , APC UPC 1M 2M 3M4M , 5M ......... Customized < , br> 4. Features 1). Low Insertion loss 2). High return loss 3). Good Repeatability 4). Good Interchange 5). Excellent Environmental Adaptability 5. Application 1). Communication rooms 2). FTTH (Fiber to The Home) 3). LAN (Local Area Network) 4). FOS (fiber optic sensor) 5). Fiber Optic Communication System 6). Optical fiber connected and transmitted equipment 7). Defense combat readiness 6. Product pictures: Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 0 Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 1 Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 2 Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 3 Sc To Sc Single Mode Patch Cord Ftth Fiber Optic Jumper Cable 4

High dense connection, easy for operation SC APC Fiber Optic Patch Cord for FTTX + LAN A patch cord is a fiber optic cable used to attach one device to another for signal routing. SC stands for Subscriber Connector- a general purpose push/pull style connector. It is a square, snap-in connector latches with a simple push-pull motion and is keyed. Features: Low insertion loss, high return loss High dense connection, easy for operation High credibility and stability Good in repeatability and exchangeability Application: 1.FTTH , CATV, LAN, MAN, WAN, Test &Measuremen 2.Video transmission , Data transmission 3.Active Device Termination 4.Premise Installations 5.Telecommunication and Data processing Networks 6.Industrial, medical & military 7.Systems Integration for Long Haul, Metro and Access Network Mechanical Drawings: High dense connection, easy for operation SC APC Fiber Optic Patch Cord for FTTX + LAN 0 Specification: Parameter Un , it FC, SC, LC ST, MU MT-RJ, MPO E2000 SM MM SM , MM SM MM SM PC , UPC APC PC PC UPC< , br> PC PC UPC PC PC , APC Insertion loss(typical) dB ≤0.3 ≤0. , 2 ≤0.3 ≤0.2 ≤0.3 ≤0.2 ≤0.2 ≤0.3 ≤0.2< , br> ≤0.2 ≤0.3 ≤0.3 R , eturn loss dB ≥45 ≥50

LC Sc 3.0mm Duplex Fiber Cable Sm Simplex 9/125 Fiber Optic Patch Cord The fiber optic patchcord is a length of fiber optic cable terminated at both ends with connectors that allow it to be rapidly and conveniently connected to telecommunication equipment. Whether they are called a patch cord, patch cable or fiber optic jumper. Description: Connector:SC,FC,ST,LC,MU,M , TRJ,E2000, etc Polishing type:PC,UPC,APC Fiber Type:Singlemode(G652D,G657A),Multimode(OM1,OM2,OM3 , ,OM4) Fiber cable:Simplex,Duplex,Multi-core,Ribbon,Distributio , n, Armoured, etc Cable OD:0.9mm,2.0mm,3.0mm,etc Cable Material:PVC-OFNR,PVC-OFNP,LSZH, etc Patchcord Length:1m,2m,etc Optical Specifications: Parameter Singlemode Patchcord Multimode Patchcord Polishing Type PC UPC APC PC Insertion loss(dB) <=0.3dB,MTRJ<=0.5dB <=0.3dB <=0.3dB <=0.3dB,MTRJ<=0.5dB Return loss(dB) >=45dB,MTRJ>=35dB >=55dB >=65dB Operating temperature -20ºC~75ºC Storage Temperature -40ºC~75ºC 100 mating cycles loss I.L changed≤0.1dB Durability >1000 cycles LC Sc 3.0mm Duplex Fiber Cable Sm Simplex 9/125 Fiber Optic Patch Cord 0 LC Sc 3.0mm Duplex Fiber Cable Sm Simplex 9/125 Fiber Optic Patch Cord 1