Import-Export Bulletin Board Post an Offer to Sell

New here? Please subscribe
to post trade leads. It's FREE!

Telecom Equipment & Accessories


Home > Offers to Sell > Telecommunications & Networks > Telecom Equipment & Accessories

Browse leads by category:
Phone Cards  Telephone Cords  Telephone Cables
    
 
 

Summary of 3/28/24 23:49 GMT:>> Show Compact View
12/4/23 2:07 GMT
100G QSFP28 SR4 Transceiver Receiver 850nm Distance 100M TQR-HGM1-85DCR

100G QSFP28 SR4 Transceiver Receiver only 0~70°C 850nm distance 100M,TQR- HGM1-85DCR Product Description: The 100G QSFP28 Transceiver is a high-performance, reliable, and cost- effective transceiver module designed for 100Gbps data rate applications. It is compliant with the QSFP28 MSA and IEEE802.3ba standards and supports 100Gbps data rate with SR4 optical interface. It provides 100m transmission distance over OM3 and OM4 multimode fiber. The low power consumption of less than 2.0W and operating temperature range from 0 to 70°C makes it an ideal choice for data center and high-performance computing applications. The product name is 100G QSFP28 SR4 Receiver Module. Features: Product Name: 100G QSFP28 Transceiver Low power consumption: < 2.0W Distance: 100m Connector: MTP/MPO Optical Connector Operating case temperature: 0~70°C Channel: 4 Independent Full-duplex Channels Technical Parameters: Parameter Value Product Name 100G QSFP28 SR4 Receiver Module Channel 4 Independent Full-duplex Channels Performance Only Receiver Low power consumption < 2.0W Operating case temperature 0~70°C Fiber Type MMF Power Single +3.3V Power Supply Wavelength 850nm Distance 100m DDM YES Performance Specifications – Optical Parameter Symbol Min Typ. Max Unit Receiver Center Wavelength Λr 830 850 860 nm Average Power at Receiver Input, each Lane -10.3 - 2.4 dBm Receiver Reflectance - - -12 dB Los Assert LosA -30 - - dBm Los Dessert LosD - - -7.5 dBm Los Hysteresis LosH 0.5 - - dB Applications: The 100G QSFP28 Transceiver from Trixon with model number TQR-HGM1-85DCR is a high-performance transceiver and widely used in data networks. It is manufactured in CHINA and has a maximum data rate of 100G. This transceiver is equipped with a digital diagnostic monitoring (DDM) feature, which allows users to monitor the performance of the transceiver. It supports multi-mode fiber (MMF) cable with a maximum distance of 100m. This 100G QSFP28 Transceiver consists of 4 independent full-duplex channels, which allows data to be transmitted in both directions simultaneously. It is suitable for applications such as high-speed network infrastructure, data center interconnect, and enterprise networking. Customization: Trixon 100G QSFP28 Transceiver(Receiver only) Brand Name: Trixon Model Number: TQR-HGM1-85DCR Place of Origin: CHINA Fiber Type: MMF Low power consumption: < 2.0W DDM: YES Wavelength: 850nm Data Rate: 100G Support and Services: We offer full technical support and service for 100G QSFP28 Transceiver. Our team has the expertise and experience to ensure your product is working optimally and efficiently. We provide a full range of services, including installation, troubleshooting, maintenance, and upgrades. Our knowledgeable technicians are available 24/7 to provide you with the highest level of customer service. We are committed to providing the highest quality and most reliable products for your business needs. Packing and Shipping: Packaging and Shipping for 100G QSFP28 Transceiver(Receiver only). All items must be securely packaged in a durable cardboard box. Box must be large enough to fit the product and provide a layer of cushioning. Fragile items must be clearly marked with a "Fragile" sticker. Items must be shipped via a reliable carrier. Tracking numbers must be provided for each shipment. Items must be labeled with the correct address and contact information. Special care must be taken when shipping items to international destinations. Items must be inspected upon arrival and any damage or discrepancies must be reported immediately. Reference Datasheet File code:DS180012 100G QSFP28 SR4 Transceiver Receiver 850nm Distance 100M TQR-HGM1-85DCR 0100G QSFP28 SR4 Transceiver Receiver 850nm Distance 100M TQR-HGM1-85DCR 1100G QSFP28 SR4 Transceiver Receiver 850nm Distance 100M TQR-HGM1-85DCR 2100G QSFP28 SR4 Transceiver Receiver 850nm Distance 100M TQR-HGM1-85DCR 3100G QSFP28 SR4 Transceiver Receiver 850nm Distance 100M TQR-HGM1-85DCR 4100G QSFP28 SR4 Transceiver Receiver 850nm Distance 100M TQR-HGM1-85DCR 5

Contact:
Phone:
Fax:
Email:
Ms. Angela
86-28-63025144
86-28-84556672
Send Inquiry
Sichuan Trixon Communication Technology Corp.,Ltd
Building 2#,No.1000 Tiangong Avenue,Xinxing Street,Tianfu New Area,Chengdu Sichuan Province, 610213, China
Chengdu 610213
China
12/3/23 9:19 GMT
30mm Micro Fiber Heat Shrink Sleeves 250μm Bare Fiber Splice Protectors

Fiber Optic Heat Shrinkable Sleeves is used to protect the optical fusion fiber. The construction of the three protective and strengthening elements of the Fiber Optic Sleeve is distinctive in the function that each provides. The inner stainless steel pin keeps the sleeve rigid and stable. The pin is vibratory tumbled with a special medium. This eliminates the possibility of fiber scarring or material penetration, both of which could damage the sensitive glass fibers. The inner tube is made of a specially designed material that compresses. The fiber splice becomes encapsulated within the inner tube. The outer tube is made of a heat-shrinking polyolefin. This encloses the inner tube and the encapsulated fiber splice, providing double protection and ensuring that moisture and air are eliminated from the fiber splice. 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is designed for 250μm bare fiber splicing protection. Length is 30mm only, it is special used in smaller application, such as CWDM, DWDM ect. 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is commonly known as an optical fiber heat shrink protect sleeve. 0.5mm Steel Rod 30mm Length Micro Fiber Optic Heat Shrinkable Sleeves is widely used in communication optical fiber splicing projects, it is consisted of a special cross-linked polyolefin, a hot melt tube and a strengthen member. Chengdu Focus Infra Materials Company offers a number of high quality splicing sleeve options.Micro series lengths include 15mm, 20mm 25mm, 30mm 35mm and 40mm. Sleeves come standard with a clear tube for viewing the color of the fiber itself. It is specially designed to improve the mechanical strength of the optical fiber welding point and ensure the reliability of the splicing; does not affect the optical transmission characteristics of the optical fiber; The use method is simple and safe, reducing the risk of adverse effects on optical fiber during use; The transparent sleeve can monitor the optical fiber splicing at any time; The inside is completely sealed, so that the welding point has good high temperature and high humidity resistance.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
yuki
+8618981876882

Send Inquiry
Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou
Chengdu 611230
China
12/3/23 9:15 GMT
45mm Length FTTH Fiber Optic Splice Protect Sleeves Heat Shrink Tube

Fiber Optic Splice Sleeve was developed to protect and strengthen fusion splices on fiber optic cables. The Fiber Optic Splice Sleeve intends to protect (mechanically) fiber optic splices. The Fiber Optic Splice Sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation. The Fiber Optic Splice Sleeve is fitted to the sleeve holders that are generally exist in fiber optic trays.

Minimum Order: 5000

Contact:
Phone:
Fax:
Email:
yuki
+8618981876882

Send Inquiry
Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou
Chengdu 611230
China
12/3/23 9:12 GMT
Drop Cable Protect Fiber Heat Shrink Sleeves is a special Tube

Fiber Optic Splice Sleeve was developed to protect and strengthen fusion splices on fiber optic cables. The Fiber Optic Splice Sleeve intends to protect (mechanically) fiber optic splices. The Fiber Optic Splice Sleeve is built from shrinkable plastic tube with metal cylinder inside. The fibers are inserted before splicing into the plastic tube. After making the splice, the shrinkable tube is heated and shrunk on the splice. It can protect the spliced fiber from being break down and unwanted bending and is coated with the plastic tube. It gives to the installer flexibility while using the spliced fibers during installation. The Fiber Optic Splice Sleeve is fitted to the sleeve holders that are generally exist in fiber optic trays. Product advantages: 1. Specially designed by the cross-linked polyolefin, hot melt tube and enhanced stainless steel wire optical fiber splice protection devices, does not affect the fiber optic light guide features. 2. Bare fiber hot melt, stainless steel needle, protect fiber 3. Industrial sealing treatment at both ends of the tube to keep the steel needle from falling out 4. Selected 304 high-quality stainless steel, not easy to rust, corrosion- resistant, and anti-aging 5. The double-layer shell is made of environmentally friendly PE and has a long service life 6. Better protection of bare fiber and prolong the service life of fiber

Minimum Order: 5000

Contact:
Phone:
Fax:
Email:
yuki
+8618981876882

Send Inquiry
Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou
Chengdu 611230
China
12/3/23 9:03 GMT
1.0mm Steel Rod Drop Cable Protection Fiber Heat Shrink Sleeves

Drop Cable Protect Fiber Heat Shrink Sleeves is a special polyolefin thermal-shrinkable sleeve, also called EVA. The outer layer is made of high quality soft crosslinked polyolefin material and inner hot-melt adhesive. The outer layer has the characteristics of insulation, corrosion prevention and wear resistance, while the inner layer has the advantages of low melting point, waterproof seal and high adhesion. Drop Cable Protect Fiber Heat Shrink Sleeves can Moisture resistant for environmental protection Clear sleeve make it easy to detect splice before shrinkage Easily use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation. The Drop Cable Protect Fiber Heat Shrink Sleeves is widely used in FTTH Drop cable joint connection protective. With big Inner Diameter of inner tube, we can put drop cable easily. communication optical fiber equipment such as optical fiber splice box, optical fiber terminal box, optical fiber distribution box, optical fiber transfer box, etc., when using Drop Cable Protect Fiber Heat Shrink Sleeves, it can not only protect the splice point but also increase the optical fiber machinery the strength reduces the damage of the optical fiber during the installation process without affecting the light guide characteristics of the optical fiber. If it is a transparent Drop Cable Protect Fiber Heat Shrink Sleeves, the splicing situation of the optical fiber can be seen clearly at a glance when the optical fiber is connected.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
yuki
+8618981876882

Send Inquiry
Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou
Chengdu 611230
China
12/3/23 8:48 GMT
FTTH Fiber Optic Splice Sleeves for Fibre Optic Patch Cord Joint Protector

Description: Drop Cable Protect Fiber Heat Shrink Sleeves is a special polyolefin thermal-shrinkable sleeve, also called EVA. The outer layer is made of high quality soft crosslinked polyolefin material and inner hot-melt adhesive. The outer layer has the characteristics of insulation, corrosion prevention and wear resistance, while the inner layer has the advantages of low melting point, waterproof seal and high adhesion. Drop Cable Protect Fiber Heat Shrink Sleeves can Moisture resistant for environmental protection Clear sleeve make it easy to detect splice before shrinkage Easily use and avoid any damages to the optical fiber during installation Color optical fiber splice protector is very convenience for installation. The Drop Cable Protect Fiber Heat Shrink Sleeves is widely used in FTTH Drop cable joint connection protective. With big Inner Diameter of inner tube, we can put drop cable easily. communication optical fiber equipment such as optical fiber splice box, optical fiber terminal box, optical fiber distribution box, optical fiber transfer box, etc., when using Drop Cable Protect Fiber Heat Shrink Sleeves, it can not only protect the splice point but also increase the optical fiber machinery the strength reduces the damage of the optical fiber during the installation process without affecting the light guide characteristics of the optical fiber. If it is a transparent Drop Cable Protect Fiber Heat Shrink Sleeves, the splicing situation of the optical fiber can be seen clearly at a glance when the optical fiber is connected.

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
yuki
+8618981876882

Send Inquiry
Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou
Chengdu 611230
China
12/3/23 8:16 GMT
Ribbon Fiber Optical Cable Fusion Splicing Protection Multi core

Description: Ribbon Fiber Fiber Optic Protection Sleeve is designed for Ribbon fiber, normally it's 4 cores, 6 cores, 8 cores and 12 cores fiber optic protection sleeve for flat fiber cable. Ribbon Fiber Fiber Optic Protection Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. The sleeves can be divided into two types (single sleeve and ribbon sleeve) according to the function. The single type is used for the single-fiber, and the mass type is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the ceramic reinforcement member to realize the function. Ribbon sleeve means there are several cores for the fiber. So the mass sleeve includes 4cores, 6cores, 8cores, 12 cores (for types). This product is constructed with an inner EVA meltable adhesive tube, a polyolefin heat shrink outer tube and either single or dual strength members. Our single strength member sleeve which has become an industry standard, has an after shrink diameter of 4.9 X 4.4 mm, and utilizes a special glass member.

Minimum Order: 2000

Contact:
Phone:
Fax:
Email:
yuki
+8618981876882

Send Inquiry
Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou
Chengdu 611230
China
12/3/23 8:13 GMT
8F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve

Chengdu Focus Infra Materials Company manufacturing all kinds of Shrinkable Fiber Optic Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. Chengdu Focus Infra Materials company offers various type of fiber optic heat shrinkable sleeves for FTTH, FTTX, FTTP Network Project. The sleeve can be divided into two types(single and mass) according to the function. The single type is used for the single- fiber, and the mass type is used for the ribbon fiber. It is different in the reinforcement between two types. The single one realizes the reinforcement by the stainless steel needles, the later one via the ceramic reinforcement member to realize the function.Mass means there are several cores for the fiber. So the mass sleeve includes 4cores,6cores,8cores,12cores(for types).

Minimum Order: 5000

Contact:
Phone:
Fax:
Email:
yuki
+8618981876882

Send Inquiry
Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou
Chengdu 611230
China
12/3/23 8:10 GMT
12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve

Description: 12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve is designed forFlat fiber, normally it's 4 cores, 6 cores, 8 cores and 12 cores for choose. 12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve is applied to the optical fiber closure to fix and protect the optical fiber when splicing. 12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve can be divided into two types (single rod and ribbon rods) according to the function. 12F Single Ceramic Heat Shrink Protective Ribbon Fiber Splice Sleeve is constructed with an inner EVA meltable adhesive tube, a polyolefin heat shrink outer tube and either single or dual strength members. Our single strength member sleeve which has become an industry standard, has an after shrink diameter of 4.9 X 4.4 mm, and utilizes a special glass member. Feature: 1. Single holed (preshrunk)ends eliminates improper fiber threading 2. Smooth, deburred stainless steel reinforcing member ends decrease the risk of fiber damage during installation. 3. Extended liner length prevents contact between the fiber and ther backbone 4. Clear sleeve design persign permits easy centering of splice before heating 5. Sealing structure makes the splice free from effect of temperature and humidity from environment 6. Protecting splicing point 7. Improve mechanical strength 8. Simple operation, reducing the risk of fiber damage during installation. 9. Does not affect the optical characteristics of the optical fiber. 10. Sealing structure to have good resistance of temperature and humidity performance Applications: 1.Fusion splicing 2.Fiber cable protecting 3.FTTH system 4.Rack-mount & Wall-mount terminal box 5. Fiber Opitc Splice Closure 6. optical fiber switch box and so on continue protection

Minimum Order: 1000

Contact:
Phone:
Fax:
Email:
yuki
+8618981876882

Send Inquiry
Chengdu Focus Infra Materials Co.,Ltd
No.1760 Century Avenue Chongzhou
Chengdu 611230
China
12/1/23 9:38 GMT
100G WDM OTN Device Optical Transmission Network Solutions

PRODUCT DESCRIPTION OTN/DWDM 19" 5U 100G 200G Optical Transmission Network Solutions for Telecom/Datacenter/5G/Long Haul Network OSP3800 series is a compact, high-capacity, low-cost OTN optical transmission system introduced by Iseelink. It adopts a CWDM / DWDM common platform design, supports multi-service transparent transmission, and has flexible networking and access capabilities. Applicable to the national backbone network, provincial backbone network, metro backbone network, and other core networks, to meet the needs of large-capacity nodes above 1.6T, is the industry‘s most cost-effective transmission application platform. Build a large-capacity WDM transmission expansion solution for IDC and ISP operators. Product Features ● Standard 5U, 19", 20 slots ● Dual power supply AC/DC optional ● Multiple service card hybrid insertion ● Support 10G/100G/200G hybrid transmission Product Applications Telecom Datacenter 5G Network Long Haul Network Product Specification Function Note Product model OSP3800-1 OSP3800-2 OSP3800-4 OSP3800-5 Equipment 1U: (back-power supply) 2U: (back-power supply) 4U: (back-power supply) 5U: (back-power supply) Service slot 4 slots 8 slots 16 slots 20 slots Power consumption 120W (Max) 300 W (Max) 600 W (Max) 750W (Max) Max channel number CWDM: 18 wavelengths, DWDM: 96 wavelengths (50GHz) Single channel max rate 200Gbit/s Line side rate 1.25Gbit/s, 2.5Gbit/s, 8Gbit/s, 10Gbit/s, 16Gbit/s, 25Gbit/s, 40Gbit/s, 200Gbit/s Support service STM-1/4/16/64/256,OC-3/12/48/192/768 OT , U-1/2/3/4 FE/GE/10GE/25GE/40GE/100GE FC 1G/2G/4G/8G/16G/32G Clock features Support IEEE 1588V2 Network topology Point-to-point, chain type, star type, ring type Network level protection Optical channel 1+1 protection, optical multiplex 1+1 protection, optical line 1+1 protection Equipment level protection Power supply backup Network management SNMP, Web, CLI, Telnet Installation "19" and 23" cabinets, ETSI 300mm/600mm cabinets Wireless outdoor base station cabinet, FTTX outdoor cabinet, hanging wall Working temperature range -10℃~60℃ Working humidity range 5~95% no condensation Storage temperature range -40℃~85℃ Heat dissipation Fan cooling Power supply mode AC: 90 ~ 260V or DC: -36 ~ -72 V OSP3800 series includes the following cards NMS management card 100G QSFP28 to CFP transponder 2xQSFP28 to CFP2 200G Muxponder 100G Muxponder: QSFP28 ↔ 4xSFP28 40G&100G OEO: 6*QSFP28 SFP28 25G Quad transponder SFP+ Multi-Rate Quad transponder Redundant Multi-Rate Dual transponder EDFA Optical Amplifiers Bidi EDFA Optical Amplifiers 16ch DWDM MUX/DEMUX 40ch DWDM MUX/DEMUX(AAWG) OLP Optical Line Protector DWDM Passive Optical Add/Drop Multiplexers DCM card Schematic Diagram 100G WDM OTN Device Optical Transmission Network Solutions 0

Contact:
Phone:
Fax:
Email:
Ms. Evelyn
86-180-88882285
86-180-88882285
Send Inquiry
Shenzhen iseelink Communication Technology Co., Ltd.
4/F, 2-3 Building, Tongfuyu Industrial Zone, Aiqun Rd, Shiyan, Baoan District, Shenzhen, China
Shenzhen 518000
China
11/30/23 9:31 GMT
UIY RF Coaxial Isolator 10MHz ~ 50GHz

Design Features: 1.Can be dual junction even three for high isolation. 2.Military, space and commercial applications. 3.Custom design available upon request. 4.Guaranteed for one year standard. Packaging&Shipping: 1. , Packaging Details: Standard Export Carton Package. 2.Shipping Method: as below. 3.Delivery Time: 5-7 days after payment. 4.Payment: T/T, PayPal, Western Union 5.Others: Pls feel free to ask me, we will reply you soon. Our services: We support - Customize upon request We offer - ISO 9001 & ROHS Compliant We offer - HFSS Simulation (S Parameters) We guarantee - Good quality & One-year warranty We guarantee - Safe & Fast Delivery FAQ: 1. Question: when can I get the price? We usually quote within 24 hours after confirming the detailed requirements. If the situation is similar, we can quote immediately. 2. Question: what is the minimum order quantity? Minimum order 1 piece. 3. Question: when will the goods be delivered? the delivery time is usually about 7 - 14 days after ordering. 4. Question: do you only have this product? No, we can do other products, just need you to give the specific requirements of products and data or templates. 5. Question: what is the quality and quantity of your products? We have international common materials and different material products, and you can choose according to your needs. 6. Question: why do you choose us? Our products are complete in specifications, small in size, excellent in indicators and low in price. Our products are in full compliance with iso 9001 international standard, with high-precision testing equipment and QC team, and we have established a strict quality control system. We are committed to providing our customers with high-quality products for a long time.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Jesse Chen
+8613902992392
8675525999959
Send Inquiry
UIY Inc.
No. 8, Lane 1, Xintun East Zone, Longgang District
Shenzhen 518172
China
11/30/23 9:29 GMT
UIY RF Drop in Isolator 10MHz ~ 40GHz

Design Features: 1.Can be dual junction even three for high isolation. 2.Military, space and commercial applications. 3.Custom design available upon request. 4.Guaranteed for one year standard. Packaging&Shipping: 1.Packaging Details: Standard Export Carton Package. 2.Shipping Method: as below. 3.Delivery Time: 5-7 days after payment. 4.Payment: T/T, PayPal, Western Union 5.Others: Pls feel free to ask me, we will reply you soon. Our services: We support - Customize upon request We offer - ISO 9001 & ROHS Compliant We offer - HFSS Simulation (S Parameters) We guarantee - Good quality & One-year warranty We guarantee - Safe & Fast Delivery FAQ: 1. Question: when can I get the price? We usually quote within 24 hours after confirming the detailed requirements. If the situation is similar, we can quote immediately. 2. Question: what is the minimum order quantity? Minimum order 1 piece. 3. Question: when will the goods be delivered? the delivery time is usually about 7 - 14 days after ordering. 4. Question: do you only have this product? No, we can do other products, just need you to give the specific requirements of products and data or templates. 5. Question: what is the quality and quantity of your products? We have international common materials and different material products, and you can choose according to your needs. 6. Question: why do you choose us? Our products are complete in specifications, small in size, excellent in indicators and low in price. Our products are in full compliance with iso 9001 international standard, with high-precision testing equipment and QC team, and we have established a strict quality control system. We are committed to providing our customers with high-quality products for a long time.

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Jesse Chen
+8613902992392
8675525999959
Send Inquiry
UIY Inc.
No. 8, Lane 1, Xintun East Zone, Longgang District
Shenzhen 518172
China
11/30/23 9:27 GMT
UIY RF Surface Mount Isolator 200MHz ~ 15GHz

Product Name:RF Surface Mount Isolator Model Number:UIYSIxxxxA Frequency Range: 200MHz ~ 15GHz Forward Power (W): UP to 200W Peak Power (W): UP to 2000W Connector Type: SMT Temperature (°C): -40 ~ +85] Certification: RoHS · REACH · ISO9001 · ISO14001 Warranty:1 Year

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Jesse Chen
+8613902992392
8675525999959
Send Inquiry
UIY Inc.
No. 8, Lane 1, Xintun East Zone, Longgang District
Shenzhen 518172
China
11/30/23 9:21 GMT
High Isolation RF Microstrip Isolator 2.7~43GHz

Product Name Microstrip Isolator Model Number UIYMIxxxxA Frequency Range (GHz) 2.7 ~ 43 Connector Type Microstrip Temperature (°C) -55~+85 Certification RoHS · REACH · ISO9001 · ISO14001 Warranty 1 Year

Minimum Order: 1 bags

Contact:
Phone:
Fax:
Email:
Jesse Chen
+8613902992392
8675525999959
Send Inquiry
UIY Inc.
No. 8, Lane 1, Xintun East Zone, Longgang District
Shenzhen 518172
China
11/15/23 7:47 GMT
400GBASE XDR4 QSFP-DD 400G Optical Transceiver MTP MPO-12 2km Over SMF Tran

PRODUCT DESCRIPTION Features Compliant with IEEE802.3bs Standard: -400GAUI-8 Electrical Interface Compliant with IEEE 802.3cu Standards: -4x 100GBASE-FR1 Optical Interface Compliant with QSFP-DD MSA HW Rev 5.1 Type 2 Housing with MPO-12 Connector Compliant with QSFP-DD CMIS Rev 4.0 Two Wire Serial Interface with Digital Diagnostic Monitoring Complies with EU Directive 2011/65/EU (RoHS compliant) Class 1 Laser Applications 400GBASE-XDR Infiniband Interconnect Enterprise Networking Description The ZK-QDD-4H31MP-02 Module supports link lengths of up to 2km parallel SMF with MTP/MPO-12 connector. It is compliant to IEEE 802.3bs protocol and 400GAUI-8 standards. The 400 Gigabit Ethernet signal is carried over four parallel lanes by one wavelength per lane. It can be used as 4x100G breakout to QSFP28-DR-100G.

Contact:
Phone:
Fax:
Email:
Ms. Joa Chen
86-0755-89660635
86-0755-89660635
Send Inquiry
Shenzhen Zkosemi Semiconductor Technology Co., LTD.
Ambo Innovation Park, Baolong 4th Road,Baolong Street, Longgang District, Shenzhen, China
Shenzhen 518000
China


SOURCE: Import-Export Bulletin Board (https://www.imexbb.com/)
Result Page:   << Previous   |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   10  |   11  |   Next >>

Post an Offer to Sell
Home - Offers to Buy - Business Opportunities - Company Profiles

© 1996-2024 IMEXBB.com. All rights reserved.

IMEXBB.com