Telecommunications & Networks

Description JMY6202 is a series of RFID read/write module with UART, USB HID and IIC communication port. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is split. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. It connects outside antenna by 50ohm coaxial cable. The surface mount and very small module size are fit to portable devices. Main Characteristics • Module split antenna, connected by 50ohm coaxial cable, flexible antenna size and layout • EMV2010 certification ability • Surface mount and very small module size to fit portable devices • Low power consumption, could be set RF output level • Good Performance in EMC Qualifications • PCD type: NXP CL RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A，ISO14443B，ISO15693 • Card supported: see: module function configuration table • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Supported, default OFF, could be set • Power supply: DC 5V (±10%) • Interface: USB HID, IIC & UART (selected by SPS pin, recommend to use IIC) • Communication speed: IIC: 400Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: USB 2.0 HID • Max. command length: JCP04: 253bytes JCP05: 510bytes • Interface level: UART/IIC: 3.3V (TTL level; 5V tolerance) • Power consumption: Max.: 150mA Idle model: 100uA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 20mm*35mm*4.1mm (without Antenna) • Weight: About 10g (without Antenna) • ISP: Supported • RoHS：Supported • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY622 connects outside antenna by 50ohm coaxial cable. It fully supports ISO14443 and ISO15693 cards. It has EMV2010 certification ability, also could be set RF output level. The surface mount and very small module size design are fit to portable devices. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The module and antenna is split. The impedance between RF circuit and antenna was tuned by impedance analyzer, and then the module has excellent performance and stability. Main Characteristics • Module split antenna, connected by 50ohm coaxial cable, flexible antenna size and layout • EMV2010 certification ability • Surface mount and very small module size to fit portable devices • Low power consumption, could be set RF output level Qualifications • PCD: NXP MF RC531, SL RC400, CL RC632 • PCB Layers：4 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693 • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Termsed, default OFF, could be set • Data FLASH: 512 Bytes • Power supply: DC 3.3V & 5V (±10%) • Interface: UART and IIC • Interface level: UART / IIC: 3.3V (TTL level; 5V tolerance) • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max.: 150mA Normal model: 90mA Idle model: 100uA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 20mm * 35mm * 4.1mm (without Antenna) • Weight: About 10g (without Antenna) • ISP: Termsed • RoHS: By order • CE certification: in plan (Jan. 17, 2015) • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY6281 is integrated designing. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. JMY6281 has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. JMY6281 support NFC functions: Peer to Peer; Card Mode (PICC); Reader (PCD- VCD). Main Characteristics • Modules integrated antenna, excellent consistency and stability • Support UART or IIC, meanwhile be with USB HID interfaces • Light and slim • The module has a length of 506 bytes command buffer could send APDU over 256 bytes to T=CL smart cards and SAM cards. The modules support FSDI=8 of ISO14443-4. Qualifications • PCD: NXP PN512 CV520 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO18092 • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Supported, default OFF. The default state can be set. • Power supply: DC 5V (±10%) • Interface: USB HID and UART or IIC by order • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Max. command length: JCP04: 253bytes JCP05: 510bytes • Interface level: UART / IIC: 3.3V (TTL level; 5V tolerance, by pull up) • Power consumption: 100mA • Operating distance: 80mm (depending on card and antenna design) • Dimension: 50.8mm * 50.8mm * 5mm • Weight: About 20g • ISP: Supported • RoHS: Compliant • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY6804 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. Main Characteristics • Ferrite plate under the antenna, good performance for metal-around environments • EMV2010 certification ability in RF protocol part • 2 SAM slots, full fill payment system usage • USB HID interface, convenience to use on PC Qualifications • PCD model: NXP CL RC663 • PCB Layers：4 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693, ISO7816,NFC • Anti collision ability: Full function anti collision; be able to set multi- cards or single card • Auto detecting card: Supported, default OFF, could be set • SAM slots: 2, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps • Data FLASH: 512 Bytes • Power supply: DC 5V (±10%) • Interface: USB HID, RS232C, UART or IIC by order • Communication speed: IIC: Max.200Kbps UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps USB: 2.0 HID class • Interface level: UART / IIC 3.3V (5V tolerance) • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max. 150mA • Operating distance: 70mm (M1 typical distance, depending on card quality) • Dimension: 70mm * 50mm * 16.5mm • Weight: About 120g • ISP: Supported • RoHS: By order • CE certification: in plan (Jan.17,2015,soon) • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

Description JMY5041 is the second generation product based on JMY504 with UART and IIC serial port.JMY5041 has various functions and supports multi ISO/IEC standard of contactless card. The RFprotocol is complex. The designer combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module’s performance and stability. Qualifications • PCD model: NXP CV520、 PN512 • Working frequency: 13.56MHz • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Supported, default OFF. The default state can be set. • Power supply: DC 5V (±0.5V) • Interface: IIC & UART (selected by SPS pin, recommend to use IIC) • Communication rate: IIC: Max.200Kbps UART: 19200bps / 9600bps / 38400bps / 57600bps / 115200bps • Max.command length: JCP02 252 Bytes; JCP03 510 Bytes; JCP04 253 Bytes; JCP05 510 Bytes; • Interface level: 3.3V (TTL level; 5V tolerance) • Power consumption: 50mA • Operating distance: 100mm (depending on card and antenna design) • Dimension: 21 mm*42mm • Weight: About 15g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • ISP: Supported • RoHS: Compliant

Minimum Order: 1 bags

Description JMY5051 is the second generation product based on JMY505 with UART and IIC serial port. JMY5051 has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex. The designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. They are connecting by a 50ohm coaxial wire whose length is up to 1000cm in good situation. But the best length of the coaxial line is 60cm. Qualifications • PCD model: NXP CL RC663 • Working frequency: 13.56MHz • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Supported, default OFF. The default state can be set. • Power supply: DC 5V (±0.5V) • Interface: IIC & UART (selected by SPS pin, recommend to use IIC) • Communication rate: IIC: Max.200Kbps UART: 19200bps / 9600bps / 38400bps / 57600bps / 115200bps • Max.command length: JCP02 252 Bytes; JCP03 510 Bytes; JCP04 253 Bytes; JCP05 510 Bytes; • Interface level: 3.3V (TTL level; 5V tolerance) • Power consumption: 130mA • Operating distance: 100mm (depending on card and antenna design) • Dimension: 21 mm*42mm • Weight: About 15g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • ISP: Supported • RoHS: Compliant

Minimum Order: 1 bags

Description JMY5011 is the second generation product based on JMY501 with UART and IIC serial port.JMY5011 has various functions and supports multi ISO/IEC standard of contactless card. The RFprotocol is complex. The designer combined some frequent used command of RF card and then usercould operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 4 wires are linked the antenna and module. Normally the wire should be less than 200mm, or it will affect the module’s performance and stability. Qualifications • PCD model: NXP CL RC663 • Working frequency: 13.56MHz • Card supported: see: module function configuration table • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Supported, default OFF. The default state can be set. • Power supply: DC 5V (±0.5V) • Interface: IIC & UART (selected by SPS pin, recommend to use IIC) • Communication rate: IIC: Max.200Kbps UART: 19200bps / 9600bps / 38400bps / 57600bps / 115200bps • Max. command length: JCP02 252 Bytes; JCP03 510 Bytes; JCP04 253 Bytes; JCP05 510 Bytes; • Interface level: 3.3V (TTL level; 5V tolerance) • Power consumption: 130mA • Operating distance: 100mm (depending on card and antenna design) • Dimension: 21 mm*42mm • Weight: About 15g • Operating temperature: -25 ~ +85 ℃ (-77 ~ +185°F) • Storage temperature: -40 ~ +125 ℃ (-104 ~ +257°F) • ISP: Supported • RoHS: Compliant

Minimum Order: 1 bags

Description JMY6123 is a series of RFID read/write module. It has various functions and supports multi ISO/IEC standard of contactless card. The RF protocol is complex, but the designer combined some frequent used command of RF card and then user could operate the cards with full function by sending simple command to the module. The impedance between RF module and antenna was tuned by impedance analyzer. And then the module has excellent performance and stability. The module and antenna is split design. 50ohm coaxial cable are linked the antenna and module. Main Characteristics • Module split antenna, connected by 50ohm coaxial cable, flexible antenna size and layout • EMV2010 certification ability • Metal shield for electromagnetic shielding • 4 SAM slots and 512K bytes data FLASH, full fill payment system usage Qualifications • PCD model: NXP CL RC663 • Working frequency: 13.56MHz • RF standard: ISO14443A, ISO14443B, ISO15693, ISO7816, ISO18000-3MODE3 • Anti collision ability: Full function anti collision; be able to process multi-cards; be able to set operate single card only. • Auto detecting card: Termsed, default OFF, could be set • SAM slots: 4, T=0 & T=1 9600, 19200, 38400, 55800, 57600, 115200bps • Power supply: DC 5V (±10%) • Interface: RS232C, UART by order • Communication speed: UART: 19200bps, 9600bps, 38400bps, 57600bps, 115200bps • Interface level: UART 3.3V (5V tolerance) • Max. command length: JCP04: 253bytes JCP05: 510bytes • Power consumption: Max.150mA • Operating distance: 100mm (M1 typical distance, depending on card quality) • Dimension: 79mm * 55mm * 7.5mm (without Antenna) • Weight: About 30g (without Antenna) • ISP: Supported • RoHS: Compliant • Operating temperature: -25 to +85°C • Storage temperature: -40 to +125°C

Minimum Order: 1 bags

vehicle GPS tracking device real time app platform 4g GPS tracker GPS403A Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100

Original Coban vehicle gps tracker for fleet management free software platform GPS403 4G Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100

GPS Tracking system Truck Vehicle Gps Tracker GPS403A with fuel monitor Car GPS Tracker 4G Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100

Car GPS Tracker with Android APP 4G LTE GPS Tracking Device for Taxi Truck car and vehicle GPS403ACar GPS Tracker with Android APP 4G LTE GPS Tracking Device for Taxi Truck car and vehicle GPS403A Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100

vehicle GPS tracking device real time app platform 4g GPS tracker GPS403A Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100

Motorcycle GPS tracker GPS401C with gps tracker price gps car tracker with sms remote engine cut off Model:GPS403A/GPS403B < , ; , br>This tracker is based on the GSM / GPRS network and GPS satellite positioning system, which set multiple functions of security, positioning, monitoring surveillance, emergency alarms and tracking in its entirety. Multiple Tracking Ways: *Track by SMS with latitude and longitude *Real track by Cell phone with the maps link. *Tracking on with Mobile APP *Web based online tracking on PC at our server www.Gpstrackerxy.COM. Functions: GPS drift suppression Absolute street address by SMS Location based service (LBS) Voice Monitor Data logging Charges Inquiry Alarm Function Low battery alarm External Power off alarm GPS blind Spot alert SOS Geo-fence Multi-are , a management Movement alarm Over speed alarm ACC working alarm Alarms under Arm State 1 ACC alarm 2.Shock Sensor alarm Alarm without GSM network service Check the Vehicle State Sleep Mode Scheduled wake-up Set up Terminal (local) Time TCP / UDP Switch Configure parameters by USB GPRS setting Less GPRS traffic Modes Switch between "SMS" and "GPRS" Set up monitor center number Cut off the Oil anad Power System Warranty 1. One year warranty is provided for all models. 2. All products have been strictly Quality Checked in house before packing. 3. All products have been well packed before shipping. OEM&ODM Service 1.Customize logo and brand print on the device or box 2.Offer firmware modification service 3.Customize design in bulk order Contact Details Shenzhen Coban Electronics Co., Ltd ( GPS Tracker Manufacturer)

Minimum Order: 100