Telecommunications & Networks

MTP/MPO Trunk Cable is compact, high-density fiber optic connector assemblies designed for high-density applications. Our MTP/MPO Trunks are suitable for applications up to 100G for connecting equipment or interconnecting modules/panels within a data center. The MTP/MPO connectors come in Standard and Elite versions to accommodate various power budget requirements of our customers. Feature: USCONEC; SENKO; NISSIN; SUNCALL; Chinese brand Different MT inserts available (Base-8, Base-12,Base-16, Base-24) Color-Coded Connector Boots for Easy Identification Corning ClearCurve® YOFC Fiber with 7.5mm Min. Bend Radius Available OFNR、OFNP、CPR(B1ca/B2ca/Cca/Dca/Eca) Availa , ble in single sheath (2.0mm to 3.0mm, typically overall length ≤15m) and double sheath (4.5mm to 5.5mm) RoHS2 Certification Technical Parameters: Connector A MTP® Female (Pinless) Connector B MPO Female (Pinless) Polish Type UPC to UPC Glass Fiber Corning Clear Curve® Fiber Mode OS2 SMF 9/125μm Wavelength 850/1300nm Fiber Count 8 Fibers Polarity Type B Cable Outside Diameter(OD) 3.0mm-17.3mm Cable Jacket Plenum(OFNP) Min.Bend Radius(Optical Fiber) 7.5mm Min.Bend Radius (Fiber Cable) 20/10D(Dynamic/Static) Connector Durablity 500 times Tensile Strength(Long/ShortTerm) 80/240N Insertion Loss 0.35dB Max(0.15dB Typ.) Return Loss ≥20dB Attenuation at 850nm ≤2.3dB/km Attenuation at 1300nm ≤0.6dB/km Operating Temperature -10 to 70℃(14 to 158F) Storage Temperature -40 to 85℃ Glass Fiber Corning, YOFC Operating Temperature -10 to +70°C Applications: HPC(High-Performance Computing) Datacom DC(Data Center)& Hyperscale DC LAN and SAN Backbone Network 10G to 10G inter-connect/40G to 40G inter-connect/100G to 100G inter-connect of Base-12 or Base-24 800G QSFP-DD/OSFP DR8 and 800G OSFP XDR8 of Base-16

Bitmain Antminer L9 16G / 17G Litecoin Dogecoin miner +psu New $1 ,999 Usdt Bitmain Antminer L9 16G / 17G Litecoin Dogecoin miner +psu New $1 ,999 Usdt WASSP+60132067521 ( 1,999USDT ) IN Stock Bitmain Antminer L9 16G / 17G Litecoin Dogecoin miner +psu New Function - LTC+DOGE BELLS+JKC+LKY+PEP Scrypt Air-cooling Miner Power -3570W Size 195 x 290 x 379mm hashrate - 17Gh/s / 16Gh/s Interface - Ethernet Weight -13500g Asic miner stock : Bitmain Antminer , Whatsminer , Innosilicon ,Canaan ,AnexMiner, Goldshell, Hummer ,iBeLink, IceRiver ,iPollo , Jasminer, Nvidia, Msi Gpu . Warranty : yes Shipping : ( 20$ ) payments ( Bank TT , USD , BTC , USDC , USDT , DOGE , USDC 胡安 ASIC MINERS SUPPLIER #Dogecoin #DogecoinL9Asicminer #altcoins #litecoin #bitcoinminer #ethereum # #asiccoins #aleo #alph #bcn #btc #btm #ckb #dash #dcr #doge+ltc #etc #grin #grs #hns #kas #kda #lbc #litecoin #aleomining #aeboxii Telegram:asicmarketang Customer Support :Warehouse : Unit 05 ,5/F Fu Hang Industrial Building 1 Hok Yuen Hong Kong / Asia market WASSP+60132067521 / WASSP+85294197512

Minimum Order: 2 barrels

ASIC - Bitmain Antminer , Whatsminer , Innosilicon ,Canaan ,AnexMiner, Goldshell, Hummer ,iBeLink, IceRiver ,iPollo , Jasminer...WhatssassPP : +60132067521 ! ! ! stock ! ! ! IceRiver ALEO AE1 Lite 300 MH $800usdt in stock New IceRiver Aleo AE1 Lite 300mh 500w Iceriver ALEO AE1 Lite (300MH) Alephium Crypto ASIC Miner, Home Miner Low Noise IceRiver AE1 Lite ALEO Miner 300M ALEO Hashrate: 300 MH/s (±10%) Specifications: 300 MH/s, 100W Power : 500 W Size : 298 x 208 x 304 mm Total Weight: 4690g $800 USDT #Dogecoin #DogecoinL9Asicminer #altcoins #litecoin #bitcoinminer #ethereum #asiccoins #aleo #alph #bcn #btc #btm #ckb #dash #dcr #doge+ltc #etc #grin #grs #hns #kas #kda #lbc #litecoin #aleomining #aeboxii Warranty: 1 year Stock ! ! ! iceriver ks2 lite 2t miner iceriver al2 lite 2th/s iceriver alph al3 15th/s 3500w alephium miner alph mining iceriver rxd rx0 260gh/s 100w radiant miner rxd mining iceriver alph al0 400gh/s 100w alephium miner alph mining iceriver kas ks0 pro 200gh (psu included) iceriver kas ks0 ultra iceriver kaspa ks5l 12th kas iceriver kaspa ks5m 15th kas iceriver kaspa ks3 8th kas iceriver kaspa ks3m 6th kas iceriver kaspa ks2 2th kas iceriver kas ks0 pro 200gh iceriver kas ks0 100gh iceriver kaspa ks1 1th kas gpu

Minimum Order: 2 barrels

Bitcoin Miner S19k Pro 120T Bitmain BTC miners Sales price : $820 50$ Discount OFF $410 Bitcoin Miner S19k Pro 120T Bitmain Antminer BTC miners Model Bitcoin Miner S19k Pro 120T Bitmain Antminer BTC miners Function - BTC/BCH/BSV SHA256 Air-cooling Miner Specifications -120T 2760W 23J/T Crypto algorithm - SHA256 BTC/BCH/BSV Hashrate, TH/s 120 Power -Watt -2760W Voltage -12V Size - 195 x 290 x 370mm Noise level 75dB Interface Ethernet Gross weight - 14.5 kg BRAND New + Complete Accessories Model ASIC Mining Hardware Server : Bitmain Antminer , Whatsminer , Innosilicon ,Canaan ,AnexMiner, , Hummer ,iBeLink, IceRiver ,iPollo , Jasminer ..

Minimum Order: 2 barrels

Model NO.: UIYDDI5025A （https://www.uiy.com/Datasheet/UIYDDI5025A.pdf

Minimum Order: 1 bags

The RD03 low-altitude surveillance radar is a Ku-band phased array radar that adopts an all-solid-state, all-coherent pulse Doppler system. The target update rate can reach 3 seconds, allowing for all-weather detection and tracking of fast-moving "low, small, and slow" targets. This radar adopts azimuth mechanical scanning and elevation electronic scanning methods, offering higher cost-effectiveness compared to two-dimensional phased array and multi-beam radars. Parameter Index Frequency Band Ku-band Detection Distance ≥12km（RCS=0.01m²） Blind Spot 200m Angle Coverage Azimuth：0°~360°， Elevation：0°~30° Tracking Function Supports target tracking Speed Range 1m/s~100m/s Scanning Method Azimuth：Mechanical scanning，Elevation，phase scan Accuracy Distance＜10m， Azimuth：＜0.5°，Elevation：＜0.5° Targe , t Update Rate 6s/3s Port Network port Weight ≤35g Powered By AC220V Power Consumption ≤1300W

Production-ready 8X8 direct RF sampling with 4GHZ analog bandwidth 3U algorithm evaluation module InterWiser IWRFSOC8x8 3U algorithm evaluation modular system designed for integration into deployed RF systems with small size, low power consumption and real-time processing requirements. The IWRFSOC8x8Xilinx Zynq UltraScale+™ RFSoC Gen 1 is featured with 8 RF- ADCs and 8 RF-DACs. The IWRFSOC8x8 modules and comprehensive software suite, enables rapid prototyping, allowing you to develop application code for IWRFSOC8x8, conveniently shortening product development cycles for rapid verification and deployment. Sample code and tutorials demonstrate Xilinx RFSoC multi-tile synchronization (multi-converter synchronization) and multi- board synchronization analog capture. Performance indicators: FPGA chip Zynq UltraScale+ XCZU27DR-ffve1156 RFSoC RF interface X8ADC (12-bit, 4.096GSPS) ports X8DAC (14-bit, 6.554GSPS) port Optical port rate Compatible with 100Gbps/40Gbps (1) Compatible with 10Gbps (1) Memory PS 4xDDR4 (4GB, 64bit, 2400MT/s) PL 2xDDR4 (4GB, 64bit, 2666MT/s) Hard disk 1 SATA hard disk expansion interface (6G speed) Board power supply ATX power supply interface (DC +12V) PS interface 2x QSPI flash (512MB, 8bit) fixed configuration file 1x SATA .M2 hard disk expansion interface (6G speed) 1x 10/100/1000 Ethernet RGMII (RJ45) network port 1x USB_JTAG/UART debug interface 1x JTAG debug interface x Micro SD Card PL interface 8-channel ADC (12-bit, 4.096GSPS) port 8-channel DAC (14-bit, 6.554GSPS) port 2x GPIO X16 PMOD Port Clock Support external clock Power Consumption 25W (depending on the purpose, based on the actual measured value) Ambient temperature requirement -40℃~110℃ when working

IW-RFSOC-48DR-SYN digital-analog mixed signal processing card, using Xilinx ZYNQ UltraScale + RFSoC ZU48DR, can access large FPGA gate density, 8 ADC/DAC ports, expandable I/O ports and DDR4 memory, suitable for a variety of programmable applications, IW-RFSOC-48DR-SYN with ZU48DR FPGA is supported by 8 14-bit, 4GSPS sampling rate ADC and 8 14-bit, 9.85 GSPS sampling rate DAC ports. ADC and DAC ports are supported by high-performance micro RF connectors. IW-RFSOC-48DR-SYN is equipped with a high-pin count FPGA mezzanine card (FMC+) compliant with the Vita 57.4 standard and a large number of daughter card options to support extended functionality. It can provide a comprehensive RF signal chain to meet the demands of machine learning or optical wireless applications, such as Massive-MIMO remote radio units, millimeter wave mobile backhaul, 5G baseband, fixed wireless access, early warning/radar, wired Remote-PHY nodes, test and measurement, satellite communications and other high-performance RF applications.

IW-ZU27DR-2T8R is an algorithm evaluation board based on the Zynq UltraScale + RFSoC ZU27DR main chip (high-speed ADC and DAC are integrated inside the IC), supporting multi-board cascading. It provides a COTS solution that can provide the advantages of RFSoC while more effectively offloading data and enjoying the benefits of COTS: users get the fastest possible deployment while taking advantage of lower cost of ownership, lifecycle support and simplifying future technology insertion. This product supports 8-channel 12-bit ADC 4.096 GSPS and 8-channel 14-bit DAC 6.4 GSPS. Product Features Miniature design: 130mm×80mm size, weight less than 200g, 2 transmitters and 8 receivers, external J30J-21 and J30J-9 interfaces; Low power consumption: overall power consumption is less than 30 watts; Low latency: remove the high-speed serial interface between JESD204B analog and digital, greatly reducing system complexity and latency; RF direct acquisition: can directly acquire any IF signal within DC-4GHz in 8 channels, with a maximum instantaneous acquisition bandwidth of 2GHz;

The Mixed-signal processing card, which adopts the Xilinx ZYNQ UltraScale+ RFSoC ZU27DR as part of its Digital-Analog Hybrid Systems, provides access to large FPGA gate density, 2-channel ADC/DAC ports, expandable I/O ports, and DDR4 memory. It is suitable for various programmable applications. Equipped with the ZU47DR FPGA, the 2T2R supports 2 channels of 12-bit, 4.0 GSPS ADC, and 2 channels of 14-bit, 6.554 GSPS DAC ports. RF transmit and RF receive ports are connected externally via high-performance SMA  side-mounted RF connectors. The ZYNQ UltraScale+ RFSoC serves as the core processing system, featuring a rich set of peripheral interfaces for matching peripheral control signal transmission in signal processing. IW- RFSOC-2T2R board features a 40Gbps QSFP connector providing a 10Gbps SFP optical interface, capable of efficiently handling high-speed data in parallel with analog and digital conversion. The PS and PL are respectively equipped with 4GB DDR4 and 2GB DDR4 memory. It supports Micro SD card (supports UHS), 10/100/1000 Ethernet, USB JTAG/UART，and the board's JTAG loading mode shares the UART output, a RS232 interface，a GPS module，and a GPIO expansion interface for functional extensions.

RRU732U-NF/RRU532U-NF/RRU332U-NF is designed upon fully self-intellectual property. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. RRU732U-NF/IP can be widely applied in many RFID application systems such as logistics, access control, anti-counterfeit and industrial production process control system. Ex10 Multipurpose UHF RFID Reader FEATURES Self-intellectual property; Designed with IMPINJ E710/E510/E310 and support ISO18000-6C(EPC C1G2) protocol tag, featuring excellent multi-tag anti-collision functionality; 865~868MHz/902~928MHz frequency band(frequency customization optional); FHSS or Fix Frequency transmission; RF output power up to 27dbm(adjustable); Maximum inventory speed* up to 1000pcs/s (using E710) or 600pcs/s (using E510) or 350 pcs/s (using E310); Support RSSI, Tag buffer size up to 1000PCS@96bits EPC; Built-in antenna, typical reading effective distance ＜50cm* Low power dissipation with Type-C USB 3.0 power supply (POE optional); Support Type-C USB3.0 interface (Bluetooth 5.1 optional); Provide DLL and Demonstration Software Source code to facilitate further development.

RRU7881EA/ RRU5881EA/ RRU3881EA is a high-performance UHF RFID Reader. It is designed upon fully self-intellectual property. Based on proprietary efficient digital signal processing algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, access control, and industrial production process control system. Ex10 Fixed Reader FEATURES Self-intellectual property; Designed with IMPINJ E710/E510/E310 and support ISO18000-6C(EPC C1G2) protocol tag, featuring excellent multi-tag anti-collision functionality; 865~868MHz/902~928MHz frequency band(frequency customization optional); FHSS or Fix Frequency transmission; RF output power up to 33dbm(adjustable); Effective distance up to 12m*(with external 8dbi antenna and tag E41);  Supports multiple working modes such as active mode and answer mode; Low power dissipation with single +9~24VDC power supply; Support RSSI; Support RS232, RS485, Optional TCP/IP interface; Support on-the-site firmware upgrading; High reliability design, meet the requirements of harsh working environment; Support DLL , demonstrate the software source code and secondary development.

Based on the E310 chip design, Gen2 Extension Ready, ultimate small size, low power consumption, low cost, SMD form factor, maximum RF output of 27dBm, real- time temperature monitoring, making it the best choice for various small desktop and mobile devices.Additionally, sub-versions based on the E710 and E510 are available. Ex10 UHF RFID Module FEATURES Self-intellectual property; Designed with IMPINJ E710/E510/E310 and support ISO18000-6C(EPC C1G2) protocol tag, featuring excellent multi-tag anti-collision functionality; 865~868MHz/902~928MHz frequency band(frequency customization optional); FHSS or Fix Frequency transmission; RF output power up to 27dbm(adjustable); Positioning holes used to facilitate connection to external antenna; Effective distance up to 6m*(with external 8dbi antenna and tag E41); Maximum inventory speed up to 1000pcs/s (using E710) or 600pcs/s (using E510) or 350 pcs/s (using E310); Tag buffer size up to 1000PCS@96bits EPC; Low power dissipation with single +3.6~5.5VDC power supply; Support RSSI; Capable of continuous operation for 24 hours×365 days; Support on-the-site firmware upgrading.

The RRUx403OMP UHF RFID Printer Module, powered by the IMPINJ E series chip, is specifically designed for RFID printers, supporting temperature sensor tags and embedded applications. Based on the IMPINJ E710 chip design and Gen2 Extension Ready, it features a proprietary orthogonal decomposition algorithm for precise label positioning and calibration, enabling seamless operation in complex printing environments with densely packed small labels. This Single Port Module easily adapts to various RFID printer structures across multiple scenarios, perfectly meeting comprehensive printing needs. Sub-versions based on the E510 and E310 chips are also available. EATURES Self-intellectual property; Designed with IMPINJ E710/E510/E310 and support ISO18000-6C(EPC C1G2) protocol tag, featuring excellent multi-tag anti-collision functionality; 865~868MHz/902~928MHz frequency band(frequency customization optional); FHSS or Fix Frequency transmission; RF output power up to 30dbm(adjustable); IPEX socket for external antenna; Effective distance up to 10m*(with external 8dbi antenna and tag E41); Maximum inventory speed* up to 1000pcs/s (using E710) or 600pcs/s (using E510) or 350 pcs/s (using E310); Tag buffer size up to 1000PCS@96bits EPC; Low power dissipation with single +3.6~5.5VDC power supply; Support RSSI; High stability with air cooling and no extra heat sinking; Capable of continuous operation for 24 hours×365 days; Support on-the-site firmware upgrading.