Telecommunications & Networks

PSE908EX is a 9-port 100 Mbps unmanaged PoE switch independently developed by Shenzhen Lego Network Technology Co., Ltd. It provides 9 10/100M adaptive RJ45 ports, each of which supports MDI/MDIX automatic flipping function and can achieve line speed forwarding. Ports 1-8 have PoE function, support IEEE802.3af standard, can be used as power over Ethernet equipment, can automatically detect and identify power receiving equipment that meets relevant standards, and supply power to it through network cable. The PSE908EX is simple and convenient to use, without the need for configuration, plug and play, and can flexibly expand home and office networks without being limited by power line layout. • Port performance Provide 9 10/100M adaptive RJ45 ports, ports 1-8 have PoE function, and port 9 can be used as an uplink port, greatly improving the utilization rate of PoE power supply ports; Each port supports MDI/MDIX automatic flipping and self negotiation; Supports IEEE 802.3x full duplex flow control and Backpressure half duplex flow control. • PoE performance Support IEEE802.3af standard; Automatically detect and identify PD devices that comply with IEEE 802.3af standards and provide power to them; Supports 8 ports to achieve IEEE802.3af standard full load (15.4W) power supply, with a total power of 150W; Intelligent power management. If the power of the receiving device exceeds 123W, the system activates a priority mechanism to cut off the power supply to ports with lower priority. • Two working modes Provide mode switching switch, supporting two working modes: "normal switch mode" and "V-LAN mode"; When the standard switching mode is enabled, the switch is a regular non managed switch, and ports 1-9 can communicate with each other; Enable VLAN isolation mode, switch to MTU VLAN, and ports 1-8 can only communicate with port 9 of the uplink port; When enabling video monitoring mode, adjust the switch buffer to adapt to video monitoring applications and enable MTU VLAN.

Minimum Order: 1 bags

GPSE1082S Gigabit unmanaged Poe switch, 8 10/100/1000m adaptive RJ45 ports, 2 Gigabit RJ45 uplink ports, 2 independent gigabit optical SFP ports, 1 ~ 8 ports support Poe power supply, each port supports mdi/mdix automatic turnover function, and realizes line speed forwarding. It supports IEEE 802.3af/at standard, can be used as Ethernet power supply equipment, can automatically detect and identify the power receiving equipment that meets the standard, and supply power to it through the network cable. It is simple and convenient to use, without configuration, plug and play, and can flexibly expand home and office networks without being limited by power line layout. Key Features: -Compliance with IEEE802.3af/at, support full port advance standard detection -Safe: low power devices receive only the power they need -Safe and reliable power to WLAN access points -Automatic detection and protection of Non–standard Ethernet Terminals -Support Auto-MDI/MDI-X -Support Non-Blocking data forward -Support Auto-Negotiation and feature of store-and-forward -Plug-and-Play no configuration required -Internal power supply

Minimum Order: 1 bags

Model: ps1218tg Poe protocol: IEEE 802.3af/at Poe pin: compatible with two power supply modes, 12 / 36-a and 45 / 78-b Port rate: 10 / 100 / 1000Mbps Gigabit Poe separator Ps1218tg complies with IEEE 802.3af/at standard and has a transmission rate of 10 / 100 / 1000Mbps. ● support IEEE 802.3af/at Ethernet power supply standard ● support 10 / 100M and 10 / 100 / 1000m data transmission ● PD power receiving terminal supports 50-57v various voltage transfer, which is convenient for users to use UPS DC power supply ● it can provide 5V / 3.5A, 12V / 2a, 18V / 1A voltage, and adapt to various small network equipment ● circuit isolation protection, effective protection of electrical equipment ● high quality design effectively ensures the stability and reliability of the equipment Ps1218tg separator is an economical and practical Poe remote power receiving device with high performance and high reliability, which is based on IEEE 802.3af/at standard. It can separate the power transmitted through the network cable from the data signal. Ps-1218 can be used with power supply equipment (such as pse808) conforming to IEEE 802.3af and at standards to provide data and power supply for network equipment that does not support Poe at the same time. Ps-1218 can output three voltages of 5V / 12V / 18V. When used with power supply equipment, it can flexibly expand home network and office network without being limited by power line layout.

Minimum Order: 1 bags

Two models: POE5912 and POE5912G Compliant with IEEE 802.3af standard Provide three adjustable voltage outputs of 5V/9V/12VDC Maximum transmission distance up to 100 meters 100 Gigabit Ethernet port Plug and play, no management required The POE5912 separator is an economical, practical, high-performance, and highly reliable PoE remote power receiving device based on the IEEE 802.3af standard, which can separate power and data signals transmitted through network cables. When used in conjunction with power supply devices that comply with IEEE 802.3af standards (such as PSE908EX PSE1816G PSE802G), POE5912 can provide both data and power for network devices that do not support PoE. PoE5912 can output 5V/2A; 9V/1.1A; Three voltages of 12V/1A can be used together with power supply equipment to flexibly expand home network and office network without being restricted by power line layout.

Minimum Order: 1 bags

Model: pse803 characteristic: IEEE 802.3af compliant The maximum transmission power is 15.4W Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required explain: Pse803 single port 100M Ethernet power supply equipment is suitable for indoor use (please put it in a waterproof box outdoors). It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The device can provide a channel of Ethernet equipment, such as router, switch, wireless AP, network telephone, industrial network terminal, network camera, etc., which comply with ieee802.1 The POE power supply application of 3af / at international standard meets the requirements of providing efficient engineering in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment.

Minimum Order: 1 bags

PSE802BT single port Gigabit Ethernet power supply equipment is suitable for indoor use. It can work normally at 100vac ~ 240VAC input voltage. The power supply is connected with the network terminal equipment through super class 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can provide Poe power supply application conforming to ieee802.3af/at/bt international standard for one-way Ethernet equipment, such as advertising machine, small base station, switch, wireless AP, industrial network terminal, network camera, etc. Meet the requirements of providing efficient engineering solutions in places where power cannot be provided at the remote end or where Ethernet network cable power supply is used to improve system reliability and simplify equipment installation.. PSE802BT Features • 4-Pair power up to 90W • IEEE 802.3bt compliant - higher power • compatible with all IEEE 802.3at, 802.3af and legacy power supply devices • safety: low power devices only receive the required power, and 2 pairs of PDS receive power through 2 pairs • Ethernet power supply is safe and reliable • automatic detection and protection of non-standard Ethernet terminals • support for 10/100/1000baset applications • compact design for easy installation of WLAN access points

Minimum Order: 1 bags

PSE-156G IEEE 802.3at compliant The maximum transmission power is 60W Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required An important feature of pse156g is its ability to provide high power on all four pair Poe power supplies and Ethernet cables. Compared with dual core (two pair) products, pse156g can greatly improve performance and efficiency. The four pair Poe power supply enables the pse156g to maintain a low current level of 600mA while providing 60W power. This is in sharp contrast to similar two- wire devices. When providing 60W power, its current level is as high as 1.2A. In view of this, this more efficient pse156g can provide 51w power for PD loss when using CAT5 cable, while it can only provide 30W for two-wire solution. In addition to its 60W operation mode, pse156g can also be used to supply power to two-wire equipment, with a power of up to 30W. In this case, the midspan device still uses all four pairs of CAT5 and above cables, which can reduce the waste of up to 50% of the power on the cable. Compared with the traditional two core solution, the POE system with pse156g can reduce the energy loss by up to 15%.

Minimum Order: 1 bags

PSE801G Non standard Poe design, 48 ~ 56vdc output The maximum transmission power is 30W The maximum power supply distance is 100m Built in power supply, plug and play, no management required Pse801g single port Gigabit Ethernet power supply equipment. The power supply is suitable for indoor use (please put it in a waterproof box outdoors). It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can supply power for one-way Ethernet equipment, such as router, switch, wireless AP, network telephone, industrial network terminal, network camera and other Poe applications, and meet the requirements of providing efficient engineering services in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment

Minimum Order: 1 bags

PSE802G IEEE 802.3at compliant The maximum transmission power is 25.4w Poe transmission power supply distance up to 100m Automatic detection and identification of power receiving equipment and automatic matching of output power Built in power supply, plug and play, no management required Pse802g single port Gigabit Ethernet power supply equipment, The power supply is suitable for indoor use (please put a waterproof box outdoors. It can work normally at the input voltage of 100vac ~ 240VAC. The power supply is connected with the network terminal equipment through category 5 cables. It has an Ethernet data port and an output port after data and power synthesis. The equipment can be one-way Ethernet equipment, such as router, switch, wireless AP, network telephone and industrial network terminal , network camera, etc. shall be provided in accordance with IEEE802 The POE power supply application of 3af / at international standard meets the requirements of providing efficient engineering in places where it is impossible to provide power remotely or where Ethernet network cable power supply mode is adopted to improve system reliability and simplify equipment installation. At the same time, it can also be used with POE separator (such as ps5712, poe5912, etc.) to provide stable power supply and data transmission for non Poe equipment.

Minimum Order: 1 bags

1.CPU: MediaTek MTK6765 Octa (8)-core 2.3GHz; 2.Operation System: android 11.0 with GMS; 3.Display & Touch screen: 8 inch Capacitive 10-point Multi-touch G+F+F,Gorilla Corning Gen. 3th glass, IPS FHD screen 1200*1920 Pixels,450cd/m2 brightness,Sunlight readable; 4.4G Networks: support 2G GSM:B5/B8/B3=850/900/1800MHZ, 3G: WCDMA: B1/B5/B8=2100/850/900MHZ; TD-SCDMA:B34/B39;4G TDD LTE: B38/B39/B40/B41=2600/1900/2300/2500MHZ; FDD LTE: B1/B2/B3/B4/B5/B7/B8/B17 =2100/1900/1800/1700/850/2600/900/700MHZ,can work in North and South America； 5.Two Cameras: Front 5.0MP camera,Rear 13.0MP Camera; 6.Memory & Storage: 6GB ram + 128GB ROM, micro SD card slot support max 512GB; 7.Wireless network: 802.11 a/b/g/n/ac 2.4G+5Ghz dual-band wifi and blutooth V5.0; 8.Navigation and Location: Support GPS / Glonass/ Beidou; 9.Battery: Built-in 3.7V / 10000mAh Lithium Battery; 10.Rugged Durability: Waterproof and dustproof rate: IP68 (Certificated); Ruggedness: comply with MIL-STD-810G,1.2-1.5meter dropproof; 11.Stylus pen: active stylus, support original hand writing,is optional; 12.Work Temperature: -20°C to 60°C (with test report), Storage Temperature: -30°C to 70°C; 13.NFC:ST21 NFC module,13.56MHZ,support ISO14443A/B,ISO15693,mifare. 14.USB RJ45 Lan Ethernet adapter: optional; 15.Dimension:About 243*158*23mm, Net Weight: about 739g.

Minimum Order: 2 barrels

PRODUCT DESCRIPTION High quality cat5e utp BC/CCA lancable product description Name Lan Cable CAT5E UTP Conductor Material CCA Conductor Diameter 0.48 Conductor Insulation HDPE Jacket PVC,LSOH,FR-PVC,LSZH Certificates ISO,UL,ETL,CE,ROHS Length 305M Brand Lansan,OEM,ODM Lead Time Less than 500 boxes----within 10 days 500-2500 boxes----within 15 days 2500-20000 boxes----within 20 days (Lead time is negotiable when customer has special requirements.) product show BC CCA Condoctor Cat5e Lan Cable 0BC CCA Condoctor Cat5e Lan Cable 1 FAQ BC CCA Condoctor Cat5e Lan Cable 2

16 Port Outdoor Fiber Distribution Box Black Outdoor optical distribution Frame Description: Fiber optic terminal box is available for the distribution and terminal connection for various kinds of optical fiber system, especially suitable for mini-network terminal distribution, in which the optical cables, patch cores or pigtails are connected. Features: The box is made of ABS, and lifetime is more than 20 years. It also can be used under -30°c. Bi-layer structure design. The upper layer is for optical splitter, the other layer is for fiber splicing. Easy to operate. Usually installed as wall mounted in the building or at the green belt. It can accommodate 16 pcs SC Simplex or LC Duplex dapters. It can be designed to client requirements. It meets YD/T988-2007 standards. Application: FTTH access network CATV Networks Telecommunication Networks Data communications Networks Operation conditions: Temperatures:-40℃ — 60℃ Humidity:93% at 40℃ Air Pressure:62kPa – 101kPa

12VDC 10G Base-T to 10G Jumbo Frame SFP+ RJ45 to Fiber Ethernet Media Converter Model: LNK-10G-MC Series Overview E-link 10G Base-T to 10G Base-R Media Converter supports two types media for network connection such as 10GBase-T and 10GBase-FX. The bridge media converter is designed with a 10Gbase Ethernet PHY chip that connects two types segments operation smoothly. This converter can be used as standalone unit or as slide-in module to the 19" converter rack Chassis for use at a central wiring closet. Features Support Jumbo Frame Transparent Transport and very low delay Support DMI function for SFP+ fiber module Support Loopback test function Support hot plugging Full State Led display Easy installation Provide reliable long-distance connection Fast connection with multi-function Small portable size case Plug and play Application Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to- copper media converter for long distance transmission up to 120km Extend the network distance between two 10 Gigabit Fiber Switches across a fiber link up to 80km in length Convert your 10G SFP+ Direct Attach to multimode or single mode fiber. Technical Indexes Standards 1000Base-T, 2.5GBase-T, 5Gbase-T, 10Gbase-T 1000Base-X, 2500Base-X, 5GBase-R , 10GBase-R Media Supported 1000Base-T: Cat5 UTP/STP. MAX 100m; 2.5GBase-T: Cat5e UTP/STP. MAX 50m; 5GBase-T: Cat5e UTP/STP. MAX 50m; 10G Base-T: Cat6a UTP/STP. MAX 50m; Port Type RJ45, SFP Slot Work Mode 1000Base-T to 1000Base-X 2.5GBase-T to 2500Base-X 5Gbase-T to 5GBase-R 10Gbase-T to 10GBase-R Power Supply 12V DC Power consumption MAX 5W Operation Temperature 0℃ to 55℃ Relative Humidity 5% to 80% (non-condensation) Ordering Information Model Description LNK-MC10G-SFP+ 10G Base-T to 10G Base-R Media Converter, SFP+ Ports, not including SFP+ Modules

1200Mbps Dual Band 4G 5G Routers Gigabit Port 5G Router With SIM Card Slot Product Description Hardware: WS1208 uses the latest MTK wireless solution ,the MT7621A , the clock frequency is as high as 880MHZ, provide 5 gigabit Auto MDI/MDIX Ethernet port, 1×USB 3.0 port, 1×PCI-E ,1×SIM card , Wireless: Support IEEE802.11AC/N/G/B/A wireless protocol, max wireless rate could be 1200Mbps , 4×5Dbi high gain antennas , perform better and cover larger. Software: Preload the OpenWRT. Specification Technical Specification SOC MT7621A+MT7612E+MT7603E 880MHz dual-core MIPS1004Kc CPU RAM 128Mx16bit DDRIII SDRAM,16MB SPI Flash Supports up to 256Mx16bit DDRIII, 32MB SPI Flash Wireless Frequency Band Wi-Fi 1: 11b/g/n : 2.412~2.484 GHz Wi-Fi 2: 11a/n/ac : 5.180~5.825 GHz GPS:1565.42~1585.42 MHz Wireless Specification Maximum access rate of 1167Mbps (2.4G 300Mbps + 5G 867Mbps) PCBA size L200mm x W175mm x H17mm Maximum Power Consumption Max. power consumption 24W Physical Interface WAN x 1+LAN x 4 : RJ45 interface ,10/100/1000 Fast Ethernet Power connector: 5.5mm DC socket, DC12V2A power input USB interface: 1 USB3.0 female socket LTE interface: 1 MiNi PCI-E female connector, connects to USB2.0 interface LTE module, 1 drawer SIM card holder Buttons: 1 button to return to factory settings Power Requirements DC12V2A Wireless Settings Working Mode AP/WDS/Repeater Wireless mode 11b/ 11g /11n /11a /11ac Channel selection (Display the number of channels in different areas by country setting) Channel bandwidth (Auto, 20Mhz, 40Mhz, 80Mhz,) Receiving Sensitivity 802.11b -92dBm @ 1Mbps -83dBm @ 11Mbps 802.11ag -91dBm @ 6Mbps -76dBm @ 54Mbps 802.11n HT20 -91dBm @ MCS0 -70dBm @ MCS7 802.11n HT40 -88dBm @ MCS0 -67dBm @ MCS7 802.11ac HT80 -85dBm @ MCS0 -58dBm @ MCS9 Antenna External detachable 5DBi high gain omni-directional antenna Environmental and Physical Parameters Operating Temperature -20°C ~ 55°C Storage temperature -40°C ~ 70°C Humidity 0%~90% Typical, non-condensing Products Pictures 1200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 01200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 11200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 21200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 31200Mbps Dual Band 4G 5G Routers Gigabit Port With SIM Card Slot 4