Telecommunications & Networks

UPCOM IMC102G-GS is a rugged industrial grade, Din-Rail, layer2, Unmanaged Media Converter that supports 2-port 10/100/1000M Base-T(X) +1-port Gigabit SFP. Plug and play, easy to install, no configuration is required, can be operated at wide temperatures range from -40 to 75°C. IMC102G-GS adopts standard Industrial design, IP40 protection, aluminum alloy shell, support Din-rail or wall installation, fanless design, support EMC level 4 protection, DC12-48V or AC/DC220V optional, can meet the requirement of various Industrial automation, Data Center Network, Intelligent Transportation System, Electric Power Industry, and new energy applications. Support 2-port 10/100/1000M Base-T(X) + 1-port Gigabit SFP; Plug-and-play, no configuration is required; Support indicator status display; Support IP40 protection, aluminum alloy shell, fanless design; Support Broadcast storm suppression; Support DC12-48V or AC/DC 220V power supply; Power supply input support anti-reverse protection; Support over Voltage, over current, EMC protection; Support -40~75°C wide operating temperature range; DIN-Rail or wall Installation; Warranty:5years

Minimum Order: 1 bags

MC101 Ethernet Media Converter, also known as Fiber Optic Media Converter, is a networking device that transparently converts data between short- distance electrical signals and long-distance fiber optic signals, plug-and- play, no configuration required, can be operated at wide temperatures range from 0 to 50°C. UPCOM MC101 Fiber Media Converter support 1-port 10/100M Base-T(X)+1-port 100M FX, adopts durable metal housing, external DC5V, is a flexible and cost-effective solution that can extend transmission distances to 120km through a single-mode fiber, protecting data from noise and electromagnetic interference. MC101 is ultra-small in size, with shielded RJ45 Ethernet jack, optional SC/ST/FC fiber-optic connector. Built-in auto-sensing function supports full or half-duplex Ethernet operation, widely used in MAN (metropolitan area network), security monitoring, intelligent transportation and other applications. MC101 supports stand-alone installation, and can also be inserted into a 2U, 19",14 slots Rack-mount Chassis, with built-in LED indicators for easy diagnosing and monitoring status. including single-mode, multi-mode transmission modes, multi-mode can transmit 2km, single-mode can reach up to 120km. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX; Support MDI/MDI-X auto negotiation, 10M/100M adaptive； Support flow control; Supports full /half duplex, Point-to-point transparent transmission; Support non-blocking wire-speed forwarding; Plug-and-play, no configuration is required; LED indicators for easy diagnosis and monitoring work status; Support External power 5VDC input; Support 0-50°C wide operating temperature range; Low power consumption, No fan, Metal casing; Support stand-alone or wall Installation; Can insert to 2U 19", 14 slots Rackmount chassis; FCC Class A & CE approved, RoHS compliance; Warranty:3years

Minimum Order: 1 bags

MW2244G Modbus Gateway support 4-port RS485 + 4-port 10/100Base-T(X) + 2- port 100M FX with Modbus TCP and Modbus RTU protocol, adopts high-strength IP40 protective shell, industrial-grade EMC design, supports Auto- Negotiation adaptive technology, provides LED status indication, and supports voltage 12~48V DC power input to increase the reliability of the communication network. MW2244G can easily and conveniently centralize the management of scattered serial devices and hosts through the network. The communication rate supports 110~115200bps optional. Built-in Modbus TCP and Modbus RTU protocol, the user can easily realize Modbus Ethernet device and Modbus serial device connection. Based on industrial installation requirements, 35mm rail installation mode is provided. This product adopts the industry excellent network solution, and the operating temperature range is -40~85℃, which can meet the requirements of various industrial scenes and provide convenient serial communication solutions. Support 4-port RS485 + 4-port 10/100Base-T(X) + 2-port 100M FX ; Support 4-port serial isolation function, isolated voltage 500V AC; Support IEEE802.3/802.3u standard, store and forward Exchange Mode; Support TCP server, TCP client, UDP, Modbus TCP(RTU) transmission mode, 110~115200bps line speed non-blocking communication; Comply with TCP, IP, UDP, Modbus TCP, Modbus RTU, ARP, ICMP, HTTP, TFTP; Supports Modbus Slave mode, support up to 4 TCP master connections; Support Web management; Support serial port settings, can connect two serial devices via Ethernet; Supports gateway, cross-routing communication; Low-power consumption design; Metal housing with IP40 and high level EMC protection; Support wide voltage 12-48V DC power input; Support DIN-Rail Mounting or Wall Mounting installation; Working temperature range:-40~85°C; Warranty:5years

Minimum Order: 1 bags

MW1011 Din-Rail industrial serial server support 1-channel RS232/RS-485/422 + 1-port 10/100Base-T(X), adopts high-strength IP40 protective shell, industrial-grade EMC design, supports Auto-Negotiation adaptive technology, provides LED status indication, and supports voltage 12~48V DC power input to increase the reliability of the communication network. MW1011 can easily and conveniently centralize the management of scattered serial devices and hosts through the network. The communication rate supports 110~115200bps optional. Built-in Modbus TCP and Modbus RTU protocols, users can easily connect Modbus Ethernet devices and Modbus serial devices. Based on industrial installation requirements, 35mm rail installation mode is provided. This product adopts the industry excellent network solution, and the operating temperature range is -40~85℃, which can meet the requirements of various industrial scenes and provide convenient serial communication solutions. Support 1-port 10/100BASE-T(X) + 1-port RS232/RS-485/422; Support IEEE802.3/802.3u standard, store and forward Exchange Mode; Support TCP server, TCP client, UDP three serial transmission mode, 110~115200bps line speed non-blocking communication; Support TCP, UDP, ModbusTCP, ModbusRTU, ARP, ICMP, HTTP, TFTP; Support Modbus TCP(RTU_MASTER); Support Web management; Support serial port settings, can connect two serial devices via Ethernet; Supports gateway, cross-routing communication; Low-power consumption design; Metal housing with IP40 and high level EMC protection; Support redundant wide voltage 12-48V DC power input; Support DIN-Rail Mounting or Wall Mounting installation; Working temperature range:-40~85°C; Warranty:5years

Minimum Order: 1 bags

IES308-2F-2GS-404 is a 8-Port Serial Port Combo Managed Industrial Ethernet Switch which support 4-port 10/100M Base-T(X) +2-port Gigabit SFP + 1-port RS232+ 3-port RS485, is specially designed to meet the needs of flexible industrial applications, and provides a cost-effective Ethernet solution. Provides powerful management function that can be managed through a web browser, command line (CLI), and SNMP. Support a wide range of redundant power input (12-48V DC) to increase the reliability of the communication network. IES308-2F-2GS-404 can transmit the serial port data through Ethernet network, and the optical and electric combination can flexibly carry out according to the requirements of the service port. Base on the needs of industrial installation, DIN35 rail or wall mounting two installation modes provided. The product adopt with fan free, low power consumption, industrial grade design, - 40 ~ 85°C working temperature range, which can meet the requirements of various industrial sites and provide convenient Ethernet communication solutions. Support 4-port 10/100M Base-T(X) +2-port Gigabit SFP + 1-port RS232+ 3-port RS485; Support broadcast storm suppression function; Support port mirroring for online debugging and monitoring of network data status; Support QoS, IGMP, 802.1Q VLAN management function; Support unicast / multicast MAC address management; Support static IGMP multicast filtering; Support Web, CLI and SNMP three management modes; Support RSTP and MW-Ring, for Ethernet redundancy, ring network self- healing time < 20ms; Support three working modes of TCP server, TCP client and UDP; Adopt with high strength IP40 housing and industrial EMC design; Support redundant wide voltage 12-48V DC power input, full load power consumption less than 11W; Support DIN-Rail Mounting or Wall Mounting installation; Working temperature range:-40~85°C; Warranty:5years

Minimum Order: 1 bags

UPCOM IES3010-2GS is a rugged industrial grade, Din-Rail, layer2, Managed Ethernet switch which supports 8-port 10/100M RJ45 +2 Gigabit SFP ports. It provided some kinds of advanced network managed function, such as: MW-Ring redundancy technology (failure recovery time<20ms), VLAN, multicast, Quality of Service, Speed control, port mirroring, fault alarm and firmware remote update, also support CLI, WEB, Telnet, SNMP management, provide a user-friendly web console interface for easy configuration. IES3010-2GS adopts standard Industrial design, IP40 protection, aluminum alloy shell, support Din-rail or wall installation, fanless design, EMC level 4 protection, dual power DC12-48V or single AC/DC220V optional, can satisfied the requirement of various industrial applications such as Industrial automation, smart grid, rail transportation industry, safely city, and new energy applications. Support 8-port 10/100M RJ45 +2 Gigabit SFP ports; Support static multicast filtering, IGMP Snooping; Support MW-Ring redundancy technique (failure recovery time <20ms); Support STP/RSTP/MSTP; Support managed function such as VLAN, QoS, Trunking, and port mirroring; Support CLI, WEB, Telnet, SNMP management; Support RMON and private MIB table; Support firmware upgrade online; Support relay alarm output; Support indicator status display; Support IP40 protection, aluminum alloy shell, fanless design; Support Broadcast storm suppression; Support dual DC12-48V or single AC/DC 220V power supply; Power supply input support anti-reverse protection and non-polarity; Support over Voltage, over current, EMC protection; Support -40~75°C wide operating temperature range; DIN-Rail or wall Installation; Warranty:5years https://www.upcomnet.co , m/ , products/industrial-ethernet-switches-din-rail- managed-layer2-gigabit-552.html

Minimum Order: 1 bags

UPCOM IES405-F is a rugged industrial grade, Din-Rail, layer2, Unmanaged Ethernet switch that supports 4-port 10/100M Base-T(X) +1-port 100Base-FX. Plug and play, easy to install, no configuration is required, can be operated at wide temperatures range from -40 to 75°C. IES405-F adopts standard Industrial design, IP40 protection, aluminum alloy shell, support Din-rail or wall installation, fanless design, support EMC level 4 protection, Single power DC12-48V or single AC/DC220V optional, can meet the requirement of various Industrial automation, Data Center Network, Intelligent Transportation System, Electric Power Industry, and new energy applications. Support 4-port 10/100M Base-T(X) + 1-port 100Base-FX; Plug-and-play, no configuration is required; Support indicator status display; Support IP40 protection, aluminum alloy shell, fanless design; Support Broadcast storm suppression; Support Single DC12-48V or single AC/DC 220V power supply; Power supply input support anti-reverse protection and non-polarity; Support over Voltage, over current, EMC protection; Support -40~75°C wide operating temperature range; DIN-Rail or wall Installation; Warranty:5years

Minimum Order: 1 bags

Product Description 1.25Gb/s GLC-T 10/100/1000M Copper Ethernet SFP Transceiver 100m Description GLC-T10/100/1000 copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 10/100/1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 10/100/1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The GLC- T10/100/1000 supports 10/100/1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The GLC-T10/100/1000 provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh. Features Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Extended case temperature range (-40°C to +85°C ) Fully metallic enclosure for low EMI Low power dissipation Compact RJ-45 connector assembly Detailed product information in EEPROM +3.3V single power supply Access to physical layer IC via 2-wire serial bus 10/100/1000 BASE-T operation in host systems with SGMII interface Compliant with SFP MSA Compliant with IEEE Std 802.3TM-2002 Compliant with FCC 47 CFR Part 15, Class B RoHS Compliant Products Applications 1.25 Gigabit Ethernet over Cat 5 cable Switch/Router to Switch/Router Link High speed I/O for file severs Optical Parameters Parameter Symbol Min. Typical Max. Units Notes/Conditions Supply Current Is 320 375 mA 1.2W max power over full range of voltage and temperature. See caution note below Input Voltage Vcc 3.13 3.3 3.47 V Referenced to GND Surge Current Isurge 30 mA Hot plug above steady state current. See caution note Parameter Symbol Min. Max. Units Notes/Conditions SFP Output LOW VOL 0 0.5 V 4.7k to 10k pull-up to host_Vcc. SFP Output HIGH VOH host_Vcc -0.5 host_Vcc + 0.3 V 4.7k to 10k pull-up to host_Vcc. SFP Input LOW VIL 0 0.8 V 4.7k to 10k pull-up to Vcc. SFP Input HIGH 2 Vcc + 0.3 V V 4.7k to 10k pull-up to Vcc. Transmission Line-SFP Parameter Symbol Min. Typical Max. Units Notes/Conditions Line Frequency fL 125 MHz 5-level encoding, per IEEE 802.3 Tx Output Impedance Zout,TX 100 Ohm Differential Rx Input Impedance Zin,RX 100 Ohm Differential

Product Description 12F Fiber Optic MTP / MPO - 12 x LC Breakout Cable OM3 OM4 LSZH / PVC The MPO connector offers up to 12 times the density of standard connectors, providing significant space and cost savings. MPO connectors utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating. The MPO can be mass terminated in combinations of 4, 8, or 12 fiber ribbon cables. The MPO Adapter comes standard in black. Fiber Optic MTP / MPO - LC Breakout Cable - Features: Precision molded MT ferrule High precision guide pins for exact alignment Compact design, up to 4,8,12,24 fibers IEC 61754-7 Compliant EIA/TIA-604-5 Compliant Fiber Optic MTP / MPO - LC Breakout Cable - Applications: Telecommunication Networks Asynchronous Transmission Mode(ATM) Gigabit Ethernet Active Deviced/Transceiver Interface CATV, Video and Multimedia Premise Installations Telecommunication Networks Parallel optical interconnect between PC Cards and patch panels Interconnection for O/E modules Industrial & Military Optical Switch interframe connections Fiber Optic MTP / MPO - LC Breakout Cable - Specifications: Item LC,SC,ST,FC....... MPO/MTP End face type PC,UPC and APC PC and APC Fiber type SM(G652,G655,G657)；MM(OM1-OM5) Core number 12,24 Cable Diameter 0.9,2.0,3.0 Mini Round cable:Max4.5mm； Ribbon cable:Max3.0*5.0mm Insertion loss(dB) ≤ 0.3 Standard:≤0.35/0.7(Typical/Max) Low Loss:≤0.2/0.35(Typical/Max) Return loss(Min) UPC SM:40dB APC SM:60 dB PC MM:25 dB SM: APC:60dB MM: PC:20dB Test Wavelength (nm) SM:1310/1550 , MM:850/1300 Repeatability ≤ 0.1dB Durability ≤ 0.2dB Interchangeability ≤ 0.2dB Operating Temperature -20

Product Description Compatible Dell QSFP+ 40GE LR4 1310nm Duplex LC Fiber Transceiver Module Description This Dell® QSFP-40G-LR4 compatible QSFP+ transceiver provides 40GBase-LR4 throughput up to 10km over single-mode fiber (SMF) using a wavelength of 1270nm to 1330nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Dell® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. This transceiver is Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty. Features Hot-pluggable QSFP form factor Supports 39.8 Gb/s to 44.6 Gb/s 18.5 dB link insertion loss budget Single 3.3V power supply Maximum link length of 40km on Single Mode Fiber (SMF) Uncooled 4x10Gb/s CWDM transmitter XLPPI electrical interface Duplex LC receptacles Operating case temperature range: 0 to 70°C 3.5W maximum power dissipation RoHS-6 compliant (lead free) Application 40G Ethernet Infiniband QDR, DDR and SDR Datacenter and Enterprise networking Recommended Operating Environment Parameters Symbol Min. Typ. Max. Unit Case Operating Temperature TOP 0 - +7 , 0 °C Supply Voltage VCC +3.13 +3.3 +3.47 V Data Rate, per lane DR 10.3125 11.2 Gb/s Dat , a Rate Accuracy ΔDR -100 +100 ppm Bit Error Rate BER 10-12 Supply Current ICC 1000 mA Power Consumption P 2.5 3.5 W Transceiver Power-on Initialization Time 2000 ms Control Input Voltage High VIH 2.0 Vcc V Control Input Voltage Low VIL GND 0.7 V Control Output Voltage High VOH 2.0 Vcc V Control Output Voltage Low VOL GND 0.7 V Optical Parameters(TOP = -40 to 85°C, VCC = 3.135 to 3.465 Volts) Optical Transmitter Performance Parameters Symbol Min , . Typ. Max. Unit Note< , br> Operating Date Rate, per Lane DR 10.3125 11.2 Gb/s Total Average Launch Power TPAVG +8.3 dBm Average Launch Power, per Lane PAVG -7.0 +2.3 dBm Optical Modulation Amplitude (OMA), per lane POMA -5.0 +3.5 dBm 1 Difference in Launch Power between any two Lanes (OMA) PTX-DIFF 6.5 dB Transmitter Dispersion Penalty, per Lane TDP 2.3 dB Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), per Lane OMA- TDP -4.8 dB Optical Wavelength, each Lane λL0 1264.5 1271 , 1277.5 nm λL1 1284.5 1291 1297 , .5 nm λL2 1304.5 1311 1317 , .5 nm λL3 1324.5 1331 1337 , .5 nm Spectral Width (-20dB) Δλ 1 nm Side Mode Suppression Ratio SMSR 30 dB Optical Extinction Ratio ER 3.5 dB Optical Eye Mask { X1, X2, X3, Y1, Y2, Y3 } { 0.25, 0.4, 0.45, 0.25, 0.28, 0.4 } 2 Average Launch Power OFF, per Lane POFF -30 dBm Relative Intensity Noise (OMA) RIN -128 dB/Hz Optical Return Loss Tolerance ORLT 12 dB Transmitter Reflectance RTX -12 dB Input Differential Impedance ZIN 85 100 1 , 15 Ω Differential Data Input Voltage VIN-PP 150 1200 mVpp Optical Receiver Performance Parameters Symbol Min , . Typ. Max. Unit Note< , br> Operating Date Rate, per Lane DR 10.3125 11.2 Gb/s Damage Threshold, per Lane DTH +3.3 dBm 1 Average Receive Power, per Lane PRX-AVG -13.7 +2.3 dBm Receiver Power (OMA), per Lane PRX-OMA +3.5 dBm Receiver Sensitivity (OMA), per Lane SENAVG -11.5 dBm 2 Stressed Receiver Sensitivity (OMA), per Lane SENSOMA -9.9 dBm 3 Receiver Reflectance RRX -26 dB LOS De-Assert LOSD -15 dBm LOS Assert LOSA -30 dBm LOS Hysteresis LOSHY 0.5 dB Receiver Electrical 3dB upper Cutoff Frequency, per Lane FCUT 12.3 GHz Output Differential Impedance ZOUT 85 100 , 115 Ω Differential Data Output Voltage VOUT-PP 370 600 950 mVpp

Description: ADSS cable is made of non-metallic material and self-supporting with the aerial power transmission line. The tension resistance material is aramid yarn with high elasticity modules. And optimizing structure can deploy the weight of the cable and its mechanical and physical properties appropriately and minimize the load on the tower. Loose tube construction, tubes jelly filled, elements (tubes and filler rods) and water blocking yarn laid up around non-metallic central strength member,polyester yarns used to bind the cable core, water blocking tape longitudinally wrapped around the cable core, thenaramid yarn reinforced and PE outer sheath. Cable Mechanical characteristic core Cable diameter weight 2 core to 60core 12±0.5mm 140±5kg/km 72core 13±0.5mm 190±5kg/km 96core 14.5±0.5mm 220±5kg/km 144core 16.5±0.5mm 240±10kg/km Rec.daily max working tension 88kn Max. Allowable working tension 32.7kn Modulus of elasticity 37kn/mm2 Min Bending Radius(mm) operation 240mm installation 390mm Extra load Extra load 0.5%-0.7% Ice 5mm Wind speed 35m/s Corning ADSS Fiber Optic Cable 48 Strand Fiber Reinforced Plastic 0

Pre-terminated multi-fiber cables consist of optical fiber cable terminated with various types of connectors, such as the ST, FC, SC, LC, MU, MTRJ, E2000 Connector types. Our polishing craft and expertise ensure excellent optical performance. As a professional pre-terminated cable manufacturer, T&S produces multifiber cable assemblies that are composed of top-quality ceramic ferrules and fiber connector housings. All of our multifiber cables are ensured with a stable performance at a high-quality level. The Applications of Multifiber Cable We provide Pre-terminated multi-fiber cables (indoor/outdoor/breakout cable) for both single mode and multi-mode applications (SM and MM). This finds optical connectors and fiber/cable from the leading manufacturers of their application. FAQs of Pre-terminated Multifiber Cable What Is The Default Length Of Both Fanout Part (breakout Leg) And The Entire Length? Can It Be Customized? No default length is defined and you can customize the multifiber cable for sure. In most cases, the breakout leg is 0.5m according to our record. The longest breakout leg could be 3.0m or longer and it depends. Will A 50m Pre-terminated Cable Be Shipped With Being Pack On A Spool?  Basically, a piece of cable will be packaged with a spool when its length reaches up to 100m for ordinary structures. There're wooden spools, plastic spools and paper spools for you to choose from. Please contact T&S sales team on your specific cases for more packing details of multifiber cables. What's The Largest Fiber Count Of Pre-terminated Multi-fiber Cable T&s Can Offer? So far, the largest fiber count of pre-terminated multi-fiber we are offering is 576-fiber. In most cases, fiber count is not the key element for pre-termination if a cable with even more fibers is attainable. How Much Does It Cost To Terminate Fiber Optic Cable? Since the customization of our multifiber cable is available, the price of terminating a fiber optic cable can vary greatly from one order to another. For more accurate information, please feel free to contact our sales team. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.

LC or SC loopback or other customized, SM and MM fiber type for option, optical information routine exchange or test and equipment required, LC loopback is RJ-45 style interface. All loopback is compliant to Telcordia, IEC and EIA/TIA standard. Features of LC/SC Loopback Duplex connector or multi-fiber connector MPO or MTP connector(for multi-fiber connector) Standard loss or low loss(for multi-fiber connector) PC or APC polish Cable form or housing form Available in G.652, G.657, OM1, OM2, OM3, OM4 fiber Option for LSZH, OFNR or OFNP cable jacket Option for A, B or C polarity or Customized(for multi-fiber connector) Customized length available(multi-fiber connector≥15cm; duplex connector≥7.5cm) 100% factory terminated and tested Applications of LC/SC Loopback System loop test Optical loop test Aging and testing of the system Standards Compliance of LC/SC Loopback TIA/EIA-568.3-D ISO/IEC 11801 IEC-61754-7 IEC61754-20 IEC61754-4 EIA/TIA-604-5 GR-1435-CO , RE GR-326-CORE NFPA 262 or IEC 60332 Compliant to Directive 2002/95/EC (RoHS) REACH SvHC EN 50575 Specifications of LC/SC Loopback General Specification Construction Description Fiber Count 2fibers for duplex type; 2-24fibers for multi-fiber connector Fiber Mode Single mode: OS2/G657 9/125um Multimode: OM1 62.5/125 um OM2 OM3OM4 50/125um; Fiber Brand Corning SMF-28® Ultra optical fiber Corning ClearCurve® multimode fiber Cable Jacket Ratings Low Smoke Zero Halogen (LSZH) Riser (OFNR) Plenum (OFNP) Cable Jacket Color OS2/G657: Yellow OM1&OM2: Orange OM3: Aqua; OM4: Aqua/Magenta or Customized Polarity Type A, Type B, Type C (TIA-568.3-D) or Customized Connector Type SC LC MPO MTP Connector Color (SC LC) SM(APC) SM(PC) OM3 OM4 or customized Green Blue Aqua Magenta/Aqua Connector Color (MPO MTP) SM(APC) SM(PC) OM3 OM4 or customized Low Loss Yellow Yellow Aqua Magenta/Aqua Standard Green Blue Aqua Magenta/Aqua Loopback housing color black Operating Temperature -20°C to + 70°C Storage Temperature -40°C to + 85°C Technical Specification Optical Properties Singlemode Multimode Insertion Loss (dB) APC ≤ 0.30 (Typical:≤ 0.15 ) UPC ≤ 0.20 (Typical:≤ 0.1 ) APC ≤ 0.30 (Typical:≤ 0.10 ) PC ≤ 0.20 (Typical:≤ 0.1 ) Insertion Loss (dB) Low loss≤ 0.35 (Typical:≤ 0.25 ) Low loss≤ 0.35 (Typical:≤ 0.2 ) Standard Loss≤0.75 (Typical:≤ 0.4 ) Standard Loss≤ 0.6 (Typical:≤ 0.35 ) Return Loss (dB) PC≥50; APC≥60 PC≥20; APC≥40 Wavelength (nm) Singlemode: 1310/1550, Multimode: 850/1300 Fiber Attenuation (dB/km) Singlemode: ≤0.35 at 1310nm, ≤0.2 at 1550nm Multimode: ≤2.3 at 850nm, ≤0.6 at 1300nm Transmission Distance OM4: 150m at 40/100G, 550m at 10G OM3: 100m at 40/100G, 300m at 10G Housing and Pull-tab of LC/SC Loopback The loopback is both ends of fiber in a duplex connector or a multi-fiber connector, then the optical signal in the same connector, don't change signals or repeated back to its itself. It can provide an effective solution, test the emission ability of the network equipment and receive sensitivity, especially in 40/100G network communication through back signal positioning can be all kinds of potential phenomenon, so as to achieve optical fiber network in pairs on a single element or interface and effective test and evaluation of the Internet. T&S Communications is a professional fiber optic products supplier. We provide WDMs, Fiber Optic Component and so on. Want to know about ts communication? Please contact us.

The MT ferrule is a multi-fiber, plastic ferrule with a square end-face of 6.4x2.5 mm and fiber pitch 0.25mm, widely applied in MPO connectors and AOC cables. 12 and 24-fiber MT ferrules are the most commonly used types. Features of MT Ferrule MT ferrules manufactured by high precision mold technology meet international standards such as IEC 61754-3-31, GR-135 etc. Specification of MT Ferrule Ferrule Type Fiber Hole Diameter (mm) Guide Pin Hole Diameter (mm) Insertion Loss（dB） 12-Fiber MM Standard 0.1255+0.002/-0 0.7±0.001 Typical=0.25 max≤0.5 MM Low Loss 0.1255+0.002/-0 0.7+0/-0.001 Typical=0.12 max≤0.35 SM Standard 0.1250+0.001/-0 0.7+0/-0.001 Typical=0.25 max≤0.7 SM Low Loss 0.1250+0.0007/-0 0.6990+0.0006/-0 Typical=0.12 max≤0.35 24-Fiber MM Standard 0.1255+0.002/-0 0.7±0.001 Typical=0.25 max≤0.5 MM Low Loss 0.1255+0.002/-0 0.7+0/-0.001 Typical=0.12 max≤0.35 SM Standard 0.1250+0.001/-0 0.7+0/-0.001 Typical=0.25 max≤0.7 SM Low Loss 0.1250+0.0007/-0 0.6990+0.0006/-0 Typical=0.12 max≤0.35 T&S Communications is one of professional fiber optic accessories suppliers. We provide WDMs, Fiber Optic Component and so on. Want to know more? Please contact us.